smol/po/zh_CN.po

2724 lines
64 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Simplified Chinese Messages for the nano editor
# Copyright (C) 2004, 2005, 2009, 2010, 2011 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009.
# Aron Xu <happyaron.xu@gmail.com>, 2009, 2010, 2011, 2015.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.4.2\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2017-06-25 11:00+0200\n"
"PO-Revision-Date: 2015-11-13 12:46+0800\n"
"Last-Translator: Aron Xu <happyaron.xu@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#: src/browser.c:71
#, fuzzy, c-format
msgid "Cannot open directory: %s"
msgstr "无法上移一个目录"
#. TRANSLATORS: This is a prompt.
#: src/browser.c:235
msgid "Go To Directory"
msgstr "跳至目录"
#: src/browser.c:238 src/browser.c:698 src/files.c:1104 src/files.c:2155
#: src/nano.c:1082 src/search.c:172 src/search.c:256 src/search.c:779
#: src/search.c:840 src/text.c:3055 src/text.c:3260
msgid "Cancelled"
msgstr "已取消"
#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:255 src/browser.c:287
#, fuzzy, c-format
msgid "Can't go outside of %s"
msgstr "无法写入%s 外部"
#: src/browser.c:278
msgid "Can't move up a directory"
msgstr "无法上移一个目录"
#: src/browser.c:294 src/files.c:994 src/files.c:1000 src/files.c:1668
#: src/files.c:1793 src/files.c:1835 src/files.c:1855 src/files.c:1967
#: src/files.c:2859 src/files.c:3092 src/rcfile.c:562 src/rcfile.c:1263
#, c-format
msgid "Error reading %s: %s"
msgstr "读取%s 出错:%s"
#: src/browser.c:374
msgid "The working directory has disappeared"
msgstr ""
#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:566 src/browser.c:573
msgid "(dir)"
msgstr "(目录)"
#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:570
msgid "(parent dir)"
msgstr "(父目录)"
#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:600
msgid "(huge)"
msgstr ""
#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:687 src/search.c:152
msgid "Search"
msgstr "搜索"
#: src/browser.c:729 src/search.c:331
msgid "Search Wrapped"
msgstr "已从头搜索"
#: src/browser.c:739 src/search.c:458
msgid "This is the only occurrence"
msgstr "这是惟一出现之处"
#: src/browser.c:783 src/search.c:426
msgid "No current search pattern"
msgstr "没有当前搜索模式"
#: src/color.c:182
#, fuzzy, c-format
msgid "Unknown syntax name: %s"
msgstr "缺少语法名称"
#: src/color.c:243
#, c-format
msgid "magic_load() failed: %s"
msgstr ""
#: src/color.c:247
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr ""
#: src/files.c:48
#, fuzzy, c-format
msgid "Directory '%s' does not exist"
msgstr "写入备份文件%s 出错:文件所有者不匹配"
#: src/files.c:50
#, c-format
msgid "Path '%s': %s"
msgstr ""
#: src/files.c:52
#, fuzzy, c-format
msgid "Path '%s' is not a directory"
msgstr "\"%s\" 是一个目录"
#: src/files.c:54
#, c-format
msgid "Path '%s' is not accessible"
msgstr ""
#: src/files.c:56
#, c-format
msgid "Directory '%s' is not writable"
msgstr ""
#. TRANSLATORS: Keep the next eight messages at most 76 characters.
#: src/files.c:186
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr ""
#: src/files.c:195
#, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr ""
#: src/files.c:215 src/files.c:224 src/files.c:262 src/files.c:272
#, fuzzy, c-format
msgid "Error writing lock file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:294
#, fuzzy, c-format
msgid "Error deleting lock file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:328
#, fuzzy, c-format
msgid "Error opening lock file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:342
#, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr ""
#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:363
#, c-format
msgid "File %s is being edited (by %s with %s, PID %s); continue?"
msgstr ""
#: src/files.c:440
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "无法插入%s 外部的文件"
#: src/files.c:455 src/files.c:984 src/rcfile.c:541
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一个目录"
#: src/files.c:457
#, fuzzy, c-format
msgid "\"%s\" is not a normal file"
msgstr "\"%s\" 是一个设备文件"
#: src/files.c:612
msgid "No more open file buffers"
msgstr "无多余文件缓冲区可启用"
#: src/files.c:636
#, c-format
msgid "Switched to %s"
msgstr "切换至%s"
#: src/files.c:638 src/global.c:1000 src/winio.c:1999
msgid "New Buffer"
msgstr "新缓冲区"
#: src/files.c:910
#, c-format
msgid "File '%s' is unwritable"
msgstr ""
#. TRANSLATORS: Keep the next four messages at most 78 characters.
#: src/files.c:914
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式)"
#: src/files.c:919
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已读取%lu 行 (转换自Mac 格式)"
#: src/files.c:924
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已读取%lu 行 (转换自DOS 格式)"
#: src/files.c:930
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已读取%lu 行"
#: src/files.c:970
msgid "New File"
msgstr "新文件"
#: src/files.c:975
#, fuzzy, c-format
msgid "File \"%s\" not found"
msgstr "找不到\"%s\""
#: src/files.c:985 src/rcfile.c:542
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一个设备文件"
#: src/files.c:1003
msgid "Reading File"
msgstr "正在读取文件"
#. TRANSLATORS: The next four messages are prompts.
#: src/files.c:1070
#, fuzzy
msgid "Command to execute in new buffer"
msgstr "在新缓冲区中执行的命令 [从%s] "
#: src/files.c:1073
#, fuzzy
msgid "Command to execute"
msgstr "执行的命令 [从%s] "
#: src/files.c:1079
#, fuzzy, c-format
msgid "File to insert into new buffer [from %s]"
msgstr "要插入新缓冲区的文件 [从%s] "
#: src/files.c:1082
#, fuzzy, c-format
msgid "File to insert [from %s]"
msgstr "要插入的文件 [从%s] "
#: src/files.c:1220
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重缓冲区模式中此按键无效"
#: src/files.c:1440
#, fuzzy
msgid "Invalid operating directory\n"
msgstr "设定操作目录"
#: src/files.c:1506
#, fuzzy
msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
msgstr "写入备份文件失败,继续保存吗?(如果不确定请输入N)"
#: src/files.c:1625
#, c-format
msgid "Can't write outside of %s"
msgstr "无法写入%s 外部"
#: src/files.c:1707 src/files.c:1732 src/files.c:1750 src/files.c:1768
#: src/files.c:1780 src/files.c:1803
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "写入备份文件%s 出错:%s"
#: src/files.c:1708 src/nano.c:664
msgid "Too many backup files?"
msgstr "太多备份文件?"
#: src/files.c:1844 src/files.c:1866 src/help.c:57 src/help.c:124
#: src/text.c:2985 src/text.c:2997 src/text.c:3385 src/text.c:3396
#, c-format
msgid "Error writing temp file: %s"
msgstr "写入临时文件%s 出错"
#: src/files.c:1885 src/files.c:1895 src/files.c:1915 src/files.c:1932
#: src/files.c:1942 src/files.c:1974 src/files.c:1981
#, c-format
msgid "Error writing %s: %s"
msgstr "写入%s 出错:%s"
#: src/files.c:2020
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已写入%lu 行"
#: src/files.c:2116
msgid " [DOS Format]"
msgstr " [DOS 格式]"
#: src/files.c:2117
msgid " [Mac Format]"
msgstr " [Mac 格式]"
#: src/files.c:2119
msgid " [Backup]"
msgstr " [备份]"
#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2127
msgid "Prepend Selection to File"
msgstr "前引选择部份于文件"
#: src/files.c:2128
msgid "Append Selection to File"
msgstr "附加选择部份至文件"
#: src/files.c:2129
msgid "Write Selection to File"
msgstr "写入选择部份至文件"
#: src/files.c:2131
msgid "File Name to Prepend to"
msgstr "要前引于的文件名"
#: src/files.c:2132
msgid "File Name to Append to"
msgstr "要附加至的文件名"
#: src/files.c:2135
msgid "File Name to Write"
msgstr "要写入的文件名"
#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2248
msgid "File exists -- cannot overwrite"
msgstr ""
#: src/files.c:2258
#, fuzzy
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同的名称存档?"
