smol/po/zh_TW.po

2796 lines
67 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Traditional Chinese Translation for the nano editor.
# Copyright (C) 2004, 05, 13, 18, 19 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# Wei-Lun Chao <bluebat@member.fsf.org>, 2004, 2005, 2013.
# pan93412 <pan93412@gmail.com>, 2018, 2019.
msgid ""
msgstr ""
"Project-Id-Version: GNU nano 4.3-pre1\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2019-06-18 10:30+0200\n"
"PO-Revision-Date: 2019-06-06 21:38+0800\n"
"Last-Translator: pan93412 <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Lokalize 19.04.1\n"
#: src/browser.c:67
#, c-format
msgid "Cannot open directory: %s"
msgstr "無法開啟目錄:%s"
#. TRANSLATORS: This is a prompt.
#: src/browser.c:226
msgid "Go To Directory"
msgstr "前往目錄"
#: src/browser.c:227 src/browser.c:683 src/files.c:1091 src/files.c:2115
#: src/nano.c:1005 src/search.c:114 src/search.c:208 src/search.c:712
#: src/search.c:765 src/text.c:2686 src/text.c:2881
msgid "Cancelled"
msgstr "已取消"
#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:244 src/browser.c:275
#, c-format
msgid "Can't go outside of %s"
msgstr "不可超出 %s 範圍"
#: src/browser.c:266
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"
#: src/browser.c:281 src/files.c:971 src/files.c:977 src/files.c:1623
#: src/files.c:1736 src/files.c:1778 src/files.c:1798 src/files.c:1928
#: src/history.c:311 src/history.c:407 src/rcfile.c:574 src/rcfile.c:1287
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤:%s"
#: src/browser.c:364
msgid "The working directory has disappeared"
msgstr "目前的工作目錄已經消失"
#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:554 src/browser.c:561
msgid "(dir)"
msgstr "(目錄)"
#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:558
msgid "(parent dir)"
msgstr "(上層目錄)"
#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:588
msgid "(huge)"
msgstr "(huge)"
#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:673 src/search.c:100
msgid "Search"
msgstr "搜尋"
#: src/browser.c:674 src/search.c:104
msgid " [Backwards]"
msgstr " [往後搜尋]"
#: src/browser.c:713 src/browser.c:718 src/search.c:278
msgid "Search Wrapped"
msgstr "已從頭開始搜尋"
#: src/browser.c:729 src/search.c:414
msgid "This is the only occurrence"
msgstr "這是唯一出現之處"
#: src/browser.c:775 src/search.c:352
msgid "No current search pattern"
msgstr "無符合搜尋樣式之結果"
#: src/color.c:189
#, c-format
msgid "Unknown syntax name: %s"
msgstr "語法名稱未知:%s"
#: src/color.c:245
#, c-format
msgid "magic_load() failed: %s"
msgstr "magic_load() 錯誤:%s"
#: src/color.c:249
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr "magic_file(%s) 錯誤:%s"
#: src/cut.c:366 src/cut.c:433
msgid "Nothing was cut"
msgstr "未剪下任何內容"
#: src/cut.c:476
msgid "Cutbuffer is empty"
msgstr "剪下緩衝區為空"
#: src/files.c:45
#, c-format
msgid "Directory '%s' does not exist"
msgstr "目錄「%s」不存在"
#: src/files.c:47
#, c-format
msgid "Path '%s': %s"
msgstr "位置「%s」%s"
#: src/files.c:49
#, c-format
msgid "Path '%s' is not a directory"
msgstr "「%s」不是一個目錄"
#: src/files.c:51
#, c-format
msgid "Path '%s' is not accessible"
msgstr "位置「%s」無法存取"
#: src/files.c:53
#, c-format
msgid "Directory '%s' is not writable"
msgstr "目錄「%s」唯讀"
#. TRANSLATORS: Keep the next eight messages at most 76 characters.
#: src/files.c:181
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr "無法確定用於鎖定檔的個人身份getpwuid() 執行失敗)"
#: src/files.c:190
#, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr "無法確定用於鎖定檔的主機名稱:%s"
#: src/files.c:210 src/files.c:219 src/files.c:257 src/files.c:264
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "寫入鎖定檔 %s 時發生錯誤:%s"
#: src/files.c:286
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "刪除鎖定檔 %s 時發生錯誤:%s"
#: src/files.c:317
#, c-format
msgid "Error opening lock file %s: %s"
msgstr "開啟鎖定檔 %s 時發生錯誤:%s"
#: src/files.c:331
#, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr "讀取鎖定檔 %s 時發生錯誤:未讀取足夠的資料"
#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:350
#, c-format
msgid "File %s is being edited (by %s with %s, PID %s); continue?"
msgstr "檔案 %s 正被編輯(來自 %s 與 %s、PID 為 %s繼續"
#: src/files.c:425
#, c-format
msgid "Can't read file from outside of %s"
msgstr "無法讀取 %s 外的檔案"
#: src/files.c:436 src/rcfile.c:552
#, c-format
msgid "\"%s\" is a directory"
msgstr "「%s」為目錄"
#: src/files.c:441 src/rcfile.c:553
#, c-format
msgid "\"%s\" is a device file"
msgstr "「%s」為裝置檔案"
#: src/files.c:447
#, c-format
msgid "\"%s\" is a FIFO"
msgstr "「%s」是個 FIFO"
#: src/files.c:531 src/files.c:557
msgid "spelling correction"
msgstr "拼字修正"
#. TRANSLATORS: first %s is file name, second %s is file format.
#: src/files.c:591
#, c-format
msgid "%s -- %zu line (%s)"
msgid_plural "%s -- %zu lines (%s)"
msgstr[0] "%s -- 第 %zu 行 (%s)"
#: src/files.c:593 src/files.c:599 src/global.c:1010 src/winio.c:2117
msgid "New Buffer"
msgstr "新緩衝區"
#: src/files.c:594
msgid "DOS"
msgstr "DOS"
#: src/files.c:594
msgid "Mac"
msgstr "Mac"
#: src/files.c:597
#, c-format
msgid "%s -- %zu line"
msgid_plural "%s -- %zu lines"
msgstr[0] "%s -- 第 %zu 行"
#: src/files.c:607
msgid "No more open file buffers"
msgstr "無其他已開啟檔案的緩衝區"
#: src/files.c:748 src/files.c:969 src/files.c:1841
msgid "Interrupted"
msgstr "已中止"
#: src/files.c:887
#, c-format
msgid "File '%s' is unwritable"
msgstr "檔案「%s」唯讀"
#. TRANSLATORS: Keep the next four messages at most 78 characters.
#: src/files.c:891
#, c-format
msgid "Read %zu line (Converted from DOS and Mac format)"
msgid_plural "Read %zu lines (Converted from DOS and Mac format)"
msgstr[0] "已讀取 %zu 列(轉檔自 DOS 與 Mac 格式)"
#: src/files.c:896
#, c-format
msgid "Read %zu line (Converted from Mac format)"
msgid_plural "Read %zu lines (Converted from Mac format)"
msgstr[0] "已讀取 %zu 列(轉檔自 Mac 格式)"
#: src/files.c:901
#, c-format
msgid "Read %zu line (Converted from DOS format)"
msgid_plural "Read %zu lines (Converted from DOS format)"
msgstr[0] "已讀取 %zu 列(轉檔自 DOS 格式)"
#: src/files.c:907
#, c-format
msgid "Read %zu line"
msgid_plural "Read %zu lines"
msgstr[0] "已讀取 %zu 列"
#: src/files.c:941
msgid "New File"
msgstr "新檔案"
#: src/files.c:946
#, c-format
msgid "File \"%s\" not found"
msgstr "未找到檔案「%s」"
#: src/files.c:953
msgid "Reading from FIFO..."
msgstr "正在從 FIFO 讀取…"
#: src/files.c:981
msgid "Reading..."
msgstr "讀取中…"
#. TRANSLATORS: The next six messages are prompts.
