The old address has become invalid, and probably does not have enough
room for the write, thus causing a crash.
This fixes https://savannah.gnu.org/bugs/?57858.
Bug existed since commit 8625609c from two days ago.
Not doing it characterwise saves a reallocation, a memmove(), several
checks, and an update_undo() for each character over one.
This has been tested by temporarily setting 'bracketed_paste = FALSE'
instead of 'bracketed_paste = TRUE' in convert_sequence() in winio.c,
and then pasting stuff into nano.
And before the buffer size is adjusted, so that the add_undo()
doesn't need to correct the stored former size of the buffer.
This will allow the injection of multiple characters at once,
in the next commit.
Using straightforward comparisons is clearer and faster and shorter.
Again, note that this does not filter out 0x7F (DEL). But that is
okay, as that code will never be returned from get_kbinput().
The few calls of the injection routines that had 'filtering' set to
TRUE have already filtered out ASCII control codes earlier on. And
in the case of injecting a completion, this completion only contains
word-forming characters -- and if the user somehow added a control
code to the word-forming characters, then nano should NOT filter it
out, so in fact that setting of 'filtering' to TRUE was mistaken.
Note that this filtering did not filter out 0x7F (DEL). But that is
fine: it should not occur in the input stream at that point anyway,
as it gets translated to either KEY_DC or KEY_BACKSPACE earlier in
the keyboard parsing routines.
When at startup the user presses Cancel at the "open anyway?" prompt,
cancel the whole startup: quit. But when the user answers No, just
skip the file and continue starting up.
The 'prev' and 'next' links get assigned to immediately after the
call of copy_node(). And anyway, it does not make sense to link
a copied node to the predecessor and successor of its original.
Also slightly regroup some lines.
Also, the disabling of the keyboard interrupt (SIGINT) must happen
after that initialization call, otherwise ^C will still do nothing
after returning from suspension (when nano is built against Slang).
This fixes https://savannah.gnu.org/bugs/?57656.
Bug existed since version 2.2.0, commit daaf468c.
The tiny version is oblivious of bracketed pastes, as it serves no
purpose: in the tiny version there is no auto-indent nor undo nor
tabs-to-spaces conversion.
Any modifier keys that are needed to start the execution of a macro
(or of a string bind) should not affect the interpretation of the
keystrokes that are contained within the macro or the string.
This fixes https://savannah.gnu.org/bugs/?57660.
Bug existed since macros were introduced, in version 2.9.0.
As long as the user does not define any Sh-M-X bindings in their nanorc,
<Shift> and <CapsLock> will not have any effect on <Alt+letter> combos.
But as soon as any Sh-M-X combination is bound, <Shift+Alt+letter> will
be seen as different from the unshifted keystroke.
This kind of fulfills https://savannah.gnu.org/bugs/?54659.
Requested-by: Peter Passchier <peter@passchier.net>
The suppression of auto-indentation, automatic hard-wrapping, and
tab-to-spaces conversion is now inherent in the way the reading-in
of a bracketed paste is handled by the previous commit: as a single
block of text.
This makes an external paste (with mouse or <Shift+Insert>) behave
the same as an internal paste (^U), and also inherently suppresses
auto-indentation, automatic hard-wrapping, and tab conversion.
This fulfills https://savannah.gnu.org/bugs/?54950.
Also, do not break overlong lines and do not convert tabs to spaces,
nor interpret a <Tab> as an indent command (when the mark is on).
In other words: accept an outside paste as literally as possible.
This fulfills https://savannah.gnu.org/bugs/?40060.
Requested-by: Egmont Koblinger <egmont@gmail.com>
And fulfills https://savannah.gnu.org/bugs/?57527.
Requested-by: Sébastien Desreux <seb@h-k.fr>
Requested-by: Hans Ecke <hecke@gxt.com>
Original-idea-by: Brand Huntsman <alpha@qzx.com>
Also, tell the terminal to switch on bracketed-paste mode, and toggle
a boolean when the start and stop sequences of such a paste are seen.
This boolean can later be used to suppress auto-indent and such.
Signed-off-by: Brand Huntsman <alpha@qzx.com>
The extract() and copy_from_buffer() functions are mainly used for
cutting a line or a region, so move them to src/cut.c. Also move
the function for which copy_from_buffer() is a wrapper.
