smol/po/zh_CN.po

2300 lines
56 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Simplified Chinese Messages for the nano editor
# Copyright (C) 2004, 2005, 2009, 2010, 2011 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009.
# Aron Xu <happyaron.xu@gmail.com>, 2009, 2010, 2011.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.3.0\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-07-17 11:17-0400\n"
"PO-Revision-Date: 2011-03-08 03:15+0800\n"
"Last-Translator: Aron Xu <happyaron.xu@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#. TRANSLATORS: This is a prompt.
#: src/browser.c:203
msgid "Go To Directory"
msgstr "跳至目录"
#: src/browser.c:214 src/browser.c:771 src/files.c:1083 src/files.c:2305
#: src/nano.c:1160 src/search.c:213 src/search.c:303 src/search.c:964
#: src/search.c:1040 src/text.c:2953 src/text.c:3167
msgid "Cancelled"
msgstr "已取消"
#: src/browser.c:246 src/browser.c:293
#, c-format
msgid "Can't go outside of %s in restricted mode"
msgstr "在限制模式中无法跳至%s 外部"
#: src/browser.c:257 src/browser.c:303 src/browser.c:324 src/files.c:947
#: src/files.c:956 src/files.c:1785 src/files.c:1912 src/files.c:1966
#: src/files.c:1987 src/files.c:2110 src/files.c:3012 src/files.c:3208
#: src/rcfile.c:585 src/rcfile.c:1394
#, c-format
msgid "Error reading %s: %s"
msgstr "读取%s 出错:%s"
#: src/browser.c:283
msgid "Can't move up a directory"
msgstr "无法上移一个目录"
#. TRANSLATORS: Try to keep this at most 7
#. * characters.
#: src/browser.c:627 src/browser.c:636
msgid "(dir)"
msgstr "(目录)"
#. TRANSLATORS: Try to keep this at most 12
#. * characters.
#: src/browser.c:633
msgid "(parent dir)"
msgstr "(父目录)"
#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:760 src/search.c:182
msgid "Search"
msgstr "搜索"
#: src/browser.c:813 src/search.c:384
msgid "Search Wrapped"
msgstr "已从头搜索"
#: src/browser.c:886 src/browser.c:913 src/search.c:503 src/search.c:506
#: src/search.c:563 src/search.c:566
msgid "This is the only occurrence"
msgstr "这是惟一出现之处"
#: src/browser.c:916 src/search.c:572
msgid "No current search pattern"
msgstr "没有当前搜索模式"
#: src/files.c:138
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr ""
#: src/files.c:144
#, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr ""
#: src/files.c:170 src/files.c:207 src/files.c:217
#, fuzzy, c-format
msgid "Error writing lock file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:232
#, fuzzy, c-format
msgid "Error deleting lock file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:267
#, fuzzy, c-format
msgid "Error opening lock file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:277
#, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr ""
#: src/files.c:302
#, fuzzy, c-format
msgid "Error writing lock file: Directory '%s' doesn't exist"
msgstr "写入备份文件%s 出错:文件所有者不匹配"
#: src/files.c:332
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "无法插入%s 外部的文件"
#: src/files.c:441
msgid "No more open file buffers"
msgstr "无多余文件缓冲区可启用"
#: src/files.c:457
#, c-format
msgid "Switched to %s"
msgstr "切换至%s"
#: src/files.c:458 src/global.c:962 src/winio.c:2161
msgid "New Buffer"
msgstr "新缓冲区"
#: src/files.c:845
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式)"
#: src/files.c:850
#, c-format
msgid ""
"Read %lu line (Converted from DOS and Mac format - Warning: No write "
"permission)"
msgid_plural ""
"Read %lu lines (Converted from DOS and Mac format - Warning: No write "
"permission)"
msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式- 警告:无写入权限)"
#: src/files.c:856
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已读取%lu 行 (转换自Mac 格式)"
#: src/files.c:860
#, c-format
msgid ""
"Read %lu line (Converted from Mac format - Warning: No write permission)"
msgid_plural ""
"Read %lu lines (Converted from Mac format - Warning: No write permission)"
msgstr[0] "已读取%lu 行 (转换自Mac 格式- 警告:无写入权限)"
#: src/files.c:866
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已读取%lu 行 (转换自DOS 格式)"
#: src/files.c:870
#, c-format
msgid ""
"Read %lu line (Converted from DOS format - Warning: No write permission)"
msgid_plural ""
"Read %lu lines (Converted from DOS format - Warning: No write permission)"
msgstr[0] "已读取%lu 行 (转换自DOS 格式- 警告:无写入权限)"
#: src/files.c:876
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已读取%lu 行"
#: src/files.c:879
#, c-format
msgid "Read %lu line ( Warning: No write permission)"
msgid_plural "Read %lu lines (Warning: No write permission)"
msgstr[0] "已读取%lu 行(警告:无写入权限)"
#: src/files.c:924 src/files.c:961
msgid "Reading File"
msgstr "正在读取文件"
#: src/files.c:931
msgid "New File"
msgstr "新文件"
#: src/files.c:934
#, c-format
msgid "\"%s\" not found"
msgstr "找不到\"%s\""
#: src/files.c:942 src/rcfile.c:578 src/rcfile.c:1344 src/rcfile.c:1385
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一个目录"
#: src/files.c:943 src/rcfile.c:579 src/rcfile.c:1345 src/rcfile.c:1386
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一个设备文件"
#: src/files.c:1042
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新缓冲区中执行的命令 [从%s] "
#: src/files.c:1044
#, c-format
msgid "Command to execute [from %s] "
msgstr "执行的命令 [从%s] "
#: src/files.c:1051
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "要插入新缓冲区的文件 [从%s] "
#: src/files.c:1053
#, c-format
msgid "File to insert [from %s] "
msgstr "要插入的文件 [从%s] "
#: src/files.c:1303
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重缓冲区模式中此按键无效"
#: src/files.c:1605
msgid "Failed to write backup file, continue saving? (Say N if unsure) "
msgstr "写入备份文件失败,继续保存吗?(如果不确定请输入N)"
#: src/files.c:1729
#, c-format
msgid "Can't write outside of %s"
msgstr "无法写入%s 外部"
#: src/files.c:1744
msgid "Cannot prepend or append to a symlink with --nofollow set"
msgstr "--nofollow 设定下,无法前引或附加至符号连结档"
#: src/files.c:1826 src/files.c:1851 src/files.c:1869 src/files.c:1882
#: src/files.c:1893 src/files.c:1922
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:1827 src/nano.c:719
msgid "Too many backup files?"
msgstr "太多备份文件?"