#: src/files.c:2266
#, fuzzy, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "文件已存在,要覆盖吗?"
#: src/files.c:2287
#, fuzzy
msgid "File was modified since you opened it; continue saving? "
msgstr "在您打开文件后文件已被改变,是否继续保存?"
#: src/files.c:2712
msgid "(more)"
msgstr "(更多)"
#: src/files.c:2797
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下回车键继续\n"
#: src/files.c:2813
#, fuzzy, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"无法创建目录 %s%s\n"
"然而保存和载入搜索历史或光标位置需要它。\n"
#: src/files.c:2820
#, fuzzy, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路径%s 应为一个目录,但现在不是。\n"
"Nano 将无法载入或保存搜索历史或光标位置\n"
#: src/files.c:2842
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I tried to move\n"
"to the preferred location (%s) but encountered an error: %s"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并试图移动到默认位置(%s)。\n"
"此操作出现错误:%s"
#: src/files.c:2846
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I moved\n"
"to the preferred location (%s)\n"
"(see the nano FAQ about this change)"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并已移动到默认位置(%s)。\n"
"(关于这个变更请参阅Nano 常见问题解答)"
#: src/files.c:2928 src/files.c:2936 src/files.c:2959 src/files.c:2981
#, fuzzy, c-format
msgid "Error writing %s: %s\n"
msgstr "写入%s 出错:%s"
#. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters.
#: src/global.c:469
msgid "Exit"
msgstr "离开"
#: src/global.c:470
msgid "Close"
msgstr "关闭"
#: src/global.c:471
#, fuzzy
msgid "Uncut Text"
msgstr "还原剪切"
#: src/global.c:473
#, fuzzy
msgid "Unjustify"
msgstr "还原对齐"
#: src/global.c:479
msgid "Read File"
msgstr "读档"
#: src/global.c:480
msgid "Where Is"
msgstr "搜索"
#: src/global.c:481
msgid "Replace"
msgstr "替换"
#: src/global.c:482
msgid "Go To Line"
msgstr "跳行"
#: src/global.c:483
msgid "Prev Line"
msgstr "上行"
#: src/global.c:484
msgid "Next Line"
msgstr "下行"
#: src/global.c:485
msgid "Prev Page"
msgstr "上页"
#: src/global.c:486
msgid "Next Page"
msgstr "下页"
#: src/global.c:488
msgid "Justify"
msgstr "对齐"
#: src/global.c:489
msgid "FullJstify"
msgstr "全部对齐"
#: src/global.c:491
msgid "Refresh"
msgstr "刷新"
#. TRANSLATORS: Try to keep this string at most 12 characters.
#: src/global.c:493
msgid "WhereIs Next"
msgstr "何处是下一个"
#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:498
msgid "Cancel the current function"
msgstr "取消当前功能"
#: src/global.c:499
msgid "Display this help text"
msgstr "显示帮助"
#: src/global.c:502
msgid "Close the current file buffer / Exit from nano"
msgstr "关闭当前文件缓冲区 / 离开 nano"
#: src/global.c:504
msgid "Exit from nano"
msgstr "离开 nano"
#: src/global.c:508
msgid "Write the current file to disk"
msgstr "写入当前文件至磁盘"
#: src/global.c:510
msgid "Insert another file into the current one"
msgstr "插入其他文件至当前文件"
#: src/global.c:512
msgid "Search for a string or a regular expression"
msgstr "查找字符串或正则表示式"
#: src/global.c:514
#, fuzzy
msgid "Search for a string"
msgstr "查找字符串或正则表示式"
#: src/global.c:515
msgid "Refresh the file list"
msgstr ""
#: src/global.c:517
#, fuzzy
msgid "Go to lefthand column"
msgstr "跳至指定行与列位置"
#: src/global.c:518
#, fuzzy
msgid "Go to righthand column"
msgstr "跳至指定行与列位置"
#: src/global.c:519
#, fuzzy
msgid "Go to first row in this column"
msgstr "跳至文件第一列"
#: src/global.c:520
#, fuzzy
msgid "Go to last row in this column"
msgstr "跳至文件最后一列"
#: src/global.c:523
#, fuzzy
msgid "Go one screenful up"
msgstr "跳至后一屏"
#: src/global.c:524
#, fuzzy
msgid "Go one screenful down"
msgstr "跳至后一屏"
#: src/global.c:526
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪切当前这行并存至剪贴板"
#: src/global.c:528
msgid "Uncut from the cutbuffer into the current line"
msgstr "从剪贴板粘贴至当前行"
#: src/global.c:529
msgid "Display the position of the cursor"
msgstr "显示光标位置"
#: src/global.c:531
msgid "Invoke the spell checker, if available"
msgstr "尝试运行拼写检查"
#: src/global.c:533
msgid "Replace a string or a regular expression"
msgstr "替换字符串或正则表示式"
#: src/global.c:534
msgid "Go to line and column number"
msgstr "跳至指定行与列位置"
#: src/global.c:535
#, fuzzy
msgid "Repeat the last search"
msgstr "重复上次搜索"
#: src/global.c:537
#, fuzzy
msgid "Mark text starting from the cursor position"
msgstr "标记游标所在文字"
#: src/global.c:539
msgid "Copy the current line and store it in the cutbuffer"
msgstr "拷贝当前行至剪贴板"
#: src/global.c:540
msgid "Indent the current line"
msgstr "缩进当前行"
#: src/global.c:541
msgid "Unindent the current line"
msgstr "取消缩进当前行"
#: src/global.c:542
msgid "Undo the last operation"
msgstr "撤销上次操作"
#: src/global.c:543
msgid "Redo the last undone operation"
msgstr "重做撤销的操作"
#: src/global.c:545
msgid "Go back one character"
msgstr "向后跳一字符"
#: src/global.c:546
msgid "Go forward one character"
msgstr "向前跳一字符"
#: src/global.c:547
msgid "Go back one word"
msgstr "向后跳一个词"
#: src/global.c:548
msgid "Go forward one word"
msgstr "向前跳一个词"
#: src/global.c:549
msgid "Go to previous line"
msgstr "跳至前一行"
#: src/global.c:550
msgid "Go to next line"
msgstr "跳至后一行"
#: src/global.c:551
msgid "Go to beginning of current line"
msgstr "跳至当前行首"
#: src/global.c:552
msgid "Go to end of current line"
msgstr "跳至当前行尾"
#: src/global.c:553
#, fuzzy
msgid "Go to previous block of text"
msgstr "跳至前一行"
#: src/global.c:554
#, fuzzy
msgid "Go to next block of text"
msgstr "跳至后一行"
#: src/global.c:557
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至当前段落开头,如已在段落开头,则调至上一段落起始处"
#: src/global.c:559
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至当前段落结尾,如已在段落结尾,则调至下一段落结尾"
#: src/global.c:561
msgid "Go to the first line of the file"
msgstr "跳至文件第一行"
#: src/global.c:562
msgid "Go to the last line of the file"
msgstr "跳至文件最后一行"
#: src/global.c:564
msgid "Go to the matching bracket"
msgstr "移动至对应括号"
#: src/global.c:566
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上卷动一行但不卷动游标"
#: src/global.c:568
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下卷动一行但不卷动游标"
#: src/global.c:571
