smol/po/zh_TW.po

# Traditional Chinese Messages for the nano editor
# Copyright (C) 2004, 05 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2004, 05
#
msgid ""
msgstr ""
"Project-Id-Version: nano 1.3.7\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2005-04-12 20:54-0400\n"
"PO-Revision-Date: 2005-04-19 14:25+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: src/files.c:309
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式)"

#: src/files.c:314
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式)"

#: src/files.c:319
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式)"

#: src/files.c:324
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已讀取 %lu 列"

#: src/files.c:347
msgid "New File"
msgstr "新檔案"

#: src/files.c:350
#, c-format
msgid "\"%s\" not found"
msgstr "找不到 \"%s\""

#: src/files.c:355
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一個目錄"

#: src/files.c:356
#, c-format
msgid "File \"%s\" is a device file"
msgstr "\"%s\" 是一個裝置檔案"

#: src/files.c:359 src/files.c:367 src/files.c:1403 src/files.c:1469
#: src/files.c:1526 src/files.c:1625 src/files.c:2564 src/files.c:2580
#: src/files.c:2639 src/files.c:2848 src/rcfile.c:717
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"

#: src/files.c:371
msgid "Reading File"
msgstr "正在讀取檔案"

#: src/files.c:449
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "無法插入 %s 外部的檔案"

#: src/files.c:523
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新緩衝區中執行的命令 [從 %s] "

#: src/files.c:526
#, c-format
msgid "Command to execute [from %s] "
msgstr "執行的命令 [從 %s] "

#: src/files.c:531
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "所要插入新緩衝區的檔案 [從 %s] "

#: src/files.c:534
#, c-format
msgid "File to insert [from %s] "
msgstr "所要插入的檔案 [從 %s] "

#: src/files.c:561 src/files.c:1791 src/files.c:2613 src/nano.c:3361
#: src/search.c:214 src/search.c:938 src/search.c:985
msgid "Cancelled"
msgstr "已取消"

#: src/files.c:697
msgid "Key illegal in non-multibuffer mode"
msgstr "非多重緩衝區模式中此按鍵無效"

#: src/files.c:916
msgid "No more open file buffers"
msgstr "無多餘檔案緩衝區可開啟"

#: src/files.c:932
#, c-format
msgid "Switched to %s"
msgstr "切換至 %s"

#: src/files.c:933 src/global.c:258 src/winio.c:2782
msgid "New Buffer"
msgstr "新緩衝區"

#: src/files.c:1358
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"

#: src/files.c:1373
msgid "Cannot prepend or append to a symlink with --nofollow set"
msgstr "--nofollow 設定下，無法前引或附加至符號連結檔"

#: src/files.c:1447 src/files.c:1472 src/files.c:1485 src/files.c:1513
#: src/files.c:1534 src/files.c:1552 src/files.c:1561 src/files.c:1582
#: src/files.c:1590 src/files.c:1600 src/files.c:1632 src/files.c:1637
#: src/files.c:2912 src/files.c:2921
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/files.c:1656
#, c-format
msgid "Wrote %u line"
msgid_plural "Wrote %u lines"
msgstr[0] "已寫入 %u 列"

#: src/files.c:1750
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:1752
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:1757
msgid " [Backup]"
msgstr " [備份]"

#: src/files.c:1764
msgid "Prepend Selection to File"
msgstr "前引選擇部份於檔案"

#: src/files.c:1766
msgid "Append Selection to File"
msgstr "附加選擇部份至檔案"

#: src/files.c:1768
msgid "Write Selection to File"
msgstr "寫入選擇部份至檔案"

#: src/files.c:1772
msgid "File Name to Prepend to"
msgstr "要前引於的檔案名稱"

#: src/files.c:1774
msgid "File Name to Append to"
msgstr "要附加至的檔案名稱"

#: src/files.c:1776
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"

#: src/files.c:1850
msgid "File exists, OVERWRITE ? "
msgstr "檔案已存在，要覆寫嗎？"

#: src/files.c:1864
msgid "Save file under DIFFERENT NAME ? "
msgstr "以不同的名稱存檔？"

#: src/files.c:2257
msgid "(more)"
msgstr "(更多)"

#: src/files.c:2545
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"

#: src/files.c:2556 src/files.c:2628
#, c-format
msgid "Can't go outside of %s in restricted mode"
msgstr "在限制模式中無法至 %s 外部"

#: src/files.c:2607
msgid "Go To Directory"
msgstr "跳至目錄"

#: src/files.c:2704 src/files.c:2709
msgid "(dir)"
msgstr "(目錄)"