#: src/files.c:1047
msgid "Command to execute in new buffer"
msgstr "要在新緩衝區執行的指令"
#: src/files.c:1050
msgid "Command to execute"
msgstr "要執行的指令"
#: src/files.c:1058
#, c-format
msgid "File to read unconverted into new buffer [from %s]"
msgstr "要讀取的檔案未轉換至新的緩衝區 [來自 %s]"
#: src/files.c:1061
#, c-format
msgid "File to read into new buffer [from %s]"
msgstr "將檔案讀入新的緩衝區 [來自 %s]"
#: src/files.c:1066
#, c-format
msgid "File to insert unconverted [from %s]"
msgstr "要不轉換插入的檔案 [來自 %s]"
#: src/files.c:1069
#, c-format
msgid "File to insert [from %s]"
msgstr "要插入的檔案 [從 %s]"
#: src/files.c:1425
#, c-format
msgid "Invalid operating directory: %s\n"
msgstr "操作目錄無效:%s\n"
#: src/files.c:1475
msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
msgstr "寫入備份檔案失敗;繼續儲存?(若不確定則輸入 N。) "
#: src/files.c:1492
#, c-format
msgid "Invalid backup directory: %s\n"
msgstr "備份目錄無效:%s\n"
#: src/files.c:1582
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"
#: src/files.c:1659 src/files.c:1683 src/files.c:1701 src/files.c:1715
#: src/files.c:1727 src/files.c:1746
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤:%s"
#: src/files.c:1660 src/nano.c:596
msgid "Too many backup files?"
msgstr "過多備份檔案?"
#: src/files.c:1787 src/files.c:1809 src/text.c:2603 src/text.c:2621
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔時發生錯誤:%s"
#: src/files.c:1817
msgid "Writing to FIFO..."
msgstr "正在寫入 FIFO…"
#: src/files.c:1843 src/files.c:1853 src/files.c:1875 src/files.c:1892
#: src/files.c:1902 src/files.c:1935 src/files.c:1944
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"
#: src/files.c:1861
msgid "Writing..."
msgstr "寫入中…"
#: src/files.c:1994
#, c-format
msgid "Wrote %zu line"
msgid_plural "Wrote %zu lines"
msgstr[0] "已寫入 %zu 列"
#: src/files.c:2075
msgid " [DOS Format]"
msgstr " [DOS 格式]"
#: src/files.c:2076
msgid " [Mac Format]"
msgstr " [Mac 格式]"
#: src/files.c:2077
msgid " [Backup]"
msgstr " [備份]"
#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2084
msgid "Prepend Selection to File"
msgstr "將選取區域複製到檔案開頭"
#: src/files.c:2085
msgid "Append Selection to File"
msgstr "將選取區域複製至檔案結尾"
#: src/files.c:2086
msgid "Write Selection to File"
msgstr "將選取區域寫入檔案"
#: src/files.c:2088
msgid "File Name to Prepend to"
msgstr "要前置內容的檔案名稱"
#: src/files.c:2089
msgid "File Name to Append to"
msgstr "要附加內容的檔案名稱"
#: src/files.c:2092
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"
#. TRANSLATORS: Concisely say the screen is too small.
#: src/files.c:2175
msgid "Too tiny"
msgstr "螢幕過小"
#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2205
msgid "File exists -- cannot overwrite"
msgstr "檔案已存在 -- 無法覆蓋"
#: src/files.c:2215
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同名稱存檔?"
#: src/files.c:2223
#, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "檔案「%s」已存在是否覆寫"
#: src/files.c:2249
msgid "File on disk has changed"
msgstr "磁碟上的檔案已變更"
#: src/files.c:2251
msgid "File was modified since you opened it; continue saving? "
msgstr "檔案在您開啟後被修改過;是否繼續儲存? "
#: src/files.c:2657
msgid "(more)"
msgstr "(更多)"
#. TRANSLATORS: Try to keep the next two strings at most 10 characters.
#: src/global.c:501
msgid "Exit"
msgstr "退出"
#: src/global.c:502
msgid "Close"
msgstr "關閉"
#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:510
msgid "Cancel the current function"
msgstr "取消目前功能"
#: src/global.c:511
msgid "Display this help text"
msgstr "顯示此說明內容"
#: src/global.c:513
msgid "Close the current buffer / Exit from nano"
msgstr "關閉目前緩衝區 / 退出 nano"
#: src/global.c:515
msgid "Write the current buffer (or the marked region) to disk"
msgstr "將目前緩衝區(或已標記區域)寫入磁碟"
#: src/global.c:517
msgid "Insert another file into current buffer (or into new buffer)"
msgstr "將其他檔案插入目前緩衝區(或插入新緩衝區)"
#: src/global.c:519
msgid "Search forward for a string or a regular expression"
msgstr "使用字串或正規表示式來向前搜尋"
#: src/global.c:521
msgid "Search backward for a string or a regular expression"
msgstr "使用字串或正規表示式來向後搜尋"
#: src/global.c:523
msgid "Search forward for a string"
msgstr "向前搜尋一個字串"
#: src/global.c:524
msgid "Search backward for a string"
msgstr "向後搜尋一個字串"
#: src/global.c:525
msgid "Refresh the file list"
msgstr "重新整理檔案列表"
#: src/global.c:527
msgid "Go to lefthand column"
msgstr "前往左欄"
#: src/global.c:528
msgid "Go to righthand column"
msgstr "前往右欄"
#: src/global.c:529
msgid "Go to first row in this column"
msgstr "前往此欄第一列"
#: src/global.c:530
msgid "Go to last row in this column"
msgstr "前往此欄最後一列"
#: src/global.c:533
msgid "Go one screenful up"
msgstr "向上捲動一個畫面"
#: src/global.c:534
msgid "Go one screenful down"
msgstr "向下捲動一個畫面"
#: src/global.c:536
msgid "Cut current line (or marked region) and store it in cutbuffer"
msgstr "剪下目前行(或選取區域)並在剪貼簿儲存該行"
#: src/global.c:538
msgid "Paste the contents of cutbuffer at current cursor position"
msgstr "在目前游標位置貼上剪貼簿的內容"
#: src/global.c:539
msgid "Display the position of the cursor"
msgstr "顯示游標位置"
#: src/global.c:541
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"
#: src/global.c:543
msgid "Replace a string or a regular expression"
msgstr "取代字串或正規表示式"
#: src/global.c:544
msgid "Go to line and column number"
msgstr "前往指定列與行碼"
#: src/global.c:546
msgid "Mark text starting from the cursor position"
msgstr "從游標位置開始標記文字"
#: src/global.c:548
msgid "Copy current line (or marked region) and store it in cutbuffer"
msgstr "複製目前行(或選取區域)並在剪貼簿儲存該行"
#: src/global.c:549
msgid "Throw away the current line (or marked region)"
msgstr "刪除目前行(或選取區域)"
#: src/global.c:550
msgid "Indent the current line (or marked lines)"
msgstr "縮排目前行(或選取區域)"
#: src/global.c:551
msgid "Unindent the current line (or marked lines)"
msgstr "移除目前行(或選取區域)的縮排"
#: src/global.c:552
msgid "Undo the last operation"
msgstr "復原上個動作"
#: src/global.c:553
msgid "Redo the last undone operation"
msgstr "重作上一筆被復原的動作"
#: src/global.c:555
msgid "Go back one character"
msgstr "往回跳一字元"
#: src/global.c:556
msgid "Go forward one character"
msgstr "往前跳一字元"
#: src/global.c:557
msgid "Go back one word"
msgstr "往回跳一單詞"
#: src/global.c:558
msgid "Go forward one word"
msgstr "往前跳一單詞"
#: src/global.c:559
msgid "Go to previous line"
msgstr "前往上一列"
#: src/global.c:560
msgid "Go to next line"
msgstr "前往下一列"
#: src/global.c:561
msgid "Go to beginning of current line"
msgstr "前往目前行首"
#: src/global.c:562
msgid "Go to end of current line"
msgstr "前往目前行尾"
#: src/global.c:563
msgid "Go to previous block of text"
msgstr "前往前一塊文字"
#: src/global.c:564
msgid "Go to next block of text"
msgstr "前往後一塊文字"
#: src/global.c:567
