mastodon/db/schema.rb

1025 lines
46 KiB
Ruby
Raw Normal View History

2016-02-20 21:53:20 +00:00
# This file is auto-generated from the current state of the database. Instead
# of editing this file, please use the migrations feature of Active Record to
# incrementally modify your database, and then regenerate this schema definition.
#
# Note that this schema.rb definition is the authoritative source for your
# database schema. If you need to create the application database on another
# system, you should be using db:schema:load, not running all the migrations
# from scratch. The latter is a flawed and unsustainable approach (the more migrations
# you'll amass, the slower it'll run and the greater likelihood for issues).
#
# It's strongly recommended that you check this file into your version control system.
Add WebAuthn as an alternative 2FA method (#14466) * feat: add possibility of adding WebAuthn security keys to use as 2FA This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor to the Settings page for editing the 2FA methods – now it will list the methods that are available to the user (TOTP and WebAuthn) and from there they'll be able to add or remove any of them. Also, it's worth mentioning that for enabling WebAuthn it's required to have TOTP enabled, so the first time that you go to the 2FA Settings page, you'll be asked to set it up. This work was inspired by the one donde by Github in their platform, and despite it could be approached in different ways, we decided to go with this one given that we feel that this gives a great UX. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add request for WebAuthn as second factor at login if enabled This commits adds the feature for using WebAuthn as a second factor for login when enabled. If users have WebAuthn enabled, now a page requesting for the use of a WebAuthn credential for log in will appear, although a link redirecting to the old page for logging in using a two-factor code will also be present. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add possibility of deleting WebAuthn Credentials Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: disable WebAuthn when an Admin disables 2FA for a user Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: remove ability to disable TOTP leaving only WebAuthn as 2FA Following examples form other platforms like Github, we decided to make Webauthn 2FA secondary to 2FA with TOTP, so that we removed the possibility of removing TOTP authentication only, leaving users with just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA' in order to remove second factor auth. The reason for WebAuthn being secondary to TOPT is that in that way, users will still be able to log in using their code from their phone's application if they don't have their security keys with them – or maybe even lost them. * We had to change a little the flow for setting up TOTP, given that now it's possible to setting up again if you already had TOTP, in order to let users modify their authenticator app – given that now it's not possible for them to disable TOTP and set it up again with another authenticator app. So, basically, now instead of storing the new `otp_secret` in the user, we store it in the session until the process of set up is finished. This was because, as it was before, when users clicked on 'Edit' in the new two-factor methods lists page, but then went back without finishing the flow, their `otp_secret` had been changed therefore invalidating their previous authenticator app, making them unable to log in again using TOTP. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * refactor: fix eslint errors The PR build was failing given that linting returning some errors. This commit attempts to fix them. * refactor: normalize i18n translations The build was failing given that i18n translations files were not normalized. This commits fixes that. * refactor: avoid having the webauthn gem locked to a specific version * refactor: use symbols for routes without '/' * refactor: avoid sending webauthn disabled email when 2FA is disabled When an admins disable 2FA for users, we were sending two mails to them, one notifying that 2FA was disabled and the other to notify that WebAuthn was disabled. As the second one is redundant since the first email includes it, we can remove it and send just one email to users. * refactor: avoid creating new env variable for webauthn_origin config * refactor: improve flash error messages for webauthn pages Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
2020-08-24 14:46:27 +00:00
ActiveRecord::Schema.define(version: 2020_06_30_190544) do
2016-02-20 21:53:20 +00:00