#: src/files.c:2851 src/rcfile.c:674
#, c-format
msgid ""
"\n"
"Press Return to continue starting nano\n"
msgstr ""
"\n"
"按下輸入鍵繼續啟動 nano\n"

#: src/global.c:233
msgid "Get Help"
msgstr "求助"

#: src/global.c:234
msgid "Exit"
msgstr "離開"

#: src/global.c:235
msgid "Prev Page"
msgstr "上頁"

#: src/global.c:236
msgid "Next Page"
msgstr "下頁"

#: src/global.c:237
msgid "Replace"
msgstr "置換"

#: src/global.c:238
msgid "Go To Line"
msgstr "跳列"

#: src/global.c:239 src/winio.c:3684
msgid "Cancel"
msgstr "取消"

#: src/global.c:240
msgid "First Line"
msgstr "首列"

#: src/global.c:241
msgid "Last Line"
msgstr "尾列"

#: src/global.c:243
msgid "CutTillEnd"
msgstr "刪至末端"

#: src/global.c:246
msgid "Beg of Par"
msgstr "段落開頭"

#: src/global.c:247
msgid "End of Par"
msgstr "段落結尾"

#: src/global.c:248
msgid "FullJstify"
msgstr "全部對齊"

#: src/global.c:251
msgid "Case Sens"
msgstr "依大小寫"

#: src/global.c:252
msgid "Direction"
msgstr "搜尋方向"

#: src/global.c:254
msgid "Regexp"
msgstr "正規表示"

#: src/global.c:256
msgid "History"
msgstr "歷史記錄"

#: src/global.c:262
msgid "To Files"
msgstr "檔案選單"

#: src/global.c:266
msgid "Invoke the help menu"
msgstr "呼叫輔助說明"

#: src/global.c:269
msgid "Close currently loaded file/Exit from nano"
msgstr "關閉目前已載入檔案並離開 nano"

#: src/global.c:271
msgid "Exit from nano"
msgstr "離開 nano"

#: src/global.c:274
msgid "Write the current file to disk"
msgstr "寫入目前檔案至磁碟"

#: src/global.c:275
msgid "Justify the current paragraph"
msgstr "對齊目前段落"

#: src/global.c:277
msgid "Insert another file into the current one"
msgstr "插入它檔至目前檔案"

#: src/global.c:278
msgid "Search for text within the editor"
msgstr "搜尋編輯器中文字"

#: src/global.c:279
msgid "Move to the previous screen"
msgstr "跳至前一畫面"

#: src/global.c:280
msgid "Move to the next screen"
msgstr "跳至後一畫面"

#: src/global.c:282
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:284
msgid "Uncut from the cutbuffer into the current line"
msgstr "從剪貼簿還原至目前這列"

#: src/global.c:285
msgid "Show the position of the cursor"
msgstr "顯示游標位置"

#: src/global.c:286
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:287
msgid "Go to a specific line number"
msgstr "跳至指定列號"

#: src/global.c:288
msgid "Replace text within the editor"
msgstr "置換編輯器中文字"

#: src/global.c:290
msgid "Mark text at the cursor position"
msgstr "標記游標所在文字"

#: src/global.c:291
msgid "Repeat last search"
msgstr "重覆上次搜尋"

#: src/global.c:293
msgid "Move to the previous line"
msgstr "跳至前一列"

#: src/global.c:294
msgid "Move to the next line"
msgstr "跳至後一列"

#: src/global.c:295
msgid "Move forward one character"
msgstr "向前跳一字元"

#: src/global.c:296
msgid "Move back one character"
msgstr "向後跳一字元"

#: src/global.c:297
msgid "Move to the beginning of the current line"
msgstr "跳至目前列首"

#: src/global.c:298
msgid "Move to the end of the current line"
msgstr "跳至目前列尾"

#: src/global.c:299
msgid "Refresh (redraw) the current screen"
msgstr "重新顯示目前畫面"

#: src/global.c:300
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"

#: src/global.c:302
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"

#: src/global.c:304
msgid "Insert a tab character at the cursor position"
msgstr "插入跳格字元於游標位置"

#: src/global.c:306
msgid "Insert a carriage return at the cursor position"
msgstr "插入換列字元於游標位置"

#: src/global.c:308
msgid "Move forward one word"
msgstr "向前跳一個字"

#: src/global.c:309
msgid "Move backward one word"
msgstr "向後跳一個字"

#: src/global.c:313
msgid "Go to the beginning of the current paragraph"
msgstr "跳至目前段落開頭"

#: src/global.c:315
msgid "Go to the end of the current paragraph"
msgstr "跳至目前段落結尾"

#: src/global.c:318
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"

#: src/global.c:319
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"

#: src/global.c:321
msgid "Insert character(s) verbatim"
msgstr "插入字元原形"