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "前往目前段落開頭;而後再跳前一段落的開頭"
#: src/global.c:569
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "前往目前段落結尾;而後再跳後一段落的結尾"
#: src/global.c:571
msgid "Go to the first line of the file"
msgstr "前往檔案第一列"
#: src/global.c:572
msgid "Go to the last line of the file"
msgstr "前往檔案最後一列"
#: src/global.c:574
msgid "Go to the matching bracket"
msgstr "前往對應的括號"
#: src/global.c:578
msgid "Scroll up one line without moving the cursor textually"
msgstr "向上捲動一列而不捲動文字上的游標"
#: src/global.c:580
msgid "Scroll down one line without moving the cursor textually"
msgstr "向下捲動一列而不捲動文字上的游標"
#: src/global.c:583
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"
#: src/global.c:584
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"
#: src/global.c:586
msgid "Insert the next keystroke verbatim"
msgstr "插入下個按鍵的原形"
#: src/global.c:587
msgid "Insert a tab at the cursor position"
msgstr "在游標位置插入定位字元 (Tab)"
#: src/global.c:588
msgid "Insert a newline at the cursor position"
msgstr "在游標位置插入換行符號"
#: src/global.c:589
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"
#: src/global.c:591
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"
#: src/global.c:594
msgid "Delete backward from cursor to word start"
msgstr "刪除游標之前到單字開頭的內容"
#: src/global.c:596
msgid "Delete forward from cursor to next word start"
msgstr "刪除游標之後到下個單字開頭的內容"
#: src/global.c:598
msgid "Cut from the cursor position to the end of the file"
msgstr "剪下游標位置至檔案結尾的內容"
#: src/global.c:601
msgid "Justify the current paragraph"
msgstr "對齊目前段落"
#: src/global.c:602
msgid "Justify the entire file"
msgstr "對齊整個檔案"
#: src/global.c:606
msgid "Count the number of words, lines, and characters"
msgstr "計算字數、行數與字元數"
#: src/global.c:609
msgid "Refresh (redraw) the current screen"
msgstr "重新繪製目前畫面"
#: src/global.c:611
msgid "Suspend the editor (if suspension is enabled)"
msgstr "暫停編輯器(若已啟用暫停功能)"
#: src/global.c:613
msgid "Try and complete the current word"
msgstr "嘗試完成目前單字"
#: src/global.c:617
msgid "Comment/uncomment the current line (or marked lines)"
msgstr "註解或取消註解目前行(或標記行)"
#: src/global.c:619
msgid "Save file without prompting"
msgstr "儲存檔案而不經確認"
#: src/global.c:620
msgid "Search next occurrence backward"
msgstr "往回搜尋下一個結果"
#: src/global.c:621
msgid "Search next occurrence forward"
msgstr "向前搜尋下一個結果"
#: src/global.c:623
msgid "Start/stop recording a macro"
msgstr "開始 / 停止錄製巨集"
#: src/global.c:624
msgid "Run the last recorded macro"
msgstr "執行上次錄製的巨集"
#: src/global.c:627
msgid "Toggle the case sensitivity of the search"
msgstr "切換搜尋是否要符合大小寫"
#: src/global.c:629
msgid "Reverse the direction of the search"
msgstr "反轉搜尋方向"
#: src/global.c:631
msgid "Toggle the use of regular expressions"
msgstr "切換是否使用正規表示式"
#: src/global.c:634
msgid "Recall the previous search/replace string"
msgstr "重用上次搜尋 / 取代字串"
#: src/global.c:636
msgid "Recall the next search/replace string"
msgstr "重用下次搜尋 / 取代字串"
#: src/global.c:639
msgid "Toggle the use of DOS format"
msgstr "切換是否使用 DOS 格式"
#: src/global.c:640
msgid "Toggle the use of Mac format"
msgstr "切換是否使用 Mac 格式"
#: src/global.c:641
msgid "Toggle appending"
msgstr "切換是否附加"
#: src/global.c:642
msgid "Toggle prepending"
msgstr "切換是否前置"
#: src/global.c:643
msgid "Toggle backing up of the original file"
msgstr "切換是否備份既有檔案"
#: src/global.c:644
msgid "Execute external command"
msgstr "執行外部指令"
#: src/global.c:646
msgid "Pipe the current buffer (or marked region) to the command"
msgstr "將目前緩衝區(或已標記區域)透過管線傳入指令"
#: src/global.c:647
msgid "Do not convert from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"
#: src/global.c:650
msgid "Toggle the use of a new buffer"
msgstr "切換是否使用新緩衝區"
#: src/global.c:652
msgid "Close buffer without saving it"
msgstr "關閉緩衝區而不儲存"
#: src/global.c:654
msgid "Go to file browser"
msgstr "開啟檔案瀏覽器"
#: src/global.c:655
msgid "Exit from the file browser"
msgstr "退出檔案瀏覽器"
#: src/global.c:656
msgid "Go to the first file in the list"
msgstr "前往列表中第一個檔案"
#: src/global.c:657
msgid "Go to the last file in the list"
msgstr "前往列表中最後一個檔案"
#: src/global.c:658
msgid "Go to the previous file in the list"
msgstr "前往列表中上一個檔案"
#: src/global.c:659
msgid "Go to the next file in the list"
msgstr "前往列表中下一個檔案"
#: src/global.c:660
msgid "Go to directory"
msgstr "前往目錄"
#: src/global.c:663
msgid "Invoke the linter, if available"
msgstr "嘗試呼叫 linter。"
#: src/global.c:664
msgid "Go to previous linter msg"
msgstr "前往上一個 linter 訊息"
#: src/global.c:665
msgid "Go to next linter msg"
msgstr "前往下一個 linter 訊息"
#. TRANSLATORS: Try to keep the next ninety strings or so at most 10
#. * characters. Some strings may be longer -- run nano and see.
#: src/global.c:680
msgid "Get Help"
msgstr "取得說明"
#: src/global.c:683 src/prompt.c:695
msgid "Cancel"
msgstr "取消"
#: src/global.c:696
msgid "Write Out"
msgstr "儲存"
#: src/global.c:704 src/global.c:1025
msgid "Read File"
msgstr "讀取"
#: src/global.c:711 src/global.c:744
msgid "Justify"
msgstr "對齊"
#: src/global.c:717 src/global.c:732 src/global.c:834 src/global.c:945
msgid "Refresh"
msgstr "重整"
#: src/global.c:722 src/global.c:810
msgid "Where Is"
msgstr "搜尋"
#: src/global.c:725 src/global.c:783
msgid "Replace"
msgstr "取代"
#: src/global.c:729
msgid "Go To Dir"
msgstr "前往目錄"
#: src/global.c:736
msgid "Cut Text"
msgstr "剪下文字"
#: src/global.c:739
msgid "Paste Text"
msgstr "貼上文字"
#: src/global.c:748
msgid "To Spell"
msgstr "拼字檢查"
#: src/global.c:753
msgid "Cur Pos"
msgstr "游標位置"
#: src/global.c:760 src/global.c:796 src/global.c:901
msgid "Go To Line"
msgstr "跳行"
#: src/global.c:765
msgid "Undo"
msgstr "復原"
#: src/global.c:767
msgid "Redo"
msgstr "重做"
#: src/global.c:770
msgid "Mark Text"
msgstr "標記文字"
#: src/global.c:772
msgid "Copy Text"
msgstr "複製文字"
#: src/global.c:776
msgid "Case Sens"
msgstr "區分大小寫"
#: src/global.c:778
msgid "Regexp"
msgstr "正規表示式"
#: src/global.c:780
msgid "Backwards"
msgstr "往回搜尋"
#: src/global.c:786
msgid "No Replace"
msgstr "不取代"
#: src/global.c:790
msgid "Older"
msgstr "較舊"
#: src/global.c:792
msgid "Newer"
msgstr "較新"
#: src/global.c:800 src/global.c:932
msgid "FullJstify"
msgstr "全部對齊"
#: src/global.c:805
msgid "To Bracket"
msgstr "至 Bracket"
#. TRANSLATORS: This starts a backward search.
#: src/global.c:812 src/global.c:818 src/global.c:832
msgid "Where Was"
msgstr "搜尋"
#. TRANSLATORS: This refers to searching the preceding occurrence.
#: src/global.c:822
msgid "Previous"
msgstr "上個"
#: src/global.c:825 src/global.c:830
msgid "Next"
msgstr "下個"
#. TRANSLATORS: This means move the cursor one character back.