msgid "Switch to the previous file buffer"
msgstr "切换至上个文件缓冲区"
#: src/global.c:572
msgid "Switch to the next file buffer"
msgstr "切换至下个文件缓冲区"
#: src/global.c:574
msgid "Insert the next keystroke verbatim"
msgstr "插入下一按键原型"
#: src/global.c:575
msgid "Insert a tab at the cursor position"
msgstr "插入制表符于游标位置"
#: src/global.c:576
msgid "Insert a newline at the cursor position"
msgstr "插入新行于游标位置"
#: src/global.c:577
msgid "Delete the character under the cursor"
msgstr "删除游标之下的字符"
#: src/global.c:579
msgid "Delete the character to the left of the cursor"
msgstr "删除游标左侧的字符"
#: src/global.c:582
#, fuzzy
msgid "Cut backward from cursor to word start"
msgstr "从游标剪切至行尾"
#: src/global.c:584
#, fuzzy
msgid "Cut forward from cursor to next word start"
msgstr "从游标剪切至行尾"
#: src/global.c:586
msgid "Cut from the cursor position to the end of the file"
msgstr "从游标位置剪切至文件结尾"
#: src/global.c:589
msgid "Justify the current paragraph"
msgstr "对齐当前段落"
#: src/global.c:590
msgid "Justify the entire file"
msgstr "对齐整个文件"
#: src/global.c:594
msgid "Count the number of words, lines, and characters"
msgstr "计算字数、行数与字符数"
#: src/global.c:597
msgid "Refresh (redraw) the current screen"
msgstr "重新显示当前画面"
#: src/global.c:599
#, fuzzy
msgid "Suspend the editor (if suspension is enabled)"
msgstr "暂停编辑器(如果启用了暂停)"
#: src/global.c:601
#, fuzzy
msgid "Try and complete the current word"
msgstr "缩进当前行"
#: src/global.c:605
msgid "Comment/uncomment the current line or marked lines"
msgstr ""
#: src/global.c:608
msgid "Save file without prompting"
msgstr ""
#: src/global.c:609
msgid "Search next occurrence backward"
msgstr ""
#: src/global.c:610
msgid "Search next occurrence forward"
msgstr ""
#: src/global.c:613
msgid "Toggle the case sensitivity of the search"
msgstr "切换查找的区分大小写选项"
#: src/global.c:615
msgid "Reverse the direction of the search"
msgstr "反转搜索方向"
#: src/global.c:617
msgid "Toggle the use of regular expressions"
msgstr "切换使用正则表示式"
#: src/global.c:620
msgid "Recall the previous search/replace string"
msgstr "编辑前次搜索/替换字符串"
#: src/global.c:622
msgid "Recall the next search/replace string"
msgstr "编辑下次搜索/替换字符串"
#: src/global.c:625
msgid "Toggle the use of DOS format"
msgstr "切换使用DOS 格式"
#: src/global.c:626
msgid "Toggle the use of Mac format"
msgstr "切换使用Mac 格式"
#: src/global.c:627
msgid "Toggle appending"
msgstr "切换追加"
#: src/global.c:628
msgid "Toggle prepending"
msgstr "切换前置插入"
#: src/global.c:629
msgid "Toggle backing up of the original file"
msgstr "切换储存既有文件的备份"
#: src/global.c:630
msgid "Execute external command"
msgstr "执行外部命令"
#: src/global.c:633
msgid "Toggle the use of a new buffer"
msgstr "切换使用新缓冲区"
#: src/global.c:635
msgid "Close buffer without saving it"
msgstr ""
#: src/global.c:637
msgid "Go to file browser"
msgstr "打开文件选单"
#: src/global.c:638
msgid "Exit from the file browser"
msgstr "从文件选单离开"
#: src/global.c:639
msgid "Go to the first file in the list"
msgstr "跳至文件第一列"
#: src/global.c:640
msgid "Go to the last file in the list"
msgstr "跳至文件最后一列"
#: src/global.c:641
msgid "Go to the previous file in the list"
msgstr "跳至列表中的前一个文件"
#: src/global.c:642
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一个文件"
#: src/global.c:643
msgid "Go to directory"
msgstr "跳至目录"
#: src/global.c:646
#, fuzzy
msgid "Invoke the linter, if available"
msgstr "尝试运行拼写检查"
#: src/global.c:647
#, fuzzy
msgid "Go to previous linter msg"
msgstr "跳至前一行"
#: src/global.c:648
#, fuzzy
msgid "Go to next linter msg"
msgstr "跳至后一行"
#: src/global.c:650
#, fuzzy
msgid "Invoke formatter, if available"
msgstr "尝试运行拼写检查"
#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:665
msgid "Get Help"
msgstr "求助"
#: src/global.c:668 src/prompt.c:719
msgid "Cancel"
msgstr "取消"
#: src/global.c:681
#, fuzzy
msgid "Write Out"
msgstr "写入"
#: src/global.c:717
msgid "Go To Dir"
msgstr "跳至目录"
#: src/global.c:730
msgid "Cut Text"
msgstr "剪切文字"
#: src/global.c:745
msgid "To Spell"
msgstr "拼写检查"
#: src/global.c:749
#, fuzzy
msgid "To Linter"
msgstr "跳行"
#: src/global.c:752
#, fuzzy
msgid "Formatter"
msgstr "DOS 格式"
#: src/global.c:758
msgid "Cur Pos"
msgstr "游标位置"
#: src/global.c:770
msgid "Undo"
msgstr "撤销"
#: src/global.c:772
msgid "Redo"
msgstr "重做"
#: src/global.c:775
msgid "Mark Text"
msgstr "标记文字"
#: src/global.c:777
msgid "Copy Text"
msgstr "复制文字"
#: src/global.c:781
msgid "Case Sens"
msgstr "区分大小写"
#: src/global.c:783
msgid "Regexp"
msgstr "正则表达式"
#: src/global.c:785
msgid "Backwards"
msgstr "向后搜索"
#: src/global.c:791
msgid "No Replace"
msgstr "不替换"
#: src/global.c:803
#, fuzzy
msgid "To Bracket"
msgstr "并非一个括号"
#: src/global.c:809
msgid "Previous"
msgstr ""
#: src/global.c:811
#, fuzzy
msgid "Next"
msgstr "下行"
#: src/global.c:815 src/global.c:820
msgid "Back"
msgstr "向后"
#: src/global.c:817 src/global.c:822
msgid "Forward"
msgstr "向前"
#: src/global.c:826
msgid "Prev Word"
msgstr "前一个字"
#: src/global.c:828
msgid "Next Word"
msgstr "后一个字"
#: src/global.c:831
msgid "Home"
msgstr "顶端"
#: src/global.c:833
msgid "End"
msgstr "尾端"
#: src/global.c:841
msgid "Scroll Up"
msgstr "向上卷动"
#: src/global.c:843
msgid "Scroll Down"
msgstr "向下卷动"
#: src/global.c:847
#, fuzzy
msgid "Prev Block"
msgstr "前一个字"
#: src/global.c:849
#, fuzzy
msgid "Next Block"
msgstr "后一个字"
#: src/global.c:852
msgid "Beg of Par"
msgstr "段落开头"
#: src/global.c:854
msgid "End of Par"
msgstr "段落结尾"
#: src/global.c:863
msgid "First Line"
msgstr "首行"
#: src/global.c:865
msgid "Last Line"
msgstr "尾行"
#: src/global.c:869
#, fuzzy
msgid "Prev File"
msgstr "上个文件"
#: src/global.c:871
msgid "Next File"
msgstr "下个文件"
#: src/global.c:887
msgid "Tab"
msgstr "制表符"
#: src/global.c:889
msgid "Enter"
msgstr "回车"
#: src/global.c:892
msgid "Delete"
msgstr "删除"
#: src/global.c:894
msgid "Backspace"
msgstr "退格"
#. TRANSLATORS: The next two strings refer to cutting words.
