When replacements are made, nothing needs to be reset any more
(it was done insufficiently anyway). Just make sure the screen
is refreshed when all is done -- this may be superfluous when
doing interactive replacements, but not when replacing all.
This disallows entering a verbatim ^J (0x0A) when typing text or
search terms, and disallows a verbatim ^@ (0x00) when typing a
filename. Nano beeps when the disallowed code is attempted.
This addresses https://savannah.gnu.org/bugs/?49897.
In path names and file names, 0x0A means an embedded newline and
should be shown as ^J, but in anything related to the file's data,
0x0A is an encoded NUL and should be displayed as ^@.
So... switch mode at the two main entry points into the "file system"
(reading in a file, and writing out a file), and also when drawing the
titlebar. Switch back to the default mode in the main loop.
This fixes https://savannah.gnu.org/bugs/?49893.
The byte 0x0A means 0x00 *only* when it is found in nano's internal
representation of a file's data, not when it occurs in a file name.
This fixes the second part of https://savannah.gnu.org/bugs/?49867.
The fsfromline() function is mostly used by the undo functions, which
are not present in the tiny version. It is also used by the comment/
uncomment feature, but this feature cannot be enabled when --enable-tiny
is in effect.
Convert digits() to take a ssize_t instead of an int, since it's
used on ssize_t line numbers. And properly use the long modifier
when displaying a line number.
Also, conditionalize the digits() prototype.
(The variable 'pletion_line' is not conditionalized with this option, as
it would become messy. The compiler will probably be able to elide it.)
When using --enable-tiny, it is not possible to use --enable-wordcomp,
because the word completion function uses the undo system.
Executing the 'complete_a_word' function will search from the start
of the current buffer for entire words that begin with the fragment
that is before the cursor, and will complete this fragment to the
first word that is found. Each consecutive call of 'complete_a_word'
will search for the next matching word and will complete the fragment
to that. By default the function is bound to the ^] keystroke.
Signed-off-by: Sumedh Pendurkar <sumedh.pendurkar@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Achieve this by reusing the code that gives feedback when trying to
save a buffer while using --tempfile and the file has no name yet.
This fixes https://savannah.gnu.org/bugs/?48622.
It does not update anything -- it just picks a new point from
where to start displaying the buffer. All actual updating of
the screen is done by edit_refresh() and edit_redraw() and such.
It can be activated with --linenumbers on the command line or with
'set linenumbers' in a nanorc file, and it can be toggled with M-#.
Signed-off-by: Faissal Bensefia <faissaloo@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Add the keycodes and routines to allow the user to forego setting the
mark explicitly (with M-A / ^6) and instead quickly select a few words
or lines by holding down Shift together with the movement keys.
(Some combinations with Shift are swallowed by some terminal emulators.
To work around some of those, the combinations Shift+Alt+Left/Right work
as Shift+Home/End and Shift+Alt+Up/Down work as Shift+PageUp/PageDown.)
For horizontal scrolling, it is not the /desired/ column position that
is relevant for determining whether a line needs to be redrawn after a
cursor movement, but the /actual/ column positions before and after.
This fixes https://savannah.gnu.org/bugs/?48627,
and fixes https://savannah.gnu.org/bugs/?48629.
Leave the rest of any escape sequence to be processed normally, which
should be possible because those characters are all in ASCII range.
This fixes https://savannah.gnu.org/bugs/?48318.
And hard-bind the keys Ctrl+Up and Ctrl+Down to these functions.
Unlike the paragraph-jumping code, these new functions disregard
any indentation, treating only blank lines as separators. They
also do an automatic smart home when that option is set.
This fulfills https://savannah.gnu.org/bugs/?48291.
This allows the user to specify which other characters, besides the
default alphanumeric ones, should be considered as part of a word, so
that word operations like Ctrl+Left and Ctrl+Right will pass them by.
Using this option overrides the option --wordbounds.
This fulfills https://savannah.gnu.org/bugs/?47283.
When we get a ^J as verbatim input, it is not possible to include it
into the file buffer or the prompt answer, because this would mean
adding an encoded null to the buffer or answer, and that is not what
the user intended. One option would have been to simply ignore a ^J
in verbatim input. But the choice has been made to act the same way
as when the ^J (0x0A) is found in the file data: start a new line.
That is the same response as to the Enter key, yes -- but the code
for the Enter key is ^M (0x0D), not ^J. So, to be more precise,
rename the relevant variable from 'got_enter' to 'got_newline'.
By moving the test for the only situation where do_comment() does nothing
(when only the magic line is selected) further up front, the add_undo()
can be called before the commenting/uncommenting starts and two variables
and an extra function are made unnecessary.
Store the file sizes from before and after the commenting/uncommenting
in the undo struct, so they can be restored when undoing or redoing.
This fixes https://savannah.gnu.org/bugs/?48062.
Signed-off-by: Mike Scalora <mike@scalora.org>
This allows for commenting or uncommenting a line or a bunch of lines
with a single keystroke (default binding: M-3). The characters used
for commenting/uncommenting are specified by the active syntax file.
