smol/po/zh_TW.po

2724 lines
67 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Traditional Chinese Messages for the nano editor.
# Copyright (C) 2004, 05 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# Wei-Lun Chao <bluebat@member.fsf.org>, 2004, 2005, 2013.
# pan93412 <pan93412@gmail.com>, 2018.
msgid ""
msgstr ""
"Project-Id-Version: GNU nano 2.9.5-pre1\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2018-05-15 09:11+0200\n"
"PO-Revision-Date: 2018-04-18 00:21+0800\n"
"Last-Translator: pan93412 <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Lokalize 2.0\n"
#: src/browser.c:67
#, c-format
msgid "Cannot open directory: %s"
msgstr "無法開啟目錄:%s"
#. TRANSLATORS: This is a prompt.
#: src/browser.c:230
msgid "Go To Directory"
msgstr "跳至目錄"
#: src/browser.c:233 src/browser.c:693 src/files.c:1074 src/files.c:2088
#: src/nano.c:1077 src/search.c:117 src/search.c:210 src/search.c:718
#: src/search.c:770 src/text.c:3033 src/text.c:3214
msgid "Cancelled"
msgstr "已取消"
#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:250 src/browser.c:281
#, c-format
msgid "Can't go outside of %s"
msgstr "無法超出 %s 範圍"
#: src/browser.c:272
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"
#: src/browser.c:287 src/files.c:965 src/files.c:971 src/files.c:1609
#: src/files.c:1726 src/files.c:1767 src/files.c:1787 src/files.c:1899
#: src/history.c:311 src/history.c:407 src/rcfile.c:537 src/rcfile.c:1223
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"
#: src/browser.c:371
msgid "The working directory has disappeared"
msgstr "目前的工作目錄已經消失"
#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:566 src/browser.c:573
msgid "(dir)"
msgstr "(目錄)"
#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:570
msgid "(parent dir)"
msgstr "(上層目錄)"
#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:600
msgid "(huge)"
msgstr "(huge)"
#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:684 src/search.c:103
msgid "Search"
msgstr "搜尋"
#: src/browser.c:723 src/browser.c:728 src/search.c:280
msgid "Search Wrapped"
msgstr "已從頭搜尋"
#: src/browser.c:739 src/search.c:415
msgid "This is the only occurrence"
msgstr "這是惟一出現之處"
#: src/browser.c:784 src/search.c:354
msgid "No current search pattern"
msgstr "沒有符合目前搜尋形式者"
#: src/color.c:183
#, c-format
msgid "Unknown syntax name: %s"
msgstr "未知的語法名稱:%s"
#: src/color.c:239
#, c-format
msgid "magic_load() failed: %s"
msgstr "magic_load() 錯誤:%s"
#: src/color.c:243
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr "magic_file(%s) 錯誤:%s"
#: src/files.c:45
#, c-format
msgid "Directory '%s' does not exist"
msgstr "目錄「%s」不存在"
#: src/files.c:47
#, c-format
msgid "Path '%s': %s"
msgstr "位置「%s」%s"
#: src/files.c:49
#, c-format
msgid "Path '%s' is not a directory"
msgstr "「%s」不是一個目錄"
#: src/files.c:51
#, c-format
msgid "Path '%s' is not accessible"
msgstr "位置「%s」無法存取"
#: src/files.c:53
#, c-format
msgid "Directory '%s' is not writable"
msgstr "目錄「%s」唯讀"
#. TRANSLATORS: Keep the next eight messages at most 76 characters.
#: src/files.c:186
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr "無法確認我的身分以用於鎖定檔案 (getpwuid() 失敗)"
#: src/files.c:195
#, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr "無法確認主機名稱以用於鎖定檔案:%s"
#: src/files.c:215 src/files.c:224 src/files.c:262 src/files.c:269
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "寫入鎖定檔案 %s 時發生錯誤:%s"
#: src/files.c:291
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "刪除鎖定檔案 %s 時發生錯誤:%s"
#: src/files.c:322
#, c-format
msgid "Error opening lock file %s: %s"
msgstr "開啟鎖定檔案 %s 時發生錯誤:%s"
#: src/files.c:336
#, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr "讀取鎖定檔案 %s 時發生錯誤:未讀取足夠的資料"
#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:355
#, c-format
msgid "File %s is being edited (by %s with %s, PID %s); continue?"
msgstr "檔案 %s 正在被編輯(來自 %s 與 %s、PID 為 %s繼續"
#: src/files.c:429
#, c-format
msgid "Can't read file from outside of %s"
msgstr "無法讀取 %s 外的檔案"
#: src/files.c:445 src/files.c:955 src/rcfile.c:516
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一個目錄"
#: src/files.c:447
#, c-format
msgid "\"%s\" is not a normal file"
msgstr "「%s」不是一個正常檔案"
#: src/files.c:594
msgid "No more open file buffers"
msgstr "無多餘檔案緩衝區可開啟"
#: src/files.c:619
#, c-format
msgid "Switched to %s"
msgstr "切換至 %s"
#: src/files.c:621 src/global.c:1035 src/winio.c:2047
msgid "New Buffer"
msgstr "新緩衝區"
#: src/files.c:886
#, c-format
msgid "File '%s' is unwritable"
msgstr "檔案「%s」唯讀"
#. TRANSLATORS: Keep the next four messages at most 78 characters.
#: src/files.c:890
#, c-format
msgid "Read %zu line (Converted from DOS and Mac format)"
msgid_plural "Read %zu lines (Converted from DOS and Mac format)"
msgstr[0] "已讀取 %zu 列 (轉檔自 DOS 與 Mac 格式)"
#: src/files.c:895
#, c-format
msgid "Read %zu line (Converted from Mac format)"
msgid_plural "Read %zu lines (Converted from Mac format)"
msgstr[0] "已讀取 %zu 列 (轉檔自 Mac 格式)"
#: src/files.c:900
#, c-format
msgid "Read %zu line (Converted from DOS format)"
msgid_plural "Read %zu lines (Converted from DOS format)"
msgstr[0] "已讀取 %zu 列 (轉檔自 DOS 格式)"
#: src/files.c:906
#, c-format
msgid "Read %zu line"
msgid_plural "Read %zu lines"
msgstr[0] "已讀取 %zu 列"
#: src/files.c:941
msgid "New File"
msgstr "新檔案"
#: src/files.c:946
#, c-format
msgid "File \"%s\" not found"
msgstr "找不到檔案「%s」"
#: src/files.c:956 src/rcfile.c:517
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一個裝置檔案"
#: src/files.c:974
msgid "Reading File"
msgstr "正在讀取檔案"
#. TRANSLATORS: The next four messages are prompts.
#: src/files.c:1040
msgid "Command to execute in new buffer"
msgstr "在新緩衝區中執行的命令"
#: src/files.c:1043
msgid "Command to execute"
msgstr "執行的命令 "
#: src/files.c:1049
#, c-format
msgid "File to insert into new buffer [from %s]"
msgstr "所要插入新緩衝區的檔案 [從 %s]"
#: src/files.c:1052
#, c-format
msgid "File to insert [from %s]"
msgstr "所要插入的檔案 [從 %s]"
#: src/files.c:1195
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重緩衝區模式中此按鍵無效"
#: src/files.c:1408
msgid "Invalid operating directory\n"
msgstr "無效的操作目錄\n"
#: src/files.c:1457
msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
msgstr "寫入備份檔案時失敗;要繼續儲存?(如果不確定就以 N 表示。) "
#: src/files.c:1474
msgid "Invalid backup directory\n"
msgstr "無效的備份目錄\n"
#: src/files.c:1567
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"
#: src/files.c:1645 src/files.c:1669 src/files.c:1687 src/files.c:1701
#: src/files.c:1713 src/files.c:1736
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤:%s"
#: src/files.c:1646 src/nano.c:656
msgid "Too many backup files?"
msgstr "太多備份檔案?"
