# Traditional Chinese Translation for the nano editor.
# Copyright (C) 2004, 05, 13, 18, 19, 21 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# Wei-Lun Chao <bluebat@member.fsf.org>, 2004, 2005, 2013.
# Yi-Jyun Pan <pan93412@gmail.com>, 2018, 2019, 2020, 2021.
msgid ""
msgstr ""
"Project-Id-Version: GNU nano 5.9-pre1\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2021-10-06 10:50+0200\n"
"PO-Revision-Date: 2021-09-22 22:04+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 3.0\n"

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:190 src/browser.c:197
msgid "(dir)"
msgstr "(目錄)"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:194
msgid "(parent dir)"
msgstr "(上層目錄)"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:224
msgid "(huge)"
msgstr "(huge)"

#: src/browser.c:287 src/browser.c:292 src/search.c:254
msgid "Search Wrapped"
msgstr "已從頭開始搜尋"

#: src/browser.c:303 src/search.c:432
msgid "This is the only occurrence"
msgstr "這是唯一出現之處"

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:342 src/search.c:97
msgid "Search"
msgstr "搜尋"

#. TRANSLATORS: A modifier of the Search prompt.
#: src/browser.c:344 src/search.c:101
msgid " [Backwards]"
msgstr " [往後搜尋]"

#: src/browser.c:350 src/browser.c:603 src/files.c:1178 src/files.c:2160
#: src/nano.c:309 src/search.c:111 src/search.c:289 src/search.c:714
#: src/search.c:761 src/text.c:2565 src/text.c:2761
msgid "Cancelled"
msgstr "已取消"

#: src/browser.c:377 src/search.c:367
msgid "No current search pattern"
msgstr "無符合搜尋樣式之結果"

#: src/browser.c:432
#, c-format
msgid "Cannot open directory: %s"
msgstr "無法開啟目錄：%s"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:602
msgid "Go To Directory"
msgstr "前往目錄"

#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:620 src/browser.c:651
#, c-format
msgid "Can't go outside of %s"
msgstr "不可超出 %s 範圍"

#: src/browser.c:642
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"

#: src/browser.c:657 src/files.c:892 src/files.c:898 src/files.c:1816
#: src/files.c:1831 src/history.c:292 src/history.c:320 src/history.c:390
#: src/history.c:448 src/rcfile.c:919 src/rcfile.c:1660
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤：%s"

#: src/browser.c:730
msgid "The working directory has disappeared"
msgstr "目前的工作目錄已經消失"

#: src/color.c:150
#, c-format
msgid "Unknown syntax name: %s"
msgstr "語法名稱未知：%s"

#: src/color.c:190
#, c-format
msgid "magic_load() failed: %s"
msgstr "magic_load() 錯誤：%s"

#: src/color.c:194
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr "magic_file(%s) 錯誤：%s"

#: src/cut.c:162 src/cut.c:227 src/cut.c:548
msgid "Nothing was cut"
msgstr "未剪下任何內容"

#: src/cut.c:598 src/cut.c:644
msgid "Copied nothing"
msgstr "什麼都沒複製"

#: src/cut.c:706
msgid "Cutbuffer is empty"
msgstr "剪下緩衝區為空"

#: src/files.c:129
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "刪除鎖定檔 %s 時發生錯誤：%s"

#. TRANSLATORS: Keep the next seven messages at most 76 characters.
#: src/files.c:158
msgid "Couldn't determine my identity for lock file"
msgstr "無法確定用於鎖定檔的個人身份"

#: src/files.c:163
#, c-format
msgid "Couldn't determine hostname: %s"
msgstr "無法確定主機名稱：%s"

#: src/files.c:179 src/files.c:222
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "寫入鎖定檔 %s 時發生錯誤：%s"

#: src/files.c:250
msgid "Someone else is also editing this file"
msgstr "其他人也在編輯此檔案"

#: src/files.c:259
#, c-format
msgid "Error opening lock file %s: %s"
msgstr "開啟鎖定檔 %s 時發生錯誤：%s"

#: src/files.c:274
#, c-format
msgid "Bad lock file is ignored: %s"
msgstr "忽略無效鎖定檔案：%s"

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:295
#, c-format
msgid "File %s is being edited by %s (with %s, PID %s); open anyway?"
msgstr "檔案 %s 正被 %s 編輯（使用 %s、PID %s）；仍然開啟？"

#. TRANSLATORS: Keep the next ten messages at most 76 characters.
#: src/files.c:353
#, c-format
msgid "Directory '%s' does not exist"
msgstr "目錄「%s」不存在"

#: src/files.c:355
#, c-format
msgid "Path '%s': %s"
msgstr "位置「%s」：%s"

#: src/files.c:357
#, c-format
msgid "Path '%s' is not a directory"
msgstr "「%s」不是一個目錄"

#: src/files.c:359
#, c-format
msgid "Path '%s' is not accessible"
msgstr "位置「%s」無法存取"

#: src/files.c:362
#, c-format
msgid "Directory '%s' is not writable"
msgstr "目錄「%s」唯讀"

#: src/files.c:389
#, c-format
msgid "Can't read file from outside of %s"
msgstr "無法讀取 %s 外的檔案"

#: src/files.c:399 src/rcfile.c:895
#, c-format
msgid "\"%s\" is a directory"
msgstr "「%s」為目錄"

#: src/files.c:404 src/rcfile.c:896
#, c-format
msgid "\"%s\" is a device file"
msgstr "「%s」為裝置檔案"

#: src/files.c:410
#, c-format
msgid "\"%s\" is a FIFO"
msgstr "「%s」是個 FIFO"

#: src/files.c:417
#, c-format
msgid "%s is meant to be read-only"
msgstr "%s 意指唯讀"

#. TRANSLATORS: First %s is file name, second %s is file format.
#: src/files.c:528
#, c-format
msgid "%s -- %zu line (%s)"
msgid_plural "%s -- %zu lines (%s)"
msgstr[0] "%s -- 第 %zu 列 (%s)"

#: src/files.c:530 src/files.c:536 src/global.c:1085 src/winio.c:2009
msgid "New Buffer"
msgstr "新緩衝區"

#: src/files.c:531
msgid "DOS"
msgstr "DOS"

#: src/files.c:531
msgid "Mac"
msgstr "Mac"

#: src/files.c:534
#, c-format
msgid "%s -- %zu line"
msgid_plural "%s -- %zu lines"
msgstr[0] "%s -- 第 %zu 列"

#: src/files.c:544
msgid "No more open file buffers"
msgstr "無其他已開啟檔案的緩衝區"

#: src/files.c:764 src/files.c:890 src/files.c:1870
msgid "Interrupted"
msgstr "已中止"

#: src/files.c:810
#, c-format
msgid "File '%s' is unwritable"
msgstr "檔案「%s」唯讀"

#. TRANSLATORS: Keep the next three messages at most 78 characters.
#: src/files.c:814
#, c-format
msgid "Read %zu line (Converted from Mac format)"
msgid_plural "Read %zu lines (Converted from Mac format)"
msgstr[0] "已讀取 %zu 列（轉檔自 Mac 格式）"

#: src/files.c:818
#, c-format
msgid "Read %zu line (Converted from DOS format)"
msgid_plural "Read %zu lines (Converted from DOS format)"
msgstr[0] "已讀取 %zu 列（轉檔自 DOS 格式）"

#: src/files.c:823
#, c-format
msgid "Read %zu line"
msgid_plural "Read %zu lines"
msgstr[0] "已讀取 %zu 列"

#: src/files.c:864
msgid "New File"
msgstr "新檔案"

#: src/files.c:867
#, c-format
msgid "File \"%s\" not found"
msgstr "未找到檔案「%s」"

#: src/files.c:874
msgid "Reading from FIFO..."
msgstr "正在從 FIFO 讀取…"

#: src/files.c:902
msgid "Reading..."
msgstr "讀取中…"

#: src/files.c:984 src/text.c:2307 src/text.c:2573
#, c-format
msgid "Could not create pipe: %s"
msgstr "無法建立管線：%s"

#: src/files.c:1023 src/text.c:2119 src/text.c:2387 src/text.c:2608
#, c-format
msgid "Could not fork: %s"
msgstr "無法 fork：%s"

#: src/files.c:1028
msgid "Executing..."
msgstr "執行中…"

#. TRANSLATORS: This one goes with Undid/Redid messages.
#: src/files.c:1048 src/files.c:1092
msgid "filtering"
msgstr "正在篩選"

#: src/files.c:1087
#, c-format
msgid "Failed to open pipe: %s"
msgstr "無法開啟管線：%s"

#. TRANSLATORS: The next six messages are prompts.
#: src/files.c:1134
msgid "Command to execute in new buffer"
msgstr "要在新緩衝區執行的指令"

#: src/files.c:1137
msgid "Command to execute"
msgstr "要執行的指令"

#: src/files.c:1145
#, c-format
msgid "File to read unconverted into new buffer [from %s]"
msgstr "要讀取的檔案未轉換至新的緩衝區 [來自 %s]"

#: src/files.c:1148
#, c-format
msgid "File to read into new buffer [from %s]"
msgstr "將檔案讀入新的緩衝區 [來自 %s]"

