# Simplified Chinese Messages for the nano editor
# Copyright (C) 2004, 2005, 2009, 2010, 2011 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009.
# Aron Xu <happyaron.xu@gmail.com>, 2009, 2010, 2011, 2015.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.4.2\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-12-12 15:09+0100\n"
"PO-Revision-Date: 2015-11-13 12:46+0800\n"
"Last-Translator: Aron Xu <happyaron.xu@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: src/browser.c:72
#, fuzzy, c-format
msgid "Cannot open directory: %s"
msgstr "无法上移一个目录"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:231
msgid "Go To Directory"
msgstr "跳至目录"

#: src/browser.c:236 src/browser.c:699 src/files.c:1107 src/files.c:2257
#: src/nano.c:1099 src/search.c:185 src/search.c:282 src/search.c:812
#: src/search.c:874 src/text.c:3184 src/text.c:3389
msgid "Cancelled"
msgstr "已取消"

#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:257 src/browser.c:289
#, fuzzy, c-format
msgid "Can't go outside of %s"
msgstr "无法写入%s 外部"

#: src/browser.c:280
msgid "Can't move up a directory"
msgstr "无法上移一个目录"

#: src/browser.c:296 src/files.c:994 src/files.c:1000 src/files.c:1761
#: src/files.c:1886 src/files.c:1930 src/files.c:1950 src/files.c:2066
#: src/files.c:2985 src/files.c:3206 src/rcfile.c:562 src/rcfile.c:1255
#, c-format
msgid "Error reading %s: %s"
msgstr "读取%s 出错：%s"

#: src/browser.c:378
msgid "The working directory has disappeared"
msgstr ""

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:563 src/browser.c:570
msgid "(dir)"
msgstr "(目录)"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:567
msgid "(parent dir)"
msgstr "(父目录)"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:597
msgid "(huge)"
msgstr ""

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:688 src/search.c:162
msgid "Search"
msgstr "搜索"

#: src/browser.c:730 src/search.c:351
msgid "Search Wrapped"
msgstr "已从头搜索"

#: src/browser.c:740 src/search.c:480
msgid "This is the only occurrence"
msgstr "这是惟一出现之处"

#: src/browser.c:784 src/search.c:445
msgid "No current search pattern"
msgstr "没有当前搜索模式"

#: src/color.c:185
#, fuzzy, c-format
msgid "Unknown syntax name: %s"
msgstr "缺少语法名称"

#: src/color.c:246
#, c-format
msgid "magic_load() failed: %s"
msgstr ""

#: src/color.c:250
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr ""

#: src/files.c:47
#, fuzzy, c-format
msgid "Directory '%s' does not exist"
msgstr "写入备份文件%s 出错：文件所有者不匹配"

#: src/files.c:49
#, c-format
msgid "Path '%s': %s"
msgstr ""

#: src/files.c:51
#, fuzzy, c-format
msgid "Path '%s' is not a directory"
msgstr "\"%s\" 是一个目录"

#: src/files.c:53
#, c-format
msgid "Path '%s' is not accessible"
msgstr ""

#: src/files.c:55
#, c-format
msgid "Directory '%s' is not writable"
msgstr ""

#. TRANSLATORS: Keep the next ten messages at most 76 characters.
#: src/files.c:151
msgid ""
"Warning: Modifying a file which is not locked, check directory permission?"
msgstr ""

#: src/files.c:190
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr ""

#: src/files.c:199
#, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr ""

#: src/files.c:219 src/files.c:228 src/files.c:266 src/files.c:276
#, fuzzy, c-format
msgid "Error writing lock file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:295
#, fuzzy, c-format
msgid "Error deleting lock file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:329
#, fuzzy, c-format
msgid "Error opening lock file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:343
#, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr ""

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:364
#, c-format
msgid "File %s is being edited (by %s with %s, PID %s); continue?"
msgstr ""

#: src/files.c:438
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "无法插入%s 外部的文件"

#: src/files.c:453 src/files.c:984 src/rcfile.c:541
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一个目录"

#: src/files.c:455
#, fuzzy, c-format
msgid "\"%s\" is not a normal file"
msgstr "\"%s\" 是一个设备文件"

#: src/files.c:578
msgid "No more open file buffers"
msgstr "无多余文件缓冲区可启用"

#: src/files.c:593
#, c-format
msgid "Switched to %s"
msgstr "切换至%s"

#: src/files.c:595 src/global.c:1001 src/winio.c:1997
msgid "New Buffer"
msgstr "新缓冲区"

#: src/files.c:911
#, c-format
msgid "File '%s' is unwritable"
msgstr ""

#. TRANSLATORS: Keep the next four messages at most 78 characters.
#: src/files.c:915
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式)"

#: src/files.c:920
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已读取%lu 行 (转换自Mac 格式)"

#: src/files.c:925
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已读取%lu 行 (转换自DOS 格式)"

#: src/files.c:931
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已读取%lu 行"

#: src/files.c:970
msgid "New File"
msgstr "新文件"

#: src/files.c:975
#, fuzzy, c-format
msgid "File \"%s\" not found"
msgstr "找不到\"%s\""

#: src/files.c:985 src/rcfile.c:542
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一个设备文件"

#: src/files.c:1003
msgid "Reading File"
msgstr "正在读取文件"

#: src/files.c:1067
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新缓冲区中执行的命令 [从%s] "

#: src/files.c:1070
#, c-format
msgid "Command to execute [from %s] "
msgstr "执行的命令 [从%s] "

#: src/files.c:1076
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "要插入新缓冲区的文件 [从%s] "

#: src/files.c:1079
#, c-format
msgid "File to insert [from %s] "
msgstr "要插入的文件 [从%s] "

#: src/files.c:1311
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重缓冲区模式中此按键无效"

#: src/files.c:1599
#, fuzzy
msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
msgstr "写入备份文件失败，继续保存吗？(如果不确定请输入N)"

#: src/files.c:1717
#, c-format
msgid "Can't write outside of %s"
msgstr "无法写入%s 外部"

#: src/files.c:1800 src/files.c:1825 src/files.c:1843 src/files.c:1856
#: src/files.c:1867 src/files.c:1895
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:1801 src/nano.c:673
msgid "Too many backup files?"
msgstr "太多备份文件？"

#: src/files.c:1939 src/files.c:1961 src/text.c:3114 src/text.c:3126
#: src/text.c:3489 src/text.c:3498
#, c-format
msgid "Error writing temp file: %s"
msgstr "写入临时文件%s 出错"

#: src/files.c:1980 src/files.c:1990 src/files.c:2014 src/files.c:2031
#: src/files.c:2041 src/files.c:2073 src/files.c:2080
#, c-format
msgid "Error writing %s: %s"
msgstr "写入%s 出错：%s"

#: src/files.c:2119
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已写入%lu 行"

#: src/files.c:2214
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2215
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2217
msgid " [Backup]"
msgstr " [备份]"

#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2225
msgid "Prepend Selection to File"
msgstr "前引选择部份于文件"

#: src/files.c:2226
msgid "Append Selection to File"
msgstr "附加选择部份至文件"

#: src/files.c:2227
msgid "Write Selection to File"
msgstr "写入选择部份至文件"

#: src/files.c:2230
msgid "File Name to Prepend to"
msgstr "要前引于的文件名"

#: src/files.c:2231
msgid "File Name to Append to"
msgstr "要附加至的文件名"