# These are extensions that must be enabled in order to support this database
enable_extension "plpgsql"
create_table "account_aliases", force: :cascade do |t|
t.bigint "account_id"
t.string "acct", default: "", null: false
t.string "uri", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_account_aliases_on_account_id"
end
create_table "account_conversations", force: :cascade do |t|
t.bigint "account_id"
t.bigint "conversation_id"
t.bigint "participant_account_ids", default: [], null: false, array: true
t.bigint "status_ids", default: [], null: false, array: true
t.bigint "last_status_id"
t.integer "lock_version", default: 0, null: false
t.boolean "unread", default: false, null: false
t.index ["account_id", "conversation_id", "participant_account_ids"], name: "index_unique_conversations", unique: true
t.index ["conversation_id"], name: "index_account_conversations_on_conversation_id"
end
create_table "account_domain_blocks", force: :cascade do |t|
t.string "domain"
Account domain blocks (#2381) * Add <ostatus:conversation /> tag to Atom input/output Only uses ref attribute (not href) because href would be the alternate link that's always included also. Creates new conversation for every non-reply status. Carries over conversation for every reply. Keeps remote URIs verbatim, generates local URIs on the fly like the rest of them. * Conversation muting - prevents notifications that reference a conversation (including replies, favourites, reblogs) from being created. API endpoints /api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute Currently no way to tell when a status/conversation is muted, so the web UI only has a "disable notifications" button, doesn't work as a toggle * Display "Dismiss notifications" on all statuses in notifications column, not just own * Add "muted" as a boolean attribute on statuses JSON For now always false on contained reblogs, since it's only relevant for statuses returned from the notifications endpoint, which are not nested Remove "Disable notifications" from detailed status view, since it's only relevant in the notifications column * Up max class length * Remove pending test for conversation mute * Add tests, clean up * Rename to "mute conversation" and "unmute conversation" * Raise validation error when trying to mute/unmute status without conversation * Adding account domain blocks that filter notifications and public timelines * Add tests for domain blocks in notifications, public timelines Filter reblogs of blocked domains from home * Add API for listing and creating account domain blocks * API for creating/deleting domain blocks, tests for Status#ancestors and Status#descendants, filter domain blocks from them * Filter domains in streaming API * Update account_domain_block_spec.rb
2017-05-18 23:14:30 +00:00
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id"
t.index ["account_id", "domain"], name: "index_account_domain_blocks_on_account_id_and_domain", unique: true
Account domain blocks (#2381) * Add <ostatus:conversation /> tag to Atom input/output Only uses ref attribute (not href) because href would be the alternate link that's always included also. Creates new conversation for every non-reply status. Carries over conversation for every reply. Keeps remote URIs verbatim, generates local URIs on the fly like the rest of them. * Conversation muting - prevents notifications that reference a conversation (including replies, favourites, reblogs) from being created. API endpoints /api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute Currently no way to tell when a status/conversation is muted, so the web UI only has a "disable notifications" button, doesn't work as a toggle * Display "Dismiss notifications" on all statuses in notifications column, not just own * Add "muted" as a boolean attribute on statuses JSON For now always false on contained reblogs, since it's only relevant for statuses returned from the notifications endpoint, which are not nested Remove "Disable notifications" from detailed status view, since it's only relevant in the notifications column * Up max class length * Remove pending test for conversation mute * Add tests, clean up * Rename to "mute conversation" and "unmute conversation" * Raise validation error when trying to mute/unmute status without conversation * Adding account domain blocks that filter notifications and public timelines * Add tests for domain blocks in notifications, public timelines Filter reblogs of blocked domains from home * Add API for listing and creating account domain blocks * API for creating/deleting domain blocks, tests for Status#ancestors and Status#descendants, filter domain blocks from them * Filter domains in streaming API * Update account_domain_block_spec.rb