#: src/files.c:1153
#, c-format
msgid "File to insert unconverted [from %s]"
msgstr "要不轉換插入的檔案 [來自 %s]"

#: src/files.c:1156
#, c-format
msgid "File to insert [from %s]"
msgstr "要插入的檔案 [從 %s]"

#: src/files.c:1501
#, c-format
msgid "Invalid operating directory: %s\n"
msgstr "操作目錄無效：%s\n"

#: src/files.c:1550
#, c-format
msgid "Invalid backup directory: %s\n"
msgstr "備份目錄無效：%s\n"

#: src/files.c:1605
msgid "Making backup..."
msgstr "正在建立備份…"

#: src/files.c:1637
msgid "Too many existing backup files"
msgstr "現存備份檔案過多"

#: src/files.c:1682
msgid "Cannot read original file"
msgstr "無法讀取原始檔案"

#: src/files.c:1714
msgid "Cannot make regular backup"
msgstr "無法建立規律備份"

#: src/files.c:1715
msgid "Trying again in your home directory"
msgstr "請在家目錄重試一次"

#: src/files.c:1727
msgid "Cannot make backup"
msgstr "無法建立備份"

#. TRANSLATORS: Try to keep this message at most 76 characters.
#: src/files.c:1738
msgid "Cannot make backup; continue and save actual file? "
msgstr "無法建立備份；繼續並儲存實體檔案？"

#. TRANSLATORS: The %s is the reason of failure.
#: src/files.c:1743
#, c-format
msgid "Cannot make backup: %s"
msgstr "無法建立備份：%s"

#: src/files.c:1777
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"

#: src/files.c:1809 src/files.c:1872 src/files.c:1883 src/files.c:1905
#: src/files.c:1922 src/files.c:1931 src/files.c:1959 src/files.c:1970
#: src/files.c:1977 src/history.c:364 src/history.c:375 src/history.c:378
#: src/history.c:464 src/history.c:489 src/history.c:495
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/files.c:1823 src/files.c:1835 src/text.c:2490 src/text.c:2508
#: src/text.c:2909
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔時發生錯誤：%s"

#: src/files.c:1842
msgid "Writing to FIFO..."
msgstr "正在寫入 FIFO…"

#: src/files.c:1890
msgid "Writing..."
msgstr "寫入中…"

#: src/files.c:1947 src/files.c:1955
#, c-format
msgid "Error reading temp file: %s"
msgstr "讀取暫存檔時發生錯誤：%s"

#: src/files.c:2038
#, c-format
msgid "Wrote %zu line"
msgid_plural "Wrote %zu lines"
msgstr[0] "已寫入 %zu 列"

#: src/files.c:2123
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2124
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2125
msgid " [Backup]"
msgstr " [備份]"

#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2132
msgid "Prepend Selection to File"
msgstr "將選取區域複製到檔案開頭"

#: src/files.c:2133
msgid "Append Selection to File"
msgstr "將選取區域複製至檔案結尾"

#: src/files.c:2134
msgid "Write Selection to File"
msgstr "將選取區域寫入檔案"

#: src/files.c:2136
msgid "File Name to Prepend to"
msgstr "要前置內容的檔案名稱"

#: src/files.c:2137
msgid "File Name to Append to"
msgstr "要附加內容的檔案名稱"

#: src/files.c:2140
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"

#. TRANSLATORS: Concisely say the screen is too small.
#: src/files.c:2218
msgid "Too tiny"
msgstr "螢幕過小"

#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2251
msgid "File exists -- cannot overwrite"
msgstr "檔案已存在 -- 無法覆蓋"

#: src/files.c:2260
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同名稱存檔？"

#: src/files.c:2268
#, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "檔案「%s」已存在；是否覆寫？"

#: src/files.c:2292
msgid "File on disk has changed"
msgstr "磁碟上的檔案已變更"

#. TRANSLATORS: Try to keep this at most 76 characters.
#: src/files.c:2295
msgid "File was modified since you opened it; continue saving? "
msgstr "檔案在您開啟後被修改過；是否繼續儲存？ "

#: src/files.c:2671
msgid "(more)"
msgstr "(更多)"

#. TRANSLATORS: Try to keep the next two strings at most 10 characters.
#: src/global.c:559
msgid "Exit"
msgstr "退出"

#: src/global.c:560
msgid "Close"
msgstr "關閉"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:568
msgid "Cancel the current function"
msgstr "取消目前功能"

#: src/global.c:569
msgid "Display this help text"
msgstr "顯示此說明內容"

#: src/global.c:570
msgid "Close the current buffer / Exit from nano"
msgstr "關閉目前緩衝區 / 退出 nano"

#: src/global.c:572
msgid "Write the current buffer (or the marked region) to disk"
msgstr "將目前緩衝區（或已標記區域）寫入磁碟"

#: src/global.c:574
msgid "Insert another file into current buffer (or into new buffer)"
msgstr "將其他檔案插入目前緩衝區（或插入新緩衝區）"

#: src/global.c:576
msgid "Search forward for a string or a regular expression"
msgstr "使用字串或正規表示式來向前搜尋"

#: src/global.c:578
msgid "Search backward for a string or a regular expression"
msgstr "使用字串或正規表示式來向後搜尋"

#: src/global.c:580
msgid "Cut current line (or marked region) and store it in cutbuffer"
msgstr "剪下目前行（或選取區域）並在剪貼簿儲存該列"

#: src/global.c:582
msgid "Paste the contents of cutbuffer at current cursor position"
msgstr "在目前游標位置貼上剪貼簿的內容"

#: src/global.c:583
msgid "Display the position of the cursor"
msgstr "顯示游標位置"

#: src/global.c:585
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:587
msgid "Replace a string or a regular expression"
msgstr "取代字串或正規表示式"

#: src/global.c:588
msgid "Go to line and column number"
msgstr "前往指定列與行碼"

#: src/global.c:590
msgid "Mark text starting from the cursor position"
msgstr "從游標位置開始標記文字"

#: src/global.c:592
msgid "Copy current line (or marked region) and store it in cutbuffer"
msgstr "複製目前列（或選取區域）並在剪貼簿儲存該列"

#: src/global.c:593
msgid "Throw away the current line (or marked region)"
msgstr "刪除目前列（或選取區域）"

#: src/global.c:594
msgid "Indent the current line (or marked lines)"
msgstr "縮排目前列（或選取區域）"

#: src/global.c:595
msgid "Unindent the current line (or marked lines)"
msgstr "移除目前列（或選取區域）的縮排"

#: src/global.c:596
msgid "Undo the last operation"
msgstr "復原上個動作"

#: src/global.c:597
msgid "Redo the last undone operation"
msgstr "重作上一筆被復原的動作"

#: src/global.c:599
msgid "Go back one character"
msgstr "往回跳一字元"

#: src/global.c:600
msgid "Go forward one character"
msgstr "往前跳一字元"

#: src/global.c:601
msgid "Go back one word"
msgstr "往回跳一單詞"

#: src/global.c:602
msgid "Go forward one word"
msgstr "往前跳一單詞"

#: src/global.c:603
msgid "Go to previous line"
msgstr "前往上一列"

#: src/global.c:604
msgid "Go to next line"
msgstr "前往下一列"

#: src/global.c:605
msgid "Go to beginning of current line"
msgstr "前往目前列首"

#: src/global.c:606
msgid "Go to end of current line"
msgstr "前往目前列尾"

#: src/global.c:607
msgid "Go to previous block of text"
msgstr "前往前一塊文字"

#: src/global.c:608
msgid "Go to next block of text"
msgstr "前往後一塊文字"

#: src/global.c:611
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "前往目前段落開頭；而後再跳前一段落的開頭"

#: src/global.c:613
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "前往目前段落結尾；而後再跳後一段落的結尾"

#: src/global.c:615
msgid "Go one screenful up"
msgstr "向上捲動一個畫面"

#: src/global.c:616
msgid "Go one screenful down"
msgstr "向下捲動一個畫面"

#: src/global.c:617
msgid "Go to the first line of the file"
msgstr "前往檔案第一列"

#: src/global.c:618
msgid "Go to the last line of the file"
msgstr "前往檔案最後一列"

#: src/global.c:620
msgid "Go to the matching bracket"
msgstr "前往對應的括號"

#: src/global.c:624
msgid "Scroll up one line without moving the cursor textually"
msgstr "向上捲動一列而不捲動文字上的游標"

#: src/global.c:626
msgid "Scroll down one line without moving the cursor textually"
msgstr "向下捲動一列而不捲動文字上的游標"

#: src/global.c:627
msgid "Center the line where the cursor is"
msgstr "置中游標所處列"

#: src/global.c:630
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"

#: src/global.c:631
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"

#: src/global.c:633
msgid "Insert the next keystroke verbatim"
msgstr "插入下個按鍵的原形"

#: src/global.c:634
msgid "Insert a tab at the cursor position"
msgstr "在游標位置插入定位字元 (Tab)"

#: src/global.c:635
msgid "Insert a newline at the cursor position"
msgstr "在游標位置插入換列符號"

#: src/global.c:636
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"

#: src/global.c:638
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"

#: src/global.c:641
msgid "Delete backward from cursor to word start"
msgstr "刪除游標之前到單字開頭的內容"