#: src/files.c:1776 src/files.c:1798 src/help.c:55 src/help.c:122
#: src/text.c:2951 src/text.c:2969 src/text.c:3339 src/text.c:3350
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤"
#: src/files.c:1817 src/files.c:1827 src/files.c:1847 src/files.c:1864
#: src/files.c:1874 src/files.c:1906 src/files.c:1913
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"
#: src/files.c:1963
#, c-format
msgid "Wrote %zu line"
msgid_plural "Wrote %zu lines"
msgstr[0] "已寫入 %zu 列"
#: src/files.c:2048
msgid " [DOS Format]"
msgstr " [DOS 格式]"
#: src/files.c:2049
msgid " [Mac Format]"
msgstr " [Mac 格式]"
#: src/files.c:2050
msgid " [Backup]"
msgstr " [備份]"
#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2057
msgid "Prepend Selection to File"
msgstr "前引選擇部分於檔案"
#: src/files.c:2058
msgid "Append Selection to File"
msgstr "附加選擇部分至檔案"
#: src/files.c:2059
msgid "Write Selection to File"
msgstr "寫入選擇部分至檔案"
#: src/files.c:2061
msgid "File Name to Prepend to"
msgstr "要前引於的檔案名稱"
#: src/files.c:2062
msgid "File Name to Append to"
msgstr "要附加至的檔案名稱"
#: src/files.c:2065
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"
#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2174
msgid "File exists -- cannot overwrite"
msgstr "檔案已存在 -- 無法覆蓋"
#: src/files.c:2184
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同的名稱存檔?"
#: src/files.c:2192
#, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "檔案「%s」已存在要覆寫嗎"
#: src/files.c:2219
msgid "File on disk has changed"
msgstr "磁碟上的檔案已變更"
#: src/files.c:2221
msgid "File was modified since you opened it; continue saving? "
msgstr "檔案從您開啟它後已被修改;要繼續儲存?"
#: src/files.c:2641
msgid "(more)"
msgstr "(更多)"
#. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters.
#: src/global.c:490
msgid "Exit"
msgstr "離開"
#: src/global.c:491
msgid "Close"
msgstr "關閉"
#: src/global.c:492
msgid "Uncut Text"
msgstr "還原剪下文字"
#: src/global.c:494
msgid "Unjustify"
msgstr "還原對齊"
#: src/global.c:500
msgid "Read File"
msgstr "讀檔"
#: src/global.c:501
msgid "Where Is"
msgstr "搜尋"
#: src/global.c:502
msgid "Replace"
msgstr "置換"
#: src/global.c:503
msgid "Go To Line"
msgstr "跳列"
#: src/global.c:504
msgid "Prev Line"
msgstr "上列"
#: src/global.c:505
msgid "Next Line"
msgstr "下列"
#: src/global.c:506
msgid "Prev Page"
msgstr "上頁"
#: src/global.c:507
msgid "Next Page"
msgstr "下頁"
#: src/global.c:509
msgid "Justify"
msgstr "對齊"
#: src/global.c:510
msgid "FullJstify"
msgstr "全部對齊"
#: src/global.c:512
msgid "Refresh"
msgstr "重新顯示"
#. TRANSLATORS: Try to keep this string at most 12 characters.
#: src/global.c:514
msgid "WhereIs Next"
msgstr "下一個位置"
#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:519
msgid "Cancel the current function"
msgstr "取消目前功能"
#: src/global.c:520
msgid "Display this help text"
msgstr "顯示這份說明文字"
#: src/global.c:522
msgid "Close the current buffer / Exit from nano"
msgstr "關閉目前緩衝區 / 離開 nano"
#: src/global.c:524
msgid "Write the current buffer (or the marked region) to disk"
msgstr "寫入目前緩衝區(或者是已標記區域)至磁碟"
#: src/global.c:526
msgid "Insert another file into current buffer (or into new buffer)"
msgstr "插入其他檔案至目前緩衝區(或插入新的緩衝區)"
#: src/global.c:528
msgid "Search forward for a string or a regular expression"
msgstr "使用字串或正規表示式來向前搜尋"
#: src/global.c:530
msgid "Search backward for a string or a regular expression"
msgstr "使用字串或正規表示式來往回搜尋"
#: src/global.c:532
msgid "Search for a string"
msgstr "搜尋一個字串"
#: src/global.c:533
msgid "Refresh the file list"
msgstr "重新整理檔案列表"
#: src/global.c:535
msgid "Go to lefthand column"
msgstr "跳至左欄"
#: src/global.c:536
msgid "Go to righthand column"
msgstr "跳至右欄"
#: src/global.c:537
msgid "Go to first row in this column"
msgstr "跳至此欄中的第一行"
#: src/global.c:538
msgid "Go to last row in this column"
msgstr "跳至此欄中的最後一列"
#: src/global.c:541
msgid "Go one screenful up"
msgstr " 向上捲動一個畫面"
#: src/global.c:542
msgid "Go one screenful down"
msgstr "向下捲動一個畫面"
#: src/global.c:544
msgid "Cut current line (or marked region) and store it in cutbuffer"
msgstr "在剪貼板剪下目前的行(或選取的區域)並且儲存它"
#: src/global.c:546
msgid "Uncut from the cutbuffer into the current line"
msgstr "從剪貼簿還原至目前這列"
#: src/global.c:547
msgid "Display the position of the cursor"
msgstr "顯示游標位置"
#: src/global.c:549
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"
#: src/global.c:551
msgid "Replace a string or a regular expression"
msgstr "置換字串或正規表示式"
#: src/global.c:552
msgid "Go to line and column number"
msgstr "跳至指定列與行位置"
#: src/global.c:553
msgid "Repeat the last search"
msgstr "重覆上次搜尋"
#: src/global.c:555
msgid "Mark text starting from the cursor position"
msgstr "從游標開始標記文字"
#: src/global.c:557
msgid "Copy current line (or marked region) and store it in cutbuffer"
msgstr "剪下目前的列(或選取的區域)並存至剪貼簿"
#: src/global.c:558
msgid "Indent the current line (or marked lines)"
msgstr "縮排目前這列(或選取的區域)"
#: src/global.c:559
msgid "Unindent the current line (or marked lines)"
msgstr "取消目前這列(或選取的區域)的縮排"
#: src/global.c:560
msgid "Undo the last operation"
msgstr "復原上次的動作"
#: src/global.c:561
msgid "Redo the last undone operation"
msgstr "重做最後一筆已復原作業"
#: src/global.c:563
msgid "Go back one character"
msgstr "向後跳一字元"
#: src/global.c:564
msgid "Go forward one character"
msgstr "向前跳一字元"
#: src/global.c:565
msgid "Go back one word"
msgstr "向後跳一字詞"
#: src/global.c:566
msgid "Go forward one word"
msgstr "向前跳一字詞"
#: src/global.c:567
msgid "Go to previous line"
msgstr "跳至前一列"
#: src/global.c:568
msgid "Go to next line"
msgstr "跳至後一列"
#: src/global.c:569
msgid "Go to beginning of current line"
msgstr "跳至目前列首"
#: src/global.c:570
msgid "Go to end of current line"
msgstr "跳至目前列尾"
#: src/global.c:571
msgid "Go to previous block of text"
msgstr "跳至前一塊文字"
#: src/global.c:572
msgid "Go to next block of text"
msgstr "跳至後一塊文字"
#: src/global.c:575
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至目前段落開頭;然後是前一段落的開頭"
#: src/global.c:577
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至目前段落結尾;然後是後一段落的結尾"
#: src/global.c:579
msgid "Go to the first line of the file"
msgstr "跳至檔案第一列"
#: src/global.c:580
msgid "Go to the last line of the file"
msgstr "跳至檔案最後一列"
#: src/global.c:582
msgid "Go to the matching bracket"