#: src/global.c:324
msgid "Cut from the cursor position to the end of the file"
msgstr "從游標位置剪下至檔案結尾"

#: src/global.c:327
msgid "Justify the entire file"
msgstr "對齊整個檔案"

#: src/global.c:330
msgid "Find other bracket"
msgstr "尋找其他括號"

#: src/global.c:332
msgid "Cancel the current function"
msgstr "取消目前功能"

#: src/global.c:333
msgid "Go to the first line of the file"
msgstr "跳至檔案第一列"

#: src/global.c:334
msgid "Go to the last line of the file"
msgstr "跳至檔案最後一列"

#: src/global.c:337
msgid "Make the current search/replace case (in)sensitive"
msgstr "使目前搜尋與置換(不)區分大小寫"

#: src/global.c:339
msgid "Make the current search/replace go backwards"
msgstr "使目前搜尋與置換向後進行"

#: src/global.c:341
msgid "Use regular expressions"
msgstr "使用正規表示式"

#: src/global.c:344
msgid "Edit the previous search/replace strings"
msgstr "編輯前次搜尋/置換字串"

#: src/global.c:348
msgid "Go to file browser"
msgstr "呼叫檔案選單"

#: src/global.c:351
msgid "Write file out in DOS format"
msgstr "以 DOS 格式寫入檔案"

#: src/global.c:352
msgid "Write file out in Mac format"
msgstr "以 Mac 格式寫入檔案"

#: src/global.c:354
msgid "Append to the current file"
msgstr "附加至目前檔案"

#: src/global.c:355
msgid "Prepend to the current file"
msgstr "前引於目前檔案"

#: src/global.c:357
msgid "Back up original file when saving"
msgstr "存檔時備份原始檔案"

#: src/global.c:358
msgid "Execute external command"
msgstr "執行外部命令"

#: src/global.c:361
msgid "Insert into new buffer"
msgstr "插入新的緩衝區"

#: src/global.c:364
msgid "Exit from the file browser"
msgstr "從檔案選單離開"

#: src/global.c:365
msgid "Go to directory"
msgstr "跳至目錄"

#: src/global.c:395
msgid "Close"
msgstr "關閉"

#: src/global.c:401
msgid "WriteOut"
msgstr "寫入"

#: src/global.c:406
msgid "Justify"
msgstr "對齊"

#: src/global.c:422
msgid "Read File"
msgstr "讀檔"

#: src/global.c:434
msgid "Where Is"
msgstr "搜尋"

#: src/global.c:449
msgid "Cut Text"
msgstr "剪下文字"

#: src/global.c:455
msgid "UnJustify"
msgstr "還原對齊"

#: src/global.c:460
msgid "UnCut Txt"
msgstr "還原剪下"

#: src/global.c:465
msgid "Cur Pos"
msgstr "游標位置"

#: src/global.c:473
msgid "To Spell"
msgstr "拼字檢查"

#: src/global.c:490
msgid "Mark Text"
msgstr "標記文字"

#: src/global.c:494
msgid "Where Is Next"
msgstr "何處是下一個"

#: src/global.c:499 src/global.c:806
msgid "Prev Line"
msgstr "上列"

#: src/global.c:503 src/global.c:810
msgid "Next Line"
msgstr "下列"

#: src/global.c:507
msgid "Forward"
msgstr "向前"

#: src/global.c:511
msgid "Back"
msgstr "向後"

#: src/global.c:515
msgid "Home"
msgstr "頂端"

#: src/global.c:519
msgid "End"
msgstr "尾端"

#: src/global.c:523 src/global.c:814 src/global.c:1005
msgid "Refresh"
msgstr "重新顯示"

#: src/global.c:527
msgid "Delete"
msgstr "刪除鍵"

#: src/global.c:531
msgid "Backspace"
msgstr "退格鍵"

#: src/global.c:535
msgid "Tab"
msgstr "跳格鍵"

#: src/global.c:539
msgid "Enter"
msgstr "輸入鍵"

#: src/global.c:544
msgid "Next Word"
msgstr "後一個字"

#: src/global.c:548
msgid "Prev Word"
msgstr "前一個字"

#: src/global.c:566
msgid "Previous File"
msgstr "上個檔案"

#: src/global.c:570
msgid "Next File"
msgstr "下個檔案"

#: src/global.c:575
msgid "Verbatim Input"
msgstr "原形輸入"

#: src/global.c:594
msgid "Find Other Bracket"
msgstr "尋找其他括號"

#: src/global.c:709
msgid "No Replace"
msgstr "不置換"

#: src/global.c:792
msgid "Go To Text"
msgstr "跳至文字"