#: src/global.c:643
msgid "Delete forward from cursor to next word start"
msgstr "刪除游標之後到下個單字開頭的內容"

#: src/global.c:645
msgid "Cut from the cursor position to the end of the file"
msgstr "剪下游標位置至檔案結尾的內容"

#: src/global.c:648
msgid "Justify the current paragraph"
msgstr "對齊目前段落"

#: src/global.c:649
msgid "Justify the entire file"
msgstr "對齊整個檔案"

#: src/global.c:653
msgid "Count the number of words, lines, and characters"
msgstr "計算字數、列數與字元數"

#: src/global.c:655
msgid "Refresh (redraw) the current screen"
msgstr "重新繪製目前畫面"

#: src/global.c:656
msgid "Suspend the editor (if suspension is enabled)"
msgstr "暫停編輯器（若已啟用暫停功能）"

#: src/global.c:658
msgid "Try and complete the current word"
msgstr "嘗試完成目前單字"

#: src/global.c:662
msgid "Comment/uncomment the current line (or marked lines)"
msgstr "註解或取消註解目前列（或標記列）"

#: src/global.c:664
msgid "Save file without prompting"
msgstr "儲存檔案而不經確認"

#: src/global.c:665
msgid "Search next occurrence backward"
msgstr "往回搜尋下一個結果"

#: src/global.c:666
msgid "Search next occurrence forward"
msgstr "向前搜尋下一個結果"

#: src/global.c:668
msgid "Start/stop recording a macro"
msgstr "開始 / 停止錄製巨集"

#: src/global.c:669
msgid "Run the last recorded macro"
msgstr "執行上次錄製的巨集"

#: src/global.c:670
msgid "Place or remove an anchor at the current line"
msgstr "在目前的列放置或移除錨點。"

#: src/global.c:671
msgid "Jump backward to the nearest anchor"
msgstr "往回跳至最近錨點"

#: src/global.c:672
msgid "Jump forward to the nearest anchor"
msgstr "往前跳至最近錨點"

#: src/global.c:674
msgid "Toggle the case sensitivity of the search"
msgstr "切換搜尋是否要符合大小寫"

#: src/global.c:675
msgid "Reverse the direction of the search"
msgstr "反轉搜尋方向"

#: src/global.c:676
msgid "Toggle the use of regular expressions"
msgstr "切換是否使用正規表示式"

#: src/global.c:678
msgid "Recall the previous search/replace string"
msgstr "重用上次搜尋 / 取代字串"

#: src/global.c:679
msgid "Recall the next search/replace string"
msgstr "重用下次搜尋 / 取代字串"

#: src/global.c:682
msgid "Toggle the use of DOS format"
msgstr "切換是否使用 DOS 格式"

#: src/global.c:683
msgid "Toggle the use of Mac format"
msgstr "切換是否使用 Mac 格式"

#: src/global.c:684
msgid "Toggle appending"
msgstr "切換是否附加"

#: src/global.c:685
msgid "Toggle prepending"
msgstr "切換是否前置"

#: src/global.c:686
msgid "Toggle backing up of the original file"
msgstr "切換是否備份既有檔案"

#: src/global.c:687
msgid "Execute a function or an external command"
msgstr "執行函式或外部命令"

#: src/global.c:689
msgid "Pipe the current buffer (or marked region) to the command"
msgstr "將目前緩衝區（或已標記區域）透過管線傳入指令"

#: src/global.c:690
msgid "Do not convert from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"

#: src/global.c:693
msgid "Toggle the use of a new buffer"
msgstr "切換是否使用新緩衝區"

#: src/global.c:695
msgid "Close buffer without saving it"
msgstr "關閉緩衝區而不儲存"

#: src/global.c:697
msgid "Go to file browser"
msgstr "開啟檔案瀏覽器"

#: src/global.c:698
msgid "Exit from the file browser"
msgstr "退出檔案瀏覽器"

#: src/global.c:699
msgid "Go to the first file in the list"
msgstr "前往列表中第一個檔案"

#: src/global.c:700
msgid "Go to the last file in the list"
msgstr "前往列表中最後一個檔案"

#: src/global.c:701
msgid "Go to the previous file in the list"
msgstr "前往列表中上一個檔案"

#: src/global.c:702
msgid "Go to the next file in the list"
msgstr "前往列表中下一個檔案"

#: src/global.c:704
msgid "Go to lefthand column"
msgstr "前往左欄"

#: src/global.c:705
msgid "Go to righthand column"
msgstr "前往右欄"

#: src/global.c:706
msgid "Go to first row in this column"
msgstr "前往此欄第一列"

#: src/global.c:707
msgid "Go to last row in this column"
msgstr "前往此欄最後一列"

#: src/global.c:709
msgid "Search forward for a string"
msgstr "向前搜尋一個字串"

#: src/global.c:710
msgid "Search backward for a string"
msgstr "向後搜尋一個字串"

#: src/global.c:711
msgid "Refresh the file list"
msgstr "重新整理檔案列表"

#: src/global.c:712
msgid "Go to directory"
msgstr "前往目錄"

#: src/global.c:715
msgid "Invoke the linter, if available"
msgstr "嘗試呼叫 linter。"

#: src/global.c:716
msgid "Go to previous linter msg"
msgstr "前往上一個 linter 訊息"

#: src/global.c:717
msgid "Go to next linter msg"
msgstr "前往下一個 linter 訊息"

#: src/global.c:719
msgid "Invoke a program to format/arrange/manipulate the buffer"
msgstr "呼叫應用程式來格式化、排列及操縱緩衝區"

#. TRANSLATORS: Try to keep the next thirteen strings at most 10 characters.
#: src/global.c:733
msgid "Help"
msgstr "說明"

#: src/global.c:737 src/prompt.c:691
msgid "Cancel"
msgstr "取消"

#: src/global.c:759
msgid "Write Out"
msgstr "儲存"

#: src/global.c:767
msgid "Read File"
msgstr "讀取"

#: src/global.c:774 src/global.c:813
msgid "Justify"
msgstr "對齊"

#: src/global.c:780 src/global.c:871 src/global.c:1017
msgid "Refresh"
msgstr "重整"

#: src/global.c:785 src/global.c:874
msgid "Where Is"
msgstr "搜尋"

#: src/global.c:788 src/global.c:849
msgid "Replace"
msgstr "取代"

#. TRANSLATORS: This starts a backward search.
#: src/global.c:792 src/global.c:876 src/global.c:895 src/global.c:1071
msgid "Where Was"
msgstr "搜尋"

#. TRANSLATORS: This refers to searching the preceding occurrence.
#: src/global.c:795 src/global.c:879 src/global.c:899
msgid "Previous"
msgstr "上個"

#: src/global.c:797 src/global.c:881 src/global.c:901
msgid "Next"
msgstr "下個"

#: src/global.c:801
msgid "Cut"
msgstr "剪下"

#: src/global.c:804
msgid "Paste"
msgstr "貼上"

#: src/global.c:809
msgid "Execute"
msgstr "執行"

#. TRANSLATORS: This refers to the position of the cursor.
#: src/global.c:819
msgid "Location"
msgstr "位置"

#: src/global.c:825 src/global.c:862 src/global.c:972
msgid "Go To Line"
msgstr "跳列"

#. TRANSLATORS: Try to keep the next ten strings at most 12 characters.
#: src/global.c:831
msgid "Undo"
msgstr "復原"

#: src/global.c:833
msgid "Redo"
msgstr "重做"

#: src/global.c:836
msgid "Set Mark"
msgstr "設定標記"

#: src/global.c:838
msgid "Copy"
msgstr "複製"

#: src/global.c:842
msgid "Case Sens"
msgstr "區分大小寫"

#: src/global.c:844
msgid "Reg.exp."
msgstr "正規表示式"

#: src/global.c:846
msgid "Backwards"
msgstr "往回搜尋"

#: src/global.c:851
msgid "No Replace"
msgstr "不取代"

#: src/global.c:855
msgid "Older"
msgstr "較舊"

#: src/global.c:857
msgid "Newer"
msgstr "較新"

#. TRANSLATORS: Try to keep the next seven strings at most 10 characters.
#: src/global.c:868
msgid "Go To Dir"
msgstr "前往目錄"

#: src/global.c:891
msgid "To Bracket"
msgstr "至 Bracket"

#. TRANSLATORS: This means move the cursor one character back.
#: src/global.c:906 src/global.c:911
msgid "Back"
msgstr "往回"

#: src/global.c:908 src/global.c:913
msgid "Forward"
msgstr "向前"

#. TRANSLATORS: Try to keep the next ten strings at most 12 characters.
#: src/global.c:919
msgid "Prev Word"
msgstr "前一個字"

#: src/global.c:921
msgid "Next Word"
msgstr "後一個字"

#: src/global.c:925
msgid "Home"
msgstr "頂端"

#: src/global.c:927
msgid "End"
msgstr "尾端"

#: src/global.c:930
msgid "Prev Line"
msgstr "上列"

#: src/global.c:932
msgid "Next Line"
msgstr "下列"

#: src/global.c:935
msgid "Scroll Up"
msgstr "向上捲動"

#: src/global.c:937
msgid "Scroll Down"
msgstr "向下捲動"

#: src/global.c:941
msgid "Prev Block"
msgstr "前一個區塊"