msgstr "跳至對應的括號"
#: src/global.c:586
msgid "Scroll up one line without moving the cursor textually"
msgstr "向上捲動一列而不捲動文字上的游標"
#: src/global.c:588
msgid "Scroll down one line without moving the cursor textually"
msgstr "向下捲動一列而不捲動文字上的游標"
#: src/global.c:591
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"
#: src/global.c:592
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"
#: src/global.c:594
msgid "Insert the next keystroke verbatim"
msgstr "插入下個按鍵的原形"
#: src/global.c:595
msgid "Insert a tab at the cursor position"
msgstr "插入跳格字元於游標位置"
#: src/global.c:596
msgid "Insert a newline at the cursor position"
msgstr "插入換列字元於游標位置"
#: src/global.c:597
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"
#: src/global.c:599
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"
#: src/global.c:602
msgid "Cut backward from cursor to word start"
msgstr "從游標向後剪下至字的開頭"
#: src/global.c:604
msgid "Cut forward from cursor to next word start"
msgstr "從游標向前剪下至下個字的開頭"
#: src/global.c:606
msgid "Cut from the cursor position to the end of the file"
msgstr "從游標位置剪下至檔案結尾"
#: src/global.c:609
msgid "Justify the current paragraph"
msgstr "對齊目前段落"
#: src/global.c:610
msgid "Justify the entire file"
msgstr "對齊整個檔案"
#: src/global.c:614
msgid "Count the number of words, lines, and characters"
msgstr "計算字數、列數與字元數"
#: src/global.c:617
msgid "Refresh (redraw) the current screen"
msgstr "重新顯示目前畫面"
#: src/global.c:619
msgid "Suspend the editor (if suspension is enabled)"
msgstr "懸置編輯器 (如果懸置已啟用)"
#: src/global.c:621
msgid "Try and complete the current word"
msgstr "嘗試完成目前的單字"
#: src/global.c:625
msgid "Comment/uncomment the current line (or marked lines)"
msgstr "註解 / 取消註解目前的列(或標記的列)"
#: src/global.c:627
msgid "Save file without prompting"
msgstr "儲存檔案而不經確認"
#: src/global.c:629
msgid "Search next occurrence backward"
msgstr "向後搜尋下一個結果"
#: src/global.c:630
msgid "Search next occurrence forward"
msgstr "向前搜尋下一個結果"
#: src/global.c:631
msgid "Start/stop recording a macro"
msgstr "開始 / 停止錄製巨集"
#: src/global.c:632
msgid "Run the last recorded macro"
msgstr "執行上次錄製的巨集"
#: src/global.c:635
msgid "Toggle the case sensitivity of the search"
msgstr "切換搜尋的大小寫符合"
#: src/global.c:637
msgid "Reverse the direction of the search"
msgstr "倒轉搜尋方向"
#: src/global.c:639
msgid "Toggle the use of regular expressions"
msgstr "切換使用正規表示式"
#: src/global.c:642
msgid "Recall the previous search/replace string"
msgstr "重用上次搜尋/置換字串"
#: src/global.c:644
msgid "Recall the next search/replace string"
msgstr "重用下次搜尋/置換字串"
#: src/global.c:647
msgid "Toggle the use of DOS format"
msgstr "切換使用 DOS 格式"
#: src/global.c:648
msgid "Toggle the use of Mac format"
msgstr "切換使用 Mac 格式"
#: src/global.c:649
msgid "Toggle appending"
msgstr "切換附加"
#: src/global.c:650
msgid "Toggle prepending"
msgstr "切換前置"
#: src/global.c:651
msgid "Toggle backing up of the original file"
msgstr "切換備份既有檔案"
#: src/global.c:652
msgid "Execute external command"
msgstr "執行外部命令"
#: src/global.c:655
msgid "Toggle the use of a new buffer"
msgstr "切換使用新緩衝區"
#: src/global.c:657
msgid "Close buffer without saving it"
msgstr "關閉緩衝區而不儲存"
#: src/global.c:659
msgid "Go to file browser"
msgstr "呼叫檔案選單"
#: src/global.c:660
msgid "Exit from the file browser"
msgstr "從檔案選單離開"
#: src/global.c:661
msgid "Go to the first file in the list"
msgstr "跳至列表中的第一個檔案"
#: src/global.c:662
msgid "Go to the last file in the list"
msgstr "跳至列表中的最後一個檔案"
#: src/global.c:663
msgid "Go to the previous file in the list"
msgstr "跳至列表中的上一個檔案"
#: src/global.c:664
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一個檔案"
#: src/global.c:665
msgid "Go to directory"
msgstr "跳至目錄"
#: src/global.c:668
msgid "Invoke the linter, if available"
msgstr "嘗試呼叫 linter。"
#: src/global.c:669
msgid "Go to previous linter msg"
msgstr "跳至上一個 linter 訊息"
#: src/global.c:670
msgid "Go to next linter msg"
msgstr "跳至下一個 linter 訊息"
#: src/global.c:672
msgid "Invoke formatter, if available"
msgstr "嘗試呼叫程式碼格式化工具"
#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:687
msgid "Get Help"
msgstr "求助"
#: src/global.c:690 src/prompt.c:710
msgid "Cancel"
msgstr "取消"
#: src/global.c:703
msgid "Write Out"
msgstr "輸出"
#: src/global.c:742
msgid "Go To Dir"
msgstr "跳至目錄"
#: src/global.c:759
msgid "Cut Text"
msgstr "剪下文字"
#: src/global.c:774
msgid "To Spell"
msgstr "拼字檢查"
#: src/global.c:778
msgid "To Linter"
msgstr "至 Linter"
#: src/global.c:781
msgid "Formatter"
msgstr "程式碼格式化工具"
#: src/global.c:787
msgid "Cur Pos"
msgstr "游標位置"
#: src/global.c:799
msgid "Undo"
msgstr "復原"
#: src/global.c:801
msgid "Redo"
msgstr "重做"
#: src/global.c:804
msgid "Mark Text"
msgstr "標記文字"
#: src/global.c:806
msgid "Copy Text"
msgstr "複製文字"
#: src/global.c:810
msgid "Case Sens"
msgstr "依大小寫"
#: src/global.c:812
msgid "Regexp"
msgstr "正規表示式"
#: src/global.c:814
msgid "Backwards"
msgstr "向後搜尋"
#: src/global.c:820
msgid "No Replace"
msgstr "不置換"
#: src/global.c:832
msgid "To Bracket"
msgstr "至 Bracket"
#: src/global.c:838
msgid "Previous"
msgstr "上個"
#: src/global.c:840
msgid "Next"
msgstr "下個"
#: src/global.c:844 src/global.c:849
msgid "Back"
msgstr "向後"
#: src/global.c:846 src/global.c:851
msgid "Forward"
msgstr "向前"
#: src/global.c:855
msgid "Prev Word"
msgstr "前一個字"
#: src/global.c:857
msgid "Next Word"
msgstr "後一個字"
#: src/global.c:860
msgid "Home"
msgstr "頂端"
#: src/global.c:862
msgid "End"
msgstr "尾端"
#: src/global.c:870
msgid "Scroll Up"
msgstr "向上捲動"
#: src/global.c:872
msgid "Scroll Down"
msgstr "向下捲動"
#: src/global.c:876
msgid "Prev Block"
msgstr "前一個區塊"
#: src/global.c:878
msgid "Next Block"
msgstr "後一個區塊"
#: src/global.c:881
msgid "Beg of Par"
msgstr "段落開頭"
#: src/global.c:883
msgid "End of Par"
msgstr "段落結尾"
#: src/global.c:892
msgid "First Line"
msgstr "首列"
#: src/global.c:894
msgid "Last Line"
msgstr "尾列"
#: src/global.c:898
msgid "Prev File"
msgstr "上個檔案"
#: src/global.c:900
msgid "Next File"
msgstr "下個檔案"
#: src/global.c:916
msgid "Tab"
msgstr "跳格鍵"
#: src/global.c:918
msgid "Enter"
msgstr "輸入鍵"
#: src/global.c:921
msgid "Delete"
msgstr "刪除鍵"
#: src/global.c:923
msgid "Backspace"
msgstr "退格鍵"
#. TRANSLATORS: The next two strings refer to cutting words.