#: src/files.c:2232
msgid "File Name to Write"
msgstr "要写入的文件名"

#: src/files.c:2266
msgid "Save modified buffer anyway? "
msgstr ""

#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2368
msgid "File exists -- cannot overwrite"
msgstr ""

#: src/files.c:2378
#, fuzzy
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同的名称存档？"

#: src/files.c:2386
#, fuzzy, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "文件已存在，要覆盖吗？"

#: src/files.c:2407
#, fuzzy
msgid "File was modified since you opened it; continue saving? "
msgstr "在您打开文件后文件已被改变，是否继续保存？"

#: src/files.c:2838
msgid "(more)"
msgstr "(更多)"

#: src/files.c:2923
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下回车键继续\n"

#: src/files.c:2939
#, fuzzy, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"无法创建目录 %s：%s\n"
"然而保存和载入搜索历史或光标位置需要它。\n"

#: src/files.c:2946
#, fuzzy, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路径%s 应为一个目录，但现在不是。\n"
"Nano 将无法载入或保存搜索历史或光标位置\n"

#: src/files.c:2968
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I tried to move\n"
"to the preferred location (%s) but encountered an error: %s"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并试图移动到默认位置(%s)。\n"
"此操作出现错误：%s"

#: src/files.c:2972
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I moved\n"
"to the preferred location (%s)\n"
"(see the nano FAQ about this change)"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并已移动到默认位置(%s)。\n"
"(关于这个变更请参阅Nano 常见问题解答)"

#: src/files.c:3053 src/files.c:3061 src/files.c:3085 src/files.c:3097
#, fuzzy, c-format
msgid "Error writing %s: %s\n"
msgstr "写入%s 出错：%s"

#. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters.
#: src/global.c:465
msgid "Exit"
msgstr "离开"

#: src/global.c:466
msgid "Close"
msgstr "关闭"

#: src/global.c:467
#, fuzzy
msgid "Uncut Text"
msgstr "还原剪切"

#: src/global.c:469
#, fuzzy
msgid "Unjustify"
msgstr "还原对齐"

#: src/global.c:475
msgid "Read File"
msgstr "读档"

#: src/global.c:476
msgid "Where Is"
msgstr "搜索"

#: src/global.c:477
msgid "Replace"
msgstr "替换"

#: src/global.c:478
msgid "Go To Line"
msgstr "跳行"

#: src/global.c:479
msgid "Prev Line"
msgstr "上行"

#: src/global.c:480
msgid "Next Line"
msgstr "下行"

#: src/global.c:481
msgid "Prev Page"
msgstr "上页"

#: src/global.c:482
msgid "Next Page"
msgstr "下页"

#: src/global.c:484
msgid "Justify"
msgstr "对齐"

#: src/global.c:485
msgid "FullJstify"
msgstr "全部对齐"

#: src/global.c:487
msgid "Refresh"
msgstr "刷新"

#. TRANSLATORS: Try to keep this string at most 12 characters.
#: src/global.c:489
msgid "WhereIs Next"
msgstr "何处是下一个"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:495
msgid "Justify the current paragraph"
msgstr "对齐当前段落"

#: src/global.c:497
msgid "Cancel the current function"
msgstr "取消当前功能"

#: src/global.c:498
msgid "Display this help text"
msgstr "显示帮助"

#: src/global.c:501
msgid "Close the current file buffer / Exit from nano"
msgstr "关闭当前文件缓冲区 / 离开 nano"

#: src/global.c:503
msgid "Exit from nano"
msgstr "离开 nano"

#: src/global.c:507
msgid "Write the current file to disk"
msgstr "写入当前文件至磁盘"

#: src/global.c:509
msgid "Insert another file into the current one"
msgstr "插入其他文件至当前文件"

#: src/global.c:511
msgid "Search for a string or a regular expression"
msgstr "查找字符串或正则表示式"

#: src/global.c:513
#, fuzzy
msgid "Search for a string"
msgstr "查找字符串或正则表示式"

#: src/global.c:514
msgid "Refresh the file list"
msgstr ""

#: src/global.c:515
#, fuzzy
msgid "Go to lefthand column"
msgstr "跳至指定行与列位置"

#: src/global.c:516
#, fuzzy
msgid "Go to righthand column"
msgstr "跳至指定行与列位置"

#: src/global.c:518
#, fuzzy
msgid "Go one screenful up"
msgstr "跳至后一屏"

#: src/global.c:519
#, fuzzy
msgid "Go one screenful down"
msgstr "跳至后一屏"

#: src/global.c:521
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪切当前这行并存至剪贴板"

#: src/global.c:523
msgid "Uncut from the cutbuffer into the current line"
msgstr "从剪贴板粘贴至当前行"

#: src/global.c:524
msgid "Display the position of the cursor"
msgstr "显示光标位置"

#: src/global.c:526
msgid "Invoke the spell checker, if available"
msgstr "尝试运行拼写检查"

#: src/global.c:528
msgid "Replace a string or a regular expression"
msgstr "替换字符串或正则表示式"

#: src/global.c:529
msgid "Go to line and column number"
msgstr "跳至指定行与列位置"

#: src/global.c:531
#, fuzzy
msgid "Mark text starting from the cursor position"
msgstr "标记游标所在文字"

#: src/global.c:532
#, fuzzy
msgid "Repeat the last search"
msgstr "重复上次搜索"

#: src/global.c:534
msgid "Copy the current line and store it in the cutbuffer"
msgstr "拷贝当前行至剪贴板"

#: src/global.c:535
msgid "Indent the current line"
msgstr "缩进当前行"

#: src/global.c:536
msgid "Unindent the current line"
msgstr "取消缩进当前行"

#: src/global.c:537
msgid "Undo the last operation"
msgstr "撤销上次操作"

#: src/global.c:538
msgid "Redo the last undone operation"
msgstr "重做撤销的操作"

#: src/global.c:540
msgid "Go back one character"
msgstr "向后跳一字符"

#: src/global.c:541
msgid "Go forward one character"
msgstr "向前跳一字符"

#: src/global.c:542
msgid "Go back one word"
msgstr "向后跳一个词"

#: src/global.c:543
msgid "Go forward one word"
msgstr "向前跳一个词"

#: src/global.c:544
msgid "Go to previous line"
msgstr "跳至前一行"

#: src/global.c:545
msgid "Go to next line"
msgstr "跳至后一行"

#: src/global.c:546
msgid "Go to beginning of current line"
msgstr "跳至当前行首"

#: src/global.c:547
msgid "Go to end of current line"
msgstr "跳至当前行尾"

#: src/global.c:548
#, fuzzy
msgid "Go to previous block of text"
msgstr "跳至前一行"

#: src/global.c:549
#, fuzzy
msgid "Go to next block of text"
msgstr "跳至后一行"

#: src/global.c:552
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至当前段落开头，如已在段落开头，则调至上一段落起始处"

#: src/global.c:554
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至当前段落结尾，如已在段落结尾，则调至下一段落结尾"

#: src/global.c:556
msgid "Go to the first line of the file"
msgstr "跳至文件第一行"

#: src/global.c:557
msgid "Go to the last line of the file"
msgstr "跳至文件最后一行"

#: src/global.c:559
msgid "Go to the matching bracket"
msgstr "移动至对应括号"

#: src/global.c:561
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上卷动一行但不卷动游标"