#: src/global.c:943
msgid "Next Block"
msgstr "後一個區塊"

#. TRANSLATORS: Try to keep these two strings at most 16 characters.
#: src/global.c:947
msgid "Begin of Paragr."
msgstr "段落開頭"

#: src/global.c:949
msgid "End of Paragraph"
msgstr "段落結尾"

#. TRANSLATORS: Try to keep the next six strings at most 12 characters.
#: src/global.c:954 src/global.c:1157
msgid "Prev Page"
msgstr "上頁"

#: src/global.c:956 src/global.c:1159
msgid "Next Page"
msgstr "下頁"

#: src/global.c:959
msgid "First Line"
msgstr "首列"

#: src/global.c:961
msgid "Last Line"
msgstr "尾列"

#: src/global.c:965
msgid "Prev File"
msgstr "上個檔案"

#: src/global.c:967
msgid "Next File"
msgstr "下個檔案"

#. TRANSLATORS: The next four strings are names of keyboard keys.
#: src/global.c:977
msgid "Tab"
msgstr "定位鍵 (Tab)"

#: src/global.c:979
msgid "Enter"
msgstr "Enter 鍵"

#: src/global.c:982
msgid "Backspace"
msgstr "Backspace 鍵"

#: src/global.c:984
msgid "Delete"
msgstr "刪除鍵"

#. TRANSLATORS: The next two strings refer to deleting words.
#: src/global.c:995
msgid "Chop Left"
msgstr "裁斷左側內容"

#: src/global.c:997
msgid "Chop Right"
msgstr "裁斷右側內容"

#: src/global.c:999 src/global.c:1142
msgid "Cut Till End"
msgstr "剪下至末端"

#: src/global.c:1004 src/global.c:1101
msgid "Full Justify"
msgstr "完全對齊"

#: src/global.c:1009
msgid "Word Count"
msgstr "字數統計"

#: src/global.c:1013
msgid "Verbatim"
msgstr "原形"

#: src/global.c:1021 src/global.c:1145
msgid "Suspend"
msgstr "暫停"

#: src/global.c:1025
msgid "Indent"
msgstr "縮排"

#: src/global.c:1027
msgid "Unindent"
msgstr "移除縮排"

#: src/global.c:1031
msgid "Comment Lines"
msgstr "註解該列"

#: src/global.c:1035
msgid "Complete"
msgstr "完成"

#: src/global.c:1040
msgid "Record"
msgstr "錄製"

#: src/global.c:1042
msgid "Run Macro"
msgstr "執行巨集"

#: src/global.c:1045
msgid "Anchor"
msgstr "錨點"

#: src/global.c:1047
msgid "Up to anchor"
msgstr "前往上個錨點"

#: src/global.c:1049
msgid "Down to anchor"
msgstr "前往下個錨點"

#. TRANSLATORS: This *deletes* a line or marked region.
#: src/global.c:1053
msgid "Zap"
msgstr "Zap"

#: src/global.c:1058 src/global.c:1093
msgid "Spell Check"
msgstr "拼字檢查"

#: src/global.c:1062 src/global.c:1097
msgid "Linter"
msgstr "Linter"

#: src/global.c:1064 src/global.c:1105
msgid "Formatter"
msgstr "程式碼格式化工具"

#: src/global.c:1076
msgid "Center"
msgstr "置中"

#: src/global.c:1079
msgid "Save"
msgstr "儲存"

#: src/global.c:1089
msgid "Pipe Text"
msgstr "將文字傳入管線"

#: src/global.c:1110
msgid "Go To Text"
msgstr "前往文字"

#: src/global.c:1115
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:1117
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:1125
msgid "Append"
msgstr "附加"

#: src/global.c:1127
msgid "Prepend"
msgstr "前置"

#: src/global.c:1130
msgid "Backup File"
msgstr "備份檔案"

#: src/global.c:1134
msgid "No Conversion"
msgstr "未轉換"

#: src/global.c:1139
msgid "Execute Command"
msgstr "執行指令"

#. TRANSLATORS: This invokes the file browser.
#: src/global.c:1154
msgid "Browse"
msgstr "瀏覽"

#: src/global.c:1162
msgid "First File"
msgstr "第一個檔案"

#: src/global.c:1164
msgid "Last File"
msgstr "最後一個檔案"

#: src/global.c:1168
msgid "Left Column"
msgstr "左欄"

#: src/global.c:1170
msgid "Right Column"
msgstr "右欄"

#: src/global.c:1172
msgid "Top Row"
msgstr "上排"

#: src/global.c:1174
msgid "Bottom Row"
msgstr "下排"

#: src/global.c:1179
msgid "Discard buffer"
msgstr "放棄緩衝區"

#. TRANSLATORS: The next two strings may be up to 37 characters each.
#: src/global.c:1184
msgid "Previous Linter message"
msgstr "上一則 Linter 訊息"

#: src/global.c:1186
msgid "Next Linter message"
msgstr "下一則 Linter 訊息"

#. TRANSLATORS: The next thirteen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1540
msgid "Help mode"
msgstr "說明模式"

#: src/global.c:1542
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"

#: src/global.c:1544
msgid "Soft wrapping of overlong lines"
msgstr "虛擬換過長列"

#: src/global.c:1546
msgid "Whitespace display"
msgstr "顯示空格"

#: src/global.c:1548
msgid "Color syntax highlighting"
msgstr "語法色彩標示"

#: src/global.c:1550
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"

#: src/global.c:1552
msgid "Auto indent"
msgstr "自動縮排"

#: src/global.c:1554
msgid "Cut to end"
msgstr "剪至列尾"

#: src/global.c:1556
msgid "Hard wrapping of overlong lines"
msgstr "實際換過長列"

#: src/global.c:1558
msgid "Conversion of typed tabs to spaces"
msgstr "已將輸入的 Tab 轉換成空白"

#: src/global.c:1560
msgid "Mouse support"
msgstr "滑鼠支援"

#: src/global.c:1562
msgid "Suspension"
msgstr "暫停"

#: src/global.c:1564
msgid "Line numbering"
msgstr "標示列碼"

#: src/help.c:54
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.  "
msgstr ""
"搜尋指令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下 Enter 鍵。如果有符合您所輸入的文"
"字，畫面就會更新到最符合搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在搜尋提示後方的括號中。不輸入任何文字而直接按下 "
"Enter 鍵則會執行前次搜尋。"

#: src/help.c:63
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選取了一段文字並進行搜尋取代，就只有在選擇文字中符合者才會被"
"替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式：\n"
"\n"

#: src/help.c:69
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"「跳列」輔助說明\n"
"\n"
" 首先輸入想前往的列碼，並按下 Enter 鍵。如果文件中的列數比您所輸入要少，則會"
"跳至檔案最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式：\n"
"\n"

#: src/help.c:78
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先輸入檔案名稱，該檔案中的內容將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區，並使用 -F、--multibuffer 指令列旗"
"標、Meta-F 開關或者 nanorc\n"
" 檔案來啟用此功能的話，所插入的檔案將會被載入到獨立的緩衝區中（可利用 Meta-< "
"和 > 在檔案緩衝區間切換）。"

#: src/help.c:87
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空緩衝區，那就不要輸入任何檔名，或是在提示文字後輸入不存在的"
"檔名後按下 Enter 鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式：\n"
"\n"

#: src/help.c:93
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file.  To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 請先輸入您想要以什麼檔名來儲存目前檔案，並按下 Enter 儲存檔案。\n"
"\n"
" 如果已經用標記功能選取文字，那麼您將被提示只將部份選擇內容儲存成一個檔案。為"
"了降低目前檔案只被其中部分覆寫的機會，在此模式下，目前的檔名不會成為預設"
"值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式：\n"
"\n"

#: src/help.c:107
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing.  You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory.  To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構，以選取要讀出或寫入的檔案。您可以\n"
" 使用上下左右鍵或上頁/下頁來瀏覽，並用 S 或 Enter 鍵來選取所要的檔案或者 進入"
"所選的目錄。要跳到上層時，選擇在檔案列表頂端名為「..」的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單：\n"
"\n"

#: src/help.c:120
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜尋指令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下 Enter 鍵 (Enter)。如果存在著\n"
" 符合您所輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。\n"
" 不輸入任何文字而直接按下 Enter 鍵則會履行前次的搜尋。\n"
"\n"

#: src/help.c:129
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於瀏覽器搜尋模式：\n"
"\n"

#: src/help.c:133
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"前往目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果未關閉 Tab 完成的功能，\n"
" 您可以利用 Tab 鍵 (嘗試) 自動完成目錄名稱。\n"
"\n"
" 以下的功能鍵可用於前往目錄模式：\n"
"\n"

#: src/help.c:146
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited.  It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。\n"
" 當遇到一個未知的字，它將被標記起來，並讓您編輯取代文字。\n"
" 對於目前檔案中每一個拼錯的字，都會顯示取代的提示；\n"
" 或者，如果已經用標記選擇了文字的話，那就只作用於選取的文字之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式：\n"
"\n"