#: src/global.c:934
msgid "Cut Left"
msgstr "切割左邊"
#: src/global.c:936
msgid "Cut Right"
msgstr "切割右邊"
#: src/global.c:938
msgid "CutTillEnd"
msgstr "刪至末端"
#: src/global.c:948
msgid "Word Count"
msgstr "計算字數"
#: src/global.c:952
msgid "Verbatim"
msgstr "原形"
#: src/global.c:958
msgid "Suspend"
msgstr "懸置"
#: src/global.c:962
msgid "Indent Text"
msgstr "縮排文字"
#: src/global.c:964
msgid "Unindent Text"
msgstr "取消縮排文字"
#: src/global.c:968
msgid "Comment Lines"
msgstr "備註行"
#: src/global.c:972
msgid "Complete"
msgstr "完成"
#: src/global.c:976
msgid "Record"
msgstr "錄製"
#: src/global.c:978
msgid "Run Macro"
msgstr "執行巨集"
#. TRANSLATORS: This starts a backward search.
#: src/global.c:982
msgid "Where Was"
msgstr "搜尋"
#: src/global.c:985
msgid "Save"
msgstr "儲存"
#: src/global.c:989
msgid "PrevHstory"
msgstr "上一筆記錄"
#: src/global.c:991
msgid "NextHstory"
msgstr "下一筆記錄"
#: src/global.c:1000
msgid "Go To Text"
msgstr "跳至文字"
#: src/global.c:1004
msgid "DOS Format"
msgstr "DOS 格式"
#: src/global.c:1006
msgid "Mac Format"
msgstr "Mac 格式"
#: src/global.c:1014
msgid "Append"
msgstr "附加"
#: src/global.c:1016
msgid "Prepend"
msgstr "前引"
#: src/global.c:1019
msgid "Backup File"
msgstr "備份檔案"
#: src/global.c:1025
msgid "Execute Command"
msgstr "執行命令"
#: src/global.c:1042
msgid "To Files"
msgstr "檔案選單"
#: src/global.c:1050
msgid "First File"
msgstr "第一個檔案"
#: src/global.c:1052
msgid "Last File"
msgstr "最後的檔案"
#: src/global.c:1055
msgid "Left Column"
msgstr "左欄"
#: src/global.c:1057
msgid "Right Column"
msgstr "右欄"
#: src/global.c:1059
msgid "Top Row"
msgstr "上排"
#: src/global.c:1061
msgid "Bottom Row"
msgstr "下排"
#: src/global.c:1066
msgid "Discard buffer"
msgstr "放棄緩衝區"
#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1071
msgid "Prev Lint Msg"
msgstr "上一個 Lint 訊息"
#: src/global.c:1073
msgid "Next Lint Msg"
msgstr "下一個 Lint 訊息"
#. TRANSLATORS: The next eighteen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1403
msgid "Help mode"
msgstr "輔助模式"
#: src/global.c:1405
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"
#: src/global.c:1407
msgid "Use of one more line for editing"
msgstr "編輯時多使用一列"
#: src/global.c:1409
msgid "Smooth scrolling"
msgstr "平滑式捲動畫面"
#: src/global.c:1411
msgid "Soft wrapping of overlong lines"
msgstr "軟換行過長的行"
#: src/global.c:1413
msgid "Whitespace display"
msgstr "顯示空格"
#: src/global.c:1415
msgid "Color syntax highlighting"
msgstr "語法色彩標示"
#: src/global.c:1417
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"
#: src/global.c:1419
msgid "Auto indent"
msgstr "自動縮排"
#: src/global.c:1421
msgid "Cut to end"
msgstr "剪下至列尾"
#: src/global.c:1423
msgid "Hard wrapping of overlong lines"
msgstr "硬換行過長的行"
#: src/global.c:1425
msgid "Conversion of typed tabs to spaces"
msgstr "已輸入跳格符號至空白的轉換"
#: src/global.c:1427
msgid "Backup files"
msgstr "備份檔案"
#: src/global.c:1429
msgid "Reading file into separate buffer"
msgstr "讀取資料至獨立的緩衝區"
#: src/global.c:1431
msgid "Mouse support"
msgstr "滑鼠支援"
#: src/global.c:1433
msgid "No conversion from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"
#: src/global.c:1435
msgid "Suspension"
msgstr "懸置"
#: src/global.c:1437
msgid "Line numbering"
msgstr "標記列號"
#: src/help.c:307
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search. "
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元,然後按下輸入鍵 (Enter)。如果存在著 符合您所"
"輸入的文字,畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按"
"下輸入鍵則會履行前次的搜尋。"
#: src/help.c:316
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選擇了一段文字 並進行搜尋替換,就只有在選擇文字中符合者將會被"
"替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式:\n"
"\n"
#: src/help.c:322
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter. If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳列輔助說明\n"
"\n"
" 首先輸入您想去的列數編號並按下輸入鍵 (Enter)。如果文章中的列數比您所輸 入要"
"少,您將會被帶至檔案的最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式: \n"
"\n"
#: src/help.c:331
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers). "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先把檔案的名稱鍵入,它將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區,並且將此功能以命令列旗標 -F 或 --"
"multibuffer、Meta-F 開關,或者 nanorc 檔案來啟動的話,所插入的檔案 將會被載入"
"另外的緩衝區中 (利用 Meta-< 和 > 在檔案緩衝區間切換)。 "
#: src/help.c:340
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空的緩衝區,那就不要輸入任何檔名,或是在提示符號後鍵 入一個不"
"存在的檔名,然後按下輸入鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式:\n"
"\n"
#: src/help.c:346
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file. To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 先鍵入您想要以此來儲存目前檔案的名稱,並按下輸入鍵來儲存檔案。\n"
"\n"
" 如果已經用標記選擇了文字,那麼您將會被提示,只儲存標記部分到另外的檔 案。為"
"了降低目前檔案只被其中部分覆寫的機會,在此模式下,目前的檔名不會 成為預設"
"值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式: \n"
"\n"
#: src/help.c:360
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing. You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory. To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構,以選取要讀出或寫入的檔案。您可以 使用上下"
"左右鍵或上頁/下頁來瀏覽,並用 S 或輸入鍵來選取所要的檔案或者 進入所選的目錄。"
"要跳到上層時,選擇在檔案列表頂端名為 \"..\" 的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單: \n"
"\n"
#: src/help.c:373
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元,然後按下輸入鍵 (Enter)。如果存在著 符合您所"
"輸入的文字,畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按"
"下輸入鍵則會履行前次的搜尋。\n"
"\n"
#: src/help.c:382
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於瀏覽器搜尋模式:\n"
"\n"
#: src/help.c:386
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果跳格補正的功能沒有被關閉,您可以利用跳格鍵 (TAB) 去 (嘗試) 自動 補正目錄"
"名稱。\n"
"\n"
" 以下的功能鍵可用於跳至目錄模式: \n"
"\n"
#: src/help.c:399
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file. "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited. It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。當遇到一個未知的字,它會 被標記"
"起來,並讓您編輯替代文字。對於目前檔案中每一個拼錯的字,都會顯示 置換的提示;"
"或者,如果已經用標記選擇了文字的話,那就只作用於選取的文字 之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式: \n"
"\n"
#: src/help.c:414
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode). If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"執行命令輔助說明\n"
"\n"
" 本選單允許您將 shell 執行的命令輸出結果,插入目前的緩衝區 (或是多重緩衝 區模"
"式下的新緩衝區)。如果您需要另一個空白緩衝區,就不要輸入任何命令。\n"
"\n"
" 以下的功能鍵可用於執行命令模式: \n"
"\n"
#: src/help.c:427
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor. There are four main sections of the editor. The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified. Next is the main editor window "
"showing the file being edited. The status line is the third line from the "
"bottom and shows important messages. "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面,模仿華盛頓大學的 Pico 文字 編輯器。"
"它含有四個主要部分:頂列顯示程式版本、目前被編輯的檔案名稱, 以及是否這檔案已"
"經更動過。接著是主要編輯區,顯示正在編輯的檔案。狀態 列位於倒數第三列,用來顯"
"示重要的訊息。\n"
"\n"
" "
#: src/help.c:437
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice. Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup. "
msgstr ""
