canoeboot
/
cbmk
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cbmk/include/rom.sh

200 lines
6.3 KiB
Bash
Raw Normal View History

rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
mkserprog()
{
trees: support -d (dry run) for custom build logic -d does the same as -b, except for actually building anything! in effect, it does the same as -f (fetch) except that the resulting variable assignments will not be recursive (as with -f). if -d is passed, configuration is still loaded, defconfig files are still cycled through, and more importantly: helper functions are still processed. the grub, serprog and coreboot helper functions have been modified to return early (zero status) if -d is passed. example usage: ./update trees -d coreboot x230_12mb this would download the files, NOT build coreboot, and NOT build the payloads. there is one additional benefit to doing it this way: the utils command has been removed, e.g. ./update trees -b coreboot utils default the equivalent is now: ./update trees -d coreboot default the overall effect of this change is that the trees script no longer contains any project-specific logic, except for the crossgcc build logic. it does include some config/data mkhelper files at the top, for serprog and coreboot, so that those variables defined in those files can be global, but another solution to mitigate that will also be implemented in a future commit. the purpose of this and other revisions (in the final push to complete lbmk audit 6 / cbmk audit 2) is to generalise as much logic as possible, removing various ugly hacks. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 00:31:25 +00:00
[ "$_f" = "-d" ] && return 0 # dry run
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
basename -as .h "$serdir/"*.h > "$TMPDIR/ser" || $err "!mk $1 $TMPDIR"
while read -r sertarget; do
[ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$sertarget" \
-DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" \
&& x_ cmake --build "$sersrc/build"
[ "$1" = "stm32" ] && x_ make -C "$sersrc" \
libopencm3-just-make BOARD=$sertarget && x_ make -C \
"$sersrc" BOARD=$sertarget; x_ mkdir -p "bin/serprog_$1"
x_ mv "$serx" "bin/serprog_$1/serprog_$sertarget.${serx##*.}"
done < "$TMPDIR/ser"
[ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/serprog_$1"; return 0
}
Add Sony PlayStation support to Canoeboot I also added a "cleanargs" argument, similar to the makeargs argument, to work around a build error. This builds the PCSX-Redux PS1 BIOS. They reverse engineered the Sony PS1 BIOS and wrote a free one under MIT license. Run this: ./mk -b pcsx-redux The file will appear: bin/playstation/openbios.bin Yes. PlayStation support. It's even RYF-friendly: * Replace BIOS chip with PCSX-Redux's open BIOS * Install PsNee modchip (libre modchip firmware) * Install PicoStation (libre optical disc drive emulator) * Libre SDKs are available e.g. PSn00bSDK I added this to Libreboot, because I'm working on a fork of DuckStation. DuckStation recently went proprietary, so I'm making a fork (soon to be launched) that is based on the libre version, and I was told of PCSX-Redux's Open BIOS, so I decided to add it to the *boot projects. Signed-off-by: Leah Rowe <leah@libreboot.org> Signed-off-by: Leah Rowe <info@minifree.org>
2024-09-25 22:59:52 +00:00
copyps1bios()
{
x_ rm -Rf bin/playstation
x_ mkdir -p bin/playstation
x_ cp src/pcsx-redux/src/mips/openbios/openbios.bin bin/playstation
rom.sh: support making pcsx-redux bios release I also checked the copyright declarations in the directory src/mips/openbios where the PCSX-Redux BIOS is, gleaning all the copyright years: 2019-2024 at this time. The years will be updated as and when PCSX-Redux is updated in lbmk. Their BIOS is under MIT so I made lbmk generate an appropriate COPYING file alongside the binary, containing: Copyright (c) 2019-2024 PCSX-Redux authors Along with the actual text of the MIT license. With all of this, the PCSX-Redux BIOS can now be included in Libreboot releases. No actual tarball is created. The release script in lbmk simply copies the bin/ directory to ../roms I'm leaving the PCSX-Redux BIOS release uncompressed, because, and this will sound patronising because that is my precise intention: Windows users don't know how to do anything. If I provide a tarball to Windows users, they won't know what to do. Libreboot releases always go on rsync mirrors, which also have HTTP servers with indexing enabled, for browsing release files. I mention Windows users, because most people who use the PCSX Redux BIOS will probably use it on a PlayStation emulator, and most emulator users are on Windows. I can't really be bothered to provide it as a .zip archive, and it's only 512kb, so just provide it uncompressed in Libreboot releases! Releases were already possible under this scheme, so this patch really just adds the COPYING file. It's simply a courtesy to the PCSX-Redux developers, providing proper credit to them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-08 12:18:20 +00:00