#: src/files.c:1942 src/files.c:1999 src/files.c:2018 src/files.c:2030
#: src/files.c:2054 src/files.c:2072 src/files.c:2082 src/files.c:2118
#: src/files.c:2123 src/files.c:3084 src/files.c:3093 src/files.c:3116
#: src/files.c:3128
#, c-format
msgid "Error writing %s: %s"
msgstr "写入%s 出错:%s"
#: src/files.c:1976 src/text.c:2870 src/text.c:2882
#, c-format
msgid "Error writing temp file: %s"
msgstr "写入临时文件%s 出错"
#: src/files.c:2156
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已写入%lu 行"
#: src/files.c:2262
msgid " [DOS Format]"
msgstr " [DOS 格式]"
#: src/files.c:2263
msgid " [Mac Format]"
msgstr " [Mac 格式]"
#: src/files.c:2265
msgid " [Backup]"
msgstr " [备份]"
#: src/files.c:2273
msgid "Prepend Selection to File"
msgstr "前引选择部份于文件"
#: src/files.c:2274
msgid "Append Selection to File"
msgstr "附加选择部份至文件"
#: src/files.c:2275
msgid "Write Selection to File"
msgstr "写入选择部份至文件"
#: src/files.c:2278
msgid "File Name to Prepend to"
msgstr "要前引于的文件名"
#: src/files.c:2279
msgid "File Name to Append to"
msgstr "要附加至的文件名"
#: src/files.c:2280
msgid "File Name to Write"
msgstr "要写入的文件名"
#: src/files.c:2410
msgid "File exists, OVERWRITE ? "
msgstr "文件已存在,要覆盖吗?"
#: src/files.c:2419
msgid "Save file under DIFFERENT NAME ? "
msgstr "以不同的名称存档?"
#: src/files.c:2433
msgid "File was modified since you opened it, continue saving ? "
msgstr "在您打开文件后文件已被改变,是否继续保存?"
#: src/files.c:2865
msgid "(more)"
msgstr "(更多)"
#: src/files.c:2957
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下回车键继续\n"
#: src/files.c:2972
#, fuzzy, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"无法创建目录 %s%s\n"
"然而保存和载入搜索历史或光标位置需要它。\n"
#: src/files.c:2978
#, fuzzy, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路径%s 应为一个目录,但现在不是。\n"
"Nano 将无法载入或保存搜索历史或光标位置\n"
#: src/files.c:2995
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I tried to move\n"
"to the preferred location (%s) but encountered an error: %s"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并试图移动到默认位置(%s)。\n"
"此操作出现错误:%s"
#: src/files.c:2999
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I moved\n"
"to the preferred location (%s)\n"
"(see the nano FAQ about this change)"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并已移动到默认位置(%s)。\n"
"(关于这个变更请参阅Nano 常见问题解答)"
#. TRANSLATORS: Try to keep the next four strings at most 10 characters.
#: src/global.c:489
msgid "Exit"
msgstr "离开"
#: src/global.c:490
msgid "Close"
msgstr "关闭"
#: src/global.c:491
#, fuzzy
msgid "Uncut Text"
msgstr "还原剪切"
#: src/global.c:493
#, fuzzy
msgid "Unjustify"
msgstr "还原对齐"
#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/global.c:497
msgid "WhereIs Next"
msgstr "何处是下一个"
#. TRANSLATORS: Try to keep the next eight strings at most 10 characters.
#: src/global.c:504
msgid "Where Is"
msgstr "搜索"
#: src/global.c:505
msgid "Replace"
msgstr "替换"
#: src/global.c:506
msgid "Go To Line"
msgstr "跳行"
#: src/global.c:507
msgid "Prev Line"
msgstr "上行"
#: src/global.c:508
msgid "Next Line"
msgstr "下行"
#: src/global.c:509
msgid "Read File"
msgstr "读档"
#: src/global.c:511
msgid "FullJstify"
msgstr "全部对齐"
#: src/global.c:513
msgid "Refresh"
msgstr "刷新"
#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:519
msgid "Justify the current paragraph"
msgstr "对齐当前段落"
#: src/global.c:521
msgid "Cancel the current function"
msgstr "取消当前功能"
#: src/global.c:522
msgid "Display this help text"
msgstr "显示帮助"
#: src/global.c:525
msgid "Close the current file buffer / Exit from nano"
msgstr "关闭当前文件缓冲区 / 离开 nano"
#: src/global.c:527
msgid "Exit from nano"
msgstr "离开 nano"
#: src/global.c:531
msgid "Write the current file to disk"
msgstr "写入当前文件至磁盘"
#: src/global.c:533
msgid "Insert another file into the current one"
msgstr "插入其他文件至当前文件"
#: src/global.c:535
msgid "Search for a string or a regular expression"
msgstr "查找字符串或正则表示式"
#: src/global.c:538
#, fuzzy
msgid "Search for a string"
msgstr "查找字符串或正则表示式"
#: src/global.c:540
#, fuzzy
msgid "Go one screenful up"
msgstr "跳至后一屏"
#: src/global.c:541
#, fuzzy
msgid "Go one screenful down"
msgstr "跳至后一屏"
#: src/global.c:543
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪切当前这行并存至剪贴板"
#: src/global.c:545
msgid "Uncut from the cutbuffer into the current line"
msgstr "从剪贴板粘贴至当前行"
#: src/global.c:546
msgid "Display the position of the cursor"
msgstr "显示光标位置"
#: src/global.c:548
msgid "Invoke the spell checker, if available"
msgstr "尝试运行拼写检查"
#: src/global.c:550
msgid "Replace a string or a regular expression"
msgstr "替换字符串或正则表示式"
#: src/global.c:551
msgid "Go to line and column number"
msgstr "跳至指定行与列位置"
#: src/global.c:553
#, fuzzy
msgid "Mark text starting from the cursor position"
msgstr "标记游标所在文字"
#: src/global.c:554
#, fuzzy
msgid "Repeat the last search"
msgstr "重复上次搜索"
#: src/global.c:556
msgid "Copy the current line and store it in the cutbuffer"
msgstr "拷贝当前行至剪贴板"
#: src/global.c:557
msgid "Indent the current line"
msgstr "缩进当前行"
#: src/global.c:558
