cbmk/include/lib.sh

224 lines
6.7 KiB
Bash
Raw Permalink Normal View History

# SPDX-License-Identifier: GPL-3.0-only
# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# Copyright (c) 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# Copyright (c) 2020-2024 Leah Rowe <leah@libreboot.org>
export LC_COLLATE=C
export LC_ALL=C
_ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0"
ifdtool="elf/ifdtool/default/ifdtool"
cbfstool="elf/cbfstool/default/cbfstool"
tmpgit="$PWD/tmp/gitclone"
make GRUB multi-tree and re-add xhci patches The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, but we still don't need xHCI support in Canoeboot's GRUB because none of the available coreboot targets have xHCI support. However, we may want it in the future and it helps to keep Canoeboot in sync with Libreboot (this patch is adapted from lbmk). Each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. There is another reason for merging this design change from lbmk, and that reasoning also applies to lbmk. Specifically: This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
grubdata="config/data/grub"
err="err_"
err_()
{
printf "ERROR %s: %s\n" "$0" "$1" 1>&2; exit 1
}
setvars()
{
_setvars="" && [ $# -lt 2 ] && $err "setvars: too few arguments"
val="$1" && shift 1 && for var in $@; do
_setvars="$var=\"$val\"; $_setvars"
done; printf "%s\n" "${_setvars% }"
}
chkvars()
{
for var in $@; do
eval "[ -n "\${$var+x}" ] || \$err \"$var unset\""
eval "[ -n "\$$var" ] || \$err \"$var unset\""
done; return 0
}
eval `setvars "" _nogit board xbmk_parent versiondate projectsite projectname \
aur_notice configdir datadir version relname`
for fv in projectname projectsite version versiondate; do
eval "[ ! -f "$fv" ] || read -r $fv < \"$fv\" || :"
done; chkvars projectname projectsite
setcfg()
{
[ $# -gt 1 ] && printf "e \"%s\" f missing && return %s;\n" "$1" "$2"
[ $# -gt 1 ] || \
printf "e \"%s\" f not && %s \"Missing config\";\n" "$1" "$err"
printf ". \"%s\" || %s \"Could not read config\";\n" "$1" "$err"
}
e()
{
es_t="e" && [ $# -gt 1 ] && es_t="$2"
es2="already exists"
estr="[ -$es_t \"\$1\" ] || return 1"
[ $# -gt 2 ] && estr="[ -$es_t \"\$1\" ] && return 1" && es2="missing"
eval "$estr"; printf "%s %s\n" "$1" "$es2" 1>&2
}
install_packages()
{
[ $# -lt 2 ] && $err "fewer than two arguments"
eval `setcfg "config/dependencies/$2"`
$pkg_add $pkglist || $err "Cannot install packages"
[ -n "$aur_notice" ] && \
printf "You need AUR packages: %s\n" "$aur_notice" 1>&2; return 0
}
[ $# -gt 0 ] && [ "$1" = "dependencies" ] && install_packages $@ && exit 0
id -u 1>/dev/null 2>/dev/null || $err "suid check failed (id -u)"
[ "$(id -u)" != "0" ] || $err "this command as root is not permitted"
[ -z "${TMPDIR+x}" ] || [ "${TMPDIR%_*}" = "/tmp/xbmk" ] || unset TMPDIR
[ -n "${TMPDIR+x}" ] && export TMPDIR="$TMPDIR"
if [ -z "${TMPDIR+x}" ]; then
[ -f "lock" ] && $err "$PWD/lock exists. Is a build running?"
export TMPDIR="/tmp"
export TMPDIR="$(mktemp -d -t xbmk_XXXXXXXX)"
touch lock || $err "cannot create 'lock' file"
xbmk_parent="y"
fi
# XBMK_CACHE is a directory, for caching downloads and git repositories
[ -z "${XBMK_CACHE+x}" ] && export XBMK_CACHE="$PWD/cache"
[ -z "$XBMK_CACHE" ] && export XBMK_CACHE="$PWD/cache"
[ -L "$XBMK_CACHE" ] && [ "$XBMK_CACHE" = "$PWD/cache" ] && \
$err "cachedir is default, $PWD/cache, but it exists and is a symlink"
[ -L "$XBMK_CACHE" ] && export XBMK_CACHE="$PWD/cache"
[ -f "$XBMK_CACHE" ] && $err "cachedir '$XBMK_CACHE' exists but it's a file"
# if "y": a coreboot target won't be built if target.cfg says release="n"
# (this is used to exclude certain build targets from releases)
[ -z "${XBMK_RELEASE+x}" ] && export XBMK_RELEASE="n"
[ "$XBMK_RELEASE" = "y" ] || export XBMK_RELEASE="n"
[ -z "${XBMK_THREADS+x}" ] && export XBMK_THREADS=1
expr "X$XBMK_THREADS" : "X-\{0,1\}[0123456789][0123456789]*$" \
1>/dev/null 2>/dev/null || export XBMK_THREADS=1 # user gave a non-integer
x_() {
[ $# -lt 1 ] || $@ || \
$err "Unhandled non-zero exit: $(echo "$@")"; return 0
}
[ -e ".git" ] || [ -f "version" ] || printf "unknown\n" > version || \
$err "Cannot generate unknown version file"
[ -e ".git" ] || [ -f "versiondate" ] || printf "1716415872\n" > versiondate \
|| $err "Cannot generate unknown versiondate file"
version_="$version"
[ ! -e ".git" ] || version="$(git describe --tags HEAD 2>&1)" || \
version="git-$(git rev-parse HEAD 2>&1)" || version="$version_"
versiondate_="$versiondate"
[ ! -e ".git" ] || versiondate="$(git show --no-patch --no-notes \
--pretty='%ct' HEAD)" || versiondate="$versiondate_"
for p in projectname version versiondate projectsite; do
chkvars "$p"; eval "x_ printf \"%s\\n\" \"\$$p\" > $p"
done
relname="$projectname-$version"
export LOCALVERSION="-$projectname-${version%%-*}"
check_defconfig()
{
[ -d "$1" ] || $err "Target '$1' not defined."