2017-05-18 23:14:30 +00:00
end
Add Keybase integration (#10297) * create account_identity_proofs table * add endpoint for keybase to check local proofs * add async task to update validity and liveness of proofs from keybase * first pass keybase proof CRUD * second pass keybase proof creation * clean up proof list and add badges * add avatar url to keybase api * Always highlight the “Identity Proofs” navigation item when interacting with proofs. * Update translations. * Add profile URL. * Reorder proofs. * Add proofs to bio. * Update settings/identity_proofs front-end. * Use `link_to`. * Only encode query params if they exist. URLs without params had a trailing `?`. * Only show live proofs. * change valid to active in proof list and update liveness before displaying * minor fixes * add keybase config at well-known path * extremely naive feature flagging off the identity proof UI * fixes for rubocop * make identity proofs page resilient to potential keybase issues * normalize i18n * tweaks for brakeman * remove two unused translations * cleanup and add more localizations * make keybase_contacts an admin setting * fix ExternalProofService my_domain * use Addressable::URI in identity proofs * use active model serializer for keybase proof config * more cleanup of keybase proof config * rename proof is_valid and is_live to proof_valid and proof_live * cleanup * assorted tweaks for more robust communication with keybase * Clean up * Small fixes * Display verified identity identically to verified links * Clean up unused CSS * Add caching for Keybase avatar URLs * Remove keybase_contacts setting
2019-03-18 20:00:55 +00:00
create_table "account_identity_proofs", force: :cascade do |t|
t.bigint "account_id"
t.string "provider", default: "", null: false
t.string "provider_username", default: "", null: false
t.text "token", default: "", null: false
t.boolean "verified", default: false, null: false
t.boolean "live", default: false, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id", "provider", "provider_username"], name: "index_account_proofs_on_account_and_provider_and_username", unique: true
end
create_table "account_migrations", force: :cascade do |t|
t.bigint "account_id"
t.string "acct", default: "", null: false
t.bigint "followers_count", default: 0, null: false
t.bigint "target_account_id"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_account_migrations_on_account_id"
t.index ["target_account_id"], name: "index_account_migrations_on_target_account_id"
end
create_table "account_moderation_notes", force: :cascade do |t|
t.text "content", null: false
t.bigint "account_id", null: false
t.bigint "target_account_id", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_account_moderation_notes_on_account_id"
t.index ["target_account_id"], name: "index_account_moderation_notes_on_target_account_id"
end
create_table "account_notes", force: :cascade do |t|
t.bigint "account_id"
t.bigint "target_account_id"
t.text "comment", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id", "target_account_id"], name: "index_account_notes_on_account_id_and_target_account_id", unique: true
t.index ["target_account_id"], name: "index_account_notes_on_target_account_id"
end
create_table "account_pins", force: :cascade do |t|
t.bigint "account_id"
t.bigint "target_account_id"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id", "target_account_id"], name: "index_account_pins_on_account_id_and_target_account_id", unique: true
t.index ["target_account_id"], name: "index_account_pins_on_target_account_id"
end
create_table "account_stats", force: :cascade do |t|
t.bigint "account_id", null: false
t.bigint "statuses_count", default: 0, null: false
t.bigint "following_count", default: 0, null: false
t.bigint "followers_count", default: 0, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.datetime "last_status_at"
t.integer "lock_version", default: 0, null: false
t.index ["account_id"], name: "index_account_stats_on_account_id", unique: true
end
create_table "account_tag_stats", force: :cascade do |t|
t.bigint "tag_id", null: false
t.bigint "accounts_count", default: 0, null: false
t.boolean "hidden", default: false, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["tag_id"], name: "index_account_tag_stats_on_tag_id", unique: true
end
create_table "account_warning_presets", force: :cascade do |t|
t.text "text", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.string "title", default: "", null: false
end
create_table "account_warnings", force: :cascade do |t|
t.bigint "account_id"
t.bigint "target_account_id"
t.integer "action", default: 0, null: false
