Conflicts:
- .eslintrc.yml
Removed, as upstream removed it.
- app/controllers/admin/statuses_controller.rb
Minor code cleanup when porting one of our features.
- app/models/account.rb
Note length validation has changed upstream.
We now use upstream's validation (dropped legacy glitch-soc
account metadata stuff) but with configurable limit.
- app/services/post_status_service.rb
Upstream has added support for scheduled toots, refactoring
the code a bit. Adapted our changes to this refactoring.
- app/views/stream_entries/_detailed_status.html.haml
Not a real conflict, changes too close.
- app/views/stream_entries/_simple_status.html.haml
Not a real conflict, changes too close.
I also added "public" here, as I can't think of a good reason not to add it. Perhaps it has some marginal benefit in that ISPs (or other proxies) can cache it for all users. The assets are certainly publicly available and the same for all users.
* Add REST API for creating an account
The method is available to apps with a token obtained via the client
credentials grant. It creates a user and account records, as well as
an access token for the app that initiated the request. The user is
unconfirmed, and an e-mail is sent as usual.
The method returns the access token, which the app should save for
later. The REST API is not available to users with unconfirmed
accounts, so the app must be smart to wait for the user to click a
link in their e-mail inbox.
The method is rate-limited by IP to 5 requests per 30 minutes.
* Redirect users back to app from confirmation if they were created with an app
* Add tests
* Return 403 on the method if registrations are not open
* Require agreement param to be true in the API when creating an account
Conflicts:
- app/controllers/admin/base_controller.rb
- app/controllers/filters_controller.rb
- app/controllers/invites_controller.rb
- app/controllers/settings/deletes_controller.rb
- app/controllers/settings/exports_controller.rb
- app/controllers/settings/follower_domains_controller.rb
- app/controllers/settings/migrations_controller.rb
- app/controllers/settings/notifications_controller.rb
- app/controllers/settings/preferences_controller.rb
- app/controllers/settings/two_factor_authentication/recovery_codes_controller.rb
- app/javascript/packs/public.js
- app/views/settings/profiles/show.html.haml
Conflicts were mostly due to the addition of body classes to the settings page,
this was caused by rejecting upstream changes for most of those files and
modifying Settings::BaseController instead.
Another cause of conflicts was the deletion of client-side checking of
display name / bio length, this was modified in app/javascript/core/settings.js
instead.
Right now, this includes three endpoints: host-meta, webfinger, and change-password.
host-meta and webfinger are publicly available and do not use any authentication. Nothing bad can be done by accessing them in a user's browser.
change-password being CORS-enabled will only reveal the URL it redirects to (which is /auth/edit) but not anything about the actual /auth/edit page, because it does not have CORS enabled.
The documentation for hosting an instance on a different domain should also be updated to point out that Access-Control-Allow-Origin: * should be set at a minimum for the /.well-known/host-meta redirect to allow browser-based non-proxied instance discovery.
Conflicts:
- .github/ISSUE_TEMPLATE/bug_report.md
Took our version.
- CONTRIBUTING.md
Updated the embedded copy of upstream's version.
- README.md
Took our version.
- app/policies/status_policy.rb
Not a real conflict, took code from both.
- app/views/layouts/embedded.html.haml
Added upstream's changes (dns-prefetch) and fixed
`%body.embed`
- app/views/settings/preferences/show.html.haml
Reverted some of upstream changes, as we have a
page dedicated for flavours and skins.
- config/initializers/content_security_policy.rb
Kept our version of the CSP.
- config/initializers/doorkeeper.rb
Not a real conflict, took code from both.
Conflicts:
db/migrate/20170716191202_add_hide_notifications_to_mute.rb
spec/controllers/application_controller_spec.rb
Took our version, upstream changes were only minor style linting.
* Verify link ownership with rel="me"
* Add explanation about verification to UI
* Perform link verifications
* Add click-to-copy widget for verification HTML
* Redesign edit profile page
* Redesign forms
* Improve responsive design of settings pages
* Restore landing page sign-up form
* Fix typo
* Support <link> tags, add spec
* Fix links not being verified on first discovery and passive updates
CSFR-prevention is already implemented but adding this doesn't hurt.
A brief introduction to Same-Site cookies (and the difference between strict and
lax) can be found at
https://blog.mozilla.org/security/2018/04/24/same-site-cookies-in-firefox-60/
TLDR: We use lax since we want the cookies to be sent when the user navigates
safely from an external site.
