Decode 0x0A bytes to 0x00 when saving the search history, and encode
them again when reading the file back in, to prevent nano from hanging
or aborting when encountering 0x00 on a line by itself.
After updating the color palette, the corresponding new window content
should be drawn immediately, before some other part of the code calls
doupdate(), to prevent the old content being shown in the new colors.
This fixes https://savannah.gnu.org/bugs/?49912.
Reported-by: Mike Frysinger <vapier@gentoo.org>
A filename might contain spaces, so we can't look for the numbers
(the second and third elements) starting from the head of the line
-- we have to start at the tail and work backward.
This fixes https://savannah.gnu.org/bugs/?49879.
So they will not break a line in the positionlog file in two.
(Strangely, the reading in of such a log file already decodes
nulls back into newlines.)
This fixes https://savannah.gnu.org/bugs/?49877.
Most full paths are needed only temporarily and will be freed within
milliseconds. Only 'full_operating_dir' and 'backup_dir' continue to
exist for the whole current session. Any partition, too, will soon be
unpartitioned, so the extra reallocation is just a waste of time.
The functions read() and fwrite() take size_t, not ssize_t.
And line numbers in the file should be displayed as a long type instead
of an int, since the effective type of ssize_t is not int, but long.
Achieve this by reusing the code that gives feedback when trying to
save a buffer while using --tempfile and the file has no name yet.
This fixes https://savannah.gnu.org/bugs/?48622.
If it would, the returned file descriptor would make nano crash,
because the corresponding stream has not been opened. And when
returning zero instead (as the code did originally), nano would
open an empty buffer, although it claims to be reading the file.
In short: I think this is a leftover of an attempted fix of
https://savannah.gnu.org/bugs/?25297, from commit 2823c99.
Add the keycodes and routines to allow the user to forego setting the
mark explicitly (with M-A / ^6) and instead quickly select a few words
or lines by holding down Shift together with the movement keys.
(Some combinations with Shift are swallowed by some terminal emulators.
To work around some of those, the combinations Shift+Alt+Left/Right work
as Shift+Home/End and Shift+Alt+Up/Down work as Shift+PageUp/PageDown.)
Don't make it the responsibility of the executed functions to restore
the list of shortcuts of the edit window. Just detect whether another
menu was displayed, and if so, redisplay the main menu.
Specifying an operating directory should either lead to a successfull
confinement, or nano should fail to start.
(Also: save the terminal settings as soon as possible, so that an early
die() will not restore uninitialized values.)
This fixes the first part of https://savannah.gnu.org/bugs/?47798 properly.
This fixes https://savannah.gnu.org/bugs/?48103.
(The fix is wasteful -- it should only discard the multidata if actually
the name *did* change, *and* if the applicable syntax changed.)
That is: don't mix the number of lines read with a warning about the
file being unwritable -- the former is just convenience information,
the latter is a must-see.
This fixes https://savannah.gnu.org/bugs/?48047.
Move the initialization of the operating directory to after the
initialization of the screen, so that the above error can be shown.
This fixes the first part of https://savannah.gnu.org/bugs/?47798.
Between the first stat (that sets 'realexists') and the second stat
(directly after), the file might have disappeared, which would mean
that current_stat would be NULL. Prevent dereferencing this further
down.
Only when the user decides not to override an existing lockfile should
loading the corresponding file be skipped. Any failure to write the
lockfile should be ignored -- the file itself should be loaded anyway.
This fixes https://savannah.gnu.org/bugs/?47945.
Error messages about lock files should not get overwritten by purely
informational messages, only by alerting ones.
This fixes https://savannah.gnu.org/bugs/?47963.
The variable 'namecopy' has been passed to dirname(), so it is likely
to have been changed when it contains a slash. So, use a new variable
instead. Also, free the result of display_string().
This fixes https://savannah.gnu.org/bugs/?47956.
Having just opened a fresh buffer, 'openfile->next' will never be NULL,
because the list is circular.
Second, when compiled with --disable-nultibuffer, and deciding not to
override an existing lock, the 'return FALSE' should *not* be skipped,
because otherwise the named file will be opened after all.
This fixes an unreported bug.
If during startup there are multiple error messages, currently only the
last one remains and can be read. To improve on that, introduce a short
pause between error messages -- even if it's not enough to read them all,
at least the user will be aware that there are multiple ones.