#: src/global.c:563
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下卷动一行但不卷动游标"

#: src/global.c:566
msgid "Switch to the previous file buffer"
msgstr "切换至上个文件缓冲区"

#: src/global.c:567
msgid "Switch to the next file buffer"
msgstr "切换至下个文件缓冲区"

#: src/global.c:569
msgid "Insert the next keystroke verbatim"
msgstr "插入下一按键原型"

#: src/global.c:570
msgid "Insert a tab at the cursor position"
msgstr "插入制表符于游标位置"

#: src/global.c:571
msgid "Insert a newline at the cursor position"
msgstr "插入新行于游标位置"

#: src/global.c:572
msgid "Delete the character under the cursor"
msgstr "删除游标之下的字符"

#: src/global.c:574
msgid "Delete the character to the left of the cursor"
msgstr "删除游标左侧的字符"

#: src/global.c:577
#, fuzzy
msgid "Cut backward from cursor to word start"
msgstr "从游标剪切至行尾"

#: src/global.c:579
#, fuzzy
msgid "Cut forward from cursor to next word start"
msgstr "从游标剪切至行尾"

#: src/global.c:581
msgid "Cut from the cursor position to the end of the file"
msgstr "从游标位置剪切至文件结尾"

#: src/global.c:584
msgid "Justify the entire file"
msgstr "对齐整个文件"

#: src/global.c:588
msgid "Count the number of words, lines, and characters"
msgstr "计算字数、行数与字符数"

#: src/global.c:591
msgid "Refresh (redraw) the current screen"
msgstr "重新显示当前画面"

#: src/global.c:593
#, fuzzy
msgid "Suspend the editor (if suspension is enabled)"
msgstr "暂停编辑器(如果启用了暂停)"

#: src/global.c:595
#, fuzzy
msgid "Try and complete the current word"
msgstr "缩进当前行"

#: src/global.c:599
msgid "Comment/uncomment the current line or marked lines"
msgstr ""

#: src/global.c:602
msgid "Save file without prompting"
msgstr ""

#: src/global.c:603
msgid "Search next occurrence backward"
msgstr ""

#: src/global.c:604
msgid "Search next occurrence forward"
msgstr ""

#: src/global.c:606
msgid "Toggle the case sensitivity of the search"
msgstr "切换查找的区分大小写选项"

#: src/global.c:608
msgid "Reverse the direction of the search"
msgstr "反转搜索方向"

#: src/global.c:612
msgid "Toggle the use of regular expressions"
msgstr "切换使用正则表示式"

#: src/global.c:616
msgid "Recall the previous search/replace string"
msgstr "编辑前次搜索/替换字符串"

#: src/global.c:618
msgid "Recall the next search/replace string"
msgstr "编辑下次搜索/替换字符串"

#: src/global.c:621
msgid "Go to file browser"
msgstr "打开文件选单"

#: src/global.c:624
msgid "Toggle the use of DOS format"
msgstr "切换使用DOS 格式"

#: src/global.c:625
msgid "Toggle the use of Mac format"
msgstr "切换使用Mac 格式"

#: src/global.c:626
msgid "Toggle appending"
msgstr "切换追加"

#: src/global.c:627
msgid "Toggle prepending"
msgstr "切换前置插入"

#: src/global.c:628
msgid "Toggle backing up of the original file"
msgstr "切换储存既有文件的备份"

#: src/global.c:629
msgid "Execute external command"
msgstr "执行外部命令"

#: src/global.c:631
msgid "Close buffer without saving it"
msgstr ""

#: src/global.c:633
msgid "Toggle the use of a new buffer"
msgstr "切换使用新缓冲区"

#: src/global.c:636
msgid "Exit from the file browser"
msgstr "从文件选单离开"

#: src/global.c:637
msgid "Go to the first file in the list"
msgstr "跳至文件第一列"

#: src/global.c:638
msgid "Go to the last file in the list"
msgstr "跳至文件最后一列"

#: src/global.c:639
msgid "Go to the previous file in the list"
msgstr "跳至列表中的前一个文件"

#: src/global.c:640
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一个文件"

#: src/global.c:641
msgid "Go to directory"
msgstr "跳至目录"

#: src/global.c:644
#, fuzzy
msgid "Invoke the linter, if available"
msgstr "尝试运行拼写检查"

#: src/global.c:645
#, fuzzy
msgid "Go to previous linter msg"
msgstr "跳至前一行"

#: src/global.c:646
#, fuzzy
msgid "Go to next linter msg"
msgstr "跳至后一行"

#: src/global.c:648
#, fuzzy
msgid "Invoke formatter, if available"
msgstr "尝试运行拼写检查"

#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:663
msgid "Get Help"
msgstr "求助"

#: src/global.c:666 src/prompt.c:771
msgid "Cancel"
msgstr "取消"

#: src/global.c:679
#, fuzzy
msgid "Write Out"
msgstr "写入"

#: src/global.c:715
msgid "Go To Dir"
msgstr "跳至目录"

#: src/global.c:730
msgid "Cut Text"
msgstr "剪切文字"

#: src/global.c:745
msgid "To Spell"
msgstr "拼写检查"

#: src/global.c:749
#, fuzzy
msgid "To Linter"
msgstr "跳行"

#: src/global.c:752
#, fuzzy
msgid "Formatter"
msgstr "DOS 格式"

#: src/global.c:758
msgid "Cur Pos"
msgstr "游标位置"

#: src/global.c:769
msgid "Case Sens"
msgstr "区分大小写"

#: src/global.c:772
msgid "Regexp"
msgstr "正则表达式"

#: src/global.c:775
msgid "Backwards"
msgstr "向后搜索"

#: src/global.c:781
msgid "No Replace"
msgstr "不替换"

#: src/global.c:797
msgid "First Line"
msgstr "首行"

#: src/global.c:799
msgid "Last Line"
msgstr "尾行"

#: src/global.c:806
#, fuzzy
msgid "To Bracket"
msgstr "并非一个括号"

#: src/global.c:809
msgid "Mark Text"
msgstr "标记文字"

#: src/global.c:812
msgid "Copy Text"
msgstr "复制文字"

#: src/global.c:815
msgid "Indent Text"
msgstr "缩进文字"

#: src/global.c:817
msgid "Unindent Text"
msgstr "取消缩进"

#: src/global.c:820
msgid "Undo"
msgstr "撤销"

#: src/global.c:822
msgid "Redo"
msgstr "重做"

#: src/global.c:826 src/global.c:832
msgid "Back"
msgstr "向后"

#: src/global.c:828 src/global.c:834
msgid "Forward"
msgstr "向前"

#: src/global.c:838
msgid "Prev Word"
msgstr "前一个字"

#: src/global.c:840
msgid "Next Word"
msgstr "后一个字"

#: src/global.c:843
msgid "Home"
msgstr "顶端"

#: src/global.c:845
msgid "End"
msgstr "尾端"

#: src/global.c:853
#, fuzzy
msgid "Prev Block"
msgstr "前一个字"

#: src/global.c:855
#, fuzzy
msgid "Next Block"
msgstr "后一个字"

#: src/global.c:859
msgid "Beg of Par"
msgstr "段落开头"

#: src/global.c:861
msgid "End of Par"
msgstr "段落结尾"

#: src/global.c:866
msgid "Scroll Up"
msgstr "向上卷动"