msgid "Unindent the current line"
msgstr "取消缩进当前行"
#: src/global.c:559
msgid "Undo the last operation"
msgstr "撤销上次操作"
#: src/global.c:560
msgid "Redo the last undone operation"
msgstr "重做撤销的操作"
#: src/global.c:562
msgid "Go forward one character"
msgstr "向前跳一字符"
#: src/global.c:563
msgid "Go back one character"
msgstr "向后跳一字符"
#: src/global.c:565
msgid "Go forward one word"
msgstr "向前跳一个词"
#: src/global.c:566
msgid "Go back one word"
msgstr "向后跳一个词"
#: src/global.c:568
msgid "Go to previous line"
msgstr "跳至前一行"
#: src/global.c:569
msgid "Go to next line"
msgstr "跳至后一行"
#: src/global.c:570
msgid "Go to beginning of current line"
msgstr "跳至当前行首"
#: src/global.c:571
msgid "Go to end of current line"
msgstr "跳至当前行尾"
#: src/global.c:574
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至当前段落开头,如已在段落开头,则调至上一段落起始处"
#: src/global.c:576
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至当前段落结尾,如已在段落结尾,则调至下一段落结尾"
#: src/global.c:578
msgid "Go to the first line of the file"
msgstr "跳至文件第一行"
#: src/global.c:579
msgid "Go to the last line of the file"
msgstr "跳至文件最后一行"
#: src/global.c:581
msgid "Go to the matching bracket"
msgstr "移动至对应括号"
#: src/global.c:583
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上卷动一行但不卷动游标"
#: src/global.c:585
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下卷动一行但不卷动游标"
#: src/global.c:588
msgid "Switch to the previous file buffer"
msgstr "切换至上个文件缓冲区"
#: src/global.c:589
msgid "Switch to the next file buffer"
msgstr "切换至下个文件缓冲区"
#: src/global.c:591
msgid "Insert the next keystroke verbatim"
msgstr "插入下一按键原型"
#: src/global.c:592
msgid "Insert a tab at the cursor position"
msgstr "插入制表符于游标位置"
#: src/global.c:593
msgid "Insert a newline at the cursor position"
msgstr "插入新行于游标位置"
#: src/global.c:594
msgid "Delete the character under the cursor"
msgstr "删除游标之下的字符"
#: src/global.c:596
msgid "Delete the character to the left of the cursor"
msgstr "删除游标左侧的字符"
#: src/global.c:599
msgid "Cut from the cursor position to the end of the file"
msgstr "从游标位置剪切至文件结尾"
#: src/global.c:602
msgid "Justify the entire file"
msgstr "对齐整个文件"
#: src/global.c:606
msgid "Count the number of words, lines, and characters"
msgstr "计算字数、行数与字符数"
#: src/global.c:609
msgid "Refresh (redraw) the current screen"
msgstr "重新显示当前画面"
#: src/global.c:611
msgid "Suspend the editor (if suspend is enabled)"
msgstr "暂停编辑器(如果启用了暂停)"
#: src/global.c:614
msgid "Toggle the case sensitivity of the search"
msgstr "切换查找的区分大小写选项"
#: src/global.c:616
msgid "Reverse the direction of the search"
msgstr "反转搜索方向"
#: src/global.c:620
msgid "Toggle the use of regular expressions"
msgstr "切换使用正则表示式"
#: src/global.c:624
msgid "Recall the previous search/replace string"
msgstr "编辑前次搜索/替换字符串"
#: src/global.c:626
msgid "Recall the next search/replace string"
msgstr "编辑下次搜索/替换字符串"
#: src/global.c:629
msgid "Go to file browser"
msgstr "打开文件选单"
#: src/global.c:632
msgid "Toggle the use of DOS format"
msgstr "切换使用DOS 格式"
#: src/global.c:633
msgid "Toggle the use of Mac format"
msgstr "切换使用Mac 格式"
#: src/global.c:634
msgid "Toggle appending"
msgstr "切换追加"
#: src/global.c:635
msgid "Toggle prepending"
msgstr "切换前置插入"
#: src/global.c:636
msgid "Toggle backing up of the original file"
msgstr "切换储存既有文件的备份"
#: src/global.c:637
msgid "Execute external command"
msgstr "执行外部命令"
#: src/global.c:640
msgid "Toggle the use of a new buffer"
msgstr "切换使用新缓冲区"
#: src/global.c:643
msgid "Exit from the file browser"
msgstr "从文件选单离开"
#: src/global.c:644
msgid "Go to the first file in the list"
msgstr "跳至文件第一列"
#: src/global.c:645
msgid "Go to the last file in the list"
msgstr "跳至文件最后一列"
#: src/global.c:646
msgid "Go to the previous file in the list"
msgstr "跳至列表中的前一个文件"
#: src/global.c:647
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一个文件"
#: src/global.c:648
msgid "Go to directory"
msgstr "跳至目录"
#: src/global.c:651
#, fuzzy
msgid "Invoke the linter, if available"
msgstr "尝试运行拼写检查"
#: src/global.c:652
#, fuzzy
msgid "Go to previous linter msg"
msgstr "跳至前一行"
#: src/global.c:653
#, fuzzy
msgid "Go to next linter msg"
msgstr "跳至后一行"
#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:673
msgid "Get Help"
msgstr "求助"
#: src/global.c:676 src/prompt.c:1089
msgid "Cancel"
msgstr "取消"
#: src/global.c:689
#, fuzzy
msgid "Write Out"
msgstr "写入"
#: src/global.c:715
msgid "Go To Dir"
msgstr "跳至目录"
#: src/global.c:730
msgid "Cut Text"
msgstr "剪切文字"
#: src/global.c:739
msgid "Justify"
msgstr "对齐"
#: src/global.c:744
msgid "To Spell"
msgstr "拼写检查"
#: src/global.c:749
#, fuzzy
msgid "To Linter"
msgstr "跳行"
#: src/global.c:754
msgid "Case Sens"
msgstr "区分大小写"
#: src/global.c:759
msgid "Regexp"
msgstr "正则表达式"
#: src/global.c:764
msgid "Backwards"
msgstr "向后搜索"
#: src/global.c:771
msgid "No Replace"
msgstr "不替换"
#: src/global.c:779
msgid "Cur Pos"
msgstr "游标位置"
#: src/global.c:789
msgid "Prev Page"
msgstr "上页"
#: src/global.c:791
msgid "Next Page"