#: src/global.c:905
#, fuzzy
msgid "Cut Left"
msgstr "剪切文字"
#: src/global.c:907
msgid "Cut Right"
msgstr ""
#: src/global.c:909
msgid "CutTillEnd"
msgstr "删至末端"
#: src/global.c:919
msgid "Word Count"
msgstr "字数统计"
#: src/global.c:923
#, fuzzy
msgid "Verbatim"
msgstr "原形输入"
#: src/global.c:929
msgid "Suspend"
msgstr "暂停"
#: src/global.c:933
msgid "Indent Text"
msgstr "缩进文字"
#: src/global.c:935
msgid "Unindent Text"
msgstr "取消缩进"
#: src/global.c:939
msgid "Complete"
msgstr ""
#: src/global.c:943
#, fuzzy
msgid "Comment Lines"
msgstr "下行"
#: src/global.c:947
msgid "Save"
msgstr ""
#: src/global.c:953
msgid "PrevHstory"
msgstr "前一记录"
#: src/global.c:956
msgid "NextHstory"
msgstr "后一记录"
#: src/global.c:965
msgid "Go To Text"
msgstr "跳至文字"
#: src/global.c:969
msgid "DOS Format"
msgstr "DOS 格式"
#: src/global.c:971
msgid "Mac Format"
msgstr "Mac 格式"
#: src/global.c:979
msgid "Append"
msgstr "附加"
#: src/global.c:981
msgid "Prepend"
msgstr "前引"
#: src/global.c:984
msgid "Backup File"
msgstr "备份文件"
#: src/global.c:991
msgid "Execute Command"
msgstr "执行命令"
#: src/global.c:1006
msgid "To Files"
msgstr "文件选单"
#: src/global.c:1014
msgid "First File"
msgstr "首文件"
#: src/global.c:1016
msgid "Last File"
msgstr "末文件"
#: src/global.c:1020
msgid "Discard buffer"
msgstr ""
#: src/global.c:1029
msgid "Left Column"
msgstr ""
#: src/global.c:1031
msgid "Right Column"
msgstr ""
#: src/global.c:1033
msgid "Top Row"
msgstr ""
#: src/global.c:1035
msgid "Bottom Row"
msgstr ""
#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1042
#, fuzzy
msgid "Prev Lint Msg"
msgstr "上行"
#: src/global.c:1044
#, fuzzy
msgid "Next Lint Msg"
msgstr "下行"
#. TRANSLATORS: The next seventeen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1361
msgid "Help mode"
msgstr "辅助模式"
#: src/global.c:1363
msgid "Constant cursor position display"
msgstr "持续显示游标位置"
#: src/global.c:1365
msgid "Use of one more line for editing"
msgstr "编辑时使用多一行"
#: src/global.c:1367
msgid "Smooth scrolling"
msgstr "平滑式卷动画面"
#: src/global.c:1369
#, fuzzy
msgid "Soft wrapping of overlong lines"
msgstr "不要自动换行"
#: src/global.c:1371
msgid "Whitespace display"
msgstr "显示空格"
#: src/global.c:1373
msgid "Color syntax highlighting"
msgstr "语法色彩高亮"
#: src/global.c:1375
msgid "Smart home key"
msgstr "智能HOME 键"
#: src/global.c:1377
msgid "Auto indent"
msgstr "自动缩进"
#: src/global.c:1379
msgid "Cut to end"
msgstr "剪切至行尾"
#: src/global.c:1381
#, fuzzy
msgid "Hard wrapping of overlong lines"
msgstr "不要自动换行"
#: src/global.c:1383
msgid "Conversion of typed tabs to spaces"
msgstr "已输入制表符至空白的转换"
#: src/global.c:1385
msgid "Backup files"
msgstr "备份文件"
#: src/global.c:1387
msgid "Reading file into separate buffer"
msgstr ""
#: src/global.c:1389
msgid "Mouse support"
msgstr "鼠标支持"
#: src/global.c:1391
msgid "No conversion from DOS/Mac format"
msgstr "不从 DOS/Mac 格式转换"
#: src/global.c:1393
msgid "Suspension"
msgstr "暂停"
#: src/global.c:1395
msgid "Line numbering"
msgstr ""
#: src/help.c:305
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search. "
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符,然后按下回车键。如果存在着符合您所输入的文"
"字,画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
"最近一次搜索的字符串将会显示在搜索提示符后的括号中。不输入任何文字而直接按下"
"回车键则会重复使用最近一次的搜索条件。"
#: src/help.c:314
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已经用标记选择了一段文字并进行搜索替换,就只有在选择文字中符合者将会被"
"替换。\n"
"\n"
" 以下的功能键可用于搜索模式:\n"
"\n"
#: src/help.c:320
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter. If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳行辅助说明\n"
"\n"
" 首先输入您想去的行数编号并按下回车键。如果文章中的行数比您所输入少,您将会被"
"带至文件的最后一行。\n"
"\n"
" 以下的功能键可用于跳行模式:\n"
"\n"
#: src/help.c:329
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers). "
msgstr ""
"插入文件辅助说明\n"
"\n"
" 先把文件的名称键入,它将会插入在当前缓冲区的游标所在之处。\n"
"\n"
" 如果您所编译的 nano 支持多重文件缓冲区,并且将此功能以命令列旗标-F 或--"
"multibuffer、Meta-F 开关,或者 nanorc 文件来启动的话,所插入的文件 将会被载入"
"另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。 "
#: src/help.c:338
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一个空的缓冲区,那就不要输入任何文件名,或是在提示符号后键入一个"
"不存在的文件名,然后按下回车键。\n"
"\n"
" 以下的功能键可用于插入文件模式:\n"
"\n"
#: src/help.c:344
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file. To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"写入文件辅助说明\n"
"\n"
" 先键入您想要以此来储存当前文件的名称,并按下回车键来储存文件。\n"
"\n"
" 如果已经用标记选择了文字,那么您将会被提示,只储存标记部份到另外的档案。为了"
"降低当前文件只被其中部份覆盖的机会,在此模式下,当前的文件名不会成为默认"
"值。\n"
"\n"
" 以下的功能键可用于写入文件模式:\n"
"\n"
#: src/help.c:358
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing. You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory. To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"文件选单辅助说明\n"
"\n"
" 文件选单是用来视觉化浏览目录结构,以选取要读出或写入的文件。您可以 使用上下"
"左右键或上页/下页来浏览并用S 或回车键来选取所要的文件或者进入所选的目录。要"
"跳到上层时,选择在文件列表顶端名为 \"..\" 的目录。\n"
"\n"
" 以下的功能键可用于文件选单:\n"
"\n"
#: src/help.c:371
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter. If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt. Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符,然后按下回车键。如果存在著 符合您所输入的"
"文字,画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
" 最近一次搜索的字符串将会显示在搜索提示符号后面的括号中。不输入任何文字而直接"
"按下回车键则会重复最近一次的搜索条件。\n"
"\n"
#: src/help.c:380
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
"在搜索模式可使用如下的功能键:\n"
"\n"
#: src/help.c:384
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目录辅助说明\n"
"\n"
" 先输入您想要浏览的目录名称。\n"
"\n"
" 如果制表符补全的功能没有被关闭,您可以利用制表符(尝试)自动补全目录名称。\n"
"\n"
" 以下的功能键可用于跳至目录模式:\n"
"\n"
#: src/help.c:397
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file. "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited. It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼写检查辅助说明\n"
"\n"
" 拼写检查程序会检查当前文件中所有文字的拼法。当遇到一个未知的字,它会 被标记"
"起来,并让您编辑替代文字。对于当前文件中每一个拼错的字,都会显示 替换的提示;"
"或者,如果已经用标记选择了文字的话,那就只作用于选取的文字之中。\n"
"\n"
" 以下的功能键可用于拼写检查模式:\n"
"\n"
#: src/help.c:412