#: src/help.c:161
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or into a new buffer).  If the command is preceded "
"by '|' (the pipe symbol), the current contents of the buffer (or marked "
"region) will be piped to the command.  "
msgstr ""
"執行指令輔助說明\n"
"\n"
" 這個模式允許您插入從 shell 執行之指令的輸出到目前的緩衝區 (或是插入到新的緩"
"衝區)。\n"
" 若在指令之前加上「|」(pipe 管線符號)，則目前緩衝區的內容（或選取區塊）將會 "
"pipe 到指令中。"

#: src/help.c:167
msgid ""
"If you just need another blank buffer, do not enter any command.\n"
"\n"
" You can also pick one of four tools, or cut a large piece of the buffer, or "
"put the editor to sleep.\n"
"\n"
msgstr ""
"如您只需要另一個空白緩衝區，請不要輸入任何命令。\n"
"\n"
" 您亦可從四個工具挑選一個，或剪下較大範圍的緩衝區，或者是讓編輯器休眠\n"
"\n"

#: src/help.c:170
msgid ""
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於執行指令模式：\n"
"\n"

#: src/help.c:173
msgid ""
"=== Linter ===\n"
"\n"
" In this mode, the status bar shows an error message or warning, and the "
"cursor is put at the corresponding position in the file.  With PageUp and "
"PageDown you can switch to earlier and later messages.\n"
"\n"
msgstr ""
"=== Linter ===\n"
"\n"
" 這個模式中，狀態列會顯示錯誤或警告訊息，且游標將會放在檔案中的對應位置。\n"
" 使用 PageUp 和 PageDown 按鈕可以切換到較新或較舊的訊息。\n"
"\n"

#: src/help.c:178
msgid ""
" The following function keys are available in Linter mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於 Linter 模式：\n"
"\n"

#: src/help.c:185
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor.  There are four main sections of the editor.  The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified.  Next is the main editor window "
"showing the file being edited.  The status line is the third line from the "
"bottom and shows important messages.  "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面模仿華盛頓大學的 Pico 文字編輯器。\n"
" 它含有四個主要部分：頂列顯示程式版本、目前被編輯的檔案名稱，以及是否這檔案已"
"經變更過。\n"
" 接著是主要編輯區，用來顯示正在編輯的檔案。狀態列位於倒數第三列，用來顯示重要"
"的訊息。"

#: src/help.c:195
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice.  Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup.  "
msgstr ""
"底部的兩列顯示編輯器中最常用到的快捷鍵。\n"
"\n"
" 快捷鍵的定義如下：控制鍵組 (Control-key) 序列是以一個帽子符號「^」表示，\n"
" 且可藉由使用 Ctrl 鍵或按兩下 Esc 鍵輸入。\n"
" Meta-Key 序列是以「M-」符號表示，\n"
" 且可以藉由您的鍵盤設定來選擇使用 Alt、Cmd 或 Esc 鍵輸入。"

#: src/help.c:202
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value.  The "
"following keystrokes are available in the main editor window.  Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 兩次 之後再輸入從 000 到 255 之間的三位數字，則會輸入該 ASCII 碼"
"對應的字元。下列按鍵組合可用於主要編輯區，替代按鍵則顯示於括弧內：\n"
"\n"

#: src/help.c:234 src/help.c:306
msgid "enable/disable"
msgstr "啟用/停用"

#: src/help.c:574 src/nano.c:1578
msgid "^W = Ctrl+W    M-W = Alt+W"
msgstr "^W = Ctrl+W    M-W = Alt+W"

#: src/history.c:266
#, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"無法建立 %s 目錄：%s\n"
"若要儲存/載入搜尋記錄或游標位置，則必須建立此目錄。\n"

#: src/history.c:273
#, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路徑 %s 不是但必須是個目錄。\n"
"Nano 將無法載入或儲存搜尋記錄或游標位置\n"

#: src/history.c:371 src/history.c:470
#, c-format
msgid "Cannot limit permissions on %s: %s"
msgstr "無法限縮 %s 的權限：%s"

#: src/nano.c:201
msgid "Key is invalid in view mode"
msgstr "在檢視模式中，此按鍵無效。"

#: src/nano.c:208
msgid "This function is disabled in restricted mode"
msgstr "這功能已在受限模式中停用"

#: src/nano.c:300
msgid "No file name"
msgstr "沒有檔案名稱"

#: src/nano.c:302
msgid "Save modified buffer? "
msgstr "儲存修改過的緩衝區？"

#: src/nano.c:327
#, c-format
msgid ""
"\n"
"Too many .save files\n"
msgstr ""
"\n"
"過多 .save 檔案\n"

#: src/nano.c:329
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"

#: src/nano.c:490
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [選項] [[+列碼[,欄碼]] 檔名]…\n"
"\n"

#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:494
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename.  The column number can be added after a comma.\n"
msgstr ""
"若要將游標放在檔案的指定行中，請在檔案名稱前加上「+列碼」。\n"
"可在「+列碼」加個逗號後加上要前往的欄碼。\n"

#: src/nano.c:496
#, c-format
msgid ""
"When a filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""
"當檔案名稱為「-」，Nano 將從標準輸入讀取資料\n"
"\n"

#. TRANSLATORS: The next three are column headers of the --help output.
#: src/nano.c:498
msgid "Option"
msgstr "選項"

#: src/nano.c:498
msgid "Long option"
msgstr "長選項"

#: src/nano.c:498
msgid "Meaning"
msgstr "意義"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:501
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵"

#: src/nano.c:503
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"

#: src/nano.c:504
msgid "-C <dir>"
msgstr "-C <目錄>"

#: src/nano.c:504
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目錄>"

#: src/nano.c:505
msgid "Directory for saving unique backup files"
msgstr "用來儲存唯一備份檔案的目錄"

#: src/nano.c:508
msgid "Use bold instead of reverse video text"
msgstr "使用粗體而非反白顯示文字"

#: src/nano.c:510
msgid "Convert typed tabs to spaces"
msgstr "將輸入的 Tab 符號轉換成空白字元"

#: src/nano.c:515
msgid "Read a file into a new buffer by default"
msgstr "預設將檔案讀取至新緩衝區"

#: src/nano.c:518
msgid "Use (vim-style) lock files"
msgstr "使用（vim 形式的）鎖定檔案"

#: src/nano.c:523
msgid "Save & reload old search/replace strings"
msgstr "儲存並重新載入先前的搜尋及取代字串"

#: src/nano.c:526
msgid "Don't look at nanorc files"
msgstr "請勿讀取 nanorc 檔案"

#: src/nano.c:529
msgid "-J <number>"
msgstr "-J <數字>"

#: src/nano.c:529
msgid "--guidestripe=<number>"
msgstr "--guidestripe=<數字>"

#: src/nano.c:530
msgid "Show a guiding bar at this column"
msgstr "在此欄顯示指引欄"

#: src/nano.c:533
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字按鍵區混淆的問題"

#: src/nano.c:536
msgid "Don't add an automatic newline"
msgstr "不加上自動換列"

#: src/nano.c:540
msgid "Trim tail spaces when hard-wrapping"
msgstr "當使用實際折行時裁掉尾端空白"

#: src/nano.c:544
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"

#: src/nano.c:546
msgid "Leading whitespace means new paragraph"
msgstr "前置空白意指新段落"

#: src/nano.c:551
msgid "Save & restore position of the cursor"
msgstr "儲存並恢復游標位置"

#: src/nano.c:554
msgid "-Q <regex>"
msgstr "-Q <正規表示式>"

#: src/nano.c:554
msgid "--quotestr=<regex>"
msgstr "--quotestr=<正規表示式>"

#. TRANSLATORS: This refers to email quoting,
#. * like the > in: > quoted text.
#: src/nano.c:557
msgid "Regular expression to match quoting"
msgstr "括號中用來尋找符合文字的正規表示式"

#: src/nano.c:560
msgid "Restrict access to the filesystem"
msgstr "限制存取檔案系統"

#: src/nano.c:562
msgid "Display overlong lines on multiple rows"
msgstr "分行顯示過長的列"

#: src/nano.c:563
msgid "-T <number>"
msgstr "-T <數字>"

#: src/nano.c:563
msgid "--tabsize=<number>"
msgstr "--tabsize=<數字>"

#: src/nano.c:564
msgid "Make a tab this number of columns wide"
msgstr "將 Tab 所佔寬度設為指定數目行"

#: src/nano.c:566
msgid "Wipe status bar upon next keystroke"
msgstr "按下下個按鍵時清空狀態列"

#: src/nano.c:567
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"

#: src/nano.c:570
msgid "Detect word boundaries more accurately"
msgstr "使偵測單字邊界更準確"

#: src/nano.c:571
msgid "-X <string>"
msgstr "-X <字串>"

#: src/nano.c:571
msgid "--wordchars=<string>"
msgstr "--wordchars=<字串>"

#: src/nano.c:572
msgid "Which other characters are word parts"
msgstr "哪些其他字元是單字的一部份"

#: src/nano.c:576
msgid "-Y <name>"
msgstr "-Y <名稱>"

#: src/nano.c:576
msgid "--syntax=<name>"
msgstr "--syntax=<名稱>"

#: src/nano.c:577
msgid "Syntax definition to use for coloring"
msgstr "用於上色的語法定義"

#: src/nano.c:580
msgid "Let Bsp and Del erase a marked region"
msgstr "使用 Bsp 和 Del 清除選取區塊"