"底部的兩列顯示編輯器中最常用到的快捷鍵。\n"
"\n"
"快捷鍵的定義如下:控制鍵組 (Control-key) 序列是以一個帽子符號「^」表示,且可"
"藉由使用 Ctrl 鍵或按兩下 Esc 鍵輸入。Meta-Key 序列是以「M-」符號表示,且可以"
"藉由您的鍵盤設定來選擇使用 Alt、Cmd 或 Esc 鍵輸入。"
#: src/help.c:444
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value. The "
"following keystrokes are available in the main editor window. Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外,按 Esc 兩次 之後再鍵入從 000 到 255 之間的三位數字,則會輸入該 ASCII 碼"
"對應的字 元。下列按鍵組合可用於主要編輯區,替代按鍵則顯示於括弧內:\n"
"\n"
#: src/help.c:476 src/help.c:557
msgid "enable/disable"
msgstr "開啟/關閉"
#: src/history.c:240
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下輸入鍵以繼續\n"
#: src/history.c:283
#, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"無法建立目錄 %s%s\n"
"對於儲存/載入搜尋歷史或游標位置而言,它是必要的\n"
#: src/history.c:290
#, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路徑 %s 並非卻必須是個目錄。\n"
"Nano 將無法載入或儲存搜尋記錄或游標位置\n"
#: src/history.c:380 src/history.c:389 src/history.c:471 src/history.c:493
#, c-format
msgid "Error writing %s: %s\n"
msgstr "寫入 %s 時發生錯誤: %s\n"
#: src/nano.c:536
msgid "Key is invalid in view mode"
msgstr "在檢視模式中,此按鍵無效。"
#: src/nano.c:542
msgid "This function is disabled in restricted mode"
msgstr "這功能已經在限制模式中被停用"
#: src/nano.c:550
msgid "Help is not available"
msgstr "說明不可用"
#: src/nano.c:650
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"
#: src/nano.c:652
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"緩衝區未寫入至 %s: %s\n"
#: src/nano.c:655
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"緩衝區未寫入: %s\n"
#: src/nano.c:768
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [選項] [[+列數[,行數]] 檔案名稱]…\n"
"\n"
#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:771
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename. The column number can be added after a comma.\n"
msgstr ""
"為了要擺放游標至一個檔案中指定的行,在檔案名稱之間放入一個「+」於行碼前面。\n"
"欄碼可以在逗號後增加。\n"
#: src/nano.c:773
#, c-format
msgid ""
"When a filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""
"當檔案名稱為「-」Nano 將從標準輸入內讀取資料\n"
"\n"
#: src/nano.c:774
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "選項\t\tGNU 長選項\t\t意義\n"
#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output. Try to keep them at most 40 characters.
#: src/nano.c:779
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵功能"
#: src/nano.c:781
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"
#: src/nano.c:782
msgid "-C <dir>"
msgstr "-C <目錄>"
#: src/nano.c:782
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目錄>"
#: src/nano.c:783
msgid "Directory for saving unique backup files"
msgstr "用以儲存獨一備份檔案的目錄"
#: src/nano.c:786
msgid "Use bold instead of reverse video text"
msgstr "使用粗體以代替反白顯示文字"
#: src/nano.c:788
msgid "Convert typed tabs to spaces"
msgstr "將已輸入的跳格符號轉換為空白"
#: src/nano.c:793
msgid "Read a file into a new buffer by default"
msgstr "預設值為讀取一個檔案至新的緩衝區"
#: src/nano.c:796
msgid "Use (vim-style) lock files"
msgstr "使用 (vim 形式) 鎖定檔案"
#: src/nano.c:801
msgid "Log & read search/replace string history"
msgstr "記錄與讀取 搜尋/置換 的歷史字串"
#: src/nano.c:805
msgid "Don't look at nanorc files"
msgstr "不要參考 nanorc 檔案"
#: src/nano.c:808
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字鍵區按鍵混淆問題"
#: src/nano.c:810
msgid "Don't add newlines to the ends of files"
msgstr "不要將換列加到檔案末端"
#: src/nano.c:813
msgid "Trim tail spaces when hard-wrapping"
msgstr "當使用硬換行,修剪後端的空白"
#: src/nano.c:817
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"
#: src/nano.c:819
msgid "Use one more line for editing"
msgstr "編輯時多使用一列"
#: src/nano.c:823
msgid "Log & read location of cursor position"
msgstr "記錄 & 讀取游標所在位置"
#: src/nano.c:826
msgid "-Q <str>"
msgstr "-Q <字串>"
#: src/nano.c:826
msgid "--quotestr=<str>"
msgstr "--quotestr=<字串>"
#: src/nano.c:826
msgid "Quoting string"
msgstr "引用代表字串"
#: src/nano.c:829
msgid "Restricted mode"
msgstr "限制模式"
#: src/nano.c:831
msgid "Scroll by line instead of half-screen"
msgstr "逐列捲動以代替半個畫面"
#: src/nano.c:833
msgid "-T <#cols>"
msgstr "-T <#行數>"
#: src/nano.c:833
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#行數>"
#: src/nano.c:834
msgid "Set width of a tab to #cols columns"
msgstr "設定跳格寬度為 #行數"
#: src/nano.c:835
msgid "Do quick statusbar blanking"
msgstr "狀態列快速閃動"
#: src/nano.c:836
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"
#: src/nano.c:839
msgid "Detect word boundaries more accurately"
msgstr "更正確地偵測單字邊界"
#: src/nano.c:840
msgid "-X <str>"
msgstr "-X <字串>"
#: src/nano.c:840
msgid "--wordchars=<str>"
msgstr "--wordchars=<字串>"
#: src/nano.c:841
msgid "Which other characters are word parts"
msgstr "哪些其他符號為單字部份"
#: src/nano.c:845
msgid "-Y <name>"
msgstr "-Y <名稱>"
#: src/nano.c:845
msgid "--syntax=<name>"
msgstr "--syntax=<名稱>"
#: src/nano.c:846
msgid "Syntax definition to use for coloring"
msgstr "用於顏色的語法定義"
#: src/nano.c:849
msgid "When soft-wrapping, do it at whitespace"
msgstr "當使用軟換行,請在空白處進行"
#: src/nano.c:851
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"
#: src/nano.c:853
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 退格鍵/刪除鍵 混淆問題"
#: src/nano.c:856
msgid "Show cursor in file browser"
msgstr "在檔案瀏覽器中顯示游標"
#: src/nano.c:858
msgid "Show this help text and exit"
msgstr "顯示這份說明文字並退出"
#: src/nano.c:860
msgid "Automatically indent new lines"
msgstr "自動縮排新列"
#: src/nano.c:861
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"
#: src/nano.c:864
msgid "Show line numbers in front of the text"
msgstr "顯示行號於文字前"
#: src/nano.c:867
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"
#: src/nano.c:869
msgid "Do not read the file (only write it)"
msgstr "不讀取這個檔案(只寫入檔案)"
#: src/nano.c:871
msgid "-o <dir>"
msgstr "-o <目錄>"
#: src/nano.c:871
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目錄>"
#: src/nano.c:872
msgid "Set operating directory"
msgstr "設定操作目錄"
#: src/nano.c:874
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"
#: src/nano.c:876
msgid "-r <#cols>"
msgstr "-r <#行數>"
#: src/nano.c:876
msgid "--fill=<#cols>"
msgstr "--fill=<#行數>"
#: src/nano.c:877
msgid "Set hard-wrapping point at column #cols"
msgstr "設定硬換列點為 #行數"
#: src/nano.c:881
msgid "-s <prog>"
msgstr "-s <程式>"
#: src/nano.c:881
msgid "--speller=<prog>"
msgstr "--speller=<程式>"
#: src/nano.c:882
msgid "Enable alternate speller"
msgstr "啟用替代的拼字檢查程式"
#: src/nano.c:884
msgid "Auto save on exit, don't prompt"
msgstr "離開時自動儲存,不要提示"
#: src/nano.c:886
msgid "Save a file by default in Unix format"
msgstr "預設值以 Unix 格式儲存檔案"
#: src/nano.c:888
msgid "View mode (read-only)"
msgstr "觀看模式 (唯讀)"
#: src/nano.c:890
msgid "Don't hard-wrap long lines"
msgstr "不硬換行長行"
#: src/nano.c:892
msgid "Don't show the two help lines"
msgstr "不要顯示兩說明列"
#: src/nano.c:894
msgid "Make Ctrl+Right stop at word ends"
msgstr ""
#: src/nano.c:897
msgid "Enable suspension"
msgstr "開啟懸置功能"
#: src/nano.c:899
msgid "Enable soft line wrapping"