When suspending nano on a Linux console (or FreeBSD console), the
helpful message about using the 'fg' command overwrote the start
of the second help line, kind of hiding the message. So, output
a double newline before the message to make it stand out.
Also, drop a pointless cursor movement, as endwin() determines
the placement of the cursor all by itself.
Since the previous commit, USE_SLANG can only be defined when NANO_TINY
is also defined. This means that code that is present only in non-tiny
versions does not need to cater for Slang.
After the previous change, all remaining calls of parse_mbchar() have
NULL as their third parameter. So, drop that parameter and remove the
chunk of code that handles it. Also rename the function, as there are
already too many functions that start with "parse".
Do not wait for the user to press a key when there is some problem
with any of the history files. Just start and indicate the problem
on the status bar. The precise error message is stored and will be
shown on the terminal when exiting from nano.
This addresses https://savannah.gnu.org/bugs/?56524.
For the three operations (justification, spell checking, and filtering)
that need to undo or redo two suboperations (cutting and then pasting)
in one go, pass the message that describes the operation to add_undo(),
so that the undo item does not need to be modified after the call.
This looks better, but does add some twenty NULL parameters elsewhere.
As printf() is not UTF8-aware, we have to determine ourselves how many
columns each short and long flag take up and add the required number of
spaces (not tabs, because their size is not fixed) to fill things up.
This fixes https://savannah.gnu.org/bugs/?56928.
Bug existed since version 4.3, commit 2f169107.
For a forward search from the command line, pass FALSE to 'skipone'
so that an occurrence at the head of the file is not skipped over.
This fixes https://savannah.gnu.org/bugs/?56845.
Reported-by: Derek Wolfe <dwwolfe1@gmail.com>
Signed-off-by: Brand Huntsman <alpha@qzx.com>
Allow the user to specify that the search string should be interpreted
case-sensitively and/or as a regular expression by preceding the search
indicator (/ or ?) with c and/or r. Or to switch these things off by
using C and/or R.
Signed-off-by: Brand Huntsman <alpha@qzx.com>
Signed-off-by: Benno Schulenberg <bensberg@telfort.nl>
The string to "jump to" is specified with +/ for a forward search
(from the top of the file), or with +? for a backward search (from
the bottom of the file).
This fulfills https://savannah.gnu.org/bugs/?54535.
Requested-by: Derek Wolfe <dwwolfe1@gmail.com>
With-help-from: Brand Huntsman <alpha@qzx.com>
The check mistakenly prevented the user from copying a region that
ended at EOF. Removing the check also gives the user a way to clear
the cutbuffer (with M-A M-6 or ^6 M-6, for example).
This fixes https://savannah.gnu.org/bugs/?56563.
Reported-by: Liu Hao <lh_mouse@126.com>
The use of a double dash (for an option name or as sentence separator)
is too common to allow it to be seen always as a comment introducer.
Users of Lua and Postgres will have to redefine 'quotestr' themselves
if they want to be able to rewrap block comments with ^J.
The other characters that were added in commit c5a72103 (!, %, and ;)
are less problematic because they tend to be glued to the end of words,
so they are unlikely to appear at the start of a line.
This fixes https://savannah.gnu.org/bugs/?56462,
and fixes https://savannah.gnu.org/bugs/?56461.
Bug existed since version 4.0, commit c5a72103.
This "holder" information is needed for every cut and paste and other
block operation. Instead of allocating and freeing it for every such
operation, just have the six elements as static variables. This saves
a little churn, and saves having to declare a type that is used just
once. Plus, the access to these variables will be a little quicker.
Add a temporary boolean for this, because isendwin() returns TRUE
only when curses mode has actually been started with initscr() and
then exited with endwin().
The sphere, the holder, is everything *around* the partition;
it was confusing to call this holder type 'partition'.
Also correct and improve some comments.
The extra things that close_buffer() did are only needed and useful
when manually closing a buffer, so move them there. The other three
calls of close_buffer() only need to get rid of the current buffer
(making the preceding buffer the new current one) and nothing else.