#: src/nano.c:581
msgid "When soft-wrapping, do it at whitespace"
msgstr "當使用軟換行，請在空白處進行請在空白字元所在處進行虛擬換行"

#: src/nano.c:584
msgid "Automatically hard-wrap overlong lines"
msgstr "自動實際折過長列"

#: src/nano.c:586
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"

#: src/nano.c:588
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 Backspace 和 Delete 鍵的混淆問題"

#: src/nano.c:590
msgid "Keep the line below the title bar empty"
msgstr "保留標題列下一列的空白"

#: src/nano.c:593
msgid "-f <file>"
msgstr "-f <檔案>"

#: src/nano.c:593
msgid "--rcfile=<file>"
msgstr "--rcfile=<檔案>"

#: src/nano.c:594
msgid "Use only this file for configuring nano"
msgstr "只在設定 nano 時使用此檔案"

#: src/nano.c:597
msgid "Show cursor in file browser & help text"
msgstr "在檔案瀏覽器和輔助說明中顯示游標"

#: src/nano.c:599
msgid "Show this help text and exit"
msgstr "顯示這份說明文字並退出"

#: src/nano.c:601
msgid "Automatically indent new lines"
msgstr "自動縮排新列"

#: src/nano.c:602
msgid "Scroll per half-screen, not per line"
msgstr "一次捲動半個螢幕而非一列"

#: src/nano.c:603
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"

#: src/nano.c:606
msgid "Show line numbers in front of the text"
msgstr "在文字前顯示列碼"

#: src/nano.c:609
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"

#: src/nano.c:612
msgid "Do not read the file (only write it)"
msgstr "請勿讀取此檔案（僅寫入檔案）"

#: src/nano.c:615
msgid "-o <dir>"
msgstr "-o <目錄>"

#: src/nano.c:615
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目錄>"

#: src/nano.c:616
msgid "Set operating directory"
msgstr "設定操作目錄"

#: src/nano.c:618
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"

#: src/nano.c:620
msgid "Show a position+portion indicator"
msgstr "顯示位置+部分指示器"

#: src/nano.c:623
msgid "-r <number>"
msgstr "-r <數字>"

#: src/nano.c:623
msgid "--fill=<number>"
msgstr "--fill=<數字>"

#: src/nano.c:624
msgid "Set width for hard-wrap and justify"
msgstr "設定實際折行的寬度並對齊"

#: src/nano.c:628
msgid "-s <program>"
msgstr "-s <程式>"

#: src/nano.c:628
msgid "--speller=<program>"
msgstr "--speller=<程式>"

#: src/nano.c:629
msgid "Use this alternative spell checker"
msgstr "使用此備用拼字檢查程式"

#: src/nano.c:631
msgid "Save changes on exit, don't prompt"
msgstr "結束時儲存變更而不提示"

#: src/nano.c:633
msgid "Save a file by default in Unix format"
msgstr "預設以 Unix 格式儲存檔案"

#: src/nano.c:635
msgid "View mode (read-only)"
msgstr "檢視模式（唯讀）"

#: src/nano.c:637
msgid "Don't hard-wrap long lines [default]"
msgstr "不實際折過長列 [預設]"

#: src/nano.c:639
msgid "Don't show the two help lines"
msgstr "請勿顯示兩說明列"

#: src/nano.c:641
msgid "Make Ctrl+Right stop at word ends"
msgstr "讓 Ctrl + 方向右鍵 停在單詞尾端"

#: src/nano.c:644
msgid "Enable suspension"
msgstr "開啟暫停功能"

#: src/nano.c:646
msgid "Show some states on the title bar"
msgstr "在標題列顯示些狀態"

#: src/nano.c:647
msgid "Show a feedback bar at the bottom"
msgstr "在底部顯示回饋列"

#: src/nano.c:650
msgid "Also try magic to determine syntax"
msgstr "也嘗試使用 magic 判斷語法"

#: src/nano.c:661
#, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano，版本 %s\n"

#: src/nano.c:665
#, c-format
msgid " (C) 2014-%s the contributors to nano\n"
msgstr " (C) 2014-%s Nano 貢獻者\n"

#: src/nano.c:667
#, c-format
msgid " Compiled options:"
msgstr " 編譯選項:"

#: src/nano.c:816
msgid "Could not reconnect stdin to keyboard\n"
msgstr "無法將 stdin 重新連結至鍵盤\n"

#: src/nano.c:834
#, c-format
msgid "Reading data from keyboard; type ^D or ^D^D to finish.\n"
msgstr "正在從鍵盤讀取資料；輸入 ^D 或 ^D^D 結束。\n"

#: src/nano.c:844
#, c-format
msgid "Failed to open stdin: %s"
msgstr "無法開啟標準輸入：%s"

#: src/nano.c:921
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:928
#, c-format
msgid "Sorry! Nano crashed!  Code: %d.  Please report a bug.\n"
msgstr "抱歉，Nano 當掉了！錯誤代碼：%d。請回報此臭蟲。\n"

#: src/nano.c:943
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "請使用「fg」回到 nano。\n"

#: src/nano.c:959
msgid "Suspension is not enabled"
msgstr "尚未啟用暫停功能"

#: src/nano.c:1114
msgid "enabled"
msgstr "啟用"

#: src/nano.c:1114
msgid "disabled"
msgstr "停用"

#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not recognize.
#: src/nano.c:1257
msgid "Unknown sequence"
msgstr "序列未知"

#: src/nano.c:1259
msgid "Unbound key"
msgstr "按鍵未綁定"

#: src/nano.c:1263
#, c-format
msgid "Unbindable key: M-^%c"
msgstr "按鍵未綁定：M-^%c"

#: src/nano.c:1268
#, c-format
msgid "Unbound key: Sh-M-%c"
msgstr "按鍵未綁定：Sh-M-%c"

#: src/nano.c:1271
#, c-format
msgid "Unbound key: M-%c"
msgstr "按鍵未綁定：M-%c"

#: src/nano.c:1273
msgid "Unbindable key: ^["
msgstr "無法綁定按鍵：^["

#: src/nano.c:1275
#, c-format
msgid "Unbound key: ^%c"
msgstr "按鍵未指定：^%c"

#: src/nano.c:1278
#, c-format
msgid "Unbound key: %c"
msgstr "按鍵未綁定：%c"

#: src/nano.c:1847 src/rcfile.c:1626
#, c-format
msgid "Guide column \"%s\" is invalid"
msgstr "指引欄「%s」無效"

#: src/nano.c:1894 src/rcfile.c:1631
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所請求的 Tab 寬度「%s」無效"

#: src/nano.c:1998 src/rcfile.c:1576
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所請求的填充長度「%s」無效"

#: src/nano.c:2053
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr "輸入「%s -h」顯示可用的選項列表。\n"

#: src/nano.c:2243
#, c-format
msgid "Bad quoting regex \"%s\": %s\n"
msgstr "引號中的正規表示式「%s」無效：%s\n"

#: src/nano.c:2398
#, c-format
msgid "Invalid search modifier '%c'"
msgstr "搜尋修飾符「%c」無效"

#: src/nano.c:2409
msgid "Empty search string"
msgstr "搜尋字串為空"

#: src/nano.c:2418 src/search.c:778
msgid "Invalid line or column number"
msgstr "列碼或欄碼無效"

#: src/nano.c:2480
msgid "Can open just one file\n"
msgstr "只能開啟一個檔案\n"

#: src/nano.c:2498
msgid "Welcome to nano.  For basic help, type Ctrl+G."
msgstr "歡迎使用 nano。請按 Ctrl+G 取得基本使用說明。"

#. TRANSLATORS: For the next three strings, specify the starting letters
#. * of the translations for "Yes"/"No"/"All".  The first letter of each of
#. * these strings MUST be a single-byte letter; others may be multi-byte.
#: src/prompt.c:652
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:653
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:654
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:678
msgid "Yes"
msgstr "是"

#: src/prompt.c:682
msgid "No"
msgstr "否"

#: src/prompt.c:687
msgid "All"
msgstr "全部"

#: src/rcfile.c:203
#, c-format
msgid "Mistakes in '%s'"
msgstr "「%s」中發現錯誤"

#: src/rcfile.c:207
msgid "Problems with history file"
msgstr "歷史記錄檔案出現問題"

#: src/rcfile.c:211
#, c-format
msgid "Error in %s on line %zu: "
msgstr "在 %s (位於第 %zu 列) 中發現錯誤："

#: src/rcfile.c:562
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 '%s' 有未封閉的 \""

#: src/rcfile.c:583 src/rcfile.c:594
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"

#: src/rcfile.c:599
msgid "Empty regex string"
msgstr "正規表示式字串為空"

#: src/rcfile.c:624 src/search.c:45
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "正規表示式「%s」無效: %s"

#: src/rcfile.c:644
msgid "Missing syntax name"
msgstr "遺失語法名稱"

#: src/rcfile.c:652
msgid "Unpaired quote in syntax name"
msgstr "語法名稱中發現不成對引號"

#: src/rcfile.c:664
msgid "The \"none\" syntax is reserved"
msgstr "「none」語法被保留"

#: src/rcfile.c:695
msgid "The \"default\" syntax does not accept extensions"
msgstr "「default」語法不允許副檔名"