#: src/global.c:839 src/global.c:844
msgid "Back"
msgstr "往回"
#: src/global.c:841 src/global.c:846
msgid "Forward"
msgstr "向前"
#: src/global.c:850
msgid "Prev Word"
msgstr "前一個字"
#: src/global.c:852
msgid "Next Word"
msgstr "後一個字"
#: src/global.c:855
msgid "Home"
msgstr "頂端"
#: src/global.c:857
msgid "End"
msgstr "尾端"
#: src/global.c:860
msgid "Prev Line"
msgstr "上列"
#: src/global.c:862
msgid "Next Line"
msgstr "下列"
#: src/global.c:865
msgid "Scroll Up"
msgstr "向上捲動"
#: src/global.c:867
msgid "Scroll Down"
msgstr "向下捲動"
#: src/global.c:871
msgid "Prev Block"
msgstr "前一個區塊"
#: src/global.c:873
msgid "Next Block"
msgstr "後一個區塊"
#: src/global.c:876
msgid "Beg of Par"
msgstr "段落開頭"
#: src/global.c:878
msgid "End of Par"
msgstr "段落結尾"
#: src/global.c:882 src/global.c:1035
msgid "Prev Page"
msgstr "上頁"
#: src/global.c:884 src/global.c:1037
msgid "Next Page"
msgstr "下頁"
#: src/global.c:887
msgid "First Line"
msgstr "首列"
#: src/global.c:889
msgid "Last Line"
msgstr "尾列"
#: src/global.c:893
msgid "Prev File"
msgstr "上個檔案"
#: src/global.c:895
msgid "Next File"
msgstr "下個檔案"
#: src/global.c:905
msgid "Tab"
msgstr "定位鍵 (Tab)"
#: src/global.c:907
msgid "Enter"
msgstr "Enter 鍵"
#: src/global.c:910
msgid "Backspace"
msgstr "Backspace 鍵"
#: src/global.c:912
msgid "Delete"
msgstr "刪除鍵"
#. TRANSLATORS: The next two strings refer to deleting words.
#: src/global.c:923
msgid "Chop Left"
msgstr "裁斷左側內容"
#: src/global.c:925
msgid "Chop Right"
msgstr "裁斷右側內容"
#: src/global.c:927
msgid "CutTillEnd"
msgstr "刪至末端"
#: src/global.c:937
msgid "Word Count"
msgstr "字數統計"
#: src/global.c:941
msgid "Verbatim"
msgstr "原形"
#: src/global.c:949
msgid "Suspend"
msgstr "暫停"
#: src/global.c:953
msgid "Indent"
msgstr "縮排"
#: src/global.c:955
msgid "Unindent"
msgstr "移除縮排"
#: src/global.c:959
msgid "Comment Lines"
msgstr "註解該行"
#: src/global.c:963
msgid "Complete"
msgstr "完成"
#: src/global.c:967
msgid "Record"
msgstr "錄製"
#: src/global.c:969
msgid "Run Macro"
msgstr "執行巨集"
#: src/global.c:972
msgid "Zap Text"
msgstr "刪除文字"
#: src/global.c:977
msgid "To Linter"
msgstr "執行 Linter"
#: src/global.c:981
msgid "Save"
msgstr "儲存"
#: src/global.c:984
msgid "Go To Text"
msgstr "前往文字"
#: src/global.c:988
msgid "DOS Format"
msgstr "DOS 格式"
#: src/global.c:990
msgid "Mac Format"
msgstr "Mac 格式"
#: src/global.c:998
msgid "Append"
msgstr "附加"
#: src/global.c:1000
msgid "Prepend"
msgstr "前置"
#: src/global.c:1003
msgid "Backup File"
msgstr "備份檔案"
#: src/global.c:1014
msgid "No Conversion"
msgstr "未轉換"
#: src/global.c:1019
msgid "Execute Command"
msgstr "執行指令"
#: src/global.c:1022
msgid "Pipe Text"
msgstr "將文字傳入管線"
#: src/global.c:1032
msgid "To Files"
msgstr "開啟檔案瀏覽器"
#: src/global.c:1040
msgid "First File"
msgstr "第一個檔案"
#: src/global.c:1042
msgid "Last File"
msgstr "最後一個檔案"
#: src/global.c:1045
msgid "Left Column"
msgstr "左欄"
#: src/global.c:1047
msgid "Right Column"
msgstr "右欄"
#: src/global.c:1049
msgid "Top Row"
msgstr "上排"
#: src/global.c:1051
msgid "Bottom Row"
msgstr "下排"
#: src/global.c:1056
msgid "Discard buffer"
msgstr "放棄緩衝區"
#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1061
msgid "Prev Lint Msg"
msgstr "上一個 Lint 訊息"
#: src/global.c:1063
msgid "Next Lint Msg"
msgstr "下一個 Lint 訊息"
#. TRANSLATORS: The next fourteen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1385
msgid "Help mode"
msgstr "說明模式"
#: src/global.c:1387
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"
#: src/global.c:1389
msgid "Soft wrapping of overlong lines"
msgstr "虛擬換過長行"
#: src/global.c:1391
msgid "Whitespace display"
msgstr "顯示空格"
#: src/global.c:1393
msgid "Color syntax highlighting"
msgstr "語法色彩標示"
#: src/global.c:1395
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"
#: src/global.c:1397
msgid "Auto indent"
msgstr "自動縮排"
#: src/global.c:1399
msgid "Cut to end"
msgstr "剪至列尾"
#: src/global.c:1401
msgid "Hard wrapping of overlong lines"
msgstr "實際換過長行"
#: src/global.c:1403
msgid "Conversion of typed tabs to spaces"
msgstr "已將輸入的 Tab 轉換成空白"
#: src/global.c:1405
msgid "Mouse support"
msgstr "滑鼠支援"
#: src/global.c:1407
msgid "Suspension"
msgstr "暫停"
#: src/global.c:1409
msgid "Line numbering"
msgstr "標示行碼"
#: src/help.c:283
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search. "
msgstr ""
"搜尋指令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元,然後按下 Enter 鍵。如果有符合您所輸入的文"
"字,畫面就會更新到最符合搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在搜尋提示後方的括號中。不輸入任何文字而直接按下 "
"Enter 鍵則會執行前次搜尋。"
#: src/help.c:292
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選取了一段文字並進行搜尋取代,就只有在選擇文字中符合者才會被"
"替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式:\n"
"\n"
#: src/help.c:298
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter. If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"「跳行」輔助說明\n"
"\n"
" 首先輸入想前往的行碼,並按下 Enter 鍵。如果文件中的行數比您所輸入要少,則會"
"跳至檔案最後一行。\n"
"\n"
" 以下的功能鍵可用於跳行模式:\n"
"\n"
#: src/help.c:307
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers). "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先輸入檔案名稱,該檔案中的內容將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區,並使用 -F、--multibuffer 指令列旗"
"標、Meta-F 開關或者 nanorc\n"
" 檔案來啟用此功能的話,所插入的檔案將會被載入到獨立的緩衝區中(可利用 Meta-< "
"和 > 在檔案緩衝區間切換)。"
#: src/help.c:316
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空緩衝區,那就不要輸入任何檔名,或是在提示文字後輸入不存在的"
"檔名後按下 Enter 鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式:\n"
"\n"
#: src/help.c:322
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file. To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 請先輸入您想要以什麼檔名來儲存目前檔案,並按下 Enter 儲存檔案。\n"
"\n"
" 如果已經用標記功能選取文字,那麼您將被提示只將部份選擇內容儲存成一個檔案。為"
"了降低目前檔案只被其中部分覆寫的機會,在此模式下,目前的檔名不會成為預設"
"值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式:\n"
"\n"
#: src/help.c:336
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing. You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory. To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構,以選取要讀出或寫入的檔案。您可以\n"
" 使用上下左右鍵或上頁/下頁來瀏覽,並用 S 或 Enter 鍵來選取所要的檔案或者 進入"
"所選的目錄。要跳到上層時,選擇在檔案列表頂端名為「..」的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單:\n"
"\n"
#: src/help.c:349
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜尋指令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元,然後按下 Enter 鍵 (Enter)。如果存在著\n"
" 符合您所輸入的文字,畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。\n"
" 不輸入任何文字而直接按下 Enter 鍵則會履行前次的搜尋。\n"
"\n"
#: src/help.c:358