The previous commit makes that the terminal's state is only resaved
when standard input is actually reconnected to the terminal, and
leaves it unchanged otherwise. Apparently this is enough to fix
https://savannah.gnu.org/bugs/?56394.
When after reading a file we are not in curses mode, it means we have
read data from standard input, either from the keyboard or from a pipe.
In the latter case, we first need to reconnect standard input to the tty.
And in both cases, we then need to reenter curses mode before being able
to display the number of lines that were read (or an error message).
So, move the reconnecting code from scoop_stdin() to its own function,
and call this function from read_file() when needed.
This fixes https://savannah.gnu.org/bugs/?56310.
Bug existed since version 2.1.8 when reading from stdin was introduced.
For some reason a SIGWINCH or SIGINT "corrupts" the current state of
the terminal, and magically validates the state that was saved first.
This fixes https://savannah.gnu.org/bugs/?56394 properly.
The user will understand that changing the state of the terminal
while inputting data into nano is not the same as changing this
state before nano has started or after nano has exited.
This fixes https://savannah.gnu.org/bugs/?56394.
Bug existed since version 2.4.2.
Either this enabling is not needed at all when the original terminal
state has been restored, or it will be needed in the tiny version too.
Also condense some comments.
Don't bother checking for an error from sigaction(), because the only
things it could error out for is when it is passed an invalid signal
(which SIGINT isn't) or oldaction/newaction would point to memory that
is outside of nano's control (which is obviously not the case).
Also, the setup of signal handlers during startup does not check for
errors, so why do it here?
Use printf's ability to align things (instead of trying to do it
ourselves and failing when the tab size of the terminal is not 8.)
Suggested-by: Vincent Huisman <site.gentoobugzilla@dataghost.com>
This fixes https://savannah.gnu.org/bugs/?56372.
Reported-by: Vincent Huisman <site.gentoobugzilla@dataghost.com>
This is needed to implement the demand loading of syntax files, as any
errors that these files may contain would otherwise overwrite things on
the screen and the messages wouldn't be on the terminal when nano exits.
It also allows nano to start up on a Linux console when there are errors.
Signed-off-by: Brand Huntsman <alpha@qzx.com>
When the data is fed to nano through a pipe, it is pointless to print
this message as it can be seen only after nano has exited.
This addresses https://savannah.gnu.org/bugs/?56348.
The blank filename should not give any match, but maybe the header line
or the magic finds a fitting syntax.
This fixes https://savannah.gnu.org/bugs/?56344.
If the cursor is near the bottom row when softwrap gets switched on, the
screen should scroll just the amount needed to keep the cursor onscreen.
This fixes https://savannah.gnu.org/bugs/?56317.
Bug existed since softwrapping was introduced in version 2.1.11.
The 'keep_cutbuffer' variable becomes FALSE whenever there is cursor
movement or there was a marked region. Use this variable to simplify
the condition for creating a new ZAP undo item. But then typing the
'zap' shortcut should not cause the variable to be set to FALSE.
This fixes the first part of https://savannah.gnu.org/bugs/?56261.
Bug existed since zapping was introduced, in version 3.2.
When 'last_action' has a specific value, then necessarily there must
exist a corresponding current undo item.
(The condition is already absent in do_deletion(), for the BACK and DEL
undo items, and it works fine there.)
The lines from the cutbuffer will be renumbered when it matters: when
they get pasted.
The only place that used the numbering of (a copy of) the cutbuffer
(the updating of an undo item) already iterates through its lines.
Just add a counter there instead of making use of the line numbers.
All extractions are done into the cutbuffer, so it is pointless to pass
'cutbuffer' and 'cutbottom' in and back out as parameters all the time.
Just use those global variables directly.
Also, rename the function as there is no longer a buffer among its
parameters.
The line numbers don't matter for the cutbuffer itself, but they matter
for the copy of the cutbuffer that is stored in an undo item.
This reverts commit 14140d52 from two hours ago.
This fixes https://savannah.gnu.org/bugs/?56245.
After extracting a line or region, the current line is always the one
where renumbering should start. And when ingrafting a buffer, it is
always the first ingrafted line where renumbering should start. The
'top_save' variable was indirectly getting set to those lines.
Also, renumber immediately after unpartitioning the file buffer, before
doing anything else.