#: src/global.c:858
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:864
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:871
msgid "Append"
msgstr "附加"

#: src/global.c:877
msgid "Prepend"
msgstr "前引"

#: src/global.c:884
msgid "Backup File"
msgstr "備份檔案"

#: src/global.c:920
msgid "Execute Command"
msgstr "執行命令"

#: src/global.c:969
msgid "Insert File"
msgstr "插入檔案"

#: src/global.c:1010
msgid "Go To Dir"
msgstr "跳至目錄"

#: src/global.c:1079
msgid "Help mode"
msgstr "輔助模式"

#: src/global.c:1085
msgid "Multiple file buffers"
msgstr "多重檔案緩衝區"

#: src/global.c:1087
msgid "Constant cursor position"
msgstr "持續游標位置"

#: src/global.c:1089
msgid "Auto indent"
msgstr "自動縮排"

#: src/global.c:1092
msgid "Auto line wrap"
msgstr "自動換列"

#: src/global.c:1094
msgid "Cut to end"
msgstr "剪下至列尾"

#: src/global.c:1098
msgid "Suspend"
msgstr "暫停"

#: src/global.c:1100
msgid "Mouse support"
msgstr "滑鼠支援"

#: src/global.c:1106
msgid "No conversion from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"

#: src/global.c:1110
msgid "Backup files"
msgstr "備份檔案"

#: src/global.c:1112 src/nano.c:1040
msgid "Smooth scrolling"
msgstr "平滑式捲動畫面"

#: src/global.c:1114
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"

#: src/global.c:1117
msgid "Color syntax highlighting"
msgstr "語法色彩標示"

#: src/global.c:1121
msgid "Whitespace display"
msgstr "顯示空格"

#: src/global.c:1124
msgid "Use of more space for editing"
msgstr "編輯時使用更多空間"

#: src/nano.c:84
msgid "Key illegal in VIEW mode"
msgstr "觀看模式中此按鍵無效"

#: src/nano.c:177
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"

#: src/nano.c:179
#, c-format
msgid ""
"\n"
"Buffer not written to %s (too many backup files?)\n"
msgstr ""
"\n"
"緩衝區無法寫入 %s (太多備份檔？)\n"

#: src/nano.c:190
msgid "Window size is too small for nano...\n"
msgstr "視窗尺寸對 nano 而言太小了...\n"

#: src/nano.c:286
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.  "
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入你想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合你所輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按下輸入鍵則會履行前次的搜尋。"

#: src/nano.c:295
msgid ""
"If you have selected text with the mark and then search to replace, only matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果你已經用標記選擇了一段文字 並進行搜尋替換，就只有在選擇文字中符合者將會被替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式:\n"
"\n"

#: src/nano.c:301
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are fewer lines of text than the number you entered, you will be brought to the last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳列輔助說明\n"
"\n"
" 首先輸入你想去的列數編號並按下輸入鍵 (Enter)。如果文章中的列數比你所輸 入要少，你將會被帶至檔案的最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式: \n"
"\n"

#: src/nano.c:310
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable multiple file buffers with the -F or --multibuffer command line flags, the Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先把檔案的名稱鍵入，它將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果你所編譯的 nano 支援多重檔案緩衝區，並且將此功能以命令列旗標 -F 或 --multibuffer、Meta-F 開關，或者 nanorc 檔案來啟動的話，所插入的檔案 將會被載入另外的緩衝區中 (利用 Meta-< 和 > 在檔案緩衝區間切換)。 "

#: src/nano.c:319
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果你需要另一個空的緩衝區，那就不要輸入任何檔名，或是在提示符號後鍵 入一個不存在的檔名，然後按下輸入鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式:\n"
"\n"

#: src/nano.c:325
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only the selected portion to a separate file.  To reduce the chance of overwriting the current file with just a portion of it, the current filename is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 先鍵入你想要以此來儲存目前檔案的名稱，並按下輸入鍵來儲存檔案。\n"
"\n"
" 如果已經用標記選擇了文字，那麼你將會被提示，只儲存標記部份到另外的檔 案。為了降低目前檔案只被其中部份覆寫的機會，在此模式下，目前的檔名不會 成為預設值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式: \n"
"\n"

#: src/nano.c:339
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to select a file for reading or writing.  You may use the arrow keys or Page Up/Down to browse through the files, and S or Enter to choose the selected file or enter the selected directory.  To move up one level, select the directory called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構，以選取要讀出或寫入的檔案。你可以 使用上下左右鍵或上頁/下頁來瀏覽，並用 S 或輸入鍵來選取所要的檔案或者 進入所選的目錄。要跳到上層時，選擇在檔案列表頂端名為 \"..\" 的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單: \n"
"\n"