printf "MIT License\n\nCopyright (c) 2019-2024 PCSX-Redux authors\n\n" \
> bin/playstation/COPYING.txt || $err "!pcsx-redux copyright"
cat config/snippet/mit >>bin/playstation/COPYING.txt || $err "!pcsx MIT"
Add Sony PlayStation support to Canoeboot I also added a "cleanargs" argument, similar to the makeargs argument, to work around a build error. This builds the PCSX-Redux PS1 BIOS. They reverse engineered the Sony PS1 BIOS and wrote a free one under MIT license. Run this: ./mk -b pcsx-redux The file will appear: bin/playstation/openbios.bin Yes. PlayStation support. It's even RYF-friendly: * Replace BIOS chip with PCSX-Redux's open BIOS * Install PsNee modchip (libre modchip firmware) * Install PicoStation (libre optical disc drive emulator) * Libre SDKs are available e.g. PSn00bSDK I added this to Libreboot, because I'm working on a fork of DuckStation. DuckStation recently went proprietary, so I'm making a fork (soon to be launched) that is based on the libre version, and I was told of PCSX-Redux's Open BIOS, so I decided to add it to the *boot projects. Signed-off-by: Leah Rowe <leah@libreboot.org> Signed-off-by: Leah Rowe <info@minifree.org>
2024-09-25 22:59:52 +00:00
}
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
mkpayload_grub()
{
eval `setvars "" grub_modules grub_install_modules`
trees: use wrapper for dry-running make commands instead of using lots of if/else conditions, do that once and set a variable, dry, to : if not doing a dry run, the variable is empty. prefix this variable in places where you don't want a certain action to be performed, on dry runs. more specifically, : does *nothing* and always returns with zero status (success). this results in cleaner code, and a small sloccount reduction. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 19:38:36 +00:00
$dry eval `setcfg "$grubdata/module/$tree"`
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
$dry x_ rm -f "$srcdir/grub.elf"; $dry \
"$srcdir/grub-mkstandalone" --grub-mkimage="$srcdir/grub-mkimage" \
trees: general code cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 21:14:39 +00:00
-O i386-coreboot -o "$srcdir/grub.elf" -d "${srcdir}/grub-core/" \
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
--fonts= --themes= --locales= --modules="$grub_modules" \
--install-modules="$grub_install_modules" \
trees: general code cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 21:14:39 +00:00
"/boot/grub/grub_default.cfg=${srcdir}/.config" \
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
"/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
"/background.png=$grubdata/background/background1280x800.png" || \
$err "$tree: cannot build grub.elf"; return 0
}
minor cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 02:09:49 +00:00
mkvendorfiles()
{
include/rom.sh: use ccache when building coreboot ccache now required, in build dependencies Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-21 06:39:47 +00:00
[ -z "$mode" ] && $dry cook_coreboot_config
trees: use wrapper for dry-running make commands instead of using lots of if/else conditions, do that once and set a variable, dry, to : if not doing a dry run, the variable is empty. prefix this variable in places where you don't want a certain action to be performed, on dry runs. more specifically, : does *nothing* and always returns with zero status (success). this results in cleaner code, and a small sloccount reduction. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 19:38:36 +00:00
check_coreboot_utils "$tree"
trees: general code cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 21:14:39 +00:00
printf "%s\n" "${version%%-*}" > "$srcdir/.coreboot-version" || \
$err "!mk $srcdir .coreboot-version"
minor cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 02:09:49 +00:00
}
include/rom.sh: use ccache when building coreboot ccache now required, in build dependencies Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-21 06:39:47 +00:00
cook_coreboot_config()
{
[ -f "$srcdir/.config" ] || return 0
printf "CONFIG_CCACHE=y\n" >> "$srcdir/.config" || \
$err "$srcdir/.config: Could not enable ccache"
make -C "$srcdir" oldconfig || $err "Could not cook $srcdir/.config"; :
}