msgstr "下页"
#: src/global.c:794
msgid "First Line"
msgstr "首行"
#: src/global.c:796
msgid "Last Line"
msgstr "尾行"
#: src/global.c:803
#, fuzzy
msgid "To Bracket"
msgstr "并非一个括号"
#: src/global.c:806
msgid "Mark Text"
msgstr "标记文字"
#: src/global.c:809
msgid "Copy Text"
msgstr "复制文字"
#: src/global.c:812
msgid "Indent Text"
msgstr "缩进文字"
#: src/global.c:814
msgid "Unindent Text"
msgstr "取消缩进"
#: src/global.c:817
msgid "Undo"
msgstr "撤销"
#: src/global.c:819
msgid "Redo"
msgstr "重做"
#: src/global.c:823 src/global.c:829
msgid "Back"
msgstr "向后"
#: src/global.c:825 src/global.c:831
msgid "Forward"
msgstr "向前"
#: src/global.c:836
msgid "Prev Word"
msgstr "前一个字"
#: src/global.c:838
msgid "Next Word"
msgstr "后一个字"
#: src/global.c:842
msgid "Home"
msgstr "顶端"
#: src/global.c:844
msgid "End"
msgstr "尾端"
#: src/global.c:853
msgid "Beg of Par"
msgstr "段落开头"
#: src/global.c:855
msgid "End of Par"
msgstr "段落结尾"
#: src/global.c:860
msgid "Scroll Up"
msgstr "向上卷动"
#: src/global.c:862
msgid "Scroll Down"
msgstr "向下卷动"
#: src/global.c:867
#, fuzzy
msgid "Prev File"
msgstr "上个文件"
#: src/global.c:869
msgid "Next File"
msgstr "下个文件"
#: src/global.c:878
#, fuzzy
msgid "Verbatim"
msgstr "原形输入"
#: src/global.c:881
msgid "Tab"
msgstr "制表符"
#: src/global.c:883
msgid "Enter"
msgstr "回车"
#: src/global.c:885
msgid "Delete"
msgstr "删除"
#: src/global.c:887
msgid "Backspace"
msgstr "退格"
#: src/global.c:897
msgid "CutTillEnd"
msgstr "删至末端"
#: src/global.c:907
msgid "Word Count"
msgstr "字数统计"
#: src/global.c:914
msgid "Suspend"
msgstr "暂停"
#: src/global.c:919
msgid "PrevHstory"
msgstr "前一记录"
#: src/global.c:922
msgid "NextHstory"
msgstr "后一记录"
#: src/global.c:926
msgid "Go To Text"
msgstr "跳至文字"
#: src/global.c:937
msgid "DOS Format"
msgstr "DOS 格式"
#: src/global.c:940
msgid "Mac Format"
msgstr "Mac 格式"
#: src/global.c:943
msgid "Append"
msgstr "附加"
#: src/global.c:945
msgid "Prepend"
msgstr "前引"
#: src/global.c:948
msgid "Backup File"
msgstr "备份文件"
#: src/global.c:955
msgid "Execute Command"
msgstr "执行命令"
#: src/global.c:970
msgid "To Files"
msgstr "文件选单"
#: src/global.c:973
msgid "First File"
msgstr "首文件"
#: src/global.c:975
msgid "Last File"
msgstr "末文件"
#: src/global.c:986
#, fuzzy
msgid "Prev Lint Msg"
msgstr "上行"
#: src/global.c:988
#, fuzzy
msgid "Next Lint Msg"
msgstr "下行"
#. TRANSLATORS: The next seventeen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1227
msgid "Help mode"
msgstr "辅助模式"
#: src/global.c:1229
msgid "Constant cursor position display"
msgstr "持续显示游标位置"
#: src/global.c:1231
msgid "Use of one more line for editing"
msgstr "编辑时使用多一行"
#: src/global.c:1233
msgid "Smooth scrolling"
msgstr "平滑式卷动画面"
#: src/global.c:1235
#, fuzzy
msgid "Soft wrapping of overlong lines"
msgstr "不要自动换行"
#: src/global.c:1237
msgid "Whitespace display"
msgstr "显示空格"
#: src/global.c:1239
msgid "Color syntax highlighting"
msgstr "语法色彩高亮"
#: src/global.c:1241
msgid "Smart home key"
msgstr "智能HOME 键"
#: src/global.c:1243
msgid "Auto indent"
msgstr "自动缩进"
#: src/global.c:1245
msgid "Cut to end"
msgstr "剪切至行尾"
#: src/global.c:1247
#, fuzzy
msgid "Hard wrapping of overlong lines"
msgstr "不要自动换行"
#: src/global.c:1249
msgid "Conversion of typed tabs to spaces"
msgstr "已输入制表符至空白的转换"
#: src/global.c:1251
msgid "Backup files"
msgstr "备份文件"
#: src/global.c:1253
msgid "Multiple file buffers"
msgstr "多重文件缓冲区"
#: src/global.c:1255
msgid "Mouse support"
msgstr "鼠标支持"
#: src/global.c:1257
msgid "No conversion from DOS/Mac format"
msgstr "不从 DOS/Mac 格式转换"
#: src/global.c:1259
msgid "Suspension"
msgstr "暂停"
#: src/help.c:205
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search. "
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符,然后按下回车键。如果存在着符合您所输入的文"
"字,画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
"最近一次搜索的字符串将会显示在搜索提示符后的括号中。不输入任何文字而直接按下"
"回车键则会重复使用最近一次的搜索条件。"
#: src/help.c:214
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已经用标记选择了一段文字并进行搜索替换,就只有在选择文字中符合者将会被"
"替换。\n"
"\n"
" 以下的功能键可用于搜索模式:\n"
"\n"
#: src/help.c:220
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter. If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳行辅助说明\n"
"\n"
" 首先输入您想去的行数编号并按下回车键。如果文章中的行数比您所输入少,您将会被"
"带至文件的最后一行。\n"
"\n"
" 以下的功能键可用于跳行模式:\n"
"\n"
#: src/help.c:229
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers). "
msgstr ""
"插入文件辅助说明\n"
"\n"
" 先把文件的名称键入,它将会插入在当前缓冲区的游标所在之处。\n"
"\n"
" 如果您所编译的 nano 支持多重文件缓冲区,并且将此功能以命令列旗标-F 或--"
"multibuffer、Meta-F 开关,或者 nanorc 文件来启动的话,所插入的文件 将会被载入"
"另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。 "
#: src/help.c:238
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一个空的缓冲区,那就不要输入任何文件名,或是在提示符号后键入一个"
"不存在的文件名,然后按下回车键。\n"
"\n"
" 以下的功能键可用于插入文件模式:\n"
"\n"
#: src/help.c:244
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file. To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"写入文件辅助说明\n"
"\n"
" 先键入您想要以此来储存当前文件的名称,并按下回车键来储存文件。\n"
"\n"
" 如果已经用标记选择了文字,那么您将会被提示,只储存标记部份到另外的档案。为了"