Reviewed-by: Benno Schulenberg <bensberg@justemail.net>
Signed-off-by: Mike Scalora <mike@scalora.org>
Error messages about lock files should not get overwritten by purely
informational messages, only by alerting ones.
This fixes https://savannah.gnu.org/bugs/?47963.
If during startup there are multiple error messages, currently only the
last one remains and can be read. To improve on that, introduce a short
pause between error messages -- even if it's not enough to read them all,
at least the user will be aware that there are multiple ones.
This also causes a few error messages to beep that currently don't beep,
such as when a file is unwritable.
When verifying that a match is a separate word (during spell checking),
instead of first copying out the word, then passing the word, and then
measuring its length, just pass its length straigtaway.
When we're spell checking, we don't need a special mechanism to detect
we have come full circle: reaching the end-of-buffer means we're done.
So don't bother to reset came_full_circle when we're spell checking
(when begin == NULL) but simply ignore its value.
Add a global variable, 'present_path', so that 'cwd_tab_completion()'
knows where the user is in the browser, so that it can try completions
against names in that directory instead of always against names in the
current working directory (where nano was invoked).
This fixes https://savannah.gnu.org/bugs/?47234.
Signed-off-by: Rishabh Dave <rishabhddave@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
For a little contrast with the function edit_refresh() -- it's
annoying that when you search for the latter you get to see all
the settings of the flag too.
Commit 36ec76a made the wrong change: after a tab that did not list any
file names on the screen, a refresh /is/ needed, because a previous tab
might have listed things on the screen. But at the end of the prompt,
it is not necessary to refresh the edit window if things were listed,
because the window will be refreshed anyway after reading in a file.
This is a remnant from 2001, when things were different. Now, there
is no need to refresh the edit window when tabbing produced no list.
When it did produce a list, it is cleared off later.
Instead of saving the current value of placewewant, then setting the
new value, and then passing the old value to edit_redraw() in seven
different places, just let edit_redraw() do this saving and setting.
In the bargain placewewant is now only recalculated when it matters
-- when allow_update is TRUE -- and not when it's superfluous.
SVN revision 5748 could cause some 'else's to be orphaned.
This fixes https://savannah.gnu.org/bugs/?47610.
Reported-by: Thomas Rosenau <thomasr@fantasymail.de>
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
that is taking too long. This fixes Savannah bug #47439.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5776 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
a leading underscore as the only difference is not enough.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5726 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
the first element, and the insertion of a new element) directly.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5678 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
(Note that openfile cannot be NULL here. And in case it is,
nano should crash because DEBUG is enabled.)
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5658 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
history. This fixes Savannah bug #47124 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5653 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
because 'allow_cntrls == FALSE' meant that controls were being filtered.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5644 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This fixes Savannah bug #46904 reported by Mike Frysinger.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5567 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
routine isn't getting something from somewhere but just converting it.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5503 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
And making the checking for an impatient user into a separate routine.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5501 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
not just for the first. This fixes Savannah bug #46511.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5500 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
ncurses for the keycodes. This addresses Debian bug #800681.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5434 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
This now mirrors unlink_opennode() and delete_opennode().
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5433 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
more symmetrical: wrapped in add_undo() + update_undo() where needed.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5390 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
writing out the file immediately, without prompting.
Patch by David Lawrence Ramsey.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5378 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
nor bothering with a separate initialization function when it's used only once.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5365 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
has not been built in, since the default values are quite usable.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5348 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
from the cursor to the preceding or succeeding word start.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5334 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
first asking for its name. Patch was suggested by Seiya Nuta.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5318 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
happens but only when checking for keyboard input. It now reports the
SIGWINCH via a special key value to the calling routine, to allow not
only the main editor but also the help viewer and the file browser to
adapt their display to the new size.
Patch by Mahyar Abbaspour, somewhat edited by Benno.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5228 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
before finding a unused filename takes an annoying amount of time.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5225 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
because the first sounds too much like "found_whole" to me.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5216 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
And condensing the renamed function, and making it void because
the result isn't used anyway.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5187 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
instead of at the bottom or top, to show it in context.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5170 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
switch_to_prevnext_buffer() to support message passthrough
when trying to lock files using multibuffer.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5105 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
* New formatter code to support syntaxes like
go which have tools to automatically lint and reformat the text for
you (gofmt), which is lovely. rcfile option formatter, function
text.c:do_formatter() and some other calls.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5100 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
And starting to use this to make the code a bit cleaner.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5050 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
confusion with CUT_TO_END, which is about end-of-line.
Patch by Mark Majeres.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5041 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
having them declared everywhere and passing them around endlessly.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@5039 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
And undoing line wraps together with their causal text additions, and not as
separate actions because the user did not make them.
Patch by Mark Majeres.
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4945 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
and handling multibyte characters correctly.
*Patch by Mark Majeres.*
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4908 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
pastes. This fixes many undo problems and Savannah bug #25585.
*Patch by Mark Majeres.*
git-svn-id: svn://svn.savannah.gnu.org/nano/trunk/nano@4893 35c25a1d-7b9e-4130-9fde-d3aeb78583b8
David Lawrence Ramsey