trees: support -d (dry run) for custom build logic -d does the same as -b, except for actually building anything! in effect, it does the same as -f (fetch) except that the resulting variable assignments will not be recursive (as with -f). if -d is passed, configuration is still loaded, defconfig files are still cycled through, and more importantly: helper functions are still processed. the grub, serprog and coreboot helper functions have been modified to return early (zero status) if -d is passed. example usage: ./update trees -d coreboot x230_12mb this would download the files, NOT build coreboot, and NOT build the payloads. there is one additional benefit to doing it this way: the utils command has been removed, e.g. ./update trees -b coreboot utils default the equivalent is now: ./update trees -d coreboot default the overall effect of this change is that the trees script no longer contains any project-specific logic, except for the crossgcc build logic. it does include some config/data mkhelper files at the top, for serprog and coreboot, so that those variables defined in those files can be global, but another solution to mitigate that will also be implemented in a future commit. the purpose of this and other revisions (in the final push to complete lbmk audit 6 / cbmk audit 2) is to generalise as much logic as possible, removing various ugly hacks. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 00:31:25 +00:00
check_coreboot_utils()
{
for util in cbfstool ifdtool; do
rom.sh: fix buggy deletion of cbutils when badhash=y, the utils should be deleted, but the check is deleting if badhash isn't n. if the hash check isn't being performed, then this will always be the case and the utils are always deleted. make it positively delete the file only if badhash=y, not when it isn't n. while this may not sound very different, it will prevent the utils being deleted and re-build endlessly in other cases, like when building release archives and running the inject --nuke mode on every image that gets built. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 18:34:19 +00:00
[ "$badhash" = "y" ] && x_ rm -f "elf/$util/$1/$util"
rom.sh: actually say if a cbutil exists Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 01:04:25 +00:00
e "elf/$util/$1/$util" f && continue
rom.sh: avoid re-building cbutils if built Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 00:37:27 +00:00
trees: support -d (dry run) for custom build logic -d does the same as -b, except for actually building anything! in effect, it does the same as -f (fetch) except that the resulting variable assignments will not be recursive (as with -f). if -d is passed, configuration is still loaded, defconfig files are still cycled through, and more importantly: helper functions are still processed. the grub, serprog and coreboot helper functions have been modified to return early (zero status) if -d is passed. example usage: ./update trees -d coreboot x230_12mb this would download the files, NOT build coreboot, and NOT build the payloads. there is one additional benefit to doing it this way: the utils command has been removed, e.g. ./update trees -b coreboot utils default the equivalent is now: ./update trees -d coreboot default the overall effect of this change is that the trees script no longer contains any project-specific logic, except for the crossgcc build logic. it does include some config/data mkhelper files at the top, for serprog and coreboot, so that those variables defined in those files can be global, but another solution to mitigate that will also be implemented in a future commit. the purpose of this and other revisions (in the final push to complete lbmk audit 6 / cbmk audit 2) is to generalise as much logic as possible, removing various ugly hacks. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 00:31:25 +00:00
utilelfdir="elf/$util/$1"
utilsrcdir="src/coreboot/$1/util/$util"
utilmode="" && [ -n "$mode" ] && utilmode="clean"
x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $makeargs
[ -z "$mode" ] && [ ! -f "$utilelfdir/$util" ] && \
x_ mkdir -p "$utilelfdir" && \
x_ cp "$utilsrcdir/$util" "elf/$util/$1"
[ -z "$mode" ] || x_ rm -Rf "$utilelfdir"; continue
done; return 0
}
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
mkcorebootbin()
{
[ "$target" = "$tree" ] && return 0
rom.sh: copy tmprom to TMPDIR for modification don't rely on build/coreboot.rom staying in place, because sometimes it can get purged under certain conditions, due to idiosyncrasies in the coreboot build system, even when we don't explicitly clean it Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 17:40:42 +00:00