This also causes a few error messages to beep that currently don't beep,
such as when a file is unwritable.
Since nano-2.4.1, reading in or pasting a large piece of text would put
the cursor on the bottom line, leaving only one line of the non-read or
non-pasted text visible. This is different from the centering behavior
of Pico, and somewhat disorienting, as you can't see "where you are" any
more in relation to the file as it was.
So now center the cursor whenever the read or pasted text is larger than
the screen, but don't center it when the text fits entirely on the screen.
(The latter avoids the effect of the screen jumping unnecessarily when
inserting just a few lines while the cursor is near the bottom.)
To achieve this behavior: default to focusing, and temporarily set it to
FALSE when the focusing effect is unwanted.
This fixes https://savannah.gnu.org/bugs/?47841.
Add a global variable, 'present_path', so that 'cwd_tab_completion()'
knows where the user is in the browser, so that it can try completions
against names in that directory instead of always against names in the
current working directory (where nano was invoked).
This fixes https://savannah.gnu.org/bugs/?47234.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
For a little contrast with the function edit_refresh() -- it's
annoying that when you search for the latter you get to see all
the settings of the flag too.
The function edit_update() is called by edit_refresh() itself, so it is
silly that the first sets 'edit_refresh_needed' to TRUE. This setting
is needed only in a few cases -- in the others it's not needed because
the screen does not need to be refreshed (it was just about positioning
the cursor), or 'edit_refresh_needed' has already been set by a call to
goto_line_posx(). So, just set the flag in the five places that need it
and spare the other four calls.
Since commit 41ed690, cancelling a prompt after tabbing would sometimes
leave the list of file names on the screen. When testing this first,
it worked fine -- I was fooled again by 'edit_refresh_needed' already
being TRUE when nano has just started up and sits waiting for the first
key stroke. I have to hunt this down and kill it.
A normal lock file is apparently 1024 bytes in size, so the second
attempt at reading bytes from the file would try to read 8192 more
bytes into a buffer that has room for only 7168 left. According to
valgrind, the read() function doesn't like that -- and true: if for
some reason the lock file had suddenly expanded, the buffer would
overflow.
This fixes https://savannah.gnu.org/bugs/?47156.
Commit 36ec76a made the wrong change: after a tab that did not list any
file names on the screen, a refresh /is/ needed, because a previous tab
might have listed things on the screen. But at the end of the prompt,
it is not necessary to refresh the edit window if things were listed,
because the window will be refreshed anyway after reading in a file.
Use 'slash' to point at a possible slash, use 'filename' just to
point at the real file name, and use 'wasdirname' just to point at
the dir's name before expanding it in order to be able to free it.
Also, remove two superfluous asserts: 'dirname' cannot be NULL
because it has just been mallocstrcpy'd, and checking 'num_matches'
is pointless as it would crash on the next statement anyway.
This is a remnant from 2001, when things were different. Now, there
is no need to refresh the edit window when tabbing produced no list.
When it did produce a list, it is cleared off later.
If for some reason opening the spell-checked or formatted file fails,
don't throw away the current contents of the buffer.
(It should also give proper feedback about the failure, but we'll leave
that for some other time.)
Also, store the input character earlier, so we don't have to use len - 1.
Furthermore, len increments in steps of 1, so it cannot pass the value of
bufx unnoticed, so use a comparison for equality.
Most of the time NO_CONVERT will not be set, the number of lines will
not be zero, and the format of the file will be zero. Rearrange the
conditions so that they will evaluate as FALSE as soon as possible.
Index i follows almost synchronously the value of len. Since we're
adding characters to the intermediate buffer always only at the end,
just use len as the index.
Until now (when not leaving files unconverted), nano would fumble and
drop the final carriage return of a Mac file, and would thus treat the
last line of such a file as an unterminated line and prepend it to the
current line of the buffer. Correct that, and delete the dead piece
of code that was meant to do this.
This fixes https://savannah.gnu.org/bugs/?47716.
When we don't set edittop in read_line(), we don't need to readjust it in
read_file(), because in that particular case it will still be pointing at
current. And since fileptr is a new, freshly created line, it can never
be equal to filebot, so there is no point in comparing them.
If more than one line was inserted at the beginning of the file, leave it
up to the screen handling to set edittop to what it should be.