for x in "$1"/config/*; do
[ -f "$x" ] && printf "%s\n" "$x" && return 1
done; return 0
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
remkdir()
{
rm -Rf "$1" || $err "remkdir: !rm -Rf \"$1\""
mkdir -p "$1" || $err "remkdir: !mkdir -p \"$1\""
}
mkrom_tarball()
{
printf "%s\n" "$version" > "$1/version" || $err "$1 !version"
printf "%s\n" "$versiondate" > "$1/versiondate" || $err "$1 !vdate"
printf "%s\n" "$projectname" > "$1/projectname" || $err "$1 !pname"
mktarball "$1" "${1%/*}/${relname}_${1##*/}.tar.xz"; x_ rm -Rf "$1"; :
}
mktarball()
{
[ "${2%/*}" = "$2" ] || \
mkdir -p "${2%/*}" || $err "mk, !mkdir -p \"${2%/*}\""
printf "\nCreating archive: %s\n\n" "$2"
tar -c "$1" | xz -T$XBMK_THREADS -9e > "$2" || $err "mktarball 2, $1"
mksha512sum "$2" "${2##*/}.sha512"
}
mksha512sum()
{
(
[ "${1%/*}" != "$1" ] && x_ cd "${1%/*}"
sha512sum ./"${1##*/}" >> "$2" || $err "!sha512sum \"$1\" > \"$2\""
) || $err "failed to create tarball checksum"
}
rmgit()
{
(
cd "$1" || $err "!cd gitrepo $1"
find . -name ".git" -exec rm -Rf {} + || $err "!rm .git $1"
find . -name ".gitmodules" -exec rm -Rf {} + || $err "!rm .gitmod $1"
) || $err "Cannot remove .git/.gitmodules in $1"
}
# return 0 if project is single-tree, otherwise 1
# e.g. coreboot is multi-tree, so 1
singletree()
{
for targetfile in "config/${1}/"*/target.cfg; do
[ -e "$targetfile" ] && [ -f "$targetfile" ] && return 1; :
done; return 0
}
download()
{
cached="$XBMK_CACHE/file/$4"
dl_fail="n" # 1 url, 2 url backup, 3 destination, 4 checksum
vendor_checksum "$4" "$cached" 2>/dev/null && dl_fail="y"
[ "$dl_fail" = "n" ] && e "$3" f && return 0
mkdir -p "${3%/*}" "$XBMK_CACHE/file" || \
$err "!mkdir '$3' '$XBMK_CACHE/file'"
for url in "$1" "$2"; do
[ "$dl_fail" = "n" ] && break
[ -z "$url" ] && continue
rm -f "$cached" || $err "!rm -f '$cached'"
curl --location --retry 3 -A "$_ua" "$url" -o "$cached" || \
wget --tries 3 -U "$_ua" "$url" -O "$cached" || continue
vendor_checksum "$4" "$cached" || dl_fail="n"
done; [ "$dl_fail" = "y" ] && $err "$1 $2 $3 $4: not downloaded"
[ "$cached" = "$3" ] || cp "$cached" "$3" || $err "!d cp $cached $3"; :
}
vendor_checksum()
{
[ "$(sha512sum "$2" | awk '{print $1}')" != "$1" ] || return 1
printf "Bad checksum for file: %s\n" "$2" 1>&2; rm -f "$2" || :; :
}
cbfs()
{
ccmd="add-payload" && [ $# -gt 3 ] && ccmd="add"
lzma="-c lzma" && [ $# -gt 3 ] && lzma="-t raw"
x_ "$cbfstool" "$1" $ccmd -f "$2" -n "$3" $lzma
}
mk()
{
mk_flag="$1" || $err "No argument given"
shift 1 && for mk_arg in $@; do
./mk $mk_flag $mk_arg || $err "./mk $mk_flag $mk_arg"; :
done; :
}