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於瀏覽器搜尋模式:\n"
"\n"
#: src/help.c:362
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"前往目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果未關閉 Tab 完成的功能,\n"
" 您可以利用 Tab 鍵 (嘗試) 自動完成目錄名稱。\n"
"\n"
" 以下的功能鍵可用於前往目錄模式:\n"
"\n"
#: src/help.c:375
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file. "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited. It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。\n"
" 當遇到一個未知的字,它將被標記起來,並讓您編輯取代文字。\n"
" 對於目前檔案中每一個拼錯的字,都會顯示取代的提示;\n"
" 或者,如果已經用標記選擇了文字的話,那就只作用於選取的文字之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式:\n"
"\n"
#: src/help.c:390
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or into a new buffer). If the command is preceded "
"by '|' (the pipe symbol), the current contents of the buffer (or marked "
"region) will be piped to the command. "
msgstr ""
"執行指令輔助說明\n"
"\n"
" 這個模式允許您插入從 shell 執行之指令的輸出到目前的緩衝區 (或是插入到新的緩"
"衝區)。\n"
" 若在指令之前加上「|」(pipe 管線符號),則目前緩衝區的內容(或選取區塊)將會 "
"pipe 到指令中。"
#: src/help.c:396
msgid ""
"If you just need another blank buffer, do not enter any command.\n"
"\n"
msgstr ""
"若您只是需要另一個空白緩衝區,請勿輸入任何指令。\n"
"\n"
#: src/help.c:398
msgid ""
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於執行指令模式:\n"
"\n"
#: src/help.c:401
msgid ""
"=== Linter ===\n"
"\n"
" In this mode, the status bar shows an error message or warning, and the "
"cursor is put at the corresponding position in the file. With PageUp and "
"PageDown you can switch to earlier and later messages.\n"
"\n"
msgstr ""
"=== Linter ===\n"
"\n"
" 這個模式中,狀態列會顯示錯誤或警告訊息,且游標將會放在檔案中的對應位置。\n"
" 使用 PageUp 和 PageDown 按鈕可以切換到較新或較舊的訊息。\n"
"\n"
#: src/help.c:406
msgid ""
" The following function keys are available in Linter mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於 Linter 模式:\n"
"\n"
#: src/help.c:413
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor. There are four main sections of the editor. The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified. Next is the main editor window "
"showing the file being edited. The status line is the third line from the "
"bottom and shows important messages. "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面模仿華盛頓大學的 Pico 文字編輯器。\n"
" 它含有四個主要部分:頂列顯示程式版本、目前被編輯的檔案名稱,以及是否這檔案已"
"經變更過。\n"
" 接著是主要編輯區,用來顯示正在編輯的檔案。狀態列位於倒數第三列,用來顯示重要"
"的訊息。"
#: src/help.c:423
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice. Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup. "
msgstr ""
"底部的兩列顯示編輯器中最常用到的快捷鍵。\n"
"\n"
" 快捷鍵的定義如下:控制鍵組 (Control-key) 序列是以一個帽子符號「^」表示,\n"
" 且可藉由使用 Ctrl 鍵或按兩下 Esc 鍵輸入。\n"
" Meta-Key 序列是以「M-」符號表示,\n"
" 且可以藉由您的鍵盤設定來選擇使用 Alt、Cmd 或 Esc 鍵輸入。"
#: src/help.c:430
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value. The "
"following keystrokes are available in the main editor window. Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外,按 Esc 兩次 之後再輸入從 000 到 255 之間的三位數字,則會輸入該 ASCII 碼"
"對應的字元。下列按鍵組合可用於主要編輯區,替代按鍵則顯示於括弧內:\n"
"\n"
#: src/help.c:462 src/help.c:534
msgid "enable/disable"
msgstr "啟用/停用"
#: src/history.c:240
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下 Enter 鍵繼續\n"
#: src/history.c:283
#, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"無法建立 %s 目錄:%s\n"
"若要儲存/載入搜尋記錄或游標位置,則必須建立此目錄。\n"
#: src/history.c:290
#, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路徑 %s 不是但必須是個目錄。\n"
"Nano 將無法載入或儲存搜尋記錄或游標位置\n"
#: src/history.c:380 src/history.c:389 src/history.c:471 src/history.c:493
#, c-format
msgid "Error writing %s: %s\n"
msgstr "寫入 %s 時發生錯誤: %s\n"
#: src/nano.c:465
msgid "Key is invalid in view mode"
msgstr "在檢視模式中,此按鍵無效。"
#: src/nano.c:471
msgid "This function is disabled in restricted mode"
msgstr "這功能已在受限模式中停用"
#: src/nano.c:479
msgid "Help is not available"
msgstr "無法使用輔助說明"
#: src/nano.c:590
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"
#: src/nano.c:592
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"緩衝區未寫入至 %s%s\n"
#: src/nano.c:595
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"緩衝區未寫入:%s\n"
#: src/nano.c:694
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [選項] [[+行碼[,欄碼]] 檔名]…\n"
"\n"
#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:697
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename. The column number can be added after a comma.\n"
msgstr ""
"若要將游標放在檔案的指定行中,請在檔案名稱前加上「+行碼」。\n"
"可在「+行碼」加個逗號後加上要前往的欄碼。\n"
#: src/nano.c:699
#, c-format
msgid ""
"When a filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""
"當檔案名稱為「-」Nano 將從標準輸入讀取資料\n"
"\n"
#. TRANSLATORS: The next three are column headers of the --help output.
#: src/nano.c:701
msgid "Option"
msgstr "選項"
#: src/nano.c:701
msgid "Long option"
msgstr "長選項"
#: src/nano.c:701
msgid "Meaning"
msgstr "意義"
#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output. Try to keep them at most 40 characters.
#: src/nano.c:705
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵"
#: src/nano.c:707
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"
#: src/nano.c:708
msgid "-C <dir>"
msgstr "-C <目錄>"
#: src/nano.c:708
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目錄>"
#: src/nano.c:709
msgid "Directory for saving unique backup files"
msgstr "用來儲存唯一備份檔案的目錄"
#: src/nano.c:712
msgid "Use bold instead of reverse video text"
msgstr "使用粗體而非反白顯示文字"
#: src/nano.c:714
msgid "Convert typed tabs to spaces"
msgstr "將輸入的 Tab 符號轉換成空白字元"
#: src/nano.c:719
msgid "Read a file into a new buffer by default"
msgstr "預設將檔案讀取至新緩衝區"
#: src/nano.c:722
msgid "Use (vim-style) lock files"
msgstr "使用vim 形式的)鎖定檔案"
#: src/nano.c:727
msgid "Log & read search/replace string history"
msgstr "記錄並讀取「搜尋/取代」的字串歷史記錄"
#: src/nano.c:730
msgid "Don't look at nanorc files"
msgstr "請勿讀取 nanorc 檔案"
#: src/nano.c:734
msgid "Show a guiding bar at this column"
msgstr "在此欄顯示指引欄"
#: src/nano.c:737
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字按鍵區混淆的問題"
#: src/nano.c:740
msgid "Don't add an automatic newline"
msgstr "不加上自動換行"
#: src/nano.c:744
msgid "Trim tail spaces when hard-wrapping"
msgstr "當使用實際折行時裁掉尾端空白"
#: src/nano.c:748
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"
#: src/nano.c:753
msgid "Log & read location of cursor position"
msgstr "記錄 & 讀取游標所在位置"
#: src/nano.c:756
msgid "-Q <regex>"
msgstr "-Q <正規表示式>"
#: src/nano.c:756
msgid "--quotestr=<regex>"
msgstr "--quotestr=<正規表示式>"
#: src/nano.c:757