"降低当前文件只被其中部份覆盖的机会,在此模式下,当前的文件名不会成为默认"
"值。\n"
"\n"
" 以下的功能键可用于写入文件模式:\n"
"\n"
#: src/help.c:258
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing. You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory. To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"文件选单辅助说明\n"
"\n"
" 文件选单是用来视觉化浏览目录结构,以选取要读出或写入的文件。您可以 使用上下"
"左右键或上页/下页来浏览并用S 或回车键来选取所要的文件或者进入所选的目录。要"
"跳到上层时,选择在文件列表顶端名为 \"..\" 的目录。\n"
"\n"
" 以下的功能键可用于文件选单:\n"
"\n"
#: src/help.c:271
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符,然后按下回车键。如果存在著 符合您所输入的"
"文字,画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
" 最近一次搜索的字符串将会显示在搜索提示符号后面的括号中。不输入任何文字而直接"
"按下回车键则会重复最近一次的搜索条件。\n"
"\n"
#: src/help.c:280
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
"在搜索模式可使用如下的功能键:\n"
"\n"
#: src/help.c:284
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目录辅助说明\n"
"\n"
" 先输入您想要浏览的目录名称。\n"
"\n"
" 如果制表符补全的功能没有被关闭,您可以利用制表符(尝试)自动补全目录名称。\n"
"\n"
" 以下的功能键可用于跳至目录模式:\n"
"\n"
#: src/help.c:297
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file. "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited. It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼写检查辅助说明\n"
"\n"
" 拼写检查程序会检查当前文件中所有文字的拼法。当遇到一个未知的字,它会 被标记"
"起来,并让您编辑替代文字。对于当前文件中每一个拼错的字,都会显示 替换的提示;"
"或者,如果已经用标记选择了文字的话,那就只作用于选取的文字之中。\n"
"\n"
" 以下的功能键可用于拼写检查模式:\n"
"\n"
#: src/help.c:312
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode). If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"执行命令辅助说明\n"
"\n"
" 本选单允许您将shell 执行的命令输出结果,插入当前的缓冲区(或是多重缓冲区模式"
"下的新缓冲区)。如果您需要另一个空白缓冲区,就不要输入任何命令。\n"
"\n"
" 以下的功能键可用于执行命令模式:\n"
"\n"
#: src/help.c:325
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor. There are four main sections of the editor. The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified. Next is the main editor window "
"showing the file being edited. The status line is the third line from the "
"bottom and shows important messages. "
msgstr ""
"nano 辅助说明\n"
"\n"
" nano 编辑器是设计来在功能性及易用性方面模仿华盛顿大学的Pico 文字编辑器。它"
"包括四个主要部份:顶行显示程序版本、当前被编辑的文件名, 以及是否这文件已经更"
"动过。接着是主要编辑区,显示正在编辑的文件。状态行位于倒数第三行,用来显示重"
"要的信息。底部的两行则显示编辑器中最常用到的快捷键。\n"
"\n"
" "
#: src/help.c:335
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" The notation for shortcuts is as follows: Control-key sequences are notated "
"with a caret (^) symbol and can be entered either by using the Control "
"(Ctrl) key or pressing the Escape (Esc) key twice. Escape-key sequences are "
"notated with the Meta (M-) symbol and can be entered using either the Esc, "
"Alt, or Meta key depending on your keyboard setup. "
msgstr ""
"快捷键的记号定义如下:控制键组(Control-key) 序列是以一个 \"帽子\" (caret, ^)"
"符号来表示它可以通过Ctrl键或是按两次Esc 键来输入。脱离键组(Escape-key) 序列"
"是以\"中介\" (Meta, M) 符号表示它可以依照您的键盘设定利用EscAlt 或Meta "
"来输入。"
#: src/help.c:344
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value. The "
"following keystrokes are available in the main editor window. Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外按Esc 两次之后再键入从000 到255 之间的三位数字则会输入该ASCII 码对应"
"的字符。下列按键组合可用于主要编辑区,替代按键则显示于括号内“\n"
"\n"
#: src/help.c:376 src/help.c:448
msgid "enable/disable"
msgstr "启用/关闭"
#: src/nano.c:601
msgid "Key invalid in view mode"
msgstr "观看模式中此按键无效"
#: src/nano.c:713
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"缓冲内容已写入 %s\n"
#: src/nano.c:715
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"缓冲内容未写入至 %s%s\n"
#: src/nano.c:718
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"缓冲区未写入:%s\n"
#: src/nano.c:743
msgid "Window size is too small for nano...\n"
msgstr "窗口尺寸对 nano 来说太小了...\n"
#: src/nano.c:836
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n"
"\n"
msgstr ""
"用法: nano [选项] [[+行,列] 文件名]...\n"
"\n"
#: src/nano.c:839
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "选项\t\tGNU 长选项\t\t意义\n"
#: src/nano.c:841
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "选项\t\t意义\n"
#: src/nano.c:844
msgid "+LINE,COLUMN"
msgstr "+行,列"
#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output. Try to keep them at most 40 characters.
#: src/nano.c:847
msgid "Start at line LINE, column COLUMN"
msgstr "从所指列数与行数开始"
#: src/nano.c:849
msgid "Enable smart home key"
msgstr "启用智能 HOME 键"
#: src/nano.c:850
msgid "Save backups of existing files"
msgstr "储存既有文件的备份"
#: src/nano.c:851
msgid "-C <dir>"
msgstr "-C <目录>"
#: src/nano.c:851
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目录>"
#: src/nano.c:852
msgid "Directory for saving unique backup files"
msgstr "用以储存独一备份文件的目录"
#: src/nano.c:855
msgid "Use bold instead of reverse video text"
msgstr "用粗体替代颜色反转"
#: src/nano.c:858
msgid "Convert typed tabs to spaces"
msgstr "将已输入的制表符转换为空白"
#: src/nano.c:861
msgid "Enable multiple file buffers"
msgstr "启用多重文件缓冲区功能"
#: src/nano.c:865
msgid "Use (vim-style) lock files"
msgstr ""
#: src/nano.c:869
msgid "Log & read search/replace string history"
msgstr "记录与读取搜索/替换的历史字符串"
#: src/nano.c:873
msgid "Don't look at nanorc files"
msgstr "不要参考nanorc 文件"
#: src/nano.c:876