Move the setting of fileage a bit down, to its sister setting: the line
at current gets "connected" either to the top-of-file pointer or to the
last line of the inserted file.
(This change will be made superfluous when we start using gnulib.)
This prevents getcwd() from failing on Android and thus completes the
fix for https://savannah.gnu.org/bugs/index.php?47659.
Reported-by: Chris Renshaw <osm0sis@outlook.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Doing a chdir("..") will not fail when the root directory is reached,
and when getcwd() keeps failing too, we have no way of knowing when
to stop. So, simply limit the number of attempted chdirs, to avoid
getting into an endless loop.
This avoids the hang in https://savannah.gnu.org/bugs/index.php?47659.
Reported-by: Chris Renshaw <osm0sis@outlook.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Instead of allocating a fixed amount of 128 bytes, which will overflow
and segfault, adjust the allocation to the length of the file name, and
if necessary trim the file name to make the prompt fit on the screen.
This fixes https://savannah.gnu.org/bugs/?47511.
Reported-by: Aapo Rantalainen <aapo.rantalainen@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
the first element, and the insertion of a new element) directly.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5678 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
when the first Tab added the part that all matches have in common.
So now two Tabs in a row will always show the list of possible
completions -- if there /are/ any completions. Which means that
a second Tab will either: 1) do nothing, when the name is complete
and exists; 2) beep, when nothing in the current directory starts
with the current string; 3) show the list of matches.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5656 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
instead of in the given string. This fixes Savannah bug #47199.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5654 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes Savannah bug #47129 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5647 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and also when it is the first and only line.
This fixes Savannah bug #47153 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5646 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
needed), so that it no longer shows in the help screen nor in the file list.
This fixes Savannah bug #47126.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5640 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
With this option, nano would simply refuse to write to any symlinked file;
if anyone really used this option, they would certainly have complained.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5608 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes a segfault reported in Savannah bug #47011.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5596 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(So that most likely not more than two hundred plus a handful
will be written out. This was the easiest to implement.)
See https://lists.gnu.org/archive/html/nano-devel/2016-01/msg00050.html.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5571 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
There's a bunch of return cases where we don't free the new full filename
which leads to leaks when writing out new files. One way to reproduce:
$ rm -f foo
$ nano foo
<hit enter>
<ctrl+o to save>
<ctrl+x to exit>
-> memory leak
Patch by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5563 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
changed buffer after all, as the buffer may not have a name yet.
This fixes Savannah bug #46752.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5512 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
there's an error saving history state at exit is pointless and annoying.
Just notify the user and move on.
Patch by Mike Frysinger, tweaked and extended by Benno.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5507 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
not just for the first. This fixes Savannah bug #46511.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5500 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Users who want an immediate save, can bind the function 'savefile'.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5489 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
writing out the file immediately, without prompting.
Patch by David Lawrence Ramsey.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5378 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
nor bothering with a separate initialization function when it's used only once.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5365 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
first asking for its name. Patch was suggested by Seiya Nuta.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5318 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
opening an empty buffer when the name of a directory is specified.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5304 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
before finding a unused filename takes an annoying amount of time.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5225 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
switch_to_prevnext_buffer() to support message passthrough
when trying to lock files using multibuffer.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5105 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
* src/files.c (open_buffer): Check here for locking and properly
handle choosing to not open a file when locked instead of in
open_file(). Fixes Savannah bug 42373 reported by Benno Schulenberg
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5104 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
* src/files.c (do_lockfile, open_file): If locking fails,
allow the lock failure message to be preserved AND
preserve the filename passed on the cmdline. Fixes
Savannah bug #42668.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5059 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
* src/files.c (do_lockfile): Check whether the directory
of the file we're trying to lock exists, and make the
resulting error message more intuitive. Fixes
Savannah bug 42639 by bens.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5056 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
having them declared everywhere and passing them around endlessly.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5039 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
when --tempfile was given and the current buffer has no name.
This fixes Savannah bug #41750. Patch by David Lawrence Ramsey.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4974 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
line numbers are long, x positions unsigned long.
Patch by David Lawrence Ramsey.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4950 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
null_at(), adding a cast, and using an unsigned type for a length.
Patch by David Lawrence Ramsey.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4939 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
on the command line as a new file. Patch by Hans Alves.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4754 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
blank lines. Patch by David Lawrence Ramsey was lightly tweaked.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4750 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
Benno Schulenberg