The basic idea is that the cursor is always off, except when it needs
to be on: when waiting for text input, and in a few other cases: when
something was searched and found in the help viewer, and in the file
browser when option -g is in effect.
This fixes https://savannah.gnu.org/bugs/?51923.
Reported-by: Mike Frysinger <vapier@gentoo.org>
When multiple buffers are open, replace nano's name and version number
with an indication how many buffers are open preceded by the sequence
number of the current buffer.
Signed-off-by: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@telfort.nl>
Adding text plus whitespace while the cursor is at or near the topleft
corner of the edit window can cause a change in the preceding chunk,
throwing firstcolumn out of alignment. Catch this special case.
This fixes http://savannah.gnu.org/bugs/?51743.
It would be horrible if the user expects to find numbered backups
of all the files that were changed but they are NOT there because
the config file contains a typo or the relevant directory was moved
or renamed or something. So... if the specified backup directory
is not usable, nano should complain and simply not start up.
The new option 'set selectedcolor' applies to marked text, to the
currently selected file in the file browser, and to the highlighted
match during interactive search-and-replace.
Commit 28beb3f added the 'forreal' parameter to prevent spotlight() from
placing the cursor wrongly due to an invalid placewewant. However, since
the variable-width softwrap overhaul (specifically, since commit 8490f4a),
place_the_cursor() no longer checks placewewant, so the parameter is no
longer needed.
Furthermore, dropping 'forreal' and thus always setting current_y won't
affect the operation of spotlight(), since the only functions that use
spotlight() (do_replace_loop() and do_int_spell_fix()) both call
edit_refresh() beforehand, which means that current_y will already
have been set to the value it will be set to again.
For some reason, when returning from suspension, SLang will produce
either a clipped error code (0xFF instead of 0xFFFF, when returning
from an externally induced suspension), or it will clip the code of
first subsequent keystroke to a single byte (when returning from a
normal, in-editor suspension: ^Z).
Side-step this by ignoring the clipped error code, and by using an
undefined control code as the first fake keystroke. Ignoring the
clipped error code is not possible when using a single-byte locale,
otherwise the user would not be able to type the character with
code 0xFF (although it could still be entered with Esc Esc 255).
This fixes https://savannah.gnu.org/bugs/?51477.
The help lines need to be redrawn one step after a justification
(whether it has been undone or not, to replace "Unjustify" with
"Uncut" again for ^U), and after switching buffers (to update a
possibly changed tag for ^T).
This fixes https://savannah.gnu.org/bugs/?51455.
get_chunk_row() replaces the formula "column / editwincols".
get_chunk_leftedge() replaces "(column / editwincols) * editwincols".
get_last_chunk_row() replaces "strlenpt() / editwincols".
get_last_chunk_leftedge() replaces "(strlenpt() / editwincols) * editwincols".
This prepares us for any changes in those formulas, and for more such
functions later.
The extra variable is not needed, because when having read from
standard input, the filename will simply be empty. It will not
be empty for any other file that was read.
A recent change (8dffb00f) removed this ability. This change restores
it, and also allows reading from standard input multiple times -- maybe
not useful, but it works.
Also when a dash is the first "file" mentioned on the command line,
nano should show this buffer at startup and not the next.
This fixes https://savannah.gnu.org/bugs/?51207.
The old praxis of calling total_refresh() upon a SIGCONT was confusing,
because the screen would look as if nano had returned from suspension,
but in fact the shell was still active.
Instead of calling total_refresh(), put a no-op key into ncurses' buffer,
so that, when nano actually does return out of suspension (through 'fg'),
this key will be read and discarded, upon which nano will go sit and wait
for the next key, just before which it calls doupdate(). The latter is
all we need to get the entire screen restored.
This also fixes https://savannah.gnu.org/bugs/?51131 for "tiny".
When receiving a SIGCONT, don't call regenerate_screen() directly
but act as if a SIGWINCH occurred. Also insert a dummy key, and
thus let the relevant input routine redraw the relevant subwindows.
Use KEY_F0 as the dummy key, as both Ncurses and Slang know it, and
it should normally do nothing at all.
This fixes https://savannah.gnu.org/bugs/?51124.
Apparently the curses on SunOS is less forgiving than the one on GNU.