#: src/global.c:868
msgid "Scroll Down"
msgstr "向下卷动"

#: src/global.c:873
#, fuzzy
msgid "Prev File"
msgstr "上个文件"

#: src/global.c:875
msgid "Next File"
msgstr "下个文件"

#: src/global.c:891
#, fuzzy
msgid "Verbatim"
msgstr "原形输入"

#: src/global.c:894
msgid "Tab"
msgstr "制表符"

#: src/global.c:896
msgid "Enter"
msgstr "回车"

#: src/global.c:899
msgid "Delete"
msgstr "删除"

#: src/global.c:901
msgid "Backspace"
msgstr "退格"

#. TRANSLATORS: The next two strings refer to cutting words.
#: src/global.c:912
#, fuzzy
msgid "Cut Left"
msgstr "剪切文字"

#: src/global.c:914
msgid "Cut Right"
msgstr ""

#: src/global.c:916
msgid "CutTillEnd"
msgstr "删至末端"

#: src/global.c:926
msgid "Word Count"
msgstr "字数统计"

#: src/global.c:933
msgid "Suspend"
msgstr "暂停"

#: src/global.c:937
msgid "Complete"
msgstr ""

#: src/global.c:941
#, fuzzy
msgid "Comment Lines"
msgstr "下行"

#: src/global.c:945
msgid "Save"
msgstr ""

#: src/global.c:948
msgid "Previous"
msgstr ""

#: src/global.c:950
#, fuzzy
msgid "Next"
msgstr "下行"

#: src/global.c:956
msgid "PrevHstory"
msgstr "前一记录"

#: src/global.c:959
msgid "NextHstory"
msgstr "后一记录"

#: src/global.c:968
msgid "Go To Text"
msgstr "跳至文字"

#: src/global.c:972
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:974
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:982
msgid "Append"
msgstr "附加"

#: src/global.c:984
msgid "Prepend"
msgstr "前引"

#: src/global.c:987
msgid "Backup File"
msgstr "备份文件"

#: src/global.c:994
msgid "Execute Command"
msgstr "执行命令"

#: src/global.c:1009
msgid "To Files"
msgstr "文件选单"

#: src/global.c:1017
msgid "First File"
msgstr "首文件"

#: src/global.c:1019
msgid "Last File"
msgstr "末文件"

#: src/global.c:1023
msgid "Discard buffer"
msgstr ""

#: src/global.c:1034
msgid "Left Column"
msgstr ""

#: src/global.c:1036
msgid "Right Column"
msgstr ""

#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1043
#, fuzzy
msgid "Prev Lint Msg"
msgstr "上行"

#: src/global.c:1045
#, fuzzy
msgid "Next Lint Msg"
msgstr "下行"

#. TRANSLATORS: The next seventeen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1336
msgid "Help mode"
msgstr "辅助模式"

#: src/global.c:1338
msgid "Constant cursor position display"
msgstr "持续显示游标位置"

#: src/global.c:1340
msgid "Use of one more line for editing"
msgstr "编辑时使用多一行"

#: src/global.c:1342
msgid "Smooth scrolling"
msgstr "平滑式卷动画面"

#: src/global.c:1344
#, fuzzy
msgid "Soft wrapping of overlong lines"
msgstr "不要自动换行"

#: src/global.c:1346
msgid "Whitespace display"
msgstr "显示空格"

#: src/global.c:1348
msgid "Color syntax highlighting"
msgstr "语法色彩高亮"

#: src/global.c:1350
msgid "Smart home key"
msgstr "智能HOME 键"

#: src/global.c:1352
msgid "Auto indent"
msgstr "自动缩进"

#: src/global.c:1354
msgid "Cut to end"
msgstr "剪切至行尾"

#: src/global.c:1356
#, fuzzy
msgid "Hard wrapping of overlong lines"
msgstr "不要自动换行"

#: src/global.c:1358
msgid "Conversion of typed tabs to spaces"
msgstr "已输入制表符至空白的转换"

#: src/global.c:1360
msgid "Backup files"
msgstr "备份文件"

#: src/global.c:1362
msgid "Reading file into separate buffer"
msgstr ""

#: src/global.c:1364
msgid "Mouse support"
msgstr "鼠标支持"

#: src/global.c:1366
msgid "No conversion from DOS/Mac format"
msgstr "不从 DOS/Mac 格式转换"

#: src/global.c:1368
msgid "Suspension"
msgstr "暂停"

#: src/global.c:1370
msgid "Line numbering"
msgstr ""

#: src/help.c:211
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.  "
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符，然后按下回车键。如果存在着符合您所输入的文"
"字，画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
"最近一次搜索的字符串将会显示在搜索提示符后的括号中。不输入任何文字而直接按下"
"回车键则会重复使用最近一次的搜索条件。"

#: src/help.c:220
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已经用标记选择了一段文字并进行搜索替换，就只有在选择文字中符合者将会被"
"替换。\n"
"\n"
" 以下的功能键可用于搜索模式：\n"
"\n"

#: src/help.c:226
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳行辅助说明\n"
"\n"
" 首先输入您想去的行数编号并按下回车键。如果文章中的行数比您所输入少，您将会被"
"带至文件的最后一行。\n"
"\n"
" 以下的功能键可用于跳行模式：\n"
"\n"

#: src/help.c:235
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入文件辅助说明\n"
"\n"
" 先把文件的名称键入，它将会插入在当前缓冲区的游标所在之处。\n"
"\n"
" 如果您所编译的 nano 支持多重文件缓冲区，并且将此功能以命令列旗标-F 或--"
"multibuffer、Meta-F 开关，或者 nanorc 文件来启动的话，所插入的文件 将会被载入"
"另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。 "

#: src/help.c:244
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一个空的缓冲区，那就不要输入任何文件名，或是在提示符号后键入一个"
"不存在的文件名，然后按下回车键。\n"
"\n"
" 以下的功能键可用于插入文件模式：\n"
"\n"

#: src/help.c:250
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file.  To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"写入文件辅助说明\n"
"\n"
" 先键入您想要以此来储存当前文件的名称，并按下回车键来储存文件。\n"
"\n"
" 如果已经用标记选择了文字，那么您将会被提示，只储存标记部份到另外的档案。为了"
"降低当前文件只被其中部份覆盖的机会，在此模式下，当前的文件名不会成为默认"
"值。\n"
"\n"
" 以下的功能键可用于写入文件模式：\n"
"\n"

#: src/help.c:264
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing.  You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory.  To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"文件选单辅助说明\n"
"\n"
" 文件选单是用来视觉化浏览目录结构，以选取要读出或写入的文件。您可以 使用上下"
"左右键或上页/下页来浏览，并用S 或回车键来选取所要的文件或者进入所选的目录。要"
"跳到上层时，选择在文件列表顶端名为 \"..\" 的目录。\n"
"\n"
" 以下的功能键可用于文件选单：\n"
"\n"

#: src/help.c:277
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符，然后按下回车键。如果存在著 符合您所输入的"
"文字，画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
" 最近一次搜索的字符串将会显示在搜索提示符号后面的括号中。不输入任何文字而直接"
"按下回车键则会重复最近一次的搜索条件。\n"
"\n"

#: src/help.c:286
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
"在搜索模式可使用如下的功能键：\n"
"\n"