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode). If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"执行命令辅助说明\n"
"\n"
" 本选单允许您将shell 执行的命令输出结果,插入当前的缓冲区(或是多重缓冲区模式"
"下的新缓冲区)。如果您需要另一个空白缓冲区,就不要输入任何命令。\n"
"\n"
" 以下的功能键可用于执行命令模式:\n"
"\n"
#: src/help.c:425
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor. There are four main sections of the editor. The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified. Next is the main editor window "
"showing the file being edited. The status line is the third line from the "
"bottom and shows important messages. "
msgstr ""
"nano 辅助说明\n"
"\n"
" nano 编辑器是设计来在功能性及易用性方面模仿华盛顿大学的Pico 文字编辑器。它"
"包括四个主要部份:顶行显示程序版本、当前被编辑的文件名, 以及是否这文件已经更"
"动过。接着是主要编辑区,显示正在编辑的文件。状态行位于倒数第三行,用来显示重"
"要的信息。底部的两行则显示编辑器中最常用到的快捷键。\n"
"\n"
" "
#: src/help.c:435
#, fuzzy
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice. Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup. "
msgstr ""
"快捷键的记号定义如下:控制键组(Control-key) 序列是以一个 \"帽子\" (caret, ^)"
"符号来表示它可以通过Ctrl键或是按两次Esc 键来输入。脱离键组(Escape-key) 序列"
"是以\"中介\" (Meta, M) 符号表示它可以依照您的键盘设定利用EscAlt 或Meta "
"来输入。"
#: src/help.c:442
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value. The "
"following keystrokes are available in the main editor window. Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外按Esc 两次之后再键入从000 到255 之间的三位数字则会输入该ASCII 码对应"
"的字符。下列按键组合可用于主要编辑区,替代按键则显示于括号内“\n"
"\n"
#: src/help.c:474 src/help.c:555
msgid "enable/disable"
msgstr "启用/关闭"
#: src/nano.c:535
#, fuzzy
msgid "Key is invalid in view mode"
msgstr "观看模式中此按键无效"
#: src/nano.c:541
#, fuzzy
msgid "This function is disabled in restricted mode"
msgstr "在限制模式中无法跳至%s 外部"
#: src/nano.c:549
msgid "Help is not available"
msgstr ""
#: src/nano.c:658
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"缓冲内容已写入 %s\n"
#: src/nano.c:660
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"缓冲内容未写入至 %s%s\n"
#: src/nano.c:663
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"缓冲区未写入:%s\n"
#: src/nano.c:778
#, fuzzy, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [选项] [[+行,列] 文件名]...\n"
"\n"
#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:781
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename. The column number can be added after a comma.\n"
msgstr ""
#: src/nano.c:783
#, c-format
msgid ""
"When the first filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""
#: src/nano.c:784
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "选项\t\tGNU 长选项\t\t意义\n"
#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output. Try to keep them at most 40 characters.
#: src/nano.c:789
msgid "Enable smart home key"
msgstr "启用智能 HOME 键"
#: src/nano.c:791
msgid "Save backups of existing files"
msgstr "储存既有文件的备份"
#: src/nano.c:792
msgid "-C <dir>"
msgstr "-C <目录>"
#: src/nano.c:792
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目录>"
#: src/nano.c:793
msgid "Directory for saving unique backup files"
msgstr "用以储存独一备份文件的目录"
#: src/nano.c:796
msgid "Use bold instead of reverse video text"
msgstr "用粗体替代颜色反转"
#: src/nano.c:798
msgid "Convert typed tabs to spaces"
msgstr "将已输入的制表符转换为空白"
#: src/nano.c:803
msgid "Read a file into a new buffer by default"
msgstr ""
#: src/nano.c:806
msgid "Use (vim-style) lock files"
msgstr ""
#: src/nano.c:811
msgid "Log & read search/replace string history"
msgstr "记录与读取搜索/替换的历史字符串"
#: src/nano.c:815
msgid "Don't look at nanorc files"
msgstr "不要参考nanorc 文件"
#: src/nano.c:818
msgid "Fix numeric keypad key confusion problem"
msgstr "修正数字键区按键混淆问题"
#: src/nano.c:820
msgid "Don't add newlines to the ends of files"
msgstr "不要将换行加到文件末端"
#: src/nano.c:823
msgid "Don't convert files from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"
#: src/nano.c:825
msgid "Use one more line for editing"
msgstr "编辑时多使用一行"
#: src/nano.c:829
msgid "Log & read location of cursor position"
msgstr "记录并读取光标位置"
#: src/nano.c:832
msgid "-Q <str>"
msgstr "-Q <字符串>"
#: src/nano.c:832
msgid "--quotestr=<str>"
msgstr "--quotestr=<字符串>"
#: src/nano.c:832
msgid "Quoting string"
msgstr "引用代表字符串"
#: src/nano.c:835
msgid "Restricted mode"
msgstr "限制模式"
#: src/nano.c:837
msgid "Scroll by line instead of half-screen"
msgstr "按行滚动而不是半屏"
#: src/nano.c:839
msgid "-T <#cols>"
msgstr "-T <#列数>"
#: src/nano.c:839
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#列数>"
#: src/nano.c:840
msgid "Set width of a tab to #cols columns"
msgstr "设定制表符宽度为 #列数"
#: src/nano.c:841
msgid "Do quick statusbar blanking"
msgstr "状态行快速闪动"
#: src/nano.c:842
msgid "Print version information and exit"
msgstr "显示版本资讯并离开"
#: src/nano.c:845
msgid "Detect word boundaries more accurately"
msgstr "更正确地侦测单字边界"
#: src/nano.c:846
#, fuzzy
msgid "-X <str>"
msgstr "-Q <字符串>"
#: src/nano.c:846
#, fuzzy
msgid "--wordchars=<str>"
msgstr "--quotestr=<字符串>"
#: src/nano.c:847
msgid "Which other characters are word parts"
msgstr ""
#: src/nano.c:851
msgid "-Y <name>"
msgstr ""
#: src/nano.c:851
#, fuzzy
msgid "--syntax=<name>"
msgstr "--syntax=<字符串>"
#: src/nano.c:852
msgid "Syntax definition to use for coloring"
msgstr "用于加亮的语法定义"
#: src/nano.c:854
msgid "Constantly show cursor position"
msgstr "持续显示游标位置"
#: src/nano.c:856
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正退格键/删除键混淆问题"
#: src/nano.c:859
#, fuzzy
msgid "Show cursor in file browser"
msgstr "打开文件选单"
#: src/nano.c:861
#, fuzzy
msgid "Show this help text and exit"
msgstr "显示帮助"
#: src/nano.c:863
msgid "Automatically indent new lines"
msgstr "自动缩进新行"
#: src/nano.c:864
msgid "Cut from cursor to end of line"
msgstr "从游标剪切至行尾"
#: src/nano.c:867
msgid "Show line numbers in front of the text"
msgstr ""
#: src/nano.c:870
msgid "Enable the use of the mouse"
msgstr "启用鼠标功能"
#: src/nano.c:872
msgid "Do not read the file (only write it)"
msgstr ""
#: src/nano.c:874
msgid "-o <dir>"
msgstr "-o <目录>"
#: src/nano.c:874
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目录>"
#: src/nano.c:875