t.text "text", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_account_warnings_on_account_id"
t.index ["target_account_id"], name: "index_account_warnings_on_target_account_id"
end
create_table "accounts", force: :cascade do |t|
t.string "username", default: "", null: false
t.string "domain"
t.string "secret", default: "", null: false
t.text "private_key"
t.text "public_key", default: "", null: false
t.string "remote_url", default: "", null: false
t.string "salmon_url", default: "", null: false
t.string "hub_url", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.text "note", default: "", null: false
t.string "display_name", default: "", null: false
t.string "uri", default: "", null: false
t.string "url"
t.string "avatar_file_name"
t.string "avatar_content_type"
t.integer "avatar_file_size"
t.datetime "avatar_updated_at"
t.string "header_file_name"
t.string "header_content_type"
t.integer "header_file_size"
t.datetime "header_updated_at"
t.string "avatar_remote_url"
t.datetime "subscription_expires_at"
t.boolean "locked", default: false, null: false
t.string "header_remote_url", default: "", null: false
t.datetime "last_webfingered_at"
t.string "inbox_url", default: "", null: false
t.string "outbox_url", default: "", null: false
t.string "shared_inbox_url", default: "", null: false
t.string "followers_url", default: "", null: false
t.integer "protocol", default: 0, null: false
t.boolean "memorial", default: false, null: false
t.bigint "moved_to_account_id"
t.string "featured_collection_url"
t.jsonb "fields"
t.string "actor_type"
t.boolean "discoverable"
2018-12-29 01:24:36 +00:00
t.string "also_known_as", array: true
t.datetime "silenced_at"
t.datetime "suspended_at"
t.integer "trust_level"
t.boolean "hide_collections"
t.integer "avatar_storage_schema_version"
t.integer "header_storage_schema_version"
2020-06-02 17:24:53 +00:00
t.string "devices_url"
t.index "(((setweight(to_tsvector('simple'::regconfig, (display_name)::text), 'A'::\"char\") || setweight(to_tsvector('simple'::regconfig, (username)::text), 'B'::\"char\")) || setweight(to_tsvector('simple'::regconfig, (COALESCE(domain, ''::character varying))::text), 'C'::\"char\")))", name: "search_index", using: :gin
t.index "lower((username)::text), COALESCE(lower((domain)::text), ''::text)", name: "index_accounts_on_username_and_domain_lower", unique: true
t.index ["moved_to_account_id"], name: "index_accounts_on_moved_to_account_id"
t.index ["uri"], name: "index_accounts_on_uri"
t.index ["url"], name: "index_accounts_on_url"
2016-02-20 21:53:20 +00:00
end
create_table "accounts_tags", id: false, force: :cascade do |t|
t.bigint "account_id", null: false
t.bigint "tag_id", null: false
t.index ["account_id", "tag_id"], name: "index_accounts_tags_on_account_id_and_tag_id"
t.index ["tag_id", "account_id"], name: "index_accounts_tags_on_tag_id_and_account_id", unique: true
end
create_table "admin_action_logs", force: :cascade do |t|
t.bigint "account_id"
t.string "action", default: "", null: false
t.string "target_type"
t.bigint "target_id"
t.text "recorded_changes", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_admin_action_logs_on_account_id"
t.index ["target_type", "target_id"], name: "index_admin_action_logs_on_target_type_and_target_id"
end
create_table "announcement_mutes", force: :cascade do |t|
t.bigint "account_id"
t.bigint "announcement_id"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id", "announcement_id"], name: "index_announcement_mutes_on_account_id_and_announcement_id", unique: true
t.index ["announcement_id"], name: "index_announcement_mutes_on_announcement_id"
end
create_table "announcement_reactions", force: :cascade do |t|
t.bigint "account_id"
t.bigint "announcement_id"
t.string "name", default: "", null: false
t.bigint "custom_emoji_id"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id", "announcement_id", "name"], name: "index_announcement_reactions_on_account_id_and_announcement_id", unique: true
t.index ["announcement_id"], name: "index_announcement_reactions_on_announcement_id"
t.index ["custom_emoji_id"], name: "index_announcement_reactions_on_custom_emoji_id"
end
create_table "announcements", force: :cascade do |t|
t.text "text", default: "", null: false
t.boolean "published", default: false, null: false
t.boolean "all_day", default: false, null: false
t.datetime "scheduled_at"
t.datetime "starts_at"
t.datetime "ends_at"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.datetime "published_at"
t.bigint "status_ids", array: true
end
create_table "backups", force: :cascade do |t|
t.bigint "user_id"
t.string "dump_file_name"
t.string "dump_content_type"
t.datetime "dump_updated_at"