#: src/rcfile.c:713
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "語法「%s」無顏色指令"

#: src/rcfile.c:744
msgid "Missing key name"
msgstr "遺失按鍵名稱"

#: src/rcfile.c:760 src/rcfile.c:767
#, c-format
msgid "Key name %s is invalid"
msgstr "按鍵名稱 %s 無效"

#: src/rcfile.c:776
msgid "Must specify a function to bind the key to"
msgstr "必須指定按鍵所繫結的功能"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:787
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr "必須指定一個選單（或「all」所有）以綁定 / 取消綁定按鍵"

#: src/rcfile.c:806
#, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "無法將名稱「%s」映射到某一功能"

#: src/rcfile.c:813
#, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "無法名稱「%s」映射到某一選單"

#: src/rcfile.c:851
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr "功能「%s」不存在於選單「%s」"

#: src/rcfile.c:862
#, c-format
msgid "Keystroke %s may not be rebound"
msgstr "不能綁定按鍵輸入「%s」"

#: src/rcfile.c:953 src/rcfile.c:1479
#, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識「%s」指令"

#: src/rcfile.c:989
#, c-format
msgid "Error expanding %s: %s"
msgstr "展開 %s 時發生錯誤: %s"

#: src/rcfile.c:1032
#, c-format
msgid "Color '%s' takes no prefix"
msgstr "「%s」色彩沒有前綴"

#: src/rcfile.c:1040
#, c-format
msgid "Color \"%s\" not understood"
msgstr "未知顏色「%s」"

#: src/rcfile.c:1056 src/rcfile.c:1067
msgid "An attribute requires a subsequent comma"
msgstr "屬性需要有後接逗號"

#: src/rcfile.c:1111
msgid "Missing color name"
msgstr "缺少顏色名稱"

#: src/rcfile.c:1122 src/rcfile.c:1222
#, c-format
msgid "Missing regex string after '%s' command"
msgstr "在「%s」指令之後缺少正規表示式字串"

#: src/rcfile.c:1148
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""

#: src/rcfile.c:1211 src/rcfile.c:1459
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr "「%s」指令需要前置的 'syntax' 指令"

#: src/rcfile.c:1217
#, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "「default」語法不允許「%s」正規表示式"

#: src/rcfile.c:1264
#, c-format
msgid "Missing argument after '%s'"
msgstr "缺少「%s」之後的參數"

#: src/rcfile.c:1274
#, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "引數 '%s' 缺少閉合用的 \""

#: src/rcfile.c:1322
#, c-format
msgid "No key is bound to function '%s' in menu '%s'.  Exiting.\n"
msgstr "沒有按鍵綁定到「%2$s」目錄中的「%1$s」功能。正在退出。\n"

#: src/rcfile.c:1324
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "假如需要，使用 nano 的 -I 選項來調整您的 nanorc 設定。\n"

#: src/rcfile.c:1391
#, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "未找到要展開的語法「%s」"

#: src/rcfile.c:1448
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "指令「%s」在包含的檔案中不允許"

#: src/rcfile.c:1491
msgid "Missing option"
msgstr "缺少選項"

#: src/rcfile.c:1505
#, c-format
msgid "Unknown option \"%s\""
msgstr "選項「%s」未知"

#: src/rcfile.c:1520
#, c-format
msgid "Cannot unset option \"%s\""
msgstr "無法取消設定選項「%s」"

#: src/rcfile.c:1525
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項「%s」需要參數"

#: src/rcfile.c:1537
msgid "Argument is not a valid multibyte string"
msgstr "參數非有效的多位元字串"

#: src/rcfile.c:1584 src/rcfile.c:1602 src/rcfile.c:1607
msgid "Non-blank characters required"
msgstr "需要非空格字元"

#: src/rcfile.c:1586
msgid "Even number of characters required"
msgstr "需要偶數字元"

#: src/rcfile.c:1591
msgid "Two single-column characters required"
msgstr "需要兩個單欄字元"

#: src/rcfile.c:1681
msgid "Specified rcfile does not exist\n"
msgstr "找不到指定的 rcfile\n"

#: src/rcfile.c:1700
msgid "I can't find my home directory!  Wah!"
msgstr "找不到家目錄！哇！"

#. TRANSLATORS: The next four modify the search prompt.
#: src/search.c:99
msgid " [Case Sensitive]"
msgstr " [區分大小寫]"

#: src/search.c:100
msgid " [Regexp]"
msgstr " [正規表示式]"

#: src/search.c:104
msgid " (to replace) in selection"
msgstr " 在選取區塊中（替換）"

#: src/search.c:106
msgid " (to replace)"
msgstr " （替換）"

#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:230 src/search.c:303
msgid "Searching..."
msgstr "搜尋中…"

#: src/search.c:405
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到「%.*s%s」"

#. TRANSLATORS: This is a prompt.
#: src/search.c:594
msgid "Replace this instance?"
msgstr "取代這個？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:704
msgid "Replace with"
msgstr "以此取代"

#: src/search.c:730
#, c-format
msgid "Replaced %zd occurrence"
msgid_plural "Replaced %zd occurrences"
msgstr[0] "已取代 %zd 處"

#. TRANSLATORS: This is a prompt.
#: src/search.c:757
msgid "Enter line number, column number"
msgstr "輸入列碼, 欄碼"

#: src/search.c:926
msgid "Not a bracket"
msgstr "非括號"

#: src/search.c:969
msgid "No matching bracket"
msgstr "無對應括號"

#: src/search.c:984
msgid "Placed anchor"
msgstr "已放置錨點"

#: src/search.c:986
msgid "Removed anchor"
msgstr "已移除錨點"

#: src/search.c:998
msgid "Jumped to anchor"
msgstr "已跳至錨點"

#: src/search.c:1000
msgid "This is the only anchor"
msgstr "此為唯一錨點"

#: src/search.c:1002
msgid "There are no anchors"
msgstr "沒有錨點"

#: src/text.c:54
msgid "Mark Set"
msgstr "設定標記"

#: src/text.c:57
msgid "Mark Unset"
msgstr "取消設定標記"

#: src/text.c:381
msgid "Commenting is not supported for this file type"
msgstr "此檔案類型不支援備註功能"

#: src/text.c:391
msgid "Cannot comment past end of file"
msgstr "無法在檔案結尾新增備註"

#: src/text.c:511
msgid "Nothing to undo"
msgstr "沒有可以復原的變更"

#. TRANSLATORS: The next thirteen strings describe actions
#. * that are undone or redone.  They are all nouns, not verbs.
#: src/text.c:522 src/text.c:582 src/text.c:698 src/text.c:758
msgid "addition"
msgstr "新增"

#: src/text.c:530 src/text.c:710
msgid "line break"
msgstr "分列符號"

#: src/text.c:546 src/text.c:720
msgid "deletion"
msgstr "刪除模式"

#: src/text.c:556 src/text.c:726
msgid "line join"
msgstr "列連結"

#: src/text.c:572 src/text.c:741
msgid "replacement"
msgstr "取代模式"

#: src/text.c:592 src/text.c:762
msgid "erasure"
msgstr "擦除"

#. TRANSLATORS: Remember: these are nouns, NOT verbs.
#: src/text.c:598 src/text.c:767
msgid "cut"
msgstr "剪下"

#: src/text.c:602 src/text.c:771
msgid "paste"
msgstr "貼上"

#: src/text.c:609 src/text.c:775
msgid "insertion"
msgstr "插入"

#: src/text.c:638 src/text.c:798
msgid "indent"
msgstr "縮排"

#: src/text.c:642 src/text.c:802
msgid "unindent"
msgstr "移除縮排"

#: src/text.c:647 src/text.c:807
msgid "comment"
msgstr "註解"

#: src/text.c:651 src/text.c:811
msgid "uncomment"
msgstr "移除註解"

#: src/text.c:659
#, c-format
msgid "Undid %s"
msgstr "已復原 %s"

#: src/text.c:685
msgid "Nothing to redo"
msgstr "沒有可以重作的變更"

#: src/text.c:819
#, c-format
msgid "Redid %s"
msgstr "已重作 %s"

#. TRANSLATORS: This one goes with Undid/Redid messages.
#: src/text.c:1751 src/text.c:1967
msgid "justification"
msgstr "對齊"

#: src/text.c:1762 src/text.c:2082
msgid "Selection is empty"
msgstr "選取區域為空"

#: src/text.c:1971
msgid "Justified selection"
msgstr "已對齊選取區域"

#: src/text.c:1975
msgid "Justified file"
msgstr "已對齊檔案"

#: src/text.c:1977
msgid "Justified paragraph"
msgstr "已對齊段落"

#: src/text.c:2085
msgid "Buffer is empty"
msgstr "緩衝區空白"

#: src/text.c:2123 src/text.c:2711
#, c-format
msgid "Error invoking '%s'"
msgstr "呼叫「%s」時發生錯誤"

#: src/text.c:2127
#, c-format
msgid "Program '%s' complained"
msgstr "應用程式「%s」在抱怨"

#: src/text.c:2135
msgid "Nothing changed"
msgstr "未變更任何東西"

#. TRANSLATORS: The next two go with Undid/Redid messages.
#: src/text.c:2164
msgid "spelling correction"
msgstr "拼字修正"