#: src/nano.c:352
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to (attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目錄輔助說明\n"
"\n"
" 先輸入你想要瀏覽的目錄名稱。\n"
"\n"
" 如果跳格補正的功能沒有被關閉，你可以利用跳格鍵 (TAB) 去 (嘗試) 自動 補正目錄名稱。\n"
"\n"
" 以下的功能鍵可用於跳至目錄模式: \n"
"\n"

#: src/nano.c:365
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  When an unknown word is encountered, it is highlighted and a replacement can be edited.  It will then prompt to replace every instance of the given misspelled word in the current file, or, if you have selected text with the mark, in the selected text.\n"
"\n"
" The following other functions are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。當遇到一個未知的字，它會 被標記起來，並讓你編輯替代文字。對於目前檔案中每一個拼錯的字，都會顯示 置換的提示；或者，如果已經用標記選擇了文字的話，那就只作用於選取的文字 之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式: \n"
"\n"

#: src/nano.c:380
msgid ""
"Execute Command Help Text\n"
"\n"
" This menu allows you to insert the output of a command run by the shell into the current buffer (or a new buffer in multiple file buffer mode). If you need another blank buffer, do not enter any command.\n"
"\n"
" The following keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"執行命令輔助說明\n"
"\n"
" 本選單允許你將 shell 執行的命令輸出結果，插入目前的緩衝區 (或是多重緩衝 區模式下的新緩衝區)。如果你需要另一個空白緩衝區，就不要輸入任何命令。\n"
"\n"
" 以下的功能鍵可用於執行命令模式: \n"
"\n"

#: src/nano.c:393
msgid ""
" nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of the UW Pico text editor.  There are four main sections of the editor.  The top line shows the program version, the current filename being edited, and whether or not the file has been modified.  Next is the main editor window showing the file being edited.  The status line is the third line from the bottom and shows important messages.  The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面，模仿華盛頓大學的 Pico 文字 編輯器。它含有四個主要部份:頂列顯示程式版本、目前被編輯的檔案名稱， 以及是否這檔案已經更動過。接著是主要編輯區，顯示正在編輯的檔案。狀態 列位於倒數第三列，用來顯示重要的訊息。底部的兩列則顯示編輯器中最常用 到的快捷鍵。\n"
"\n"
" "

#: src/nano.c:404
msgid "The notation for shortcuts is as follows: Control-key sequences are notated with a caret (^) symbol and can be entered either by using the Control (Ctrl) key or pressing the Escape (Esc) key twice.  Escape-key sequences are notated with the Meta (M) symbol and can be entered using either the Esc, Alt, or Meta key depending on your keyboard setup.  "
msgstr "快捷鍵的記號定義如下：控制鍵組 (Control-key) 序列是以一個 \"帽子\" (caret, ^) 符號來表示，它可以藉由控制鍵 (Ctrl) 或是按兩次脫離鍵 (Esc) 來輸入。脫離鍵組 (Escape-key) 序列是以 \"中介\" (Meta, M) 符號表示，它 可以依照你的鍵盤設定，利用 Esc，Alt 或 Meta 來輸入。"

#: src/nano.c:411
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from 000 to 255 will enter the character with the corresponding value.  The following keystrokes are available in the main editor window.  Alternative keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 兩次 之後再鍵入從 000 到 255 之間的三位數字，則會輸入該 ASCII 碼對應的字 元。下列按鍵組合可用於主要編輯區，替代按鍵則顯示於括弧內:\n"
"\n"

#: src/nano.c:441 src/nano.c:572
msgid "enable/disable"
msgstr "開啟/關閉"

#: src/nano.c:477 src/winio.c:2957
msgid "Up"
msgstr "Up"

#: src/nano.c:485 src/nano.c:521
msgid "Space"
msgstr "Space"

#: src/nano.c:1006
#, c-format
msgid ""
"Usage: nano [+LINE] [GNU long option] [option] [file]\n"
"\n"
msgstr ""
"用法: nano [+列數] [GNU 長選項] [選項] [檔案名稱]\n"
"\n"

#: src/nano.c:1007
#, c-format
msgid "Option\t\tLong option\t\tMeaning\n"
msgstr "選項\t\tGNU 長選項\t\t意義\n"

#: src/nano.c:1009
#, c-format
msgid ""
"Usage: nano [+LINE] [option] [file]\n"
"\n"
msgstr ""
"用法: nano [+列數] [選項] [檔案名稱]\n"
"\n"

#: src/nano.c:1010
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "選項\t\t意義\n"

#: src/nano.c:1013
msgid "Show this message"
msgstr "顯示此訊息"