#: src/help.c:290
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目录辅助说明\n"
"\n"
" 先输入您想要浏览的目录名称。\n"
"\n"
" 如果制表符补全的功能没有被关闭，您可以利用制表符(尝试)自动补全目录名称。\n"
"\n"
" 以下的功能键可用于跳至目录模式：\n"
"\n"

#: src/help.c:303
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited.  It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼写检查辅助说明\n"
"\n"
" 拼写检查程序会检查当前文件中所有文字的拼法。当遇到一个未知的字，它会 被标记"
"起来，并让您编辑替代文字。对于当前文件中每一个拼错的字，都会显示 替换的提示；"
"或者，如果已经用标记选择了文字的话，那就只作用于选取的文字之中。\n"
"\n"
" 以下的功能键可用于拼写检查模式：\n"
"\n"

#: src/help.c:318
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode).  If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"执行命令辅助说明\n"
"\n"
" 本选单允许您将shell 执行的命令输出结果，插入当前的缓冲区(或是多重缓冲区模式"
"下的新缓冲区)。如果您需要另一个空白缓冲区，就不要输入任何命令。\n"
"\n"
" 以下的功能键可用于执行命令模式：\n"
"\n"

#: src/help.c:331
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor.  There are four main sections of the editor.  The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified.  Next is the main editor window "
"showing the file being edited.  The status line is the third line from the "
"bottom and shows important messages.  "
msgstr ""
"nano 辅助说明\n"
"\n"
" nano 编辑器是设计来在功能性及易用性方面，模仿华盛顿大学的Pico 文字编辑器。它"
"包括四个主要部份：顶行显示程序版本、当前被编辑的文件名， 以及是否这文件已经更"
"动过。接着是主要编辑区，显示正在编辑的文件。状态行位于倒数第三行，用来显示重"
"要的信息。底部的两行则显示编辑器中最常用到的快捷键。\n"
"\n"
" "

#: src/help.c:341
#, fuzzy
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice.  Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup.  "
msgstr ""
"快捷键的记号定义如下：控制键组(Control-key) 序列是以一个 \"帽子\" (caret, ^)"
"符号来表示，它可以通过Ctrl键或是按两次Esc 键来输入。脱离键组(Escape-key) 序列"
"是以\"中介\" (Meta, M) 符号表示，它可以依照您的键盘设定，利用Esc，Alt 或Meta "
"来输入。"

#: src/help.c:348
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value.  The "
"following keystrokes are available in the main editor window.  Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按Esc 两次之后再键入从000 到255 之间的三位数字，则会输入该ASCII 码对应"
"的字符。下列按键组合可用于主要编辑区，替代按键则显示于括号内“\n"
"\n"

#: src/help.c:380 src/help.c:461
msgid "enable/disable"
msgstr "启用/关闭"

#: src/nano.c:544
#, fuzzy
msgid "Key is invalid in view mode"
msgstr "观看模式中此按键无效"

#: src/nano.c:550
#, fuzzy
msgid "This function is disabled in restricted mode"
msgstr "在限制模式中无法跳至%s 外部"

#: src/nano.c:558
msgid "Help is not available"
msgstr ""

#: src/nano.c:667
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"缓冲内容已写入 %s\n"

#: src/nano.c:669
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"缓冲内容未写入至 %s：%s\n"

#: src/nano.c:672
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"缓冲区未写入：%s\n"

#: src/nano.c:799
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n"
"\n"
msgstr ""
"用法: nano [选项] [[+行,列] 文件名]...\n"
"\n"

#: src/nano.c:801
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "选项\t\tGNU 长选项\t\t意义\n"

#: src/nano.c:803
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "选项\t\t意义\n"

#: src/nano.c:805
msgid "+LINE,COLUMN"
msgstr "+行,列"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:808
msgid "Start at line LINE, column COLUMN"
msgstr "从所指列数与行数开始"

#: src/nano.c:810
msgid "Enable smart home key"
msgstr "启用智能 HOME 键"

#: src/nano.c:812
msgid "Save backups of existing files"
msgstr "储存既有文件的备份"

#: src/nano.c:813
msgid "-C <dir>"
msgstr "-C <目录>"

#: src/nano.c:813
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目录>"

#: src/nano.c:814
msgid "Directory for saving unique backup files"
msgstr "用以储存独一备份文件的目录"

#: src/nano.c:817
msgid "Use bold instead of reverse video text"
msgstr "用粗体替代颜色反转"

#: src/nano.c:819
msgid "Convert typed tabs to spaces"
msgstr "将已输入的制表符转换为空白"

#: src/nano.c:824
msgid "Read a file into a new buffer by default"
msgstr ""

#: src/nano.c:827
msgid "Use (vim-style) lock files"
msgstr ""

#: src/nano.c:832
msgid "Log & read search/replace string history"
msgstr "记录与读取搜索/替换的历史字符串"

#: src/nano.c:836
msgid "Don't look at nanorc files"
msgstr "不要参考nanorc 文件"

#: src/nano.c:839
msgid "Fix numeric keypad key confusion problem"
msgstr "修正数字键区按键混淆问题"

#: src/nano.c:841
msgid "Don't add newlines to the ends of files"
msgstr "不要将换行加到文件末端"

#: src/nano.c:844
msgid "Don't convert files from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"

#: src/nano.c:846
msgid "Use one more line for editing"
msgstr "编辑时多使用一行"

#: src/nano.c:850
msgid "Log & read location of cursor position"
msgstr "记录并读取光标位置"

#: src/nano.c:853
msgid "-Q <str>"
msgstr "-Q <字符串>"

#: src/nano.c:853
msgid "--quotestr=<str>"
msgstr "--quotestr=<字符串>"

#: src/nano.c:853
msgid "Quoting string"
msgstr "引用代表字符串"

#: src/nano.c:856
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:858
msgid "Scroll by line instead of half-screen"
msgstr "按行滚动而不是半屏"

#: src/nano.c:860
msgid "-T <#cols>"
msgstr "-T <#列数>"

#: src/nano.c:860
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#列数>"

#: src/nano.c:861
msgid "Set width of a tab to #cols columns"
msgstr "设定制表符宽度为 #列数"

#: src/nano.c:863
msgid "Do quick statusbar blanking"
msgstr "状态行快速闪动"

#: src/nano.c:865
msgid "Print version information and exit"
msgstr "显示版本资讯并离开"

#: src/nano.c:868
msgid "Detect word boundaries more accurately"
msgstr "更正确地侦测单字边界"

#: src/nano.c:869
#, fuzzy
msgid "-X <str>"
msgstr "-Q <字符串>"

#: src/nano.c:869
#, fuzzy
msgid "--wordchars=<str>"
msgstr "--quotestr=<字符串>"

#: src/nano.c:870
msgid "Which other characters are word parts"
msgstr ""

#: src/nano.c:874
msgid "-Y <str>"
msgstr "-Y <字符串>"

#: src/nano.c:874
msgid "--syntax=<str>"
msgstr "--syntax=<字符串>"

#: src/nano.c:875
msgid "Syntax definition to use for coloring"
msgstr "用于加亮的语法定义"

#: src/nano.c:877
msgid "Constantly show cursor position"
msgstr "持续显示游标位置"

#: src/nano.c:879
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正退格键/删除键混淆问题"

#: src/nano.c:880
#, fuzzy
msgid "Show this help text and exit"
msgstr "显示帮助"