#: src/text.c:2164
msgid "formatting"
msgstr "格式化中"

#: src/text.c:2183 src/text.c:2470
msgid "Finished checking spelling"
msgstr "拼字檢查完成"

#: src/text.c:2185
msgid "Buffer has been processed"
msgstr "已處理緩衝區"

#: src/text.c:2228
#, c-format
msgid "Unfindable word: %s"
msgstr "單字無法搜尋：%s"

#. TRANSLATORS: This is a prompt.
#: src/text.c:2247
msgid "Edit a replacement"
msgstr "編輯取代文字"

#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2260
msgid "Next word..."
msgstr "下一單字…"

#: src/text.c:2311
msgid "Invoking spell checker..."
msgstr "正在呼叫拼字檢查…"

#: src/text.c:2396 src/text.c:2617
msgid "Could not get size of pipe buffer"
msgstr "無法取得管線緩衝區的大小"

#: src/text.c:2464
msgid "Error invoking \"uniq\""
msgstr "呼叫「uniq」時發生錯誤"

#: src/text.c:2466
msgid "Error invoking \"sort\""
msgstr "呼叫「sort」時發生錯誤"

#: src/text.c:2468
msgid "Error invoking \"spell\""
msgstr "呼叫「spell」時發生錯誤"

#: src/text.c:2552
msgid "No linter is defined for this type of file"
msgstr "未定義此類型檔案的 Linter"

#: src/text.c:2562
msgid "Save modified buffer before linting?"
msgstr "在 Lint 之前儲存已修改過的緩衝區？"

#: src/text.c:2579
msgid "Invoking linter..."
msgstr "正在呼叫 linter…"

#: src/text.c:2716
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr "在指令中取得 0 個可解析的列：%s"

#: src/text.c:2754
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr "這個訊息關於未開啟的檔案 %s，是否在新緩衝區開啟此檔？"

#: src/text.c:2793
msgid "No messages for this file"
msgstr "沒有此檔案的訊息"

#: src/text.c:2843
msgid "At first message"
msgstr "第一則訊息"

#: src/text.c:2853
msgid "At last message"
msgstr "最近的訊息"

#: src/text.c:2895
msgid "No formatter is defined for this type of file"
msgstr "未定義此類型檔案的格式化工具"

#: src/text.c:2972
#, c-format
msgid "%s%zd %s,  %zu %s,  %zu %s"
msgstr "%s%zd %s,  %zu %s,  %zu %s"

#: src/text.c:2973
msgid "In Selection:  "
msgstr "於選取區塊："

#: src/text.c:2974
msgid "line"
msgid_plural "lines"
msgstr[0] "列"

#: src/text.c:2975
msgid "word"
msgid_plural "words"
msgstr[0] "個單字"

#: src/text.c:2976
msgid "character"
msgid_plural "characters"
msgstr[0] "字元"

#. TRANSLATORS: Shown when the next keystroke will be inserted verbatim.
#: src/text.c:2987
msgid "Verbatim Input"
msgstr "原形輸入"

#. TRANSLATORS: An invalid verbatim Unicode code was typed.
#: src/text.c:3005
msgid "Invalid code"
msgstr "代碼無效"

#. TRANSLATORS: Shown when no text is directly left of the cursor.
#: src/text.c:3081
msgid "No word fragment"
msgstr "未找到單詞片段"

#: src/text.c:3174
msgid "No further matches"
msgstr "未找到其他符合項目"

#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3177
msgid "No matches"
msgstr "未找到符合項目"

#: src/utils.c:295 src/utils.c:310
msgid "Nano is out of memory!\n"
msgstr "Nano 已用盡記憶體！\n"

#: src/winio.c:98
msgid "Recording a macro..."
msgstr "正在錄製巨集…"

#: src/winio.c:101
msgid "Stopped recording"
msgstr "停止錄製"

#: src/winio.c:113
msgid "Cannot run macro while recording"
msgstr "無法在錄製時執行巨集"

#: src/winio.c:119
msgid "Macro is empty"
msgstr "巨集為空"

#: src/winio.c:241
msgid "Too many errors from stdin\n"
msgstr "過多來自標準輸入的錯誤\n"

#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1361
#, c-format
msgid "Unicode Input: %s"
msgstr "萬國碼 Unicode 輸入：%s"

#. TRANSLATORS: The next five are "labels" in the title bar.
#: src/winio.c:1987
msgid "Linting --"
msgstr "Lint 中 --"

#: src/winio.c:1993
msgid "DIR:"
msgstr "目錄："

#: src/winio.c:2014
msgid "View"
msgstr "檢視"

#: src/winio.c:2020 src/winio.c:2024
msgid "Modified"
msgstr "已變更"

#: src/winio.c:2022
msgid "Restricted"
msgstr "受限模式"

#: src/winio.c:2128
msgid "(nameless)"
msgstr "（未命名）"

#: src/winio.c:2157
#, c-format
msgid " (%zu line)"
msgid_plural " (%zu lines)"
msgstr[0] " (%zu 列)"

#: src/winio.c:3527
#, c-format
msgid "line %*zd/%zd (%2d%%), col %2zu/%2zu (%3d%%), char %*zu/%zu (%2d%%)"
msgstr ""
"第 %*zd/%zd 橫列 (%2d%%)，第 %2zu/%2zu 直行 (%3d%%)，第 %*zu/%zu 個字元 (%2d"
"%%)"

#: src/winio.c:3681
msgid "The nano text editor"
msgstr "nano 文字編輯器"

#: src/winio.c:3682
msgid "version"
msgstr "版本"

#: src/winio.c:3683
msgid "Brought to you by:"
msgstr "來自於："

#: src/winio.c:3684
msgid "Special thanks to:"
msgstr "特別感謝："

#: src/winio.c:3685
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"

#: src/winio.c:3686
msgid "the many translators and the TP"
msgstr "許多的翻譯者與 TP"

#: src/winio.c:3687
msgid "For ncurses:"
msgstr "ncurses 部分："

#: src/winio.c:3688
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人…"

#: src/winio.c:3689
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"

#: lib/getopt.c:278
#, c-format
msgid "%s: option '%s%s' is ambiguous\n"
msgstr "%s：「%s%s」選項不明確\n"

#: lib/getopt.c:284
#, c-format
msgid "%s: option '%s%s' is ambiguous; possibilities:"
msgstr "%s：「%s%s」選項不明確；可能為："

#: lib/getopt.c:319
#, c-format
msgid "%s: unrecognized option '%s%s'\n"
msgstr "%s：「%s%s」選項無法識別\n"

#: lib/getopt.c:345
#, c-format
msgid "%s: option '%s%s' doesn't allow an argument\n"
msgstr ""
"%s：「%s%s」選項不允許參數\n"
"\n"

#: lib/getopt.c:360
#, c-format
msgid "%s: option '%s%s' requires an argument\n"
msgstr "%s：「%s%s」選項需要參數\n"

#: lib/getopt.c:621
#, c-format
msgid "%s: invalid option -- '%c'\n"
msgstr "%s：選項無效 -- '%c'\n"

#: lib/getopt.c:636 lib/getopt.c:682
#, c-format
msgid "%s: option requires an argument -- '%c'\n"
msgstr "%s：選項需要參數 -- '%c'\n"

#: lib/regcomp.c:135
msgid "Success"
msgstr "成功"

#: lib/regcomp.c:138
msgid "No match"
msgstr "無符合項目"

#: lib/regcomp.c:141
msgid "Invalid regular expression"
msgstr "正規表示式無效"

#: lib/regcomp.c:144
msgid "Invalid collation character"
msgstr "定序字元無效"

#: lib/regcomp.c:147
msgid "Invalid character class name"
msgstr "字元類別名稱無效"

#: lib/regcomp.c:150
msgid "Trailing backslash"
msgstr "結尾出現斜線"

#: lib/regcomp.c:153
msgid "Invalid back reference"
msgstr "反向參考無效"

#: lib/regcomp.c:156
msgid "Unmatched [, [^, [:, [., or [="
msgstr "不對稱的 [、[^、[:、[. 或 [="

#: lib/regcomp.c:159
msgid "Unmatched ( or \\("
msgstr "不對稱的 ( 或 \\("

#: lib/regcomp.c:162
msgid "Unmatched \\{"
msgstr "不對稱的 \\{"

#: lib/regcomp.c:165
msgid "Invalid content of \\{\\}"
msgstr "\\{\\} 中內容無效"

#: lib/regcomp.c:168
msgid "Invalid range end"
msgstr "範圍結尾無效"

#: lib/regcomp.c:171
msgid "Memory exhausted"
msgstr "記憶體耗盡"

#: lib/regcomp.c:174
msgid "Invalid preceding regular expression"
msgstr "前置正規表示式無效"

#: lib/regcomp.c:177
msgid "Premature end of regular expression"
msgstr "正規表示式過早結束"

#: lib/regcomp.c:180
msgid "Regular expression too big"
msgstr "正規表示式過長"

#: lib/regcomp.c:183
msgid "Unmatched ) or \\)"
msgstr "不對稱的 ) 或 \\)"

#: lib/regcomp.c:676
msgid "No previous regular expression"
msgstr "沒有前一個正規表示式"