Conflicts:
app/views/layouts/application.html.haml
Edited:
app/helpers/application_helper.rb
app/views/admin/domain_blocks/new.html.haml
Conflict wasn't really one, just two changes too close to one another.
Edition was to adapt the class names for themes to class names for
skins and flavours.
Also edited app/views/admin/domain_blocks/new.html.haml to strip the
duplicate admin pack inclusion thing.
* Fix uncaching worker
* Revert to using Paperclip's filesystem backend instead of fog-local
fog-local has lots of concurrency issues, causing failure to delete files,
dangling file records, and spurious errors UncacheMediaWorker
Conflicts:
app/models/status.rb
db/migrate/20180528141303_fix_accounts_unique_index.rb
db/schema.rb
Resolved by taking upstream changes (no real conflicts, just glitch-soc
specific code too close to actual changes).
Adopted from GitLab CE. Generate new migration with:
rails g post_deployment_migration name_of_migration_here
By default they are run together with db:migrate. To not run them,
the env variable SKIP_POST_DEPLOYMENT_MIGRATIONS must be set
Code by Yorick Peterse <yorickpeterse@gmail.com>, see also:
83c8241160
Adopted from GitLab CE. Generate new migration with:
rails g post_deployment_migration name_of_migration_here
By default they are run together with db:migrate. To not run them,
the env variable SKIP_POST_DEPLOYMENT_MIGRATIONS must be set
Code by Yorick Peterse <yorickpeterse@gmail.com>, see also:
83c8241160
Conflicts:
README.md
app/controllers/statuses_controller.rb
app/lib/feed_manager.rb
config/navigation.rb
spec/lib/feed_manager_spec.rb
Conflicts were resolved by taking both versions for each change.
This means the two filter systems (glitch-soc's keyword mutes and tootsuite's
custom filters) are in place, which will be changed in a follow-up commit.
* Add more granular OAuth scopes
* Add human-readable descriptions of the new scopes
* Ensure new scopes look good on the app UI
* Add tests
* Group scopes in screen and color-code dangerous ones
* Fix wrong extra scope
If Mastodon accesses to the hidden service via transparent proxy, it's needed to avoid checking whether it's a private address, since `.onion` is resolved to a private address.
I was previously using the `HIDDEN_SERVICE_VIA_TRANSPARENT_PROXY` to provide that function. However, I realized that using `HIDDEN_SERVICE_VIA_TRANSPARENT_PROXY` is redundant, since this specification is always used with `ALLOW_ACCESS_TO_HIDDEN_SERVICE`. Therefore, I decided to integrate the setting of `HIDDEN_SERVICE_VIA_TRANSPARENT_PROXY` into` ALLOW_ACCESS_TO_HIDDEN_SERVICE`.
Conflicts:
app/javascript/mastodon/initial_state.js
db/schema.rb
Upstream added a new field to initial_state.
Not too sure about what happened with db/schema.rb though…
- POST /api/v1/push/subscription
- PUT /api/v1/push/subscription
- DELETE /api/v1/push/subscription
- New OAuth scope: "push" (required for the above methods)
The previous rate limit allowed to post media so fast that it is possible
to fill up the disk space even before an administrator notices. The new
rate limit is configured so that it takes 24 hours to eat 10 gigabytes:
10 * 1024 / 8 / (24 * 60 / 30) = 27 (which rounded to 30)
The period is set long so that it does not prevent from attaching several
media to one post, which would happen in a short period. For example,
if the period is 5 minutes, the rate limit would be:
10 * 1024 / 8 / (24 * 60 / 5) = 4
This long period allows to lift the limit up.
* No need to re-require sidekiq plugins, they are required via Gemfile
* Add derailed_benchmarks tool, no need to require TTY gems in Gemfile
* Replace ruby-oembed with FetchOEmbedService
Reduce startup by 45382 allocated objects
* Remove preloaded JSON-LD in favour of caching HTTP responses
Reduce boot RAM by about 6 MiB
* Fix tests
* Fix test suite by stubbing out JSON-LD contexts
* Add support for HTTP client proxy
* Add access control for darknet
Supress error when access to darknet via transparent proxy
* Fix the codes pointed out
* Lint
* Fix an omission + lint
* any? -> include?
* Change detection method to regexp to avoid test fail
Conflicts:
app/serializers/initial_state_serializer.rb
The glitch flavour isn't yet pulling custom emoji data on its own (see
https://github.com/tootsuite/mastodon/pull/7047). Once that gets into
the glitch flavour, we can eliminate the custom_emojis load.