t.boolean "processed", default: false, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.bigint "dump_file_size"
end
create_table "blocks", force: :cascade do |t|
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.bigint "target_account_id", null: false
t.string "uri"
t.index ["account_id", "target_account_id"], name: "index_blocks_on_account_id_and_target_account_id", unique: true
t.index ["target_account_id"], name: "index_blocks_on_target_account_id"
end
create_table "bookmarks", force: :cascade do |t|
t.bigint "account_id", null: false
t.bigint "status_id", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id", "status_id"], name: "index_bookmarks_on_account_id_and_status_id", unique: true
t.index ["status_id"], name: "index_bookmarks_on_status_id"
end
create_table "conversation_mutes", force: :cascade do |t|
t.bigint "conversation_id", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.index ["account_id", "conversation_id"], name: "index_conversation_mutes_on_account_id_and_conversation_id", unique: true
end
create_table "conversations", force: :cascade do |t|
t.string "uri"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["uri"], name: "index_conversations_on_uri", unique: true
end
create_table "custom_emoji_categories", force: :cascade do |t|
t.string "name"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["name"], name: "index_custom_emoji_categories_on_name", unique: true
end
create_table "custom_emojis", force: :cascade do |t|
t.string "shortcode", default: "", null: false
t.string "domain"
t.string "image_file_name"
t.string "image_content_type"
t.integer "image_file_size"
t.datetime "image_updated_at"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.boolean "disabled", default: false, null: false
t.string "uri"
t.string "image_remote_url"
t.boolean "visible_in_picker", default: true, null: false
t.bigint "category_id"
t.integer "image_storage_schema_version"
t.index ["shortcode", "domain"], name: "index_custom_emojis_on_shortcode_and_domain", unique: true
end
create_table "custom_filters", force: :cascade do |t|
t.bigint "account_id"
t.datetime "expires_at"
t.text "phrase", default: "", null: false
t.string "context", default: [], null: false, array: true
t.boolean "irreversible", default: false, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.boolean "whole_word", default: true, null: false
t.index ["account_id"], name: "index_custom_filters_on_account_id"
end
2020-06-02 17:24:53 +00:00
create_table "devices", force: :cascade do |t|
t.bigint "access_token_id"
t.bigint "account_id"
t.string "device_id", default: "", null: false
t.string "name", default: "", null: false
t.text "fingerprint_key", default: "", null: false
t.text "identity_key", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["access_token_id"], name: "index_devices_on_access_token_id"
t.index ["account_id"], name: "index_devices_on_account_id"
end
2019-07-30 09:10:46 +00:00
create_table "domain_allows", force: :cascade do |t|
t.string "domain", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["domain"], name: "index_domain_allows_on_domain", unique: true
end
create_table "domain_blocks", force: :cascade do |t|
t.string "domain", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.integer "severity", default: 0
t.boolean "reject_media", default: false, null: false
t.boolean "reject_reports", default: false, null: false
t.text "private_comment"
t.text "public_comment"
t.index ["domain"], name: "index_domain_blocks_on_domain", unique: true
2016-10-09 12:48:43 +00:00
end
create_table "email_domain_blocks", force: :cascade do |t|
t.string "domain", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.bigint "parent_id"
t.index ["domain"], name: "index_email_domain_blocks_on_domain", unique: true
end
2020-06-02 17:24:53 +00:00
create_table "encrypted_messages", id: :bigint, default: -> { "timestamp_id('encrypted_messages'::text)" }, force: :cascade do |t|
t.bigint "device_id"
t.bigint "from_account_id"
t.string "from_device_id", default: "", null: false
t.integer "type", default: 0, null: false
t.text "body", default: "", null: false
t.text "digest", default: "", null: false
t.text "message_franking", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["device_id"], name: "index_encrypted_messages_on_device_id"
t.index ["from_account_id"], name: "index_encrypted_messages_on_from_account_id"
end
create_table "favourites", force: :cascade do |t|
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.bigint "status_id", null: false
t.index ["account_id", "id"], name: "index_favourites_on_account_id_and_id"
t.index ["account_id", "status_id"], name: "index_favourites_on_account_id_and_status_id", unique: true