Or rather: delwin(NULL) should just return an error, it shouldn't crash.
This fixes https://savannah.gnu.org/bugs/?51053.
Reported-by: John Wiersba <jrw32982@yahoo.com>
Solved-by: John Wiersba <jrw32982@yahoo.com>
When spotlighting the string to be replaced, placewewant isn't valid,
so tell place_the_cursor() to ignore its value to avoid the cursor
getting mistakenly placed at the beginning of the next row.
This fixes https://savannah.gnu.org/bugs/?50997.
Reported-by: David Lawrence Ramsey <pooka109@gmail.com>
Also when toggling the help lines back on or the extra editing space
back off, keep the cursor near the bottom of the screen if it /was/
there, instead of centering it -- if smooth scrolling is on, that is.
This supplements the fix for https://savannah.gnu.org/bugs/?50933.
Things have morphed over time and display_buffer() no longer actually
displays the buffer -- it just displays the title bar, precalculates
the multiline color info, and schedules a refresh of the edit window.
Allow the user to search in a help text with ^W and M-W.
Achieve this by not writing the help text directly to the screen
but first writing it to a temporary file and then opening this file
in a new buffer, and treating it specially: the normal file-reading
feedback is suppressed, the titlebar shows the headline of the text,
the cursor is hidden, and the menu is limited to just the up and down
movements and searching.
This fulfills https://savannah.gnu.org/bugs/?28994.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Call something a buffer when it refers to a linked list of linestructs,
and call something a linestruct when it is a struct that describes a
single line.
The interval 2013-2017 for the Free Software Foundation is valid
because in those years there were releases with changes by either
Chris or David, and the GNU maintainers guide advises to mention
a new year in all files of a package, not just in the ones that
actually changed, and be done with it for the rest of the year.
On some terminal emulators, Ctrl+Home and Ctrl+End produce special
keycodes, distinct from plain Home and End. Make the users of those
emulators (and of the Linux console) glad by making ^Home and ^End
do the obvious thing, and the combinations with Shift too.
If the number of columns in the edit window changes (which currently
only happens in two places: in regenerate_screen(), called when the
window is resized; and in main(), when line numbering mode is toggled),
the display will break if we're in softwrap mode and firstcolumn is
nonzero. This is because the column width of softwrapped chunks has
changed, and firstcolumn is no longer the starting column of a chunk,
an assumption that all code using firstcolumn relies on.
To fix this problem, add a new function, ensure_firstcolumn_is_aligned(),
to adjust firstcolumn to the starting column of the chunk it's on, and
use it when the number of columns in the edit window changes.
(Note that this function uses the simplest possible fix, and could
probably be made more sophisticated.)
Now that we can add text to the bottom right corner of the screen
without scrolling the full line onscreen, do_output() needs to refresh
the screen in that case, since it would put the cursor offscreen
otherwise. Accomplish this by borrowing logic from do_right().
We want to be able to scroll the line at edittop partially off the
screen. For this to be possible, the new variable firstcolumn stores
the starting column of the viewport -- the starting column in the line
that edittop points to.
Since firstcolumn is used by go_back_chunks() and go_forward_chunks(),
it can't be completely #ifdefed out when NANO_TINY is set, but outside
of softwrap mode it should always be zero.
Currently firstcolumn is initialized to zero, reset to zero when
toggling softwrap mode off, and reset to zero when switching buffers
while softwrap mode is off. It's otherwise unused, but its uses are
forthcoming.
Since all lines can be partially scrolled off the screen now
(except for the top line of the edit window, which is forthcoming),
ensure_line_is_visible() is no longer needed.
Use go_back_chunks() and go_forward_chunks() to move from the row
current_y is on to the row mouse_row is on. Now softwrap mode and
non-softwrap mode will behave the same way when we can scroll edittop
partially off the screen, which is forthcoming. Accordingly, remove
the call to ensure_line_is_visible(), as it no longer applies.
The old code did work, but it behaved differently between softwrap mode
(which counted down from edittop) and non-softwrap mode (which counted
up or down from current_y to take less time, and used a double loop to
keep current from going to NULL).
The new code counts up or down from current_y in both softwrap mode and
non-softwrap mode. In non-softwrap mode, it also avoids the double loop,
since go_back_chunks() and go_forward_chunks() keep the filestructs they
operate on from going to NULL.