msgid "Regular expression to match quoting"
msgstr "括號中用來尋找符合文字的正規表示式"
#: src/nano.c:760
msgid "Restricted mode"
msgstr "受限模式"
#: src/nano.c:761
msgid "-T <#cols>"
msgstr "-T <#行>"
#: src/nano.c:761
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#行>"
#: src/nano.c:762
msgid "Set width of a tab to #cols columns"
msgstr "設定 Tab 寬度為 #行"
#: src/nano.c:763
msgid "Do quick statusbar blanking"
msgstr "將狀態列快速清空"
#: src/nano.c:764
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"
#: src/nano.c:767
msgid "Detect word boundaries more accurately"
msgstr "使偵測單字邊界更準確"
#: src/nano.c:768
msgid "-X <str>"
msgstr "-X <字串>"
#: src/nano.c:768
msgid "--wordchars=<str>"
msgstr "--wordchars=<字串>"
#: src/nano.c:769
msgid "Which other characters are word parts"
msgstr "哪些其他字元是單字的一部份"
#: src/nano.c:773
msgid "-Y <name>"
msgstr "-Y <名稱>"
#: src/nano.c:773
msgid "--syntax=<name>"
msgstr "--syntax=<名稱>"
#: src/nano.c:774
msgid "Syntax definition to use for coloring"
msgstr "用於上色的語法定義"
#: src/nano.c:777
msgid "Let Bsp and Del erase a marked region"
msgstr "使用 Bsp 和 Del 清除選取區塊"
#: src/nano.c:778
msgid "When soft-wrapping, do it at whitespace"
msgstr "當使用軟換行,請在空白處進行請在空白字元所在處進行虛擬換行"
#: src/nano.c:781
msgid "Automatically hard-wrap overlong lines"
msgstr "自動實際折過長行"
#: src/nano.c:783
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"
#: src/nano.c:785
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 Backspace 和 Delete 鍵的混淆問題"
#: src/nano.c:786
msgid "Keep the line below the title bar empty"
msgstr "保留標題列下一行的空白"
#: src/nano.c:789
msgid "Show cursor in file browser & help text"
msgstr "在檔案瀏覽器和輔助說明中顯示游標"
#: src/nano.c:791
msgid "Show this help text and exit"
msgstr "顯示這份說明文字並退出"
#: src/nano.c:793
msgid "Automatically indent new lines"
msgstr "自動縮排新行"
#: src/nano.c:795
msgid "Scroll per half-screen, not per line"
msgstr "一次捲動半個螢幕而非一行"
#: src/nano.c:797
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"
#: src/nano.c:800
msgid "Show line numbers in front of the text"
msgstr "在文字前顯示行碼"
#: src/nano.c:803
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"
#: src/nano.c:805
msgid "Do not read the file (only write it)"
msgstr "請勿讀取此檔案(僅寫入檔案)"
#: src/nano.c:807
msgid "-o <dir>"
msgstr "-o <目錄>"
#: src/nano.c:807
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目錄>"
#: src/nano.c:808
msgid "Set operating directory"
msgstr "設定操作目錄"
#: src/nano.c:810
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"
#: src/nano.c:812
msgid "-r <#cols>"
msgstr "-r <#欄數>"
#: src/nano.c:812
msgid "--fill=<#cols>"
msgstr "--fill=<#欄數>"
#: src/nano.c:813
msgid "Set width for hard-wrap and justify"
msgstr "設定實際折行的寬度並對齊"
#: src/nano.c:817
msgid "-s <prog>"
msgstr "-s <程式>"
#: src/nano.c:817
msgid "--speller=<prog>"
msgstr "--speller=<程式>"
#: src/nano.c:818
msgid "Enable alternate speller"
msgstr "啟用替代的拼字檢查程式"
#: src/nano.c:820
msgid "Auto save on exit, don't prompt"
msgstr "退出時不經提示自動儲存"
#: src/nano.c:822
msgid "Save a file by default in Unix format"
msgstr "預設以 Unix 格式儲存檔案"
#: src/nano.c:824
msgid "View mode (read-only)"
msgstr "檢視模式(唯讀)"
#: src/nano.c:826
msgid "Don't hard-wrap long lines [default]"
msgstr "不實際折過長行 [預設]"
#: src/nano.c:828
msgid "Don't show the two help lines"
msgstr "請勿顯示兩說明行"
#: src/nano.c:830
msgid "Make Ctrl+Right stop at word ends"
msgstr "讓 Ctrl + 方向右鍵 停在單詞尾端"
#: src/nano.c:833
msgid "Enable suspension"
msgstr "開啟暫停功能"
#: src/nano.c:835
msgid "Enable soft line wrapping"
msgstr "開啟虛擬折行功能"
#: src/nano.c:847
#, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano版本 %s\n"
#: src/nano.c:850
#, c-format
msgid " (C) 2014-%s the contributors to nano\n"
msgstr " (C) 2014-%s Nano 貢獻者\n"
#: src/nano.c:851
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
msgstr " 電子郵件nano@nano-editor.org\t網頁https://nano-editor.org/"
#: src/nano.c:852
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 編譯選項:"
#: src/nano.c:995
msgid "No file name"
msgstr "沒有檔案名稱"
#: src/nano.c:997
msgid "Save modified buffer? "
msgstr "儲存修改過的緩衝區?"
#: src/nano.c:1066
msgid "Could not reconnect stdin to keyboard\n"
msgstr "無法將 stdin 重新連結至鍵盤\n"
#: src/nano.c:1087
#, c-format
msgid "Reading data from keyboard; type ^D or ^D^D to finish.\n"
msgstr "正在從鍵盤讀取資料;輸入 ^D 或 ^D^D 結束。\n"
#: src/nano.c:1097
#, c-format
msgid "Failed to open stdin: %s"
msgstr "無法開啟標準輸入:%s"
#: src/nano.c:1181
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"
#: src/nano.c:1188
#, c-format
msgid "Sorry! Nano crashed! Code: %d. Please report a bug.\n"
msgstr "抱歉Nano 當掉了!錯誤代碼:%d。請回報此臭蟲。\n"
#: src/nano.c:1204
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "請使用「fg」回到 nano。\n"
#: src/nano.c:1225
msgid "Suspension is not enabled"
msgstr "尚未啟用暫停功能"
#: src/nano.c:1374
msgid "enabled"
msgstr "啟用"
#: src/nano.c:1374
msgid "disabled"
msgstr "停用"
#: src/nano.c:1525
msgid "Unbound key"
msgstr "按鍵未綁定"
#: src/nano.c:1528
msgid "Unbindable key: M-["
msgstr "按鍵未綁定M-["
#: src/nano.c:1530
#, c-format
msgid "Unbound key: M-%c"
msgstr "按鍵未綁定M-%c"
#: src/nano.c:1532
msgid "Unbindable key: ^["
msgstr "無法綁定按鍵:^["
#: src/nano.c:1534
#, c-format
msgid "Unbound key: ^%c"
msgstr "按鍵未指定:^%c"
#: src/nano.c:1536
#, c-format
msgid "Unbound key: %c"
msgstr "按鍵未綁定:%c"
#: src/nano.c:2086 src/rcfile.c:1204
#, c-format
msgid "Guide column \"%s\" is invalid"
msgstr "指引欄「%s」無效"
#: src/nano.c:2110 src/nano.c:2129
#, c-format
msgid "Option %s is ignored; it is the default\n"
msgstr "已忽略 %s 選項;該選項為預設值\n"
#: src/nano.c:2135 src/rcfile.c:1260
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所請求的 Tab 寬度「%s」無效"
#: src/nano.c:2224 src/rcfile.c:1195
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所請求的填充長度「%s」無效"
#: src/nano.c:2271
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr "輸入「%s -h」顯示可用的選項列表。\n"
#: src/nano.c:2456
#, c-format
msgid "Bad quoting regex \"%s\": %s\n"
msgstr "引號中的正規表示式「%s」無效%s\n"
#: src/nano.c:2590 src/search.c:782
msgid "Invalid line or column number"
msgstr "行碼或欄碼無效"
#: src/nano.c:2641
#, c-format
msgid "Mistakes in '%s'"
msgstr "「%s」中發現錯誤"
#: src/nano.c:2647
msgid "Welcome to nano. For basic help, type Ctrl+G."
msgstr "歡迎使用 nano。請按 Ctrl+G 取得基本使用說明。"
#. TRANSLATORS: For the next three strings, specify the starting letters
#. * of the translations for "Yes"/"No"/"All". The first letter of each of
#. * these strings MUST be a single-byte letter; others may be multi-byte.