msgid "Fix numeric keypad key confusion problem"
msgstr "修正数字键区按键混淆问题"
#: src/nano.c:878
msgid "Don't add newlines to the ends of files"
msgstr "不要将换行加到文件末端"
#: src/nano.c:881
msgid "Don't convert files from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"
#: src/nano.c:883
msgid "Use one more line for editing"
msgstr "编辑时多使用一行"
#: src/nano.c:886
msgid "Log & read location of cursor position"
msgstr "记录并读取光标位置"
#: src/nano.c:889
msgid "-Q <str>"
msgstr "-Q <字符串>"
#: src/nano.c:889
msgid "--quotestr=<str>"
msgstr "--quotestr=<字符串>"
#: src/nano.c:890
msgid "Quoting string"
msgstr "引用代表字符串"
#: src/nano.c:892
msgid "Restricted mode"
msgstr "限制模式"
#: src/nano.c:895
msgid "Scroll by line instead of half-screen"
msgstr "按行滚动而不是半屏"
#: src/nano.c:897
msgid "-T <#cols>"
msgstr "-T <#列数>"
#: src/nano.c:897
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#列数>"
#: src/nano.c:898
msgid "Set width of a tab to #cols columns"
msgstr "设定制表符宽度为 #列数"
#: src/nano.c:900
msgid "Do quick statusbar blanking"
msgstr "状态行快速闪动"
#: src/nano.c:903
msgid "Print version information and exit"
msgstr "显示版本资讯并离开"
#: src/nano.c:906
msgid "Detect word boundaries more accurately"
msgstr "更正确地侦测单字边界"
#: src/nano.c:909
msgid "-Y <str>"
msgstr "-Y <字符串>"
#: src/nano.c:909
msgid "--syntax=<str>"
msgstr "--syntax=<字符串>"
#: src/nano.c:910
msgid "Syntax definition to use for coloring"
msgstr "用于加亮的语法定义"
#: src/nano.c:912
msgid "Constantly show cursor position"
msgstr "持续显示游标位置"
#: src/nano.c:914
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正退格键/删除键混淆问题"
#: src/nano.c:915
#, fuzzy
msgid "Show this help text"
msgstr "显示帮助"
#: src/nano.c:918
msgid "Automatically indent new lines"
msgstr "自动缩进新行"
#: src/nano.c:919
msgid "Cut from cursor to end of line"
msgstr "从游标剪切至行尾"
#: src/nano.c:922
msgid "Don't follow symbolic links, overwrite"
msgstr "不要依照符号连结,而是覆盖"
#: src/nano.c:924
msgid "Enable the use of the mouse"
msgstr "启用鼠标功能"
#: src/nano.c:926
msgid "Do not read the file (only write it)"
msgstr ""
#: src/nano.c:928
msgid "-o <dir>"
msgstr "-o <目录>"
#: src/nano.c:928
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目录>"
#: src/nano.c:929
msgid "Set operating directory"
msgstr "设定操作目录"
#: src/nano.c:932
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留XON (^Q) 和XOFF (^S) 按键"
#: src/nano.c:935
msgid "Silently ignore startup issues like rc file errors"
msgstr "沉默忽略启动问题, 比如rc 文件错误"
#: src/nano.c:938
msgid "-r <#cols>"
msgstr "-r <#列数>"
#: src/nano.c:938
msgid "--fill=<#cols>"
msgstr "--fill=<#列数>"
#: src/nano.c:939
#, fuzzy
msgid "Set hard-wrapping point at column #cols"
msgstr "设定折行宽度为 #列数"
#: src/nano.c:942
msgid "-s <prog>"
msgstr "-s <程序>"
#: src/nano.c:942
msgid "--speller=<prog>"
msgstr "--speller=<程序>"
#: src/nano.c:943
msgid "Enable alternate speller"
msgstr "启用替代的拼写检查程序"
#: src/nano.c:946
msgid "Auto save on exit, don't prompt"
msgstr "离开时自动储存,不要提示"
#: src/nano.c:947
msgid "View mode (read-only)"
msgstr "查看(只读)模式"
#: src/nano.c:949
#, fuzzy
msgid "Don't hard-wrap long lines"
msgstr "不要自动换行"
#: src/nano.c:951
msgid "Don't show the two help lines"
msgstr "不要显示辅助区"
#: src/nano.c:952
msgid "Enable suspension"
msgstr "启用暂停功能"
#: src/nano.c:954
msgid "Enable soft line wrapping"
msgstr "启用软换行"
#: src/nano.c:963
#, c-format
msgid " GNU nano version %s (compiled %s, %s)\n"
msgstr " GNU nano 版本%s (编译于%s, %s)\n"
#: src/nano.c:967
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/"
msgstr " 电子邮件: nano@nano-editor.org\t\t网页: http://www.nano-editor.org/"
#: src/nano.c:968
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 编译选项:"
#: src/nano.c:1097
msgid "Sorry, support for this function has been disabled"
msgstr "对不起,此功能的支持以禁用"
#: src/nano.c:1126
msgid "No file name"
msgstr ""
#: src/nano.c:1137
msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
msgstr "储存更动过的缓冲区吗(回答 \"No\" 会撤销修改)"
#: src/nano.c:1190
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "对不起,无法从键盘设备重新打开标准输入\n"
#: src/nano.c:1215
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "正在从标准输入读入,可用 ^C 中断\n"
#: src/nano.c:1281
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到SIGHUP 或SIGTERM\n"
#: src/nano.c:1303
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "使用\"fg\" 返回nano\n"
#: src/nano.c:1483
msgid "enabled"
msgstr "已启用"
#: src/nano.c:1483
msgid "disabled"
msgstr "已禁用"
#: src/nano.c:1637 src/winio.c:1283
msgid "Unknown Command"
msgstr "未知命令"
#: src/nano.c:1749
msgid "XON ignored, mumble mumble"
msgstr "忽略XON嗯嗯。"
#: src/nano.c:1754
msgid "XOFF ignored, mumble mumble"
msgstr "忽略XOFF嗯嗯。"
#: src/nano.c:2312 src/rcfile.c:1293
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的制表符宽度%s 无效"
#: src/nano.c:2376 src/rcfile.c:1218
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填满行数\"%s\" 无效"
#: src/nano.c:2417
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr ""
#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy" for "Oui".