Add its explanation as a separate paragraph.
Also: improve the argument of the --syntax option, as this is a <name>
and not merely a bundle of characters like the other <str> arguments.
The previous code only directly refreshed the screen when the margin
changed due to toggling line numbering on. When the margin changed
due to toggling it off, it would indirectly refresh via do_toggle().
When replacements are made, nothing needs to be reset any more
(it was done insufficiently anyway). Just make sure the screen
is refreshed when all is done -- this may be superfluous when
doing interactive replacements, but not when replacing all.
The setting of current_y in copy_from_filestruct() also appears to be
a holdover from the days of a more-common STATIONARY scrolling mode.
do_cut_text() uses the above function when copying text (uncutting
text again right after cutting it). Since the text is effectively
the same afterward, current_y doesn't need to change.
do_uncut_text(), however, does need current_y up to date in one case:
when uncutting a full screen or less' worth of lines, focusing will be
FALSE, and it uses edit_refresh(), so it will use STATIONARY scrolling
mode then. Take a cue from do_insertfile() and call reset_cursor() to
get an updated current_y.
(Note that the check for a full screen or less' worth of lines uses
incorrect values when in softwrap mode, but that's a separate problem.)
undo_cut(), do_redo(), and backup_lines() do not need set current_y
because they all result in edit_refresh() with focusing = TRUE, so
they do a CENTERING scroll which does not need current_y.
Since do_mouse() uses edit_redraw(), openfile->current_y will be
immediately recalculated, so there's no point in changing it now.
Use a temporary variable instead.
The value of sameline doesn't change, so it can be initialized to that.
Since i holds openfile->current_y, it should be ssize_t, not size_t.
And it's better to do the most significant part of a calculation first.
This disallows entering a verbatim ^J (0x0A) when typing text or
search terms, and disallows a verbatim ^@ (0x00) when typing a
filename. Nano beeps when the disallowed code is attempted.
This addresses https://savannah.gnu.org/bugs/?49897.
In path names and file names, 0x0A means an embedded newline and
should be shown as ^J, but in anything related to the file's data,
0x0A is an encoded NUL and should be displayed as ^@.
So... switch mode at the two main entry points into the "file system"
(reading in a file, and writing out a file), and also when drawing the
titlebar. Switch back to the default mode in the main loop.
This fixes https://savannah.gnu.org/bugs/?49893.
Most full paths are needed only temporarily and will be freed within
milliseconds. Only 'full_operating_dir' and 'backup_dir' continue to
exist for the whole current session. Any partition, too, will soon be
unpartitioned, so the extra reallocation is just a waste of time.
When wanting to debug something, it is far more useful
to temporarily insert lines like:
statusline(ALERT, "name = %i", variable);
It provides instant feedback, and it slows things down,
so you can kind of see what happens.
(The variable 'pletion_line' is not conditionalized with this option, as
it would become messy. The compiler will probably be able to elide it.)
When using --enable-tiny, it is not possible to use --enable-wordcomp,
because the word completion function uses the undo system.
Executing the 'complete_a_word' function will search from the start
of the current buffer for entire words that begin with the fragment
that is before the cursor, and will complete this fragment to the
first word that is found. Each consecutive call of 'complete_a_word'
will search for the next matching word and will complete the fragment
to that. By default the function is bound to the ^] keystroke.
Signed-off-by: Sumedh Pendurkar <sumedh.pendurkar@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Achieve this by reusing the code that gives feedback when trying to
save a buffer while using --tempfile and the file has no name yet.
This fixes https://savannah.gnu.org/bugs/?48622.
When giving a line number on the command line, do_gotolinecolumn() needs
to know the width of the screen to be able to (roughly) place the target
line in the center of the screen.
This fixes https://savannah.gnu.org/bugs/?49462.
It does not update anything -- it just picks a new point from
where to start displaying the buffer. All actual updating of
the screen is done by edit_refresh() and edit_redraw() and such.
It can be activated with --linenumbers on the command line or with
'set linenumbers' in a nanorc file, and it can be toggled with M-#.
Signed-off-by: Faissal Bensefia <faissaloo@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Benno Schulenberg