* Revert "Bump version to 2.3.2rc1"
This reverts commit cdf8b92fea.
* Revert "Downgrade Dockerfile to Ruby 2.4.3 on Alpine 3.6 (#6806)"
This reverts commit 0074cad44f.
* Revert "Handle Mastodon::HostValidationError when pulling remoteable assets (#6782)"
This reverts commit 4a0a19fe54.
* Revert "Correct the reference to user's password in mastodon:add_user task (#6800)"
This reverts commit 338bff8b93.
* Revert "Upgrade Paperclip to version 6.0.0 (#6754)"
This reverts commit b88fcd53f7.
In cases where a URL has a trailing hyphen the FetchLinkCardService incorrectly removes the hyphen when it is parsed
The hyphen is not a reserved character in the URI spec https://tools.ietf.org/html/rfc3986#section-2.2
* Add full-text search for authorized statuses
- Search API will return statuses that match the query
- Only for logged in users
- Only if you are author of the status,
- Or you were mentioned in it
- Or you favourited or reblogged it
- Configuration over `ES_ENABLED`, `ES_HOST`, `ES_PORT`, `ES_PREFIX`
- Run `rails chewy:deploy` to create & populate index
Fix#5880Fix#4293Fix#1152
* Add commented out docker-compose configuration for ES container
* Optimize index import, filter search results
* Add basic normalization to the index
* Add better stemming and normalization to the index
* Skip webfinger request if search query includes both @ and a space
* Fix code style
* Visually separate search result sections
* Fix code style issues
CSRF token checking was enabled for API controllers in #6223,
producing "Can't verify CSRF token authenticity" log spam. This
disables logging of failed CSRF checks.
This also changes the protection strategy for
PushSubscriptionsController to use exceptions, making it consistent
with other controllers that use sessions.
Previously each protected path had a separate rate limit. Now they're all in the same bucket, so people are more likely to hit one with register->login. Increasing to 25 per 5 minutes should be fine.
* Add confirmation step for email changes
This adds a confirmation step for email changes of existing users.
Like the initial account confirmation, a confirmation link is sent
to the new address.
Additionally, a notification is sent to the existing address when
the change is initiated. This message includes instruction to reset
the password immediately or to contact the instance admin if the
change was not initiated by the account owner.
Fixes#3871
* Add review fixes
Call to warden.authenticate! in resource_owner_from_credentials would
make the request redirect to sign-in path, which is a bad response for
apps. Now bad credentials just return nil, which leads to HTTP 401
from Doorkeeper. Also, accounts with enabled 2FA cannot be logged into
this way.
* Revert "Enable UniqueRetryJobMiddleware even when called from sidekiq worker (#4836)"
This reverts commit 6859d4c028.
* Revert "Do not execute the job with the same arguments as the retry job (#4814)"
This reverts commit be7ffa2d75.
Keystone V2 is deprecated in favour of V3. This adds the necessary
connection parameters for establishing a V3 connection. Connections
to V2 endpoints are still possible and the configuration should
remain compatible.
This also introduces a SWIFT_REGION variable for multi-region
OpenStack environments and a SWIFT_CACHE_TTL that controls how long
tokens and other meta-data is cached for. Caching tokens avoids
rate-limiting errors that would result in media uploads becoming
unavailable during high load or when using tasks like
media:remove_remote. fog-openstack only supports token caching for
V3 endpoints, so a recommendation for using V3 was added.
* Add handling of Linked Data Signatures in payloads
* Add a way to sign JSON, fix canonicalization of signature options
* Fix signatureValue encoding, send out signed JSON when distributing
* Add missing security context
* Add code for creating/managing apps to settings section
* Add specs for app changes
* Fix controller spec
* Fix view file I pasted over by mistake
* Add locale strings. Add 'my apps' to nav
* Add Client ID/Secret to App page. Add some visual separation
* Fix rubocop warnings
* Fix embarrassing typo
I lost an `end` statement while fixing a merge conflict.
* Add code for creating/managing apps to settings section
- Add specs for app changes
- Add locale strings. Add 'my apps' to nav
- Add Client ID/Secret to App page. Add some visual separation
- Fix some bugs/warnings
* Update to match code standards
* Trigger notification
* Add warning about not sharing API secrets
* Tweak spec a bit
* Cleanup fixture creation by using let!
* Remove unused key
* Add foreign key for application<->user
Moritz Heiber