#: src/prompt.c:1060
msgid "Yy"
msgstr "Yy"
#: src/prompt.c:1061
msgid "Nn"
msgstr "Nn"
#: src/prompt.c:1062
msgid "Aa"
msgstr "Aa"
#: src/prompt.c:1076
msgid "Yes"
msgstr "是"
#: src/prompt.c:1081
msgid "All"
msgstr "全部"
#: src/prompt.c:1086
msgid "No"
msgstr "否"
#: src/rcfile.c:137
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在%s(第%lu 行)中发生错误:"
#: src/rcfile.c:196
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "参数%s 有未封闭的 \""
#: src/rcfile.c:223 src/rcfile.c:275 src/rcfile.c:725 src/rcfile.c:786
#: src/rcfile.c:875 src/rcfile.c:927
msgid "Regex strings must begin and end with a \" character"
msgstr "正则表示式字符串必须以 \" 字符开始及结束"
#: src/rcfile.c:249 src/search.c:62
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "非法的正则表示式 \"%s\": %s"
#: src/rcfile.c:269
msgid "Missing syntax name"
msgstr "缺少语法名称"
#: src/rcfile.c:339
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 语法已被保留"
#: src/rcfile.c:346
msgid "The \"default\" syntax must take no extensions"
msgstr "\"default\" 语法必须不含任何副文件名"
#: src/rcfile.c:432
msgid "Missing key name"
msgstr "缺少键名称"
#: src/rcfile.c:441 src/rcfile.c:452
msgid "Key name is too short"
msgstr ""
#: src/rcfile.c:462
#, fuzzy
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "键绑定必须以\"^\", \"M\" 或 \"F\" 开始"
#: src/rcfile.c:471
#, fuzzy
msgid "Must specify a function to bind the key to"
msgstr "必须指定键绑定到的函数"
#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:481
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr ""
#: src/rcfile.c:488
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "无法映射名字\"%s\" 到一个函数"
#: src/rcfile.c:495
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "无法映射名字\"%s\" 到一个菜单"
#: src/rcfile.c:523
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr ""
#: src/rcfile.c:538
#, fuzzy, c-format
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "对不起,键\"%s\" 属非法绑定"
#: src/rcfile.c:624
#, fuzzy, c-format
msgid "Error expanding %s: %s"
msgstr "读取%s 出错:%s"
#: src/rcfile.c:667
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"颜色 %s 无法识别。\n"
"有效的颜色是 \"green\"(绿)、\"red\"(红)、\"blue\"(蓝)、\n"
"\"white\"(白)、\"yellow\"(黄)、\"cyan\"(青)、\"magenta\"(瑰)和\n"
"\"black\"(黑),选择性的前置字 \"bright\"(明亮) \n"
"可用于前景色。"
#: src/rcfile.c:689
msgid "Cannot add a color command without a syntax command"
msgstr "无法直接增加颜色而没有语法行"
#: src/rcfile.c:694
msgid "Missing color name"
msgstr "缺少颜色名称"
#: src/rcfile.c:704 src/rcfile.c:865
msgid "Missing regex string"
msgstr "缺少正则表示式字符串"
#: src/rcfile.c:780
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求对应的\"end=\""
#: src/rcfile.c:832
#, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色%s 不可为明亮"
#: src/rcfile.c:860
msgid "Cannot add a header regex without a syntax command"
msgstr "无法直接增加头部正则表达式而没有语法行"
#: src/rcfile.c:916
msgid "Cannot add a magic string regex without a syntax command"
msgstr "无法在没有语法命令的情况下添加魔字符串"
#: src/rcfile.c:921
msgid "Missing magic string name"
msgstr "缺少魔字符串名称"
#: src/rcfile.c:980
#, fuzzy
msgid "Cannot add a linter without a syntax command"
msgstr "无法直接增加头部正则表达式而没有语法行"
#: src/rcfile.c:985
#, fuzzy
msgid "Missing linter command"
msgstr "缺少颜色名称"
#: src/rcfile.c:1015
#, fuzzy, c-format
msgid "Fatal error: no keys mapped for function \"%s\". Exiting.\n"
msgstr "严重错误; 没有键映射到函数 \"%s\""
#: src/rcfile.c:1017
#, fuzzy, c-format
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "正在退出。如果您想调整您的nanorc 设置请使用nano 的-I 选项。\n"
#: src/rcfile.c:1078
#, fuzzy, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "无法映射名字\"%s\" 到一个菜单"
#: src/rcfile.c:1094 src/rcfile.c:1103 src/rcfile.c:1113
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令\"%s\" 被禁止在包含文件中使用"
#: src/rcfile.c:1119 src/rcfile.c:1318
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "语法\"%s\" 没有color 命令"
#: src/rcfile.c:1139
#, c-format
msgid "Command \"%s\" not understood"
msgstr "无法识别\"%s\" 命令"
#: src/rcfile.c:1154
#, fuzzy
msgid "Missing option"
msgstr "缺少颜色名称"
#: src/rcfile.c:1176
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "选项%s 需要参数"
#: src/rcfile.c:1194
msgid "Option is not a valid multibyte string"
msgstr "选项并非正确的多字节字符串"
#: src/rcfile.c:1231 src/rcfile.c:1259 src/rcfile.c:1268
msgid "Non-blank characters required"
msgstr "需要非空格字符"
#: src/rcfile.c:1241
msgid "Two single-column characters required"
msgstr "需要两个单行字符"
#: src/rcfile.c:1307
#, fuzzy, c-format
msgid "Cannot unset option \"%s\""
msgstr "无法解除旗标 %s 设定"
#: src/rcfile.c:1313
#, fuzzy, c-format
msgid "Unknown option \"%s\""
msgstr "未知旗标 %s"
#: src/rcfile.c:1372
msgid "I can't find my home directory! Wah!"
msgstr "我找不到我的家目录!哇!"
#: src/rcfile.c:1410
#, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下回车键继续启动 nano\n"
#: src/search.c:96
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""
#. TRANSLATORS: The next three strings are modifiers of the search prompt.
#: src/search.c:185
msgid " [Case Sensitive]"
msgstr " [区分大小写]"
#: src/search.c:189
msgid " [Regexp]"
msgstr " [正则表示式]"
#: src/search.c:193
msgid " [Backwards]"
msgstr " [向后搜索]"
#. TRANSLATORS: The next two strings are modifiers of the search prompt.
#: src/search.c:198
msgid " (to replace) in selection"
msgstr " 在标记中(替换)"
#: src/search.c:200
msgid " (to replace)"
msgstr " (替换)"
#. TRANSLATORS: This is a prompt.
#: src/search.c:774
msgid "Replace this instance?"
msgstr "替换这个?"
#. TRANSLATORS: This is a prompt.
#: src/search.c:951
msgid "Replace with"
msgstr "替换我"
#: src/search.c:993
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已替换%lu 处"
#. TRANSLATORS: This is a prompt.
#: src/search.c:1034
msgid "Enter line number, column number"
msgstr "输入列号,行号"
#: src/search.c:1061
msgid "Invalid line or column number"
msgstr "无效的列号或行号"
#: src/search.c:1215
msgid "Not a bracket"
msgstr "并非一个括号"
#: src/search.c:1282
msgid "No matching bracket"
msgstr "无对应括号"
#: src/text.c:54
msgid "Mark Set"
msgstr "标记设定"
#: src/text.c:58
msgid "Mark Unset"
msgstr "标记解除"
#: src/text.c:439
msgid "Nothing in undo buffer!"
msgstr "没有可撤销的操作!"
#: src/text.c:445
#, fuzzy, c-format
msgid "Internal error: can't match line %ld. Please save your work."
msgstr "内部错误:无法匹配行 %d。请保存您的工作"
#: src/text.c:456 src/text.c:487 src/text.c:600 src/text.c:637
msgid "text add"
msgstr "文字增加"
#: src/text.c:467 src/text.c:612
msgid "text delete"
msgstr "文本删除"
#: src/text.c:491 src/text.c:641
msgid "line join"
msgstr "行合并"
#: src/text.c:505 src/text.c:657
msgid "text cut"
msgstr "文字剪切"
#: src/text.c:510 src/text.c:661
msgid "text uncut"
msgstr "取消剪切"
#: src/text.c:515 src/text.c:623
msgid "line break"
msgstr "换行符"
#: src/text.c:528 src/text.c:672
msgid "text insert"
msgstr "文本插入"
#: src/text.c:549 src/text.c:665
msgid "text replace"
msgstr "文本替换"
#: src/text.c:556 src/text.c:679 src/text.c:983
msgid "Internal error: unknown type. Please save your work."
msgstr "内部错误:未知类型。请保存您的工作。"
#: src/text.c:561
#, c-format
msgid "Undid action (%s)"
msgstr "已撤销操作(%s)"
#: src/text.c:580
msgid "Nothing to re-do!"
msgstr "没有可重做的操作!"