#: src/prompt.c:656
msgid "Yy"
msgstr "Yy"
#: src/prompt.c:657
msgid "Nn"
msgstr "Nn"
#: src/prompt.c:658
msgid "Aa"
msgstr "Aa"
#: src/prompt.c:682
msgid "Yes"
msgstr "是"
#: src/prompt.c:686
msgid "No"
msgstr "否"
#: src/prompt.c:691
msgid "All"
msgstr "全部"
#: src/rcfile.c:181
#, c-format
msgid "Error in %s on line %zu: "
msgstr "在 %s (位於第 %zu 行) 中發生錯誤:"
#: src/rcfile.c:230
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 '%s' 有未封閉的 \""
#: src/rcfile.c:255 src/rcfile.c:757 src/rcfile.c:804 src/rcfile.c:880
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"
#: src/rcfile.c:280 src/search.c:44
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "正規表示式「%s」無效: %s"
#: src/rcfile.c:302
msgid "Missing syntax name"
msgstr "遺失語法名稱"
#: src/rcfile.c:310
msgid "Unpaired quote in syntax name"
msgstr "語法名稱中發現不成對引號"
#: src/rcfile.c:322
msgid "The \"none\" syntax is reserved"
msgstr "「none」語法被保留"
#: src/rcfile.c:351
msgid "The \"default\" syntax does not accept extensions"
msgstr "「default」語法不允許副檔名"
#: src/rcfile.c:366
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "語法「%s」無顏色指令"
#: src/rcfile.c:396
msgid "Missing key name"
msgstr "遺失按鍵名稱"
#: src/rcfile.c:405 src/rcfile.c:416
msgid "Key name is too short"
msgstr "按鍵名稱過短"
#: src/rcfile.c:426
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "按鍵名稱必須以 \"^\", \"M\", 或 \"F\" 開頭"
#: src/rcfile.c:429
#, c-format
msgid "Key name %s is invalid"
msgstr "按鍵名稱 %s 無效"
#: src/rcfile.c:438
msgid "Must specify a function to bind the key to"
msgstr "必須指定按鍵所繫結的功能"
#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:449
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr "必須指定一個選單或「all」所有以綁定 / 取消綁定按鍵"
#: src/rcfile.c:468
#, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "無法將名稱「%s」映射到某一功能"
#: src/rcfile.c:475
#, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "無法名稱「%s」映射到某一選單"
#: src/rcfile.c:508
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr "功能「%s」不存在於選單「%s」"
#: src/rcfile.c:519
#, c-format
msgid "Keystroke %s may not be rebound"
msgstr "不能綁定按鍵輸入「%s」"
#: src/rcfile.c:606 src/rcfile.c:1108
#, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識「%s」指令"
#: src/rcfile.c:639
#, c-format
msgid "Error expanding %s: %s"
msgstr "展開 %s 時發生錯誤: %s"
#: src/rcfile.c:679
#, c-format
msgid "Color \"%s\" not understood"
msgstr "未知顏色「%s」"
#: src/rcfile.c:695
msgid "A background color cannot be bright"
msgstr "背景顏色不能太亮"
#: src/rcfile.c:727
msgid "Missing color name"
msgstr "缺少顏色名稱"
#: src/rcfile.c:737 src/rcfile.c:864
#, c-format
msgid "Missing regex string after '%s' command"
msgstr "在「%s」指令之後缺少正規表示式字串"
#: src/rcfile.c:768 src/rcfile.c:814
msgid "Empty regex string"
msgstr "正規表示式字串為空"
#: src/rcfile.c:798
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""
#: src/rcfile.c:853 src/rcfile.c:1088
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr "「%s」指令需要前置的 'syntax' 指令"
#: src/rcfile.c:859
#, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "「default」語法不允許「%s」正規表示式"
#: src/rcfile.c:911
#, c-format
msgid "Missing argument after '%s'"
msgstr "缺少「%s」之後的參數"
#: src/rcfile.c:921
#, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "引數 '%s' 缺少閉合用的 \""
#: src/rcfile.c:968
#, c-format
msgid "No key is bound to function '%s' in menu '%s'. Exiting.\n"
msgstr "沒有按鍵綁定到「%2$s」目錄中的「%1$s」功能。正在退出。\n"
#: src/rcfile.c:971
#, c-format
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "假如需要,使用 nano 的 -I 選項來調整您的 nanorc 設定。\n"
#: src/rcfile.c:1034
#, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "未找到要展開的語法「%s」"
#: src/rcfile.c:1079
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "指令「%s」在包含的檔案中不允許"
#: src/rcfile.c:1116
msgid "Missing option"
msgstr "缺少選項"
#: src/rcfile.c:1130
#, c-format
msgid "Unknown option \"%s\""
msgstr "選項「%s」未知"
#: src/rcfile.c:1145
#, c-format
msgid "Cannot unset option \"%s\""
msgstr "無法取消設定選項「%s」"
#: src/rcfile.c:1150
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項「%s」需要參數"
#: src/rcfile.c:1164
msgid "Argument is not a valid multibyte string"
msgstr "參數非有效的多位元字串"
#: src/rcfile.c:1210 src/rcfile.c:1231 src/rcfile.c:1237
msgid "Non-blank characters required"
msgstr "需要非空格字元"
#: src/rcfile.c:1213
msgid "Even number of characters required"
msgstr "需要偶數字元"
#: src/rcfile.c:1219
msgid "Two single-column characters required"
msgstr "需要兩個單欄字元"
#: src/rcfile.c:1321
msgid "I can't find my home directory! Wah!"
msgstr "找不到家目錄!哇!"
#. TRANSLATORS: The next five modify the search prompt.
#: src/search.c:102
msgid " [Case Sensitive]"
msgstr " [區分大小寫]"
#: src/search.c:103
msgid " [Regexp]"
msgstr " [正規表示式]"
#: src/search.c:107
msgid " (to replace) in selection"
msgstr " 在選取區塊中(替換)"
#: src/search.c:109
msgid " (to replace)"
msgstr " (替換)"
#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:218
msgid "Searching..."
msgstr "搜尋中…"
#: src/search.c:387
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到「%.*s%s」"
#. TRANSLATORS: This is a prompt.
#: src/search.c:580
msgid "Replace this instance?"
msgstr "取代這個?"
#. TRANSLATORS: This is a prompt.
#: src/search.c:702
msgid "Replace with"
msgstr "以此取代"
#: src/search.c:733
#, c-format
msgid "Replaced %zd occurrence"
msgid_plural "Replaced %zd occurrences"
msgstr[0] "已取代 %zd 處"
#. TRANSLATORS: This is a prompt.
#: src/search.c:761
msgid "Enter line number, column number"
msgstr "輸入行碼和欄碼"
#: src/search.c:938
msgid "Not a bracket"
msgstr "非括號"
#: src/search.c:981
msgid "No matching bracket"
msgstr "無對應括號"
#: src/text.c:52
msgid "Mark Set"
msgstr "設定標記"
#: src/text.c:56
msgid "Mark Unset"
msgstr "取消設定標記"
#: src/text.c:67
#, c-format
msgid "Error invoking \"%s\""
msgstr "呼叫「%s」時發生錯誤"
#: src/text.c:385
msgid "Commenting is not supported for this file type"
msgstr "此檔案類型不支援備註功能"
#: src/text.c:395
msgid "Cannot comment past end of file"
msgstr "無法在檔案結尾新增備註"
#: src/text.c:522
msgid "Nothing to undo"
msgstr "沒有可以復原的變更"
#. TRANSLATORS: The next thirteen strings describe actions
#. * that are undone or redone. They are all nouns, not verbs.
#: src/text.c:534 src/text.c:600 src/text.c:700 src/text.c:764
msgid "addition"
msgstr "新增"
#: src/text.c:545 src/text.c:712
msgid "line break"
msgstr "分行符號"
#: src/text.c:557 src/text.c:725
msgid "deletion"
msgstr "刪除模式"
#: src/text.c:567 src/text.c:734
msgid "line join"
msgstr "行連結"
#: src/text.c:586 src/text.c:749
msgid "replacement"
msgstr "取代模式"
#: src/text.c:604 src/text.c:768
msgid "erasure"
msgstr "擦除"
#. TRANSLATORS: Remember: these are nouns, NOT verbs.
#: src/text.c:610 src/text.c:773
msgid "cut"
msgstr "剪下"
#: src/text.c:614 src/text.c:777
msgid "paste"
msgstr "貼上"
#: src/text.c:618 src/text.c:781
msgid "insertion"
msgstr "插入"
#: src/text.c:641 src/text.c:799
msgid "indent"
msgstr "縮排"
#: src/text.c:645 src/text.c:803
msgid "unindent"
msgstr "移除縮排"
#: src/text.c:650 src/text.c:808
msgid "comment"
msgstr "備註"
#: src/text.c:654 src/text.c:812
msgid "uncomment"
msgstr "移除備註"
#: src/text.c:662
#, c-format
msgid "Undid %s"
msgstr "已復原 %s"
#: src/text.c:687
msgid "Nothing to redo"
msgstr "沒有可以重作的變更"
#: src/text.c:820
#, c-format
msgid "Redid %s"
msgstr "已重作 %s"
#: src/text.c:952 src/text.c:2313 src/text.c:2694
msgid "Could not create pipe"
msgstr "無法建立管線"
#: src/text.c:988 src/text.c:2402 src/text.c:2526 src/text.c:2731
msgid "Could not fork"
msgstr "無法 fork"
#: src/text.c:993
msgid "Executing..."