tmprom="$TMPDIR/coreboot.rom"
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
$dry x_ cp "$srcdir/build/coreboot.rom" "$tmprom"
rom.sh: copy tmprom to TMPDIR for modification don't rely on build/coreboot.rom staying in place, because sometimes it can get purged under certain conditions, due to idiosyncrasies in the coreboot build system, even when we don't explicitly clean it Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 17:40:42 +00:00
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
initmode="${defconfig##*/}"; displaymode="${initmode##*_}"
initmode="${initmode%%_*}"
[ -n "$displaymode" ] && displaymode="_$displaymode"
cbfstool="elf/cbfstool/$tree/cbfstool"
[ -n "$uboot_config" ] || uboot_config="default"
[ "$payload_uboot" = "y" ] || payload_seabios="y"
[ "$payload_grub" = "y" ] && payload_seabios="y"
[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
trees: use wrapper for dry-running make commands instead of using lots of if/else conditions, do that once and set a variable, dry, to : if not doing a dry run, the variable is empty. prefix this variable in places where you don't want a certain action to be performed, on dry runs. more specifically, : does *nothing* and always returns with zero status (success). this results in cleaner code, and a small sloccount reduction. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 19:38:36 +00:00
$dry $err "$target: U-Boot and SeaBIOS/GRUB are both enabled."
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
[ -n "$grubtree" ] || grubtree="default"
grubelf="elf/grub/$grubtree/payload/grub.elf"
[ "$payload_memtest" = "y" ] || payload_memtest="n"
[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
Experimental U-Boot payload (32-bit dtb, U-Boot) NOTE: Support added for xarch target x86_64-elf, but U-Boot failed to build with this error: OBJCOPY lib/efi_loader/helloworld.efi x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1 Since I'm building U-Boot for x86_64 *on* an x86-64 host, and since that is currently the recommended type of machine to use for cbmk development, and since the other x86 payloads currently don't cross compile anyway, this is an acceptable compromise for now. This is because at present, I'm not making U-Boot the primary payload on x86, instead preferring to chain it from GRUB and SeaBIOS. The target.cfg file for x86 u-boot shows xarch/xtree commented. Uncomment these to compile on crossgcc instead of hostcc. I mention 64-bit because I initially did this first, but decided to do 32-bit first. I'll work on the 64-bit one next (SPL). It's only enabled in QEMU for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-03 02:41:41 +00:00
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
if $dry grep "CONFIG_PAYLOAD_NONE=y" "$defconfig"; then
allow using coreboot's build system to add payload lbmk must still define payloads, but specific configs may use coreboot's build system instead. you might use this to add your own config with, say, tianocore payload, using coreboot.git to build it, rather than using lbmk's choice of payloads. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 18:06:53 +00:00
[ "$payload_seabios" = "y" ] && pname="seabios" && \
$dry add_seabios
[ "$payload_uboot" = "y" ] && pname="uboot" && $dry add_uboot
else
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
pname="custom" && $dry cprom; :
rom.sh: re-add seabios-only roms and grub keymaps this time, only handle multiple keymaps on seagrub images. for images where seabios is first but does not immediately load grub, whether grub is still available in flash, just do one image (US Qwerty) this still results in fewer images per target than Libreboot 20240612, but should prevent most users from being annoyed. i got a few people asking repeatedly, and i hadn't documented yet how to add keymap.gkb or how to remove bootorder, to get a different keymap or disable seagrub respectively. i anticipate that i'll get such questions a lot, even if i do document it, so i'm reversing that decision. it doesn't result in much extra code. the new design in lbmk makes this sort of thing much simpler. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 08:11:53 +00:00
fi; :
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
}
add_seabios()
{
_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
re-affirm SeaGRUB as the primary payload GRUB-as-primary was temporarily allowed in lbmk, because of a temporary SeaBIOS bug on a machine that canoeboot doesn't actually support yet, namely the 3050 Micro. This same diff was also applied to lbmk, but lbmk also applied changes to a coreboot config for the aforementioned mainboard. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-27 19:29:26 +00:00