#: src/text.c:584
#, fuzzy
msgid "Internal error: cannot set up redo. Please save your work."
msgstr "内部错误:无法配置取消剪切。请保存您的工作"
#: src/text.c:590
#, fuzzy, c-format
msgid "Internal error: can't match line %d. Please save your work."
msgstr "内部错误:无法匹配行 %d。请保存您的工作"
#: src/text.c:684
#, c-format
msgid "Redid action (%s)"
msgstr "已重做操作(%s)"
#: src/text.c:785 src/text.c:2489 src/text.c:2967
msgid "Could not create pipe"
msgstr "无法建立管线功能"
#: src/text.c:811 src/text.c:2577 src/text.c:2729 src/text.c:3018
msgid "Could not fork"
msgstr "执行功能无效"
#: src/text.c:969
#, fuzzy
msgid "Internal error: cannot set up uncut. Please save your work."
msgstr "内部错误:无法配置取消剪切。请保存您的工作"
#: src/text.c:1806
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字符串%s%s"
#: src/text.c:2206
msgid "Can now UnJustify!"
msgstr "现在可以还原对齐!"
#: src/text.c:2403
msgid "Edit a replacement"
msgstr "编辑替代文字"
#: src/text.c:2491
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立错字列表,请稍待..."
#: src/text.c:2583 src/text.c:3026
msgid "Could not get size of pipe buffer"
msgstr "无法得知管线缓冲区大小"
#: src/text.c:2634
msgid "Error invoking \"spell\""
msgstr "运行 \"spell\" 错误"
#: src/text.c:2637
msgid "Error invoking \"sort -f\""
msgstr "运行 \"sort -f\" 错误"
#: src/text.c:2640
msgid "Error invoking \"uniq\""
msgstr "运行 \"uniq\" 错误"
#: src/text.c:2697 src/text.c:2910
msgid "Finished checking spelling"
msgstr "拼写检查结束"
#: src/text.c:2756
#, c-format
msgid "Error invoking \"%s\""
msgstr "运行 \"%s\" 错误"
#: src/text.c:2888
#, fuzzy
msgid "Invoking spell checker, please wait"
msgstr "尝试运行拼写检查"
#: src/text.c:2905
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼写检查失败:%s"
#: src/text.c:2907
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼写检查失败:%s%s"
#: src/text.c:2941
#, fuzzy
msgid "No linter defined for this type of file!"
msgstr "不要将换行加到文件末端"
#: src/text.c:2951
msgid "Save modified buffer before linting?"
msgstr ""
#: src/text.c:2973
msgid "Invoking linter, please wait"
msgstr ""
#: src/text.c:3129
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr ""
#: src/text.c:3162
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr ""
#: src/text.c:3210
#, fuzzy
msgid "At last message"
msgstr "显示此信息"
#: src/text.c:3217
#, fuzzy
msgid "At first message"
msgstr "显示此信息"
#: src/text.c:3296
#, c-format
msgid "%sWords: %lu Lines: %ld Chars: %lu"
msgstr "%s字数: %lu 行数: %ld 字符数: %lu"
#: src/text.c:3297
msgid "In Selection: "
msgstr "于选择部份:"
#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3311
msgid "Verbatim Input"
msgstr "原形输入"
#: src/utils.c:410 src/utils.c:422
msgid "nano is out of memory!"
msgstr "nano 已耗尽内存!"
#. TRANSLATORS: This is displayed during the input of a
#. * six-digit hexadecimal Unicode character code.
#: src/winio.c:1583
msgid "Unicode Input"
msgstr "Unicode 输入"
#: src/winio.c:2142 src/winio.c:2146
msgid "Modified"
msgstr "已更改"
#: src/winio.c:2143
msgid "View"
msgstr "查看"
#: src/winio.c:2157
msgid "DIR:"
msgstr "目录:"
#: src/winio.c:2164
msgid "File:"
msgstr "文件:"
#. TRANSLATORS: Try to keep this at most 76 characters.
#: src/winio.c:2261
msgid ""
"Warning: Modifying a file which is not locked, check directory permission?"
msgstr ""
#: src/winio.c:3376
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "行 %ld/%ld (%d%%),列 %lu/%lu (%d%%),字符 %lu/%lu (%d%%)"
#: src/winio.c:3509
msgid "The nano text editor"
msgstr "nano 文本编辑器"
#: src/winio.c:3510
msgid "version"
msgstr "版本"
#: src/winio.c:3511
msgid "Brought to you by:"
msgstr "来自于:"
#: src/winio.c:3512
msgid "Special thanks to:"
msgstr "特别感谢:"
#: src/winio.c:3513
msgid "The Free Software Foundation"
msgstr "自由软体基金会"
#: src/winio.c:3514
msgid "For ncurses:"
msgstr "ncurses 部份:"
#: src/winio.c:3515
msgid "and anyone else we forgot..."
msgstr "以及其他我们不记得的人..."
#: src/winio.c:3516
msgid "Thank you for using nano!"
msgstr "谢谢您使用 nano"
#~ msgid "Insert File"
#~ msgstr "插入文件"
#~ msgid "Go to previous screen"
#~ msgstr "跳至前一屏"
#~ msgid "Find Other Bracket"
#~ msgstr "寻找其他括号"
#~ msgid "Long line wrapping"
#~ msgstr "长行转换"
#~ msgid "Soft line wrapping"
#~ msgstr "软换行"
#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允许通用撤销[试验性特性]"
#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略为与Pico 相容)"
#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必须指定键绑定到的菜单(或 \"all\")"
#~ msgid "Missing flag"
#~ msgstr "缺少旗标"
#~ msgid "line wrap"
#~ msgstr "自动换行"
#~ msgid "Internal error: unknown type. Please save your work"
#~ msgstr "内部错误:未知类型。请保存您的工作"
#~ msgid "Internal error: Redo setup failed. Please save your work"
#~ msgstr "内部错误:重做设置失败。请保存您的工作"
#~ msgid "Could not pipe"
#~ msgstr "管线功能无效"
#~ msgid "line split"
#~ msgstr "行分割"