msgstr "開啟長列換列"
#: src/nano.c:911
#, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano版本 %s\n"
#: src/nano.c:914
#, c-format
msgid " (C) 2014-%s the contributors to nano\n"
msgstr " (C) 2014-%s Nano 貢獻者\n"
#: src/nano.c:915
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
msgstr " 電子郵件: nano@nano-editor.org\t網頁: https://nano-editor.org/"
#: src/nano.c:916
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 編譯選項:"
#: src/nano.c:1062
msgid "No file name"
msgstr "沒有檔案名稱"
#: src/nano.c:1064
msgid "Save modified buffer? (Answering \"No\" will DISCARD changes.) "
msgstr "儲存修改過的緩衝區回答「No」將會失去所有變更。"
#: src/nano.c:1115
#, c-format
msgid "Reading from standard input; type ^D or ^D^D to finish.\n"
msgstr ""
#: src/nano.c:1142
#, c-format
msgid "Failed to open stdin: %s"
msgstr "無法開啟標準輸入:%s"
#: src/nano.c:1155
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "無法重新開啟來自鍵盤的標準輸入,抱歉\n"
#: src/nano.c:1236
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"
#: src/nano.c:1243
#, c-format
msgid "Sorry! Nano crashed! Code: %d. Please report a bug.\n"
msgstr ""
#: src/nano.c:1259
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "利用 \"fg\" 來回到 nano。\n"
#: src/nano.c:1277
msgid "Suspension is not enabled"
msgstr "懸置尚未啟用"
#: src/nano.c:1422
msgid "enabled"
msgstr "開啟"
#: src/nano.c:1422
msgid "disabled"
msgstr "關閉"
#: src/nano.c:1552
msgid "Unbound key"
msgstr "未綁定的按鍵"
#: src/nano.c:1555
msgid "Unbindable key: M-["
msgstr "未綁定的按鍵M-["
#: src/nano.c:1557
#, c-format
msgid "Unbound key: M-%c"
msgstr "未綁定的按鍵M-%c"
#: src/nano.c:1559
#, c-format
msgid "Unbound key: ^%c"
msgstr "未指定的按鍵:^%c"
#: src/nano.c:1561
#, c-format
msgid "Unbound key: %c"
msgstr "未綁定按鍵:%c"
#: src/nano.c:2151 src/rcfile.c:1181
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的跳格寬度 \"%s\" 無效"
#: src/nano.c:2228 src/rcfile.c:1118
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填滿行數 \"%s\" 無效"
#: src/nano.c:2286
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr "輸入「%s -h」顯示可用的選項列表。\n"
#: src/nano.c:2599 src/search.c:787
msgid "Invalid line or column number"
msgstr "無效的列號或行號"
#: src/nano.c:2643
#, c-format
msgid "Mistakes in '%s'"
msgstr "「%s」發生錯誤"
#. TRANSLATORS: For the next three strings, specify the starting letters
#. * of the translations for "Yes"/"No"/"All". The first letter of each of
#. * these strings MUST be a single-byte letter; others may be multi-byte.
#: src/prompt.c:676
msgid "Yy"
msgstr "Yy"
#: src/prompt.c:677
msgid "Nn"
msgstr "Nn"
#: src/prompt.c:678
msgid "Aa"
msgstr "Aa"
#: src/prompt.c:697
msgid "Yes"
msgstr "是"
#: src/prompt.c:701
msgid "No"
msgstr "否"
#: src/prompt.c:706
msgid "All"
msgstr "全部"
#: src/rcfile.c:152
#, c-format
msgid "Error in %s on line %zu: "
msgstr "在 %s (位於第 %zu 列) 中發生錯誤: "
#: src/rcfile.c:203
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 '%s' 有未封閉的 \""
#: src/rcfile.c:228 src/rcfile.c:690 src/rcfile.c:742 src/rcfile.c:822
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"
#: src/rcfile.c:254 src/search.c:47
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "不良的正規表示式 \"%s\": %s"
#: src/rcfile.c:273
msgid "Missing syntax name"
msgstr "缺少語法名稱"
#: src/rcfile.c:281
msgid "Unpaired quote in syntax name"
msgstr "語法名稱中的不成對引號"
#: src/rcfile.c:293
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 語法已被保留"
#: src/rcfile.c:324
msgid "The \"default\" syntax does not accept extensions"
msgstr "\"default\" 語法不允許副檔名"
#: src/rcfile.c:359
msgid "Missing key name"
msgstr "缺少語法名稱"
#: src/rcfile.c:368 src/rcfile.c:379
msgid "Key name is too short"
msgstr "按鍵名稱過短"
#: src/rcfile.c:389
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "按鍵名稱必須以 \"^\", \"M\", 或 \"F\" 開始"
#: src/rcfile.c:392
#, c-format
msgid "Key name %s is invalid"
msgstr "按鍵名稱 %s 無效"
#: src/rcfile.c:401
msgid "Must specify a function to bind the key to"
msgstr "必須指定按鍵所繫結的功能"
#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:411
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr "必須指定一個目錄或「all」所有以綁定 / 取消綁定按鍵"
#: src/rcfile.c:429
#, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "無法映射名稱「%s」到某一功能"
#: src/rcfile.c:436
#, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "無法映射名稱「%s」到某一選單"
#: src/rcfile.c:463
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr "功能「%s」不存在於目錄「%s」"
#: src/rcfile.c:472
#, c-format
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "抱歉,按鍵敲擊「%s」不應該被綁定"
#: src/rcfile.c:572
#, c-format
msgid "Error expanding %s: %s"
msgstr "展開 %s 時發生錯誤: %s"
#: src/rcfile.c:612
#, c-format
msgid "Color \"%s\" not understood"
msgstr "無法辨識顏色「%s」"
#: src/rcfile.c:625
msgid "A background color cannot be bright"
msgstr "背景顏色不能太亮"
#: src/rcfile.c:654 src/rcfile.c:794 src/rcfile.c:854
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr "「%s」指令需要一個前置的 'syntax' 指令"
#: src/rcfile.c:660
msgid "Missing color name"
msgstr "缺少顏色名稱"
#: src/rcfile.c:670 src/rcfile.c:806
#, c-format
msgid "Missing regex string after '%s' command"
msgstr "在「%s」指令之後缺少正規表示式字串"
#: src/rcfile.c:701 src/rcfile.c:752
msgid "Empty regex string"
msgstr "空的正規表示式字串"
#: src/rcfile.c:736
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""
#: src/rcfile.c:801
#, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "「default」語法不允許「%s」正規表達式"
#: src/rcfile.c:859
#, c-format
msgid "Missing argument after '%s'"
msgstr "在「%s」之後缺少參數"
#: src/rcfile.c:869
#, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "引數 '%s' 缺少關閉用的 \""
#: src/rcfile.c:897
#, c-format
msgid "Fatal error: no keys mapped for function \"%s\". Exiting.\n"
msgstr "嚴重錯誤:沒有按鍵映射至功能「%s」。正在退出。\n"
#: src/rcfile.c:899
#, c-format
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "假如需要,使用 nano 的 -I 選項來調整您的 nanorc 設定。\n"
#: src/rcfile.c:954
#, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "無法找到要展開的語法「%s」"
#: src/rcfile.c:976 src/rcfile.c:1191
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "語法「%s」沒有任何顏色命令"
#: src/rcfile.c:1007
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令「%s」在包含的檔案中不允許"
#: src/rcfile.c:1022
#, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識 \"%s\" 命令"
#: src/rcfile.c:1034
msgid "Missing option"
msgstr "缺少選項"
#: src/rcfile.c:1048
#, c-format
msgid "Unknown option \"%s\""
msgstr "未知的選項 \"%s\""
#: src/rcfile.c:1061
#, c-format
msgid "Cannot unset option \"%s\""
msgstr "無法取消選項 \"%s\""
#: src/rcfile.c:1073
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項 \"%s\" 要求引數"
#: src/rcfile.c:1089
msgid "Argument is not a valid multibyte string"
msgstr "參數不是一個有效的多位元組字串"
#: src/rcfile.c:1130 src/rcfile.c:1151 src/rcfile.c:1158
msgid "Non-blank characters required"
msgstr "需要非空格字元"
#: src/rcfile.c:1137
msgid "Two single-column characters required"
msgstr "需要兩個單行字元"
#: src/rcfile.c:1266
msgid "I can't find my home directory! Wah!"
msgstr "我找不到我的家目錄!哇!"