It doesn't matter whether the grafted text contains a newline or not.
It only matters whether the mark was before or after the cursor. When
it was after the cursor, the mark needs to be set to the bottom line of
the grafted text and its x coordinate needs adjustment; and when it was
before the cursor, the mark just needs to be set to the top line of the
grafted text.
Now you can have a look elsewhere in the buffer (and even delete
or paste stuff there) and when you return to the original line
and continue typing, any spillover from automatic hard-wrapping
will spill over onto the same line it spilled over to before.
You can even switch to a different buffer and return and continue
typing, and stuff will still spill over to the same line.
In the bargain, this gets rid of a bit of flag-resetting code
that was run for many keystrokes, in most cases needlessly.
This addresses https://savannah.gnu.org/bugs/?56189.
All other options are off by default and can only be switched *on*
(either by a command-line option or a nanorc setting) -- there are
no command-line options to switch them off again. Except for the
--breaklonglines/--nowrap pair. So these need special handling.
This fixes https://savannah.gnu.org/bugs/?56119.
Reported-by: Sébastien Desreux <seb@h-k.fr>
Bug existed since version 4.0, commit 4d40bea5.
For relatively inexperienced users (as most users of nano probably are)
it is far better that nano produces POSIX text files by default, where
each line ends with a newline character. This means that these files
will "print" properly (not gluing the next prompt at the end of the
last line), tools will see and process each line of them, and, while
editing, adding text at the end is easier.
This addresses https://savannah.gnu.org/bugs/?55997.
Reported-by: Ralph Corderoy <ralph@inputplus.co.uk>
When nano was configured with --enable-tiny --enable-speller, the
block_sigwinch() function should be available, to mask SIGWINCHes
during a spell check.
Somehow a SIGWINCH pushes nano past the wait() in do_alt_speller(),
even though the external spelling program hasn't finished.
This fixes https://savannah.gnu.org/bugs/?56010
by reverting commit 1f39f60b.
Bug existed since version 3.2.
When there is a dash among the files on the command line, nano will read
data from standard input, which means that the latter is not connected to
a terminal and thus cannot be recognized as a Linux VT until nano has
finished reading the input and has reconnected the input source to the
terminal.
The first probe for a Linux VT is kept in place for now, so that nano
can stop when there are errors in an rcfile while running on a VT.
(This stopping will not work when data is read from standard input,
of course, but that is a smaller fish.)
This fixes https://savannah.gnu.org/bugs/?55912.
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Bug existed since the recognition of modified cursor keys on a Linux
console was introduced, in version 2.6.3, commit 290d278f.
Option -J (--guidestripe) takes a column number as argument and then
shows a vertical, colored bar over the entire height of the buffer,
to aid the user in regulating the width of the text when the terminal
is wider than this desired width.
This fulfills https://bugs.debian.org/916392.
Requested-by: Arturo Borrero González <arturo@debian.org>
And fulfills https://savannah.gnu.org/bugs/?55315.
Requested-by: Bryan Christ <bryan.christ@gmail.com>
If these two command-line options would override an rcfile setting of
their counterpart new option, the user might come to expect being able
to do this also in the future. But these old options will be obsoleted
at some moment, so... better start ignoring them right now.
Also, enable smooth scrolling by default, and don't waste the row
directly below the title bar. The use of the latter also serves
as a small visual reminder that this nano is different.
This addresses https://savannah.gnu.org/bugs/?55067.
This signals our break from trying to be as compatible with Pico as
possible. We were already incompatible with modern Pico in the -n
and -W options, and in several character-set and color options, so
ignoring those five options brought us very little.
Anyway, soon some of those options will be reused and will have the
effect of making nano look and behave more like Pico.
Now also comment blocks in Fortran, Lisp, Lua, Postgres, and TeX
can be rewrapped with ^J.
This partially addresses https://savannah.gnu.org/bugs/?55435.
Kind-of-requested-by: David Griffith <dave@661.org>
When the user switches backups on later (with M-B in the ^O menu),
the specified folder should have been checked for validity.
This fixes https://savannah.gnu.org/bugs/?55423.
Bug existed since the check for a valid backup directory was introduced
in version 2.8.7, commit 751e7f0f.
Benno Schulenberg