cbfs "$tmprom" "$_seabioself" "fallback/payload"
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
_z="2"; [ "$initmode" = "vgarom" ] && _z="0"
x_ "$cbfstool" "$tmprom" add-int -i $_z -n etc/pci-optionrom-exec
x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
[ "$initmode" = "libgfxinit" ] && \
cbfs "$tmprom" "$seavgabiosrom" vgaroms/seavgabios.bin raw
[ "$payload_memtest" = "y" ] && cbfs "$tmprom" \
"elf/memtest86plus/memtest.bin" img/memtest
Experimental U-Boot payload (32-bit dtb, U-Boot) NOTE: Support added for xarch target x86_64-elf, but U-Boot failed to build with this error: OBJCOPY lib/efi_loader/helloworld.efi x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1 Since I'm building U-Boot for x86_64 *on* an x86-64 host, and since that is currently the recommended type of machine to use for cbmk development, and since the other x86 payloads currently don't cross compile anyway, this is an acceptable compromise for now. This is because at present, I'm not making U-Boot the primary payload on x86, instead preferring to chain it from GRUB and SeaBIOS. The target.cfg file for x86 u-boot shows xarch/xtree commented. Uncomment these to compile on crossgcc instead of hostcc. I mention 64-bit because I initially did this first, but decided to do 32-bit first. I'll work on the 64-bit one next (SPL). It's only enabled in QEMU for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-03 02:41:41 +00:00
[ "$payload_uboot_i386" = "y" ] && $dry add_uboot
rom.sh: also add grub to seabios images we want multiple seagrub images made, with different keymaps, but we only want one non-seagrub image. however, we also want grub in the non-seagrub image. it just means that seabios is primarily what the user wants, and they might occasionally use grub, whereas the seagrub images are for people who primarily want grub but may occasionally access the seabios menu. right now, the seabios images really only contain seabios, but there's no harm in adding grub to them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 17:47:38 +00:00
[ "$payload_grub" = "y" ] && add_grub
re-affirm SeaGRUB as the primary payload GRUB-as-primary was temporarily allowed in lbmk, because of a temporary SeaBIOS bug on a machine that canoeboot doesn't actually support yet, namely the 3050 Micro. This same diff was also applied to lbmk, but lbmk also applied changes to a coreboot config for the aforementioned mainboard. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-27 19:29:26 +00:00
cprom && [ "$payload_grub" = "y" ] && pname="seagrub" && mkseagrub; :
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
}
add_grub()
{
re-affirm SeaGRUB as the primary payload GRUB-as-primary was temporarily allowed in lbmk, because of a temporary SeaBIOS bug on a machine that canoeboot doesn't actually support yet, namely the 3050 Micro. This same diff was also applied to lbmk, but lbmk also applied changes to a coreboot config for the aforementioned mainboard. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-27 19:29:26 +00:00
cbfs "$tmprom" "$grubelf" "img/grub2"
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
> "$TMPDIR/tmpcfg" || $err "$target: !insert scandisk"
cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
rom.sh: also add grub to seabios images we want multiple seagrub images made, with different keymaps, but we only want one non-seagrub image. however, we also want grub in the non-seagrub image. it just means that seabios is primarily what the user wants, and they might occasionally use grub, whereas the seagrub images are for people who primarily want grub but may occasionally access the seabios menu. right now, the seabios images really only contain seabios, but there's no harm in adding grub to them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 17:47:38 +00:00
}
mkseagrub()
{
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
cbfs "$tmprom" "$grubdata/bootorder" bootorder raw
rom.sh: re-add seabios-only roms and grub keymaps this time, only handle multiple keymaps on seagrub images. for images where seabios is first but does not immediately load grub, whether grub is still available in flash, just do one image (US Qwerty) this still results in fewer images per target than Libreboot 20240612, but should prevent most users from being annoyed. i got a few people asking repeatedly, and i hadn't documented yet how to add keymap.gkb or how to remove bootorder, to get a different keymap or disable seagrub respectively. i anticipate that i'll get such questions a lot, even if i do document it, so i'm reversing that decision. it doesn't result in much extra code. the new design in lbmk makes this sort of thing much simpler. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 08:11:53 +00:00