t.index ["status_id"], name: "index_favourites_on_status_id"
end
create_table "featured_tags", force: :cascade do |t|
t.bigint "account_id"
t.bigint "tag_id"
t.bigint "statuses_count", default: 0, null: false
t.datetime "last_status_at"
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_featured_tags_on_account_id"
t.index ["tag_id"], name: "index_featured_tags_on_tag_id"
end
create_table "follow_requests", force: :cascade do |t|
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.bigint "target_account_id", null: false
Allow hiding of reblogs from followed users (#5762) * Allow hiding of reblogs from followed users This adds a new entry to the account menu to allow users to hide future reblogs from a user (and then if they've done that, to show future reblogs instead). This does not remove or add historical reblogs from/to the user's timeline; it only affects new statuses. The API for this operates by sending a "reblogs" key to the follow endpoint. If this is sent when starting a new follow, it will be respected from the beginning of the follow relationship (even if the follow request must be approved by the followee). If this is sent when a follow relationship already exists, it will simply update the existing follow relationship. As with the notification muting, this will now return an object ({reblogs: [true|false]}) or false for each follow relationship when requesting relationship information for an account. This should cause few issues due to an object being truthy in many languages, but some modifications may need to be made in pickier languages. Database changes: adds a show_reblogs column (default true, non-nullable) to the follows and follow_requests tables. Because these are non-nullable, we use the existing MigrationHelpers to perform this change without locking those tables, although the tables are likely to be small anyway. Tests included. See also <https://github.com/glitch-soc/mastodon/pull/212>. * Rubocop fixes * Code review changes * Test fixes This patchset closes #648 and resolves #3271. * Rubocop fix * Revert reblogs defaulting in argument, fix tests It turns out we needed this for the same reason we needed it in muting: if nil gets passed in somehow (most usually by an API client not passing any value), we need to detect and handle it. We could specify a default in the parameter and then also catch nil, but there's no great reason to duplicate the default value.
2017-11-28 14:00:35 +00:00
t.boolean "show_reblogs", default: true, null: false
t.string "uri"
t.index ["account_id", "target_account_id"], name: "index_follow_requests_on_account_id_and_target_account_id", unique: true
end
create_table "follows", force: :cascade do |t|
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.bigint "target_account_id", null: false
Allow hiding of reblogs from followed users (#5762) * Allow hiding of reblogs from followed users This adds a new entry to the account menu to allow users to hide future reblogs from a user (and then if they've done that, to show future reblogs instead). This does not remove or add historical reblogs from/to the user's timeline; it only affects new statuses. The API for this operates by sending a "reblogs" key to the follow endpoint. If this is sent when starting a new follow, it will be respected from the beginning of the follow relationship (even if the follow request must be approved by the followee). If this is sent when a follow relationship already exists, it will simply update the existing follow relationship. As with the notification muting, this will now return an object ({reblogs: [true|false]}) or false for each follow relationship when requesting relationship information for an account. This should cause few issues due to an object being truthy in many languages, but some modifications may need to be made in pickier languages. Database changes: adds a show_reblogs column (default true, non-nullable) to the follows and follow_requests tables. Because these are non-nullable, we use the existing MigrationHelpers to perform this change without locking those tables, although the tables are likely to be small anyway. Tests included. See also <https://github.com/glitch-soc/mastodon/pull/212>. * Rubocop fixes * Code review changes * Test fixes This patchset closes #648 and resolves #3271. * Rubocop fix * Revert reblogs defaulting in argument, fix tests It turns out we needed this for the same reason we needed it in muting: if nil gets passed in somehow (most usually by an API client not passing any value), we need to detect and handle it. We could specify a default in the parameter and then also catch nil, but there's no great reason to duplicate the default value.