#. TRANSLATORS: The next three modify the search prompt.
#: src/search.c:105
msgid " [Case Sensitive]"
msgstr " [符合大小寫]"
#: src/search.c:106
msgid " [Regexp]"
msgstr " [正規表示式]"
#: src/search.c:107
msgid " [Backwards]"
msgstr " [向後搜尋]"
#. TRANSLATORS: The next two modify the search prompt.
#: src/search.c:110
msgid " (to replace) in selection"
msgstr " 在標記中(置換)"
#: src/search.c:112
msgid " (to replace)"
msgstr " (置換)"
#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:220
msgid "Searching..."
msgstr "搜尋中…"
#: src/search.c:391
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""
#. TRANSLATORS: This is a prompt.
#: src/search.c:585
msgid "Replace this instance?"
msgstr "置換這個?"
#. TRANSLATORS: This is a prompt.
#: src/search.c:707
msgid "Replace with"
msgstr "以此置換"
#: src/search.c:738
#, c-format
msgid "Replaced %zd occurrence"
msgid_plural "Replaced %zd occurrences"
msgstr[0] "已置換 %zd 處"
#. TRANSLATORS: This is a prompt.
#: src/search.c:766
msgid "Enter line number, column number"
msgstr "輸入列號,行號"
#: src/search.c:955
msgid "Not a bracket"
msgstr "並非一個括號"
#: src/search.c:1016
msgid "No matching bracket"
msgstr "無對應括號"
#: src/text.c:63
msgid "Mark Set"
msgstr "標記設定"
#: src/text.c:67
msgid "Mark Unset"
msgstr "標記解除"
#: src/text.c:77
#, c-format
msgid "Error invoking \"%s\""
msgstr "呼叫 \"%s\" 錯誤"
#: src/text.c:552
msgid "Commenting is not supported for this file type"
msgstr "這個檔案類型不支援註記"
#: src/text.c:562
msgid "Cannot comment past end of file"
msgstr "無法備註於檔案結尾"
#: src/text.c:685
msgid "Nothing in undo buffer!"
msgstr "復原緩衝區中沒有任何東西!"
#. TRANSLATORS: The next twelve strings describe actions
#. * that are undone or redone. It are all nouns, not verbs.
#: src/text.c:704 src/text.c:775 src/text.c:877 src/text.c:946
msgid "text add"
msgstr "文字加入"
#: src/text.c:719 src/text.c:889
msgid "line break"
msgstr "分列符號"
#: src/text.c:731 src/text.c:902
msgid "text delete"
msgstr "文字刪除"
#: src/text.c:741 src/text.c:915
msgid "line join"
msgstr "列聯結"
#: src/text.c:760 src/text.c:930
msgid "text replace"
msgstr "文字置換"
#: src/text.c:780 src/text.c:951
msgid "text cut"
msgstr "文字剪下"
#: src/text.c:784 src/text.c:955
msgid "text uncut"
msgstr "文字取消剪下"
#: src/text.c:788 src/text.c:959
msgid "text insert"
msgstr "文字插入"
#: src/text.c:805 src/text.c:967
msgid "indent"
msgstr "縮排"
#: src/text.c:809 src/text.c:971
msgid "unindent"
msgstr "還原縮排"
#: src/text.c:814 src/text.c:976
msgid "comment"
msgstr "備註"
#: src/text.c:818 src/text.c:980
msgid "uncomment"
msgstr "解除備註"
#: src/text.c:827
#, c-format
msgid "Undid action (%s)"
msgstr "已復原動作 (%s)"
#: src/text.c:852
msgid "Nothing to re-do!"
msgstr "沒有任何東西可重做!"
#: src/text.c:989
#, c-format
msgid "Redid action (%s)"
msgstr "已重做動作 (%s)"
#: src/text.c:1095 src/text.c:2654 src/text.c:3041
msgid "Could not create pipe"
msgstr "無法建立管線功能"
#: src/text.c:1124 src/text.c:2741 src/text.c:2858 src/text.c:3077
#: src/text.c:3371
msgid "Could not fork"
msgstr "執行功能無效"
#: src/text.c:1147
#, fuzzy, c-format
msgid "Failed to open pipe: %s"
msgstr "無法開啟標準輸入:%s"
#: src/text.c:2063
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字串 %s: %s"
#: src/text.c:2422
msgid "Can now UnJustify!"
msgstr "現在可以還原對齊!"
#: src/text.c:2577
#, c-format
msgid "Unfindable word: %s"
msgstr "無法搜尋的單字:%s"
#: src/text.c:2596
msgid "Edit a replacement"
msgstr "編輯替代文字"
#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2605
msgid "Next word..."
msgstr "下一個字…"
#: src/text.c:2656
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立錯字列表,請稍待…"
#: src/text.c:2747 src/text.c:3084
msgid "Could not get size of pipe buffer"
msgstr "無法得知管線緩衝區大小"
#: src/text.c:2801
msgid "Error invoking \"spell\""
msgstr "呼叫 \"spell\" 錯誤"
#: src/text.c:2804
msgid "Error invoking \"sort -f\""
msgstr "呼叫 \"sort -f\" 錯誤"
#: src/text.c:2807
msgid "Error invoking \"uniq\""
msgstr "呼叫 \"uniq\" 錯誤"
#: src/text.c:2975
msgid "Invoking spell checker, please wait"
msgstr "嘗試呼叫拼字檢查,請稍等"
#: src/text.c:2992
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼字檢查失敗: %s"
#: src/text.c:2994
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼字檢查失敗: %s: %s"
#: src/text.c:2997
msgid "Finished checking spelling"
msgstr "拼字檢查結束"
#: src/text.c:3020
msgid "No linter defined for this type of file!"
msgstr "沒有這個檔案類型的 Linter 被定義!"
#: src/text.c:3030
msgid "Save modified buffer before linting?"
msgstr "在 Lint 之前儲存已修改過的緩衝區?"
#: src/text.c:3046
msgid "Invoking linter, please wait"
msgstr "調用 linter 中,請稍候"
#: src/text.c:3178
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr "從指令中取得 0 個可解析的行:%s"
#: src/text.c:3208
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr "這個訊息是為了未開啟的檔案 %s在新緩衝區開啟它"
#: src/text.c:3244
msgid "No more errors in unopened files, cancelling"
msgstr "在未開啟的檔案中沒有其他錯誤,取消中"
#: src/text.c:3291
msgid "At last message"
msgstr "最近的訊息"
#: src/text.c:3296
msgid "At first message"
msgstr "第一個訊息"
#: src/text.c:3332
msgid "Finished"
msgstr "完成"
#: src/text.c:3356
msgid "Invoking formatter, please wait"
msgstr "調用格式化工具,請稍候"
#: src/text.c:3405
msgid "Finished formatting"
msgstr "完成格式化"
#: src/text.c:3487
#, c-format
msgid "%sWords: %zu Lines: %zd Chars: %zu"
msgstr "%s字數%zu 行: %zd 位元組:%zu"
#: src/text.c:3488
msgid "In Selection: "
msgstr "於選擇部分: "
#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3501
msgid "Verbatim Input"
msgstr "原形輸入"
#: src/text.c:3693
msgid "No further matches"
msgstr "沒有其他符合項目"
#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3697
msgid "No matches"
msgstr "找不到符合結果"
#: src/utils.c:360 src/utils.c:372
msgid "nano is out of memory!"
msgstr "nano 已耗盡記憶體!"