msgid "Set operating directory"
msgstr "设定操作目录"
#: src/nano.c:877
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留XON (^Q) 和XOFF (^S) 按键"
#: src/nano.c:881
msgid "Silently ignore startup issues like rc file errors"
msgstr "沉默忽略启动问题, 比如rc 文件错误"
#: src/nano.c:884
msgid "-r <#cols>"
msgstr "-r <#列数>"
#: src/nano.c:884
msgid "--fill=<#cols>"
msgstr "--fill=<#列数>"
#: src/nano.c:885
#, fuzzy
msgid "Set hard-wrapping point at column #cols"
msgstr "设定折行宽度为 #列数"
#: src/nano.c:889
msgid "-s <prog>"
msgstr "-s <程序>"
#: src/nano.c:889
msgid "--speller=<prog>"
msgstr "--speller=<程序>"
#: src/nano.c:890
msgid "Enable alternate speller"
msgstr "启用替代的拼写检查程序"
#: src/nano.c:892
msgid "Auto save on exit, don't prompt"
msgstr "离开时自动储存,不要提示"
#: src/nano.c:894
msgid "Save a file by default in Unix format"
msgstr ""
#: src/nano.c:896
msgid "View mode (read-only)"
msgstr "查看(只读)模式"
#: src/nano.c:898
#, fuzzy
msgid "Don't hard-wrap long lines"
msgstr "不要自动换行"
#: src/nano.c:900
msgid "Don't show the two help lines"
msgstr "不要显示辅助区"
#: src/nano.c:902
msgid "Enable suspension"
msgstr "启用暂停功能"
#: src/nano.c:904
msgid "Enable soft line wrapping"
msgstr "启用软换行"
#: src/nano.c:916
#, fuzzy, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano 版本%s (编译于%s, %s)\n"
#: src/nano.c:919
#, c-format
msgid " (C) 2014-%s the contributors to nano\n"
msgstr ""
#: src/nano.c:920
#, fuzzy, c-format
msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
msgstr " 电子邮件: nano@nano-editor.org\t\t网页: http://www.nano-editor.org/"
#: src/nano.c:921
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 编译选项:"
#: src/nano.c:1067
msgid "No file name"
msgstr ""
#: src/nano.c:1069
msgid "Save modified buffer? (Answering \"No\" will DISCARD changes.) "
msgstr ""
#: src/nano.c:1126
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "正在从标准输入读入,可用 ^C 中断\n"
#: src/nano.c:1153
#, c-format
msgid "Failed to open stdin: %s"
msgstr ""
#: src/nano.c:1165
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "对不起,无法从键盘设备重新打开标准输入\n"
#: src/nano.c:1234
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到SIGHUP 或SIGTERM\n"
#: src/nano.c:1249
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "使用\"fg\" 返回nano\n"
#: src/nano.c:1267
msgid "Suspension is not enabled"
msgstr ""
#: src/nano.c:1412
msgid "enabled"
msgstr "已启用"
#: src/nano.c:1412
msgid "disabled"
msgstr "已禁用"
#: src/nano.c:1549
msgid "Unbound key"
msgstr ""
#: src/nano.c:1552
msgid "Unbindable key: M-["
msgstr ""
#: src/nano.c:1554
#, c-format
msgid "Unbound key: M-%c"
msgstr ""
#: src/nano.c:1556
#, c-format
msgid "Unbound key: ^%c"
msgstr ""
#: src/nano.c:1558
#, c-format
msgid "Unbound key: %c"
msgstr ""
#: src/nano.c:1731
msgid "XON ignored, mumble mumble"
msgstr "忽略XON嗯嗯。"
#: src/nano.c:1736
msgid "XOFF ignored, mumble mumble"
msgstr "忽略XOFF嗯嗯。"
#: src/nano.c:2107 src/rcfile.c:1219
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的制表符宽度%s 无效"
#: src/nano.c:2172 src/rcfile.c:1156
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填满行数\"%s\" 无效"
#: src/nano.c:2226
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr ""
#: src/nano.c:2542 src/search.c:858
msgid "Invalid line or column number"
msgstr "无效的列号或行号"
#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy", for both "Oui" and "Yes".
#: src/prompt.c:681
msgid "Yy"
msgstr "Yy"
#: src/prompt.c:682
msgid "Nn"
msgstr "Nn"
#: src/prompt.c:683
msgid "Aa"
msgstr "Aa"
#: src/prompt.c:706
msgid "Yes"
msgstr "是"
#: src/prompt.c:711
msgid "All"
msgstr "全部"
#: src/prompt.c:716
msgid "No"
msgstr "否"
#: src/rcfile.c:153
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在%s(第%lu 行)中发生错误:"
#: src/rcfile.c:212
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "参数%s 有未封闭的 \""
#: src/rcfile.c:240 src/rcfile.c:694 src/rcfile.c:749 src/rcfile.c:853
msgid "Regex strings must begin and end with a \" character"
msgstr "正则表示式字符串必须以 \" 字符开始及结束"
#: src/rcfile.c:266 src/search.c:53
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "非法的正则表示式 \"%s\": %s"
#: src/rcfile.c:288
msgid "Missing syntax name"
msgstr "缺少语法名称"
#: src/rcfile.c:297
msgid "A syntax name must be quoted"
msgstr ""
#: src/rcfile.c:306
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 语法已被保留"
#: src/rcfile.c:336
#, fuzzy
msgid "The \"default\" syntax does not accept extensions"
msgstr "\"default\" 语法必须不含任何副文件名"
#: src/rcfile.c:378
msgid "Missing key name"
msgstr "缺少键名称"
#: src/rcfile.c:387 src/rcfile.c:398
msgid "Key name is too short"
msgstr ""
#: src/rcfile.c:408
#, fuzzy
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "键绑定必须以\"^\", \"M\" 或 \"F\" 开始"
#: src/rcfile.c:416
#, fuzzy, c-format
msgid "Key name %s is invalid"
msgstr "所要求的制表符宽度%s 无效"
#: src/rcfile.c:425
#, fuzzy
msgid "Must specify a function to bind the key to"
msgstr "必须指定键绑定到的函数"
#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:435
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr ""
#: src/rcfile.c:442
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "无法映射名字\"%s\" 到一个函数"
#: src/rcfile.c:449
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "无法映射名字\"%s\" 到一个菜单"
#: src/rcfile.c:483
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr ""
#: src/rcfile.c:493
#, fuzzy, c-format
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "对不起,键\"%s\" 属非法绑定"
#: src/rcfile.c:597
#, fuzzy, c-format
msgid "Error expanding %s: %s"
msgstr "读取%s 出错:%s"
#: src/rcfile.c:636
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"颜色 %s 无法识别。\n"
"有效的颜色是 \"green\"(绿)、\"red\"(红)、\"blue\"(蓝)、\n"
"\"white\"(白)、\"yellow\"(黄)、\"cyan\"(青)、\"magenta\"(瑰)和\n"
"\"black\"(黑),选择性的前置字 \"bright\"(明亮) \n"
"可用于前景色。"
#: src/rcfile.c:657 src/rcfile.c:824 src/rcfile.c:887
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr ""
#: src/rcfile.c:663
msgid "Missing color name"
msgstr "缺少颜色名称"