#: src/nano.c:882
msgid "Automatically indent new lines"
msgstr "自动缩进新行"

#: src/nano.c:883
msgid "Cut from cursor to end of line"
msgstr "从游标剪切至行尾"

#: src/nano.c:886
msgid "Show line numbers in front of the text"
msgstr ""

#: src/nano.c:889
msgid "Enable the use of the mouse"
msgstr "启用鼠标功能"

#: src/nano.c:891
msgid "Do not read the file (only write it)"
msgstr ""

#: src/nano.c:893
msgid "-o <dir>"
msgstr "-o <目录>"

#: src/nano.c:893
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目录>"

#: src/nano.c:894
msgid "Set operating directory"
msgstr "设定操作目录"

#: src/nano.c:896
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留XON (^Q) 和XOFF (^S) 按键"

#: src/nano.c:900
msgid "Silently ignore startup issues like rc file errors"
msgstr "沉默忽略启动问题, 比如rc 文件错误"

#: src/nano.c:903
msgid "-r <#cols>"
msgstr "-r <#列数>"

#: src/nano.c:903
msgid "--fill=<#cols>"
msgstr "--fill=<#列数>"

#: src/nano.c:904
#, fuzzy
msgid "Set hard-wrapping point at column #cols"
msgstr "设定折行宽度为 #列数"

#: src/nano.c:908
msgid "-s <prog>"
msgstr "-s <程序>"

#: src/nano.c:908
msgid "--speller=<prog>"
msgstr "--speller=<程序>"

#: src/nano.c:909
msgid "Enable alternate speller"
msgstr "启用替代的拼写检查程序"

#: src/nano.c:911
msgid "Auto save on exit, don't prompt"
msgstr "离开时自动储存，不要提示"

#: src/nano.c:913
msgid "Save a file by default in Unix format"
msgstr ""

#: src/nano.c:915
msgid "View mode (read-only)"
msgstr "查看(只读)模式"

#: src/nano.c:917
#, fuzzy
msgid "Don't hard-wrap long lines"
msgstr "不要自动换行"

#: src/nano.c:919
msgid "Don't show the two help lines"
msgstr "不要显示辅助区"

#: src/nano.c:921
msgid "Enable suspension"
msgstr "启用暂停功能"

#: src/nano.c:923
msgid "Enable soft line wrapping"
msgstr "启用软换行"

#: src/nano.c:935
#, fuzzy, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano 版本%s (编译于%s, %s)\n"

#: src/nano.c:938
#, c-format
msgid " (C) 2014..%s the contributors to nano\n"
msgstr ""

#: src/nano.c:940
#, fuzzy, c-format
msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
msgstr " 电子邮件: nano@nano-editor.org\t\t网页: http://www.nano-editor.org/"

#: src/nano.c:941
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 编译选项："

#: src/nano.c:1084
msgid "No file name"
msgstr ""

#: src/nano.c:1086
msgid "Save modified buffer?  (Answering \"No\" will DISCARD changes.) "
msgstr ""

#: src/nano.c:1147
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "对不起，无法从键盘设备重新打开标准输入\n"

#: src/nano.c:1171
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "正在从标准输入读入，可用 ^C 中断\n"

#: src/nano.c:1235
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到SIGHUP 或SIGTERM\n"

#: src/nano.c:1251
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "使用\"fg\" 返回nano\n"

#: src/nano.c:1273
msgid "Suspension is not enabled"
msgstr ""

#: src/nano.c:1418
msgid "enabled"
msgstr "已启用"

#: src/nano.c:1418
msgid "disabled"
msgstr "已禁用"

#: src/nano.c:1545
msgid "Unbound key"
msgstr ""

#: src/nano.c:1548
msgid "Unbindable key: M-["
msgstr ""

#: src/nano.c:1550
#, c-format
msgid "Unbound key: M-%c"
msgstr ""

#: src/nano.c:1552
#, c-format
msgid "Unbound key: ^%c"
msgstr ""

#: src/nano.c:1554
#, c-format
msgid "Unbound key: %c"
msgstr ""

#: src/nano.c:1727
msgid "XON ignored, mumble mumble"
msgstr "忽略XON，嗯嗯。"

#: src/nano.c:1732
msgid "XOFF ignored, mumble mumble"
msgstr "忽略XOFF，嗯嗯。"

#: src/nano.c:2145 src/rcfile.c:1211
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的制表符宽度%s 无效"

#: src/nano.c:2212 src/rcfile.c:1147
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填满行数\"%s\" 无效"

#: src/nano.c:2266
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr ""

#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy", for both "Oui" and "Yes".
#: src/prompt.c:730
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:731
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:732
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:758
msgid "Yes"
msgstr "是"

#: src/prompt.c:763
msgid "All"
msgstr "全部"

#: src/prompt.c:768
msgid "No"
msgstr "否"

#: src/rcfile.c:155
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在%s(第%lu 行)中发生错误："

#: src/rcfile.c:214
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "参数%s 有未封闭的 \""

#: src/rcfile.c:242 src/rcfile.c:694 src/rcfile.c:745 src/rcfile.c:844
msgid "Regex strings must begin and end with a \" character"
msgstr "正则表示式字符串必须以 \" 字符开始及结束"

#: src/rcfile.c:268 src/search.c:58
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "非法的正则表示式 \"%s\": %s"

#: src/rcfile.c:290
msgid "Missing syntax name"
msgstr "缺少语法名称"

#: src/rcfile.c:299
msgid "A syntax name must be quoted"
msgstr ""

#: src/rcfile.c:308
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 语法已被保留"

#: src/rcfile.c:338
#, fuzzy
msgid "The \"default\" syntax does not accept extensions"
msgstr "\"default\" 语法必须不含任何副文件名"

#: src/rcfile.c:378
msgid "Missing key name"
msgstr "缺少键名称"

#: src/rcfile.c:387 src/rcfile.c:398
msgid "Key name is too short"
msgstr ""

#: src/rcfile.c:408
#, fuzzy
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "键绑定必须以\"^\", \"M\" 或 \"F\" 开始"

#: src/rcfile.c:416
#, fuzzy, c-format
msgid "Key name %s is invalid"
msgstr "所要求的制表符宽度%s 无效"

#: src/rcfile.c:425
#, fuzzy
msgid "Must specify a function to bind the key to"
msgstr "必须指定键绑定到的函数"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:435
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr ""

#: src/rcfile.c:442
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "无法映射名字\"%s\" 到一个函数"

#: src/rcfile.c:449
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "无法映射名字\"%s\" 到一个菜单"

#: src/rcfile.c:483
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr ""

#: src/rcfile.c:493
#, fuzzy, c-format
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "对不起，键\"%s\" 属非法绑定"

#: src/rcfile.c:597
#, fuzzy, c-format
msgid "Error expanding %s: %s"
msgstr "读取%s 出错：%s"

#: src/rcfile.c:636
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"颜色 %s 无法识别。\n"
"有效的颜色是 \"green\"(绿)、\"red\"(红)、\"blue\"(蓝)、\n"
"\"white\"(白)、\"yellow\"(黄)、\"cyan\"(青)、\"magenta\"(瑰)和\n"
"\"black\"(黑)，选择性的前置字 \"bright\"(明亮) \n"
"可用于前景色。"

#: src/rcfile.c:657 src/rcfile.c:815 src/rcfile.c:878
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr ""