2017-11-28 14:00:35 +00:00
t.boolean "show_reblogs", default: true, null: false
t.string "uri"
t.index ["account_id", "target_account_id"], name: "index_follows_on_account_id_and_target_account_id", unique: true
t.index ["target_account_id"], name: "index_follows_on_target_account_id"
2016-02-22 15:00:20 +00:00
end
create_table "identities", force: :cascade do |t|
t.string "provider", default: "", null: false
t.string "uid", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.bigint "user_id"
t.index ["user_id"], name: "index_identities_on_user_id"
end
create_table "imports", force: :cascade do |t|
t.integer "type", null: false
t.boolean "approved", default: false, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.string "data_file_name"
t.string "data_content_type"
t.integer "data_file_size"
t.datetime "data_updated_at"
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.boolean "overwrite", default: false, null: false
end
create_table "invites", force: :cascade do |t|
t.bigint "user_id", null: false
t.string "code", default: "", null: false
t.datetime "expires_at"
t.integer "max_uses"
t.integer "uses", default: 0, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.boolean "autofollow", default: false, null: false
2019-08-19 09:40:42 +00:00
t.text "comment"
t.index ["code"], name: "index_invites_on_code", unique: true
t.index ["user_id"], name: "index_invites_on_user_id"
end
create_table "list_accounts", force: :cascade do |t|
t.bigint "list_id", null: false
t.bigint "account_id", null: false
t.bigint "follow_id"
t.index ["account_id", "list_id"], name: "index_list_accounts_on_account_id_and_list_id", unique: true
t.index ["follow_id"], name: "index_list_accounts_on_follow_id"
t.index ["list_id", "account_id"], name: "index_list_accounts_on_list_id_and_account_id"
end
create_table "lists", force: :cascade do |t|
t.bigint "account_id", null: false
t.string "title", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["account_id"], name: "index_lists_on_account_id"
end
create_table "markers", force: :cascade do |t|
t.bigint "user_id"
t.string "timeline", default: "", null: false
t.bigint "last_read_id", default: 0, null: false
t.integer "lock_version", default: 0, null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.index ["user_id", "timeline"], name: "index_markers_on_user_id_and_timeline", unique: true
end
create_table "media_attachments", id: :bigint, default: -> { "timestamp_id('media_attachments'::text)" }, force: :cascade do |t|
t.bigint "status_id"
t.string "file_file_name"
t.string "file_content_type"
t.integer "file_file_size"
2016-09-05 15:46:36 +00:00
t.datetime "file_updated_at"
t.string "remote_url", default: "", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.string "shortcode"
t.integer "type", default: 0, null: false
t.json "file_meta"
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id"
t.text "description"
t.bigint "scheduled_status_id"
t.string "blurhash"
t.integer "processing"
t.integer "file_storage_schema_version"
t.string "thumbnail_file_name"
t.string "thumbnail_content_type"
t.integer "thumbnail_file_size"
t.datetime "thumbnail_updated_at"
t.string "thumbnail_remote_url"
t.index ["account_id"], name: "index_media_attachments_on_account_id"
t.index ["scheduled_status_id"], name: "index_media_attachments_on_scheduled_status_id"
t.index ["shortcode"], name: "index_media_attachments_on_shortcode", unique: true
t.index ["status_id"], name: "index_media_attachments_on_status_id"
2016-09-05 15:46:36 +00:00
end
create_table "mentions", force: :cascade do |t|
t.bigint "status_id"
2016-02-24 23:17:01 +00:00
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id"
t.boolean "silent", default: false, null: false
t.index ["account_id", "status_id"], name: "index_mentions_on_account_id_and_status_id", unique: true
t.index ["status_id"], name: "index_mentions_on_status_id"
2016-02-24 23:17:01 +00:00
end
create_table "mutes", force: :cascade do |t|
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.boolean "hide_notifications", default: true, null: false
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "account_id", null: false
t.bigint "target_account_id", null: false
t.index ["account_id", "target_account_id"], name: "index_mutes_on_account_id_and_target_account_id", unique: true
t.index ["target_account_id"], name: "index_mutes_on_target_account_id"
end
create_table "notifications", force: :cascade do |t|
t.bigint "activity_id", null: false
t.string "activity_type", null: false
t.datetime "created_at", null: false
t.datetime "updated_at", null: false
t.bigint "account_id", null: false
t.bigint "from_account_id", null: false
t.index ["account_id", "activity_id", "activity_type"], name: "account_activity", unique: true
t.index ["account_id", "id"], name: "index_notifications_on_account_id_and_id", order: { id: :desc }