#: src/rcfile.c:673 src/rcfile.c:836
#, fuzzy, c-format
msgid "Missing regex string after '%s' command"
msgstr "缺少颜色名称"
#: src/rcfile.c:705 src/rcfile.c:759
#, fuzzy
msgid "Empty regex string"
msgstr "缺少正则表示式字符串"
#: src/rcfile.c:743
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求对应的\"end=\""
#: src/rcfile.c:797
#, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色%s 不可为明亮"
#: src/rcfile.c:831
#, fuzzy, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "\"default\" 语法必须不含任何副文件名"
#: src/rcfile.c:892
#, fuzzy, c-format
msgid "Missing command after '%s'"
msgstr "缺少颜色名称"
#: src/rcfile.c:908
#, fuzzy, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "参数%s 有未封闭的 \""
#: src/rcfile.c:939
#, fuzzy, c-format
msgid "Fatal error: no keys mapped for function \"%s\". Exiting.\n"
msgstr "严重错误; 没有键映射到函数 \"%s\""
#: src/rcfile.c:941
#, fuzzy, c-format
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "正在退出。如果您想调整您的nanorc 设置请使用nano 的-I 选项。\n"
#: src/rcfile.c:996
#, fuzzy, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "无法映射名字\"%s\" 到一个菜单"
#: src/rcfile.c:1018 src/rcfile.c:1230
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "语法\"%s\" 没有color 命令"
#: src/rcfile.c:1049
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令\"%s\" 被禁止在包含文件中使用"
#: src/rcfile.c:1064
#, c-format
msgid "Command \"%s\" not understood"
msgstr "无法识别\"%s\" 命令"
#: src/rcfile.c:1076
#, fuzzy
msgid "Missing option"
msgstr "缺少颜色名称"
#: src/rcfile.c:1090
#, fuzzy, c-format
msgid "Unknown option \"%s\""
msgstr "未知旗标 %s"
#: src/rcfile.c:1103
#, fuzzy, c-format
msgid "Cannot unset option \"%s\""
msgstr "无法解除旗标 %s 设定"
#: src/rcfile.c:1115
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "选项%s 需要参数"
#: src/rcfile.c:1131
#, fuzzy
msgid "Argument is not a valid multibyte string"
msgstr "选项并非正确的多字节字符串"
#: src/rcfile.c:1168 src/rcfile.c:1189 src/rcfile.c:1196
msgid "Non-blank characters required"
msgstr "需要非空格字符"
#: src/rcfile.c:1175
msgid "Two single-column characters required"
msgstr "需要两个单行字符"
#: src/rcfile.c:1284
msgid "I can't find my home directory! Wah!"
msgstr "我找不到我的家目录!哇!"
#: src/rcfile.c:1299
#, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下回车键继续启动 nano\n"
#: src/search.c:86
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""
#. TRANSLATORS: The next three modify the search prompt.
#: src/search.c:154
msgid " [Case Sensitive]"
msgstr " [区分大小写]"
#: src/search.c:155
msgid " [Regexp]"
msgstr " [正则表示式]"
#: src/search.c:156
msgid " [Backwards]"
msgstr " [向后搜索]"
#. TRANSLATORS: The next two modify the search prompt.
#: src/search.c:159
msgid " (to replace) in selection"
msgstr " 在标记中(替换)"
#: src/search.c:161
msgid " (to replace)"
msgstr " (替换)"
#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:266
#, fuzzy
msgid "Searching..."
msgstr "搜索"
#. TRANSLATORS: This is a prompt.
#: src/search.c:631
msgid "Replace this instance?"
msgstr "替换这个?"
#. TRANSLATORS: This is a prompt.
#: src/search.c:768
msgid "Replace with"
msgstr "替换为"
#: src/search.c:800
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已替换%lu 处"
#. TRANSLATORS: This is a prompt.
#: src/search.c:836
msgid "Enter line number, column number"
msgstr "输入列号,行号"
#: src/search.c:1026
msgid "Not a bracket"
msgstr "并非一个括号"
#: src/search.c:1088
msgid "No matching bracket"
msgstr "无对应括号"
#: src/text.c:65
msgid "Mark Set"
msgstr "标记设定"
#: src/text.c:70
msgid "Mark Unset"
msgstr "标记解除"
#: src/text.c:82
#, c-format
msgid "Error invoking \"%s\""
msgstr "运行 \"%s\" 错误"
#: src/text.c:475
msgid "Commenting is not supported for this file type"
msgstr ""
#: src/text.c:491
msgid "Cannot comment past end of file"
msgstr ""
#: src/text.c:684
msgid "Nothing in undo buffer!"
msgstr "没有可撤销的操作!"
#. TRANSLATORS: Eight of the next nine strings describe actions
#. * that are undone or redone. It are all nouns, not verbs.
#: src/text.c:702 src/text.c:731 src/text.c:865 src/text.c:906
msgid "text add"
msgstr "文字增加"
#: src/text.c:712 src/text.c:876
msgid "text delete"
msgstr "文本删除"
#: src/text.c:735 src/text.c:915
msgid "line join"
msgstr "行合并"
#: src/text.c:754 src/text.c:931
msgid "text cut"
msgstr "文字剪切"
#: src/text.c:759 src/text.c:935
msgid "text uncut"
msgstr "取消剪切"
#: src/text.c:765 src/text.c:911
#, fuzzy
msgid "Internal error: line is missing. Please save your work."
msgstr "内部错误:重做设置失败。请保存您的工作"
#: src/text.c:769 src/text.c:885
msgid "line break"
msgstr "换行符"
#: src/text.c:781 src/text.c:955
msgid "comment"
msgstr ""
#: src/text.c:785 src/text.c:959
msgid "uncomment"
msgstr ""
#: src/text.c:789 src/text.c:946
msgid "text insert"
msgstr "文本插入"
#: src/text.c:806 src/text.c:939
msgid "text replace"
msgstr "文本替换"
#: src/text.c:813 src/text.c:963 src/text.c:1291 src/text.c:1455
msgid "Internal error: unknown type. Please save your work."
msgstr "内部错误:未知类型。请保存您的工作。"
#: src/text.c:819
#, c-format
msgid "Undid action (%s)"
msgstr "已撤销操作(%s)"
#: src/text.c:840
msgid "Nothing to re-do!"
msgstr "没有可重做的操作!"
#: src/text.c:849
#, fuzzy
msgid "Internal error: cannot set up redo. Please save your work."
msgstr "内部错误:无法配置取消剪切。请保存您的工作"
#: src/text.c:969
#, c-format
msgid "Redid action (%s)"
msgstr "已重做操作(%s)"
#: src/text.c:1068 src/text.c:2678 src/text.c:3064
msgid "Could not create pipe"
msgstr "无法建立管线功能"
#: src/text.c:1094 src/text.c:2765 src/text.c:2892 src/text.c:3112
#: src/text.c:3429
msgid "Could not fork"
msgstr "执行功能无效"
#: src/text.c:2078
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字符串%s%s"
#: src/text.c:2443
msgid "Can now UnJustify!"
msgstr "现在可以还原对齐!"
#: src/text.c:2594
#, c-format
msgid "Unfindable word: %s"
msgstr ""
#: src/text.c:2610
msgid "Edit a replacement"
msgstr "编辑替代文字"
#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2625
#, fuzzy
msgid "Next word..."
msgstr "后一个字"
#: src/text.c:2680
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立错字列表,请稍待..."