#: src/rcfile.c:663
msgid "Missing color name"
msgstr "缺少颜色名称"

#: src/rcfile.c:673 src/rcfile.c:827
#, fuzzy, c-format
msgid "Missing regex string after '%s' command"
msgstr "缺少颜色名称"

#: src/rcfile.c:739
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求对应的\"end=\""

#: src/rcfile.c:788
#, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色%s 不可为明亮"

#: src/rcfile.c:822
#, fuzzy, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "\"default\" 语法必须不含任何副文件名"

#: src/rcfile.c:883
#, fuzzy, c-format
msgid "Missing command after '%s'"
msgstr "缺少颜色名称"

#: src/rcfile.c:899
#, fuzzy, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "参数%s 有未封闭的 \""

#: src/rcfile.c:930
#, fuzzy, c-format
msgid "Fatal error: no keys mapped for function \"%s\".  Exiting.\n"
msgstr "严重错误; 没有键映射到函数 \"%s\""

#: src/rcfile.c:932
#, fuzzy, c-format
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "正在退出。如果您想调整您的nanorc 设置，请使用nano 的-I 选项。\n"

#: src/rcfile.c:987
#, fuzzy, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "无法映射名字\"%s\" 到一个菜单"

#: src/rcfile.c:1009 src/rcfile.c:1222
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "语法\"%s\" 没有color 命令"

#: src/rcfile.c:1040
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令\"%s\" 被禁止在包含文件中使用"

#: src/rcfile.c:1055
#, c-format
msgid "Command \"%s\" not understood"
msgstr "无法识别\"%s\" 命令"

#: src/rcfile.c:1067
#, fuzzy
msgid "Missing option"
msgstr "缺少颜色名称"

#: src/rcfile.c:1081
#, fuzzy, c-format
msgid "Unknown option \"%s\""
msgstr "未知旗标 %s"

#: src/rcfile.c:1094
#, fuzzy, c-format
msgid "Cannot unset option \"%s\""
msgstr "无法解除旗标 %s 设定"

#: src/rcfile.c:1106
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "选项%s 需要参数"

#: src/rcfile.c:1122
#, fuzzy
msgid "Argument is not a valid multibyte string"
msgstr "选项并非正确的多字节字符串"

#: src/rcfile.c:1160 src/rcfile.c:1181 src/rcfile.c:1188
msgid "Non-blank characters required"
msgstr "需要非空格字符"

#: src/rcfile.c:1167
msgid "Two single-column characters required"
msgstr "需要两个单行字符"

#: src/rcfile.c:1276
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目录！哇！"

#: src/rcfile.c:1291
#, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下回车键继续启动 nano\n"

#: src/search.c:92
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#. TRANSLATORS: The next three modify the search prompt.
#: src/search.c:164
msgid " [Case Sensitive]"
msgstr " [区分大小写]"

#: src/search.c:166
msgid " [Regexp]"
msgstr " [正则表示式]"

#: src/search.c:169
msgid " [Backwards]"
msgstr " [向后搜索]"

#. TRANSLATORS: The next two modify the search prompt.
#: src/search.c:172
msgid " (to replace) in selection"
msgstr " 在标记中(替换)"

#: src/search.c:174
msgid " (to replace)"
msgstr " (替换)"

#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:292
#, fuzzy
msgid "Searching..."
msgstr "搜索"

#. TRANSLATORS: This is a prompt.
#: src/search.c:659
msgid "Replace this instance?"
msgstr "替换这个？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:801
msgid "Replace with"
msgstr "替换为"

#: src/search.c:831
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已替换%lu 处"

#. TRANSLATORS: This is a prompt.
#: src/search.c:870
msgid "Enter line number, column number"
msgstr "输入列号，行号"

#: src/search.c:892
msgid "Invalid line or column number"
msgstr "无效的列号或行号"

#: src/search.c:1045
msgid "Not a bracket"
msgstr "并非一个括号"

#: src/search.c:1111
msgid "No matching bracket"
msgstr "无对应括号"

#: src/text.c:66
msgid "Mark Set"
msgstr "标记设定"

#: src/text.c:71
msgid "Mark Unset"
msgstr "标记解除"

#: src/text.c:83
#, c-format
msgid "Error invoking \"%s\""
msgstr "运行 \"%s\" 错误"

#: src/text.c:479
msgid "Commenting is not supported for this file type"
msgstr ""

#: src/text.c:495
msgid "Cannot comment past end of file"
msgstr ""

#: src/text.c:688
msgid "Nothing in undo buffer!"
msgstr "没有可撤销的操作！"

#. TRANSLATORS: Eight of the next nine strings describe actions
#. * that are undone or redone.  It are all nouns, not verbs.
#: src/text.c:706 src/text.c:735 src/text.c:868 src/text.c:909
msgid "text add"
msgstr "文字增加"

#: src/text.c:716 src/text.c:879
msgid "text delete"
msgstr "文本删除"

#: src/text.c:739 src/text.c:918
msgid "line join"
msgstr "行合并"

#: src/text.c:758 src/text.c:934
msgid "text cut"
msgstr "文字剪切"

#: src/text.c:763 src/text.c:938
msgid "text uncut"
msgstr "取消剪切"

#: src/text.c:769 src/text.c:914
#, fuzzy
msgid "Internal error: line is missing.  Please save your work."
msgstr "内部错误：重做设置失败。请保存您的工作"

#: src/text.c:773 src/text.c:888
msgid "line break"
msgstr "换行符"

#: src/text.c:783 src/text.c:958
msgid "comment"
msgstr ""

#: src/text.c:787 src/text.c:962
msgid "uncomment"
msgstr ""

#: src/text.c:791 src/text.c:949
msgid "text insert"
msgstr "文本插入"

#: src/text.c:811 src/text.c:942
msgid "text replace"
msgstr "文本替换"

#: src/text.c:818 src/text.c:966 src/text.c:1280 src/text.c:1450
msgid "Internal error: unknown type.  Please save your work."
msgstr "内部错误：未知类型。请保存您的工作。"

#: src/text.c:824
#, c-format
msgid "Undid action (%s)"
msgstr "已撤销操作(%s)"

#: src/text.c:843
msgid "Nothing to re-do!"
msgstr "没有可重做的操作！"

#: src/text.c:852
#, fuzzy
msgid "Internal error: cannot set up redo.  Please save your work."
msgstr "内部错误：无法配置取消剪切。请保存您的工作"

#: src/text.c:972
#, c-format
msgid "Redid action (%s)"
msgstr "已重做操作(%s)"

#: src/text.c:1062 src/text.c:2759 src/text.c:3193
msgid "Could not create pipe"
msgstr "无法建立管线功能"

#: src/text.c:1088 src/text.c:2846 src/text.c:3000 src/text.c:3241
#: src/text.c:3531
msgid "Could not fork"
msgstr "执行功能无效"

#: src/text.c:2127
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字符串%s：%s"

#: src/text.c:2501
msgid "Can now UnJustify!"
msgstr "现在可以还原对齐！"

#: src/text.c:2671
#, c-format
msgid "Unfindable word: %s"
msgstr ""

#: src/text.c:2691
msgid "Edit a replacement"
msgstr "编辑替代文字"

#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2707
#, fuzzy
msgid "Next word..."
msgstr "后一个字"

#: src/text.c:2761
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立错字列表，请稍待..."