#: src/nano.c:1014
msgid "+LINE"
msgstr "+列數"

#: src/nano.c:1014
msgid "Start at line number LINE"
msgstr "從所指列數開始"

#: src/nano.c:1016
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵功能"

#: src/nano.c:1017
msgid "Backup existing files on save"
msgstr "儲存時備份原始檔案"

#: src/nano.c:1018
msgid "-E [dir]"
msgstr "-E [目錄]"

#: src/nano.c:1018
msgid "--backupdir=[dir]"
msgstr "--backupdir=[目錄]"

#: src/nano.c:1018
msgid "Directory for writing backup files"
msgstr "寫入備份檔案的目錄"

#: src/nano.c:1021
msgid "Enable multiple file buffers"
msgstr "開啟多重檔案緩衝區功能"

#: src/nano.c:1025
msgid "Log & read search/replace string history"
msgstr "記錄與讀取 搜尋/置換 的歷史字串"

#: src/nano.c:1027
msgid "Don't look at nanorc files"
msgstr "不要參考 nanorc 檔案"

#: src/nano.c:1030
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"

#: src/nano.c:1032
msgid "Use more space for editing"
msgstr "編輯時使用更多空間"

#: src/nano.c:1034
msgid "-Q [str]"
msgstr "-Q [字串]"

#: src/nano.c:1034
msgid "--quotestr=[str]"
msgstr "--quotestr=[字串]"

#: src/nano.c:1034
msgid "Quoting string, default \"> \""
msgstr "引用字串，預設 \"> \""

#: src/nano.c:1037
msgid "Do regular expression searches"
msgstr "以正規表示式搜尋"

#: src/nano.c:1042
msgid "-T [#cols]"
msgstr "-T [#行數]"

#: src/nano.c:1042
msgid "--tabsize=[#cols]"
msgstr "--tabsize=[#行數]"

#: src/nano.c:1042
msgid "Set width of a tab in cols to #cols"
msgstr "設定跳格寬度為 #行數"

#: src/nano.c:1043
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"

#: src/nano.c:1045
msgid "-Y [str]"
msgstr "-Y [字串]"

#: src/nano.c:1045
msgid "--syntax=[str]"
msgstr "--syntax=[字串]"

#: src/nano.c:1045
msgid "Syntax definition to use"
msgstr "字串做為語法定義"

#: src/nano.c:1047
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:1048
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"

#: src/nano.c:1049
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 退格鍵/刪除鍵 混淆問題"

#: src/nano.c:1051
msgid "Automatically indent new lines"
msgstr "自動縮排新列"

#: src/nano.c:1052
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"

#: src/nano.c:1054
msgid "Don't follow symbolic links, overwrite"
msgstr "不要依照符號連結，而是覆寫"

#: src/nano.c:1056
msgid "Enable mouse"
msgstr "開啟滑鼠功能"

#: src/nano.c:1059
msgid "-o [dir]"
msgstr "-o [目錄]"

#: src/nano.c:1059
msgid "--operatingdir=[dir]"
msgstr "--operatingdir=[目錄]"

#: src/nano.c:1059
msgid "Set operating directory"
msgstr "設定操作目錄"

#: src/nano.c:1061
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"

#: src/nano.c:1063
msgid "-r [#cols]"
msgstr "-r [#行數]"

#: src/nano.c:1063
msgid "--fill=[#cols]"
msgstr "--fill=[#行數]    "

#: src/nano.c:1063
msgid "Set fill cols to (wrap lines at) #cols"
msgstr "設定行數填滿 (換列) 於 #行數"

#: src/nano.c:1066
msgid "-s [prog]"
msgstr "-s [程式]"

#: src/nano.c:1066
msgid "--speller=[prog]"
msgstr "--speller=[程式]"

#: src/nano.c:1066
msgid "Enable alternate speller"
msgstr "啟用替代的拼字檢查程式"

#: src/nano.c:1068
msgid "Auto save on exit, don't prompt"
msgstr "離開時自動儲存，不要提示"

#: src/nano.c:1069
msgid "View (read only) mode"
msgstr "觀看 (唯讀) 模式"

#: src/nano.c:1071
msgid "Don't wrap long lines"
msgstr "不要自動換列"

#: src/nano.c:1073
msgid "Don't show help window"
msgstr "不要顯示輔助區"

#: src/nano.c:1074
msgid "Enable suspend"
msgstr "開啟暫停功能"

#: src/nano.c:1078
msgid "(ignored, for Pico compatibility)"
msgstr "(忽略，為了與 Pico 相容)"

#: src/nano.c:1085
#, c-format
msgid " GNU nano version %s (compiled %s, %s)\n"
msgstr " GNU nano 版本 %s (編譯於 %s, %s)\n"