#: src/text.c:2771 src/text.c:3119
msgid "Could not get size of pipe buffer"
msgstr "无法得知管线缓冲区大小"
#: src/text.c:2820
msgid "Error invoking \"spell\""
msgstr "运行 \"spell\" 错误"
#: src/text.c:2823
msgid "Error invoking \"sort -f\""
msgstr "运行 \"sort -f\" 错误"
#: src/text.c:2826
msgid "Error invoking \"uniq\""
msgstr "运行 \"uniq\" 错误"
#: src/text.c:3003
#, fuzzy
msgid "Invoking spell checker, please wait"
msgstr "尝试运行拼写检查"
#: src/text.c:3017
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼写检查失败:%s"
#: src/text.c:3019
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼写检查失败:%s%s"
#: src/text.c:3022
msgid "Finished checking spelling"
msgstr "拼写检查结束"
#: src/text.c:3047
#, fuzzy
msgid "No linter defined for this type of file!"
msgstr "不要将换行加到文件末端"
#: src/text.c:3052
msgid "Save modified buffer before linting?"
msgstr ""
#: src/text.c:3069
msgid "Invoking linter, please wait"
msgstr ""
#: src/text.c:3224
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr ""
#: src/text.c:3254
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr ""
#: src/text.c:3290
msgid "No more errors in unopened files, cancelling"
msgstr ""
#: src/text.c:3336
#, fuzzy
msgid "At last message"
msgstr "显示此信息"
#: src/text.c:3341
#, fuzzy
msgid "At first message"
msgstr "显示此信息"
#: src/text.c:3378
msgid "Finished"
msgstr ""
#: src/text.c:3402
msgid "Invoking formatter, please wait"
msgstr ""
#: src/text.c:3463
msgid "Finished formatting"
msgstr ""
#: src/text.c:3545
#, c-format
msgid "%sWords: %lu Lines: %ld Chars: %lu"
msgstr "%s字数: %lu 行数: %ld 字符数: %lu"
#: src/text.c:3546
msgid "In Selection: "
msgstr "于选择部份:"
#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3560
msgid "Verbatim Input"
msgstr "原形输入"
#: src/text.c:3756
msgid "No further matches"
msgstr ""
#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3760
#, fuzzy
msgid "No matches"
msgstr "无对应括号"
#: src/utils.c:328 src/utils.c:340
msgid "nano is out of memory!"
msgstr "nano 已耗尽内存!"
#: src/utils.c:518
#, fuzzy, c-format
msgid "Internal error: can't match line %ld. Please save your work."
msgstr "内部错误:无法匹配行 %d。请保存您的工作"
#: src/winio.c:147
msgid "Too many errors from stdin"
msgstr ""
#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not know about.
#: src/winio.c:1235
msgid "Unknown sequence"
msgstr ""
#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1399
#, fuzzy, c-format
msgid "Unicode Input: %s"
msgstr "Unicode 输入"
#: src/winio.c:1995
msgid "DIR:"
msgstr "目录:"
#: src/winio.c:2002
msgid "File:"
msgstr "文件:"
#: src/winio.c:2006 src/winio.c:2010
msgid "Modified"
msgstr "已更改"
#: src/winio.c:2008
msgid "View"
msgstr "查看"
#: src/winio.c:2134
msgid "Further warnings were suppressed"
msgstr ""
#: src/winio.c:3215
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "行 %ld/%ld (%d%%),列 %lu/%lu (%d%%),字符 %lu/%lu (%d%%)"
#: src/winio.c:3348
msgid "The nano text editor"
msgstr "nano 文本编辑器"
#: src/winio.c:3349
msgid "version"
msgstr "版本"
#: src/winio.c:3350
msgid "Brought to you by:"
msgstr "来自于:"
#: src/winio.c:3351
msgid "Special thanks to:"
msgstr "特别感谢:"
#: src/winio.c:3352
msgid "The Free Software Foundation"
msgstr "自由软体基金会"
#: src/winio.c:3353
msgid "the many translators and the TP"
msgstr ""
#: src/winio.c:3354
msgid "For ncurses:"
msgstr "ncurses 部份:"
#: src/winio.c:3355
msgid "and anyone else we forgot..."
msgstr "以及其他我们不记得的人..."
#: src/winio.c:3356
msgid "Thank you for using nano!"
msgstr "谢谢您使用 nano"
#~ msgid ""
#~ "Read %lu line (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式- 警告:无写入权限)"
#~ msgid ""
#~ "Read %lu line (Converted from Mac format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from Mac format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行 (转换自Mac 格式- 警告:无写入权限)"
#~ msgid ""
#~ "Read %lu line (Converted from DOS format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行 (转换自DOS 格式- 警告:无写入权限)"
#~ msgid "Read %lu line ( Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行(警告:无写入权限)"
#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 设定下,无法前引或附加至符号连结档"
#~ msgid "Window size is too small for nano...\n"
#~ msgstr "窗口尺寸对 nano 来说太小了...\n"
#~ msgid "Option\t\tMeaning\n"
#~ msgstr "选项\t\t意义\n"
#~ msgid "+LINE,COLUMN"
#~ msgstr "+行,列"
#~ msgid "Start at line LINE, column COLUMN"
#~ msgstr "从所指列数与行数开始"
#~ msgid "-Y <str>"
#~ msgstr "-Y <字符串>"
#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符号连结,而是覆盖"
#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "对不起,此功能的支持以禁用"
#~ msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
#~ msgstr "储存更动过的缓冲区吗(回答 \"No\" 会撤销修改)"
#~ msgid "Unknown Command"
#~ msgstr "未知命令"
#~ msgid "Cannot add a color command without a syntax command"
#~ msgstr "无法直接增加颜色而没有语法行"
#~ msgid "Cannot add a header regex without a syntax command"
#~ msgstr "无法直接增加头部正则表达式而没有语法行"
#~ msgid "Cannot add a magic string regex without a syntax command"
#~ msgstr "无法在没有语法命令的情况下添加魔字符串"
#~ msgid "Missing magic string name"
#~ msgstr "缺少魔字符串名称"
#, fuzzy
#~| msgid "Cannot add a header regex without a syntax command"
#~ msgid "Cannot add a linter without a syntax command"
#~ msgstr "无法直接增加头部正则表达式而没有语法行"
#, fuzzy
#~| msgid "Cannot add a color command without a syntax command"
#~ msgid "Cannot add formatter without a syntax command"
#~ msgstr "无法直接增加颜色而没有语法行"
#, fuzzy
#~| msgid "Internal error: can't setup uncut. Please save your work."
#~ msgid "Internal error: cannot set up uncut. Please save your work."
#~ msgstr "内部错误:无法配置取消剪切。请保存您的工作"
#~ msgid "Insert File"
#~ msgstr "插入文件"
#~ msgid "Go to previous screen"
#~ msgstr "跳至前一屏"
#~ msgid "Find Other Bracket"
#~ msgstr "寻找其他括号"
#~ msgid "Long line wrapping"
#~ msgstr "长行转换"
#~ msgid "Multiple file buffers"
#~ msgstr "多重文件缓冲区"
#~ msgid "Soft line wrapping"
#~ msgstr "软换行"
#~ msgid "Enable multiple file buffers"
#~ msgstr "启用多重文件缓冲区功能"
#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允许通用撤销[试验性特性]"
#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略为与Pico 相容)"
#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必须指定键绑定到的菜单(或 \"all\")"
#~ msgid "Missing flag"
#~ msgstr "缺少旗标"
#~ msgid "line wrap"
#~ msgstr "自动换行"
#~ msgid "Internal error: unknown type. Please save your work"
#~ msgstr "内部错误:未知类型。请保存您的工作"
#~ msgid "Could not pipe"
#~ msgstr "管线功能无效"
#~ msgid "line split"
#~ msgstr "行分割"