msgstr "執行中…"
#: src/text.c:1009 src/text.c:1054
msgid "filtering"
msgstr "正在篩選"
#: src/text.c:1048
#, c-format
msgid "Failed to open pipe: %s"
msgstr "無法開啟管線:%s"
#: src/text.c:1995 src/text.c:2113
msgid "justification"
msgstr "對齊"
#: src/text.c:2134
msgid "Justified selection"
msgstr "已對齊選取區域"
#: src/text.c:2138
msgid "Justified file"
msgstr "已對齊檔案"
#: src/text.c:2140
msgid "Justified paragraph"
msgstr "已對齊段落"
#: src/text.c:2234
#, c-format
msgid "Unfindable word: %s"
msgstr "單字無法搜尋:%s"
#: src/text.c:2250
msgid "Edit a replacement"
msgstr "編輯取代文字"
#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2263
msgid "Next word..."
msgstr "下一單字…"
#: src/text.c:2315
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立錯字列表,請稍候…"
#: src/text.c:2410 src/text.c:2740
msgid "Could not get size of pipe buffer"
msgstr "無法取得管線緩衝區的大小"
#: src/text.c:2469
msgid "Error invoking \"uniq\""
msgstr "呼叫「uniq」時發生錯誤"
#: src/text.c:2472
msgid "Error invoking \"sort -f\""
msgstr "呼叫「sort -f」時發生錯誤"
#: src/text.c:2475
msgid "Error invoking \"spell\""
msgstr "呼叫「spell」時發生錯誤"
#: src/text.c:2645
#, c-format
msgid "%s: %s"
msgstr "%s%s"
#: src/text.c:2647
msgid "Finished checking spelling"
msgstr "拼字檢查完成"
#: src/text.c:2673
msgid "No linter defined for this type of file!"
msgstr "未定義此類型檔案的 Linter"
#: src/text.c:2683
msgid "Save modified buffer before linting?"
msgstr "在 Lint 之前儲存已修改過的緩衝區?"
#: src/text.c:2700
msgid "Invoking linter, please wait"
msgstr "正在呼叫 linter請稍候"
#: src/text.c:2836
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr "在指令中取得 0 個可解析的行:%s"
#: src/text.c:2874
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr "這個訊息關於未開啟的檔案 %s是否在新緩衝區開啟此檔"
#: src/text.c:2913
msgid "No messages for this file"
msgstr "沒有此檔案的訊息"
#: src/text.c:2960
msgid "At first message"
msgstr "第一則訊息"
#: src/text.c:2969
msgid "At last message"
msgstr "最近的訊息"
#: src/text.c:3046
#, c-format
msgid "%sWords: %zu Lines: %zd Chars: %zu"
msgstr "%s字數%zu 行:%zd 位元組:%zu"
#: src/text.c:3047
msgid "In Selection: "
msgstr "於選取區塊:"
#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3060
msgid "Verbatim Input"
msgstr "原形輸入"
#: src/text.c:3157
msgid "No word fragment"
msgstr "未找到單詞片段"
#: src/text.c:3249
msgid "No further matches"
msgstr "未找到其他符合項目"
#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3253
msgid "No matches"
msgstr "未找到符合項目"
#: src/utils.c:297 src/utils.c:309
msgid "Nano is out of memory!\n"
msgstr "nano 已用盡記憶體!\n"
#: src/winio.c:89
msgid "Recording a macro..."
msgstr "正在錄製巨集…"
#: src/winio.c:92
msgid "Stopped recording"
msgstr "停止錄製"
#: src/winio.c:103
msgid "Cannot run macro while recording"
msgstr "無法在錄製時執行巨集"
#: src/winio.c:109
msgid "Macro is empty"
msgstr "巨集為空"
#: src/winio.c:210
msgid "Too many errors from stdin\n"
msgstr "過多來自標準輸入的錯誤\n"
#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not recognize.
#: src/winio.c:1355
msgid "Unknown sequence"
msgstr "序列未知"
#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1494
#, c-format
msgid "Unicode Input: %s"
msgstr "萬國碼 Unicode 輸入:%s"
#. TRANSLATORS: The next five are "labels" in the title bar.
#: src/winio.c:2095
msgid "Linting --"
msgstr "Lint 中 --"
#: src/winio.c:2101
msgid "DIR:"
msgstr "目錄:"
#: src/winio.c:2122 src/winio.c:2128
msgid "Modified"
msgstr "已變更"
#: src/winio.c:2124
msgid "View"
msgstr "檢視"
#: src/winio.c:2126
msgid "Restricted"
msgstr "受限模式"
#: src/winio.c:2254
msgid "Further warnings were suppressed"
msgstr "已隱藏更多錯誤"
#: src/winio.c:3440
#, c-format
msgid "line %zd/%zd (%d%%), col %zu/%zu (%d%%), char %zu/%zu (%d%%)"
msgstr "列 %zd/%zd (%d%%), 行 %zu/%zu (%d%%), 字元 %zu/%zu (%d%%)"
#: src/winio.c:3632
msgid "The nano text editor"
msgstr "nano 文字編輯器"
#: src/winio.c:3633
msgid "version"
msgstr "版本"
#: src/winio.c:3634
msgid "Brought to you by:"
msgstr "來自於:"
#: src/winio.c:3635
msgid "Special thanks to:"
msgstr "特別感謝:"
#: src/winio.c:3636
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"
#: src/winio.c:3637
msgid "the many translators and the TP"
msgstr "許多的翻譯者與 TP"
#: src/winio.c:3638
msgid "For ncurses:"
msgstr "ncurses 部分:"
#: src/winio.c:3639
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人…"
#: src/winio.c:3640
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"
#: lib/getopt.c:278
#, c-format
msgid "%s: option '%s%s' is ambiguous\n"
msgstr "%s「%s%s」選項不明確\n"
#: lib/getopt.c:284
#, c-format
msgid "%s: option '%s%s' is ambiguous; possibilities:"
msgstr "%s「%s%s」選項不明確可能為"
#: lib/getopt.c:319
#, c-format
msgid "%s: unrecognized option '%s%s'\n"
msgstr "%s「%s%s」選項無法識別\n"
#: lib/getopt.c:345
#, c-format
msgid "%s: option '%s%s' doesn't allow an argument\n"
msgstr ""
"%s「%s%s」選項不允許參數\n"
"\n"
#: lib/getopt.c:360
#, c-format
msgid "%s: option '%s%s' requires an argument\n"
msgstr "%s「%s%s」選項需要參數\n"
#: lib/getopt.c:621
#, c-format
msgid "%s: invalid option -- '%c'\n"
msgstr "%s選項無效 -- '%c'\n"
#: lib/getopt.c:636 lib/getopt.c:682
#, c-format
msgid "%s: option requires an argument -- '%c'\n"
msgstr "%s選項需要參數 -- '%c'\n"
#: lib/regcomp.c:135
msgid "Success"
msgstr "成功"
#: lib/regcomp.c:138
msgid "No match"
msgstr "無符合項目"
#: lib/regcomp.c:141
msgid "Invalid regular expression"
msgstr "正規表示式無效"
#: lib/regcomp.c:144
msgid "Invalid collation character"
msgstr "定序字元無效"
#: lib/regcomp.c:147
msgid "Invalid character class name"
msgstr "字元類別名稱無效"
#: lib/regcomp.c:150
msgid "Trailing backslash"
msgstr "結尾出現斜線"
#: lib/regcomp.c:153
msgid "Invalid back reference"
msgstr "反向參考無效"
#: lib/regcomp.c:156
msgid "Unmatched [, [^, [:, [., or [="
msgstr "不對稱的 [、[^、[:、[. 或 [="
#: lib/regcomp.c:159
msgid "Unmatched ( or \\("
msgstr "不對稱的 ( 或 \\("
#: lib/regcomp.c:162
msgid "Unmatched \\{"
msgstr "不對稱的 \\{"
#: lib/regcomp.c:165
msgid "Invalid content of \\{\\}"
msgstr "\\{\\} 中內容無效"
#: lib/regcomp.c:168
msgid "Invalid range end"
msgstr "範圍結尾無效"
#: lib/regcomp.c:171
msgid "Memory exhausted"
msgstr "記憶體耗盡"
#: lib/regcomp.c:174
msgid "Invalid preceding regular expression"
msgstr "前置正規表示式無效"
#: lib/regcomp.c:177
msgid "Premature end of regular expression"
msgstr "正規表示式過早結束"
#: lib/regcomp.c:180
msgid "Regular expression too big"
msgstr "正規表示式過長"
#: lib/regcomp.c:183
msgid "Unmatched ) or \\)"
msgstr "不對稱的 ) 或 \\)"
#: lib/regcomp.c:676
msgid "No previous regular expression"
msgstr "沒有前一個正規表示式"