#: src/nano.c:1088
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/"
msgstr " 電子郵件: nano@nano-editor.org\t\t網頁: http://www.nano-editor.org/"

#: src/nano.c:1089
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 編譯選項:"

#: src/nano.c:1158
msgid "Sorry, support for this function has been disabled"
msgstr "抱歉，已經關閉此功能的支援"

#: src/nano.c:1186
msgid "Could not pipe"
msgstr "管線功能無效"

#: src/nano.c:1208 src/nano.c:2088 src/nano.c:2233
msgid "Could not fork"
msgstr "執行功能無效"

#: src/nano.c:1263
msgid "Verbatim input"
msgstr "原形輸入"

#: src/nano.c:1602
msgid "Mark Set"
msgstr "標記設定"

#: src/nano.c:1606
msgid "Mark UNset"
msgstr "標記解除"

#: src/nano.c:1913
msgid "Edit a replacement"
msgstr "編輯替代文字"

#: src/nano.c:1995
msgid "Could not create pipe"
msgstr "無法建立管線功能"

#: src/nano.c:1997
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立錯字列表，請稍待..."

#: src/nano.c:2094
msgid "Could not get size of pipe buffer"
msgstr "無法得知管線緩衝區大小"

#: src/nano.c:2145
msgid "Error invoking \"spell\""
msgstr "呼叫 \"spell\" 錯誤"

#: src/nano.c:2148
msgid "Error invoking \"sort -f\""
msgstr "呼叫 \"sort -f\" 錯誤"

#: src/nano.c:2151
msgid "Error invoking \"uniq\""
msgstr "呼叫 \"uniq\" 錯誤"

#: src/nano.c:2241
#, c-format
msgid "Could not invoke \"%s\""
msgstr "無法呼叫 \"%s\""

#: src/nano.c:2358
#, c-format
msgid "Could not create temp file: %s"
msgstr "無法建立暫存檔案: %s"

#: src/nano.c:2370
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤"

#: src/nano.c:2387
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼字檢查失敗: %s: %s"

#: src/nano.c:2390
msgid "Finished checking spelling"
msgstr "拼字檢查結束"

#: src/nano.c:2929
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字串 %s: %s"

#: src/nano.c:3249
msgid "Can now UnJustify!"
msgstr "現在可以還原對齊！"

#: src/nano.c:3348
msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
msgstr "儲存更動過的緩衝區嗎 (回答 \"No\" 會撤銷修改)？"

#: src/nano.c:3407
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:3414
msgid "Use \"fg\" to return to nano"
msgstr "利用 \"fg\" 來回到 nano"

#: src/nano.c:3573
msgid "enabled"
msgstr "開啟"

#: src/nano.c:3573
msgid "disabled"
msgstr "關閉"

#: src/nano.c:3748
msgid "XON ignored, mumble mumble."
msgstr "忽略 XON，嗯嗯"

#: src/nano.c:3751
msgid "XOFF ignored, mumble mumble."
msgstr "忽略 XOFF，嗯嗯"

#: src/nano.c:4138 src/rcfile.c:644
#, c-format
msgid "Requested tab size %s invalid"
msgstr "所要求的跳格寬度 %s 無效"

#: src/nano.c:4187 src/rcfile.c:577
#, c-format
msgid "Requested fill size %s invalid"
msgstr "所要求的填滿行數 %s 無效"

#: src/rcfile.c:121
#, c-format
msgid "Error in %s on line %d: "
msgstr "在 %s 第 %d 列發生錯誤: "

#: src/rcfile.c:178
#, c-format
msgid "Argument %s has unterminated \""
msgstr "引數 %s 有未封閉的 \""

#: src/rcfile.c:195 src/rcfile.c:365
msgid "Missing color name"
msgstr "漏失顏色名稱"

#: src/rcfile.c:223
#, c-format
msgid ""
"Color %s not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"顏色 %s 無法辨識。\n"
"有效的顏色是 \"green\"(綠)、\"red\"(紅)、\"blue\"(藍)、\n"
"\"white\"(白)、\"yellow\"(黃)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
"\"black\"(黑)，選擇性的前置字 \"bright\"(明亮) \n"
"可用於前景色。"

#: src/rcfile.c:246 src/rcfile.c:292 src/rcfile.c:416 src/rcfile.c:462
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"

#: src/rcfile.c:270 src/search.c:61
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "不良的正規表示式 \"%s\": %s"

#: src/rcfile.c:286
msgid "Missing syntax name"
msgstr "漏失語法名稱"

#: src/rcfile.c:378
#, c-format
msgid "Background color %s cannot be bright"
msgstr "背景色 %s 不可為明亮"