t.index ["activity_id", "activity_type"], name: "index_notifications_on_activity_id_and_activity_type"
t.index ["from_account_id"], name: "index_notifications_on_from_account_id"
end
create_table "oauth_access_grants", force: :cascade do |t|
t.string "token", null: false
t.integer "expires_in", null: false
t.text "redirect_uri", null: false
t.datetime "created_at", null: false
t.datetime "revoked_at"
t.string "scopes"
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00:00
t.bigint "application_id", null: false
t.bigint "resource_owner_id", null: false
t.index ["resource_owner_id"], name: "index_oauth_access_grants_on_resource_owner_id"
t.index ["token"], name: "index_oauth_access_grants_on_token", unique: true
end
create_table "oauth_access_tokens", force: :cascade do |t|
t.string "token", null: false
t.string "refresh_token"
t.integer "expires_in"
t.datetime "revoked_at"
t.datetime "created_at", null: false
t.string "scopes"
Make IdsToBigints (mostly!) non-blocking (#5088) * Make IdsToBigints (mostly!) non-blocking This pulls in GitLab's MigrationHelpers, which include code to make column changes in ways that Postgres can do without locking. In general, this involves creating a new column, adding an index and any foreign keys as appropriate, adding a trigger to keep it populated alongside the old column, and then progressively copying data over to the new column, before removing the old column and replacing it with the new one. A few changes to GitLab's MigrationHelpers were necessary: * Some changes were made to remove dependencies on other GitLab code. * We explicitly wait for index creation before forging ahead on column replacements. * We use different temporary column names, to avoid running into index name length limits. * We rename the generated indices back to what they "should" be after replacing columns. * We rename the generated foreign keys to use the new column names when we had to create them. (This allows the migration to be rolled back without incident.) # Big Scary Warning There are two things here that may trip up large instances: 1. The change for tables' "id" columns is not concurrent. In particular, the stream_entries table may be big, and does not concurrently migrate its id column. (On the other hand, x_id type columns are all concurrent.) 2. This migration will take a long time to run, *but it should not lock tables during that time* (with the exception of the "id" columns as described above). That means this should probably be run in `screen` or some other session that can be run for a long time. Notably, the migration will take *longer* than it would without these changes, but the website will still be responsive during that time. These changes were tested on a relatively large statuses table (256k entries), and the service remained responsive during the migration. Migrations both forward and backward were tested. * Rubocop fixes * MigrationHelpers: Support ID columns in some cases This doesn't work in cases where the ID column is referred to as a foreign key by another table. * MigrationHelpers: support foreign keys for ID cols Note that this does not yet support foreign keys on non-primary-key columns, but Mastodon also doesn't yet have any that we've needed to migrate. This means we can perform fully "concurrent" migrations to change ID column types, and the IdsToBigints migration can happen with effectively no downtime. (A few operations require a transaction, such as renaming columns or deleting them, but these transactions should not block for noticeable amounts of time.) The algorithm for generating foreign key names has changed with this, and therefore all of those changed in schema.rb. * Provide status, allow for interruptions The MigrationHelpers now allow restarting the rename of a column if it was interrupted, by removing the old "new column" and re-starting the process. Along with this, they now provide status updates on the changes which are happening, as well as indications about when the changes can be safely interrupted (when there are at least 10 seconds estimated to be left before copying data is complete). The IdsToBigints migration now also sorts the columns it migrates by size, starting with the largest tables. This should provide administrators a worst-case scenario estimate for the length of migrations: each successive change will get faster, giving admins a chance to abort early on if they need to run the migration later. The idea is that this does not force them to try to time interruptions between smaller migrations. * Fix column sorting in IdsToBigints Not a significant change, but it impacts the order of columns in the database and db/schema.rb. * Actually pause before IdsToBigints
2017-10-02 19:28:59 +00