#: src/text.c:2852 src/text.c:3248
msgid "Could not get size of pipe buffer"
msgstr "无法得知管线缓冲区大小"

#: src/text.c:2901
msgid "Error invoking \"spell\""
msgstr "运行 \"spell\" 错误"

#: src/text.c:2904
msgid "Error invoking \"sort -f\""
msgstr "运行 \"sort -f\" 错误"

#: src/text.c:2907
msgid "Error invoking \"uniq\""
msgstr "运行 \"uniq\" 错误"

#: src/text.c:3132
#, fuzzy
msgid "Invoking spell checker, please wait"
msgstr "尝试运行拼写检查"

#: src/text.c:3146
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼写检查失败：%s"

#: src/text.c:3148
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼写检查失败：%s：%s"

#: src/text.c:3151
msgid "Finished checking spelling"
msgstr "拼写检查结束"

#: src/text.c:3176
#, fuzzy
msgid "No linter defined for this type of file!"
msgstr "不要将换行加到文件末端"

#: src/text.c:3181
msgid "Save modified buffer before linting?"
msgstr ""

#: src/text.c:3198
msgid "Invoking linter, please wait"
msgstr ""

#: src/text.c:3353
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr ""

#: src/text.c:3383
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr ""

#: src/text.c:3400
msgid "No more errors in unopened files, cancelling"
msgstr ""

#: src/text.c:3440
#, fuzzy
msgid "At last message"
msgstr "显示此信息"

#: src/text.c:3445
#, fuzzy
msgid "At first message"
msgstr "显示此信息"

#: src/text.c:3482
msgid "Finished"
msgstr ""

#: src/text.c:3504
msgid "Invoking formatter, please wait"
msgstr ""

#: src/text.c:3559
msgid "Finished formatting"
msgstr ""

#: src/text.c:3641
#, c-format
msgid "%sWords: %lu  Lines: %ld  Chars: %lu"
msgstr "%s字数: %lu  行数: %ld  字符数: %lu"

#: src/text.c:3642
msgid "In Selection:  "
msgstr "于选择部份："

#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3656
msgid "Verbatim Input"
msgstr "原形输入"

#: src/text.c:3851
msgid "No further matches"
msgstr ""

#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3855
#, fuzzy
msgid "No matches"
msgstr "无对应括号"

#: src/utils.c:413 src/utils.c:425
msgid "nano is out of memory!"
msgstr "nano 已耗尽内存！"

#: src/utils.c:645
#, fuzzy, c-format
msgid "Internal error: can't match line %ld.  Please save your work."
msgstr "内部错误：无法匹配行 %d。请保存您的工作"

#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not know about.
#: src/winio.c:1210
msgid "Unknown sequence"
msgstr ""

#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1374
#, fuzzy, c-format
msgid "Unicode Input: %s"
msgstr "Unicode 输入"

#: src/winio.c:1992
msgid "DIR:"
msgstr "目录："

#: src/winio.c:2000
msgid "File:"
msgstr "文件："

#: src/winio.c:2004 src/winio.c:2008
msgid "Modified"
msgstr "已更改"

#: src/winio.c:2006
msgid "View"
msgstr "查看"

#: src/winio.c:3154
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "行 %ld/%ld (%d%%)，列 %lu/%lu (%d%%)，字符 %lu/%lu (%d%%)"

#: src/winio.c:3285
msgid "The nano text editor"
msgstr "nano 文本编辑器"

#: src/winio.c:3286
msgid "version"
msgstr "版本"

#: src/winio.c:3287
msgid "Brought to you by:"
msgstr "来自于:"

#: src/winio.c:3288
msgid "Special thanks to:"
msgstr "特别感谢:"

#: src/winio.c:3289
msgid "The Free Software Foundation"
msgstr "自由软体基金会"

#: src/winio.c:3290
msgid "the many translators and the TP"
msgstr ""

#: src/winio.c:3291
msgid "For ncurses:"
msgstr "ncurses 部份:"

#: src/winio.c:3292
msgid "and anyone else we forgot..."
msgstr "以及其他我们不记得的人..."

#: src/winio.c:3293
msgid "Thank you for using nano!"
msgstr "谢谢您使用 nano！"

#~ msgid ""
#~ "Read %lu line (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式- 警告：无写入权限)"

#~ msgid ""
#~ "Read %lu line (Converted from Mac format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from Mac format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行 (转换自Mac 格式- 警告：无写入权限)"

#~ msgid ""
#~ "Read %lu line (Converted from DOS format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行 (转换自DOS 格式- 警告：无写入权限)"

#~ msgid "Read %lu line ( Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行(警告：无写入权限)"

#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 设定下，无法前引或附加至符号连结档"

#~ msgid "Window size is too small for nano...\n"
#~ msgstr "窗口尺寸对 nano 来说太小了...\n"

#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符号连结，而是覆盖"

#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "对不起，此功能的支持以禁用"

#~ msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
#~ msgstr "储存更动过的缓冲区吗(回答 \"No\" 会撤销修改)？"

#~ msgid "Unknown Command"
#~ msgstr "未知命令"

#~ msgid "Cannot add a color command without a syntax command"
#~ msgstr "无法直接增加颜色而没有语法行"

#~ msgid "Missing regex string"
#~ msgstr "缺少正则表示式字符串"

#~ msgid "Cannot add a header regex without a syntax command"
#~ msgstr "无法直接增加头部正则表达式而没有语法行"

#~ msgid "Cannot add a magic string regex without a syntax command"
#~ msgstr "无法在没有语法命令的情况下添加魔字符串"

#~ msgid "Missing magic string name"
#~ msgstr "缺少魔字符串名称"

#, fuzzy
#~| msgid "Cannot add a header regex without a syntax command"
#~ msgid "Cannot add a linter without a syntax command"
#~ msgstr "无法直接增加头部正则表达式而没有语法行"

#, fuzzy
#~| msgid "Cannot add a color command without a syntax command"
#~ msgid "Cannot add formatter without a syntax command"
#~ msgstr "无法直接增加颜色而没有语法行"

#, fuzzy
#~| msgid "Internal error: can't setup uncut.  Please save your work."
#~ msgid "Internal error: cannot set up uncut.  Please save your work."
#~ msgstr "内部错误：无法配置取消剪切。请保存您的工作"

#~ msgid "Insert File"
#~ msgstr "插入文件"

#~ msgid "Go to previous screen"
#~ msgstr "跳至前一屏"

#~ msgid "Find Other Bracket"
#~ msgstr "寻找其他括号"

#~ msgid "Long line wrapping"
#~ msgstr "长行转换"

#~ msgid "Multiple file buffers"
#~ msgstr "多重文件缓冲区"

#~ msgid "Soft line wrapping"
#~ msgstr "软换行"

#~ msgid "Enable multiple file buffers"
#~ msgstr "启用多重文件缓冲区功能"

#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允许通用撤销[试验性特性]"

#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略，为与Pico 相容)"

#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必须指定键绑定到的菜单(或 \"all\")"

#~ msgid "Missing flag"
#~ msgstr "缺少旗标"

#~ msgid "line wrap"
#~ msgstr "自动换行"

#~ msgid "Internal error: unknown type.  Please save your work"
#~ msgstr "内部错误：未知类型。请保存您的工作"

#~ msgid "Could not pipe"
#~ msgstr "管线功能无效"

#~ msgid "line split"
#~ msgstr "行分割"