#: src/rcfile.c:394
msgid "Cannot add a color directive without a syntax line"
msgstr "無法直接增加顏色而沒有語法列"

#: src/rcfile.c:456
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""

#: src/rcfile.c:528
#, c-format
msgid "Command %s not understood"
msgstr "無法辨識 %s 命令"

#: src/rcfile.c:534
msgid "Missing flag"
msgstr "漏失旗標"

#: src/rcfile.c:556
#, c-format
msgid "Option %s requires an argument"
msgstr "選項 %s 要求引數"

#: src/rcfile.c:589
msgid "Two single-column characters required"
msgstr "需要兩個單行字元"

#: src/rcfile.c:609 src/rcfile.c:619
msgid "Non-tab and non-space characters required"
msgstr "需要非跳格及非空格字元"

#: src/rcfile.c:658
#, c-format
msgid "Cannot unset flag %s"
msgstr "無法解除旗標 %s 設定"

#: src/rcfile.c:664
#, c-format
msgid "Unknown flag %s"
msgstr "旗標 %s 無法辨識"

#: src/rcfile.c:708
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目錄！哇！"

#: src/search.c:89
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#: src/search.c:170
msgid "Search"
msgstr "搜尋"

#: src/search.c:175
msgid " [Case Sensitive]"
msgstr " [符合大小寫]"

#: src/search.c:182
msgid " [Regexp]"
msgstr " [正規表示式]"

#: src/search.c:189
msgid " [Backwards]"
msgstr " [向後搜尋]"

#: src/search.c:195
msgid " (to replace) in selection"
msgstr " 在標記中(置換)"

#: src/search.c:197
msgid " (to replace)"
msgstr " (置換)"

#: src/search.c:396
msgid "Search Wrapped"
msgstr "已從頭搜尋"

#: src/search.c:504 src/search.c:507 src/search.c:558 src/search.c:561
msgid "This is the only occurrence"
msgstr "這是惟一出現之處"

#: src/search.c:567
msgid "No current search pattern"
msgstr "沒有符合目前搜尋形式者"

#: src/search.c:770
msgid "Replace this instance?"
msgstr "置換這個？"

#: src/search.c:925
msgid "Replace with"
msgstr "以此置換"

#: src/search.c:965
#, c-format
msgid "Replaced %ld occurrence"
msgid_plural "Replaced %ld occurrences"
msgstr[0] "已置換 %ld 處"

#: src/search.c:979
msgid "Enter line number"
msgstr "輸入列號"

#: src/search.c:1002
msgid "Come on, be reasonable"
msgstr "別這樣，理性一點"

#: src/search.c:1067
msgid "Not a bracket"
msgstr "並非一個括號"

#: src/search.c:1115
msgid "No matching bracket"
msgstr "無對應括號"

#: src/utils.c:296 src/utils.c:306
msgid "nano is out of memory!"
msgstr "nano 已耗盡記憶體！"

#: src/winio.c:2757 src/winio.c:2762
msgid "Modified"
msgstr "已更動"

#: src/winio.c:2759
msgid "View"
msgstr "觀看"

#: src/winio.c:2778
msgid "DIR:"
msgstr "目錄:"

#: src/winio.c:2785
msgid "File:"
msgstr "檔案:"

#: src/winio.c:3138
msgid "Refusing zero-length regex match"
msgstr "拒絕符合長度為零的正規表示式"

#: src/winio.c:3656
msgid "Yy"
msgstr "Yy"

#: src/winio.c:3657
msgid "Nn"
msgstr "Nn"

#: src/winio.c:3658
msgid "Aa"
msgstr "Aa"

#: src/winio.c:3671
msgid "Yes"
msgstr "是"

#: src/winio.c:3676
msgid "All"
msgstr "全部"

#: src/winio.c:3681
msgid "No"
msgstr "否"

#: src/winio.c:3820
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%ld (%d%%)"
msgstr "列 %ld/%ld (%d%%), 行 %lu/%lu (%d%%), 字元 %lu/%ld (%d%%)"

#: src/winio.c:4127
msgid "The nano text editor"
msgstr "nano 文字編輯器"

#: src/winio.c:4128
msgid "version"
msgstr "版本"

#: src/winio.c:4129
msgid "Brought to you by:"
msgstr "來自於:"

#: src/winio.c:4130
msgid "Special thanks to:"
msgstr "特別感謝:"

#: src/winio.c:4131
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"

#: src/winio.c:4132
msgid "For ncurses:"
msgstr "ncurses 部份:"

#: src/winio.c:4133
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人..."

#: src/winio.c:4134
msgid "Thank you for using nano!"
msgstr "謝謝你使用 nano！"