#: src/winio.c:86
msgid "Recording a macro..."
msgstr "錄製巨集中…"
#: src/winio.c:89
msgid "Stopped recording"
msgstr "停止錄製"
#: src/winio.c:100
msgid "Cannot run macro while recording"
msgstr "無法在錄製時執行巨集"
#: src/winio.c:106
msgid "Macro is empty"
msgstr "巨集為空"
#: src/winio.c:207
msgid "Too many errors from stdin"
msgstr "來自標準輸入的內容擁有太多錯誤"
#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not recogize.
#: src/winio.c:1289
msgid "Unknown sequence"
msgstr "未知的序列"
#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1425
#, c-format
msgid "Unicode Input: %s"
msgstr "萬國碼輸入:%s"
#: src/winio.c:2031
msgid "DIR:"
msgstr "目錄:"
#: src/winio.c:2052 src/winio.c:2056
msgid "Modified"
msgstr "已更動"
#: src/winio.c:2054
msgid "View"
msgstr "觀看"
#: src/winio.c:2184
msgid "Further warnings were suppressed"
msgstr "更多錯誤已經抑制"
#: src/winio.c:3359
#, c-format
msgid "line %zd/%zd (%d%%), col %zu/%zu (%d%%), char %zu/%zu (%d%%)"
msgstr "列 %zd/%zd (%d%%), 行 %zu/%zu (%d%%), 字元 %zu/%zu (%d%%)"
#: src/winio.c:3557
msgid "The nano text editor"
msgstr "nano 文字編輯器"
#: src/winio.c:3558
msgid "version"
msgstr "版本"
#: src/winio.c:3559
msgid "Brought to you by:"
msgstr "來自於:"
#: src/winio.c:3560
msgid "Special thanks to:"
msgstr "特別感謝:"
#: src/winio.c:3561
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"
#: src/winio.c:3562
msgid "the many translators and the TP"
msgstr "許多的翻譯者與 TP"
#: src/winio.c:3563
msgid "For ncurses:"
msgstr "ncurses 部分:"
#: src/winio.c:3564
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人…"
#: src/winio.c:3565
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"
#~ msgid "Reading from stdin, ^C to abort\n"
#~ msgstr "讀取自標準輸入,^C 以放棄\n"
#~ msgid ""
#~ "Read %lu line (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式 - 警告:沒有寫入權限)"
#~ msgid ""
#~ "Read %lu line (Converted from Mac format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from Mac format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式 - 警告:沒有寫入權限)"
#~ msgid ""
#~ "Read %lu line (Converted from DOS format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式 - 警告:沒有寫入權限)"
#~ msgid "Read %lu line ( Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (警告:沒有寫入權限)"
#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 設定下,無法前引或附加至符號連結檔"
#~ msgid ""
#~ "Detected a legacy nano history file (%s) which I tried to move\n"
#~ "to the preferred location (%s) but encountered an error: %s"
#~ msgstr ""
#~ "偵測到舊的 nano 歷史檔案 (%s),我已嘗試將它移動\n"
#~ "到偏好的位置 (%s) 但是遇到了錯誤:%s"
#~ msgid ""
#~ "Detected a legacy nano history file (%s) which I moved\n"
#~ "to the preferred location (%s)\n"
#~ "(see the nano FAQ about this change)"
#~ msgstr ""
#~ "偵測到舊的 nano 歷史檔案 (%s),我已將它移動\n"
#~ "到偏好的位置 (%s)\n"
#~ "(參看關於這個變更的 nano FAQ)"
#~ msgid "Insert File"
#~ msgstr "插入檔案"
#~ msgid "Exit from nano"
#~ msgstr "離開 nano"
#~ msgid "Go to previous screen"
#~ msgstr "跳至前一畫面"
#~ msgid "Find Other Bracket"
#~ msgstr "尋找其他括號"
#~ msgid "Long line wrapping"
#~ msgstr "長列轉換"
#~ msgid "Multiple file buffers"
#~ msgstr "多重檔案緩衝區"
#~ msgid "Soft line wrapping"
#~ msgstr "長列換列"
#~ msgid "Window size is too small for nano...\n"
#~ msgstr "視窗尺寸對 nano 來說太小了…\n"
#~ msgid "Option\t\tMeaning\n"
#~ msgstr "選項\t\t意義\n"
#~ msgid "+LINE,COLUMN"
#~ msgstr "+列數,行數"
#~ msgid "Start at line LINE, column COLUMN"
#~ msgstr "從所指列數與行數開始"
#~ msgid "Enable multiple file buffers"
#~ msgstr "開啟多重檔案緩衝區功能"
#~ msgid "-Y <str>"
#~ msgstr "-Y <字串>"
#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符號連結,而是覆寫"
#~ msgid "Silently ignore startup issues like rc file errors"
#~ msgstr "默默地忽略像是 rc 檔案錯誤之類的啟動問題"
#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允許一般的復原 [實驗性質]"
#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略,為了與 Pico 相容)"
#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "抱歉,已經關閉此功能的支援"
#~ msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
#~ msgstr "儲存更動過的緩衝區嗎 (回答 \"No\" 會撤銷修改)"
#~ msgid "Unknown Command"
#~ msgstr "不明的命令"
#~ msgid "XON ignored, mumble mumble"
#~ msgstr "忽略 XON嗯嗯。"
#~ msgid "XOFF ignored, mumble mumble"
#~ msgstr "忽略 XOFF嗯嗯。"
#~ msgid "Cannot add a magic string regex without a syntax command"
#~ msgstr "無法增加魔法正規表示式而沒有語法命令"
#~ msgid "Missing magic string name"
#~ msgstr "缺少魔法字串名稱"
#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必須指定按鍵所繫結的選單 (或是 \"all\")"
#~ msgid ""
#~ "Color \"%s\" not understood.\n"
#~ "Valid colors are \"green\", \"red\", \"blue\",\n"
#~ "\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
#~ "\"black\", with the optional prefix \"bright\"\n"
#~ "for foreground colors."
#~ msgstr ""
#~ "顏色 \"%s\" 無法辨識。\n"
#~ "有效的顏色是 \"green\"(綠)、\"red\"(紅)、\"blue\"(藍)、\n"
#~ "\"white\"(白)、\"yellow\"(黃)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
#~ "\"black\"(黑),加上選擇性的前置字 \"bright\"(明亮) \n"
#~ "可用於前景色。"
#~ msgid "Cannot add a color command without a syntax command"
#~ msgstr "無法增加顏色命令而沒有語法命令"
#~ msgid "Cannot add a header regex without a syntax command"
#~ msgstr "無法增加標頭正規表示式而沒有語法命令"
#~ msgid "Missing flag"
#~ msgstr "缺少旗標"
#~ msgid ""
#~ "\n"
#~ "Press Enter to continue starting nano.\n"
#~ msgstr ""
#~ "\n"
#~ "按下輸入鍵以繼續啟動 nano。\n"
#~ msgid "Internal error: can't match line %d. Please save your work"
#~ msgstr "內部錯誤:無法匹配第 %d 列。 請儲存您的工作"
#~ msgid "line wrap"
#~ msgstr "長列換列"
#~ msgid "Internal error: unknown type. Please save your work"
#~ msgstr "內部錯誤:不明型態。 請儲存您的工作"
#~ msgid "Internal error: Redo setup failed. Please save your work"
#~ msgstr "內部錯誤:重做設定失敗。 請儲存您的工作"
#~ msgid "Could not pipe"
#~ msgstr "管線功能無效"
#~ msgid "Internal error: can't setup uncut. Please save your work."
#~ msgstr "內部錯誤:無法設定取消剪下。 請儲存您的工作。"
#~ msgid "Internal error: unknown type. Please save your work."
#~ msgstr "內部錯誤:不明型態。 請儲存您的工作。"
#~ msgid "File:"
#~ msgstr "檔案:"
#~ msgid ""
#~ "Warning: Modifying a file which is not locked, check directory permission?"
#~ msgstr "警告:正在變更一個未鎖定的檔案,要檢查一下目錄權限嗎?"