for keymap in config/data/grub/keymap/*.gkb; do
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
[ -f "$keymap" ] && cprom "${keymap##*/}"; :
done; :
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
}
add_uboot()
{
Experimental U-Boot payload (32-bit dtb, U-Boot) NOTE: Support added for xarch target x86_64-elf, but U-Boot failed to build with this error: OBJCOPY lib/efi_loader/helloworld.efi x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1 Since I'm building U-Boot for x86_64 *on* an x86-64 host, and since that is currently the recommended type of machine to use for cbmk development, and since the other x86 payloads currently don't cross compile anyway, this is an acceptable compromise for now. This is because at present, I'm not making U-Boot the primary payload on x86, instead preferring to chain it from GRUB and SeaBIOS. The target.cfg file for x86 u-boot shows xarch/xtree commented. Uncomment these to compile on crossgcc instead of hostcc. I mention 64-bit because I initially did this first, but decided to do 32-bit first. I'll work on the 64-bit one next (SPL). It's only enabled in QEMU for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-03 02:41:41 +00:00
# TODO: re-work to allow each coreboot target to say which ub tree
# instead of hardcoding as in the current logic below:
ubcbfsargs=""
[ "$payload_uboot_i386" = "y" ] && \
ubcbfsargs="-l 0x1110000 -e 0x1110000"
ubpath="fallback/payload"
[ "$payload_uboot_i386" = "y" ] && ubpath="u-boot"
ubtarget="$target"
[ "$payload_uboot_i386" = "y" ] && ubtarget="i386coreboot"
ubdir="elf/u-boot/$ubtarget/$uboot_config"
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
ubootelf="$ubdir/u-boot"
Experimental U-Boot payload (32-bit dtb, U-Boot) NOTE: Support added for xarch target x86_64-elf, but U-Boot failed to build with this error: OBJCOPY lib/efi_loader/helloworld.efi x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1 Since I'm building U-Boot for x86_64 *on* an x86-64 host, and since that is currently the recommended type of machine to use for cbmk development, and since the other x86 payloads currently don't cross compile anyway, this is an acceptable compromise for now. This is because at present, I'm not making U-Boot the primary payload on x86, instead preferring to chain it from GRUB and SeaBIOS. The target.cfg file for x86 u-boot shows xarch/xtree commented. Uncomment these to compile on crossgcc instead of hostcc. I mention 64-bit because I initially did this first, but decided to do 32-bit first. I'll work on the 64-bit one next (SPL). It's only enabled in QEMU for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-03 02:41:41 +00:00
[ "$payload_uboot_i386" = "y" ] && ubootelf="$ubdir/u-boot-dtb.bin"
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
Experimental U-Boot payload (32-bit dtb, U-Boot) NOTE: Support added for xarch target x86_64-elf, but U-Boot failed to build with this error: OBJCOPY lib/efi_loader/helloworld.efi x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1 Since I'm building U-Boot for x86_64 *on* an x86-64 host, and since that is currently the recommended type of machine to use for cbmk development, and since the other x86 payloads currently don't cross compile anyway, this is an acceptable compromise for now. This is because at present, I'm not making U-Boot the primary payload on x86, instead preferring to chain it from GRUB and SeaBIOS. The target.cfg file for x86 u-boot shows xarch/xtree commented. Uncomment these to compile on crossgcc instead of hostcc. I mention 64-bit because I initially did this first, but decided to do 32-bit first. I'll work on the 64-bit one next (SPL). It's only enabled in QEMU for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-03 02:41:41 +00:00
[ -f "$ubootelf" ] || $err "cb/$ubtarget: Can't find u-boot"
cbfs "$tmprom" "$ubootelf" "$ubpath" $ubcbfsargs; cprom
rom.sh: re-add seabios-only roms and grub keymaps this time, only handle multiple keymaps on seagrub images. for images where seabios is first but does not immediately load grub, whether grub is still available in flash, just do one image (US Qwerty) this still results in fewer images per target than Libreboot 20240612, but should prevent most users from being annoyed. i got a few people asking repeatedly, and i hadn't documented yet how to add keymap.gkb or how to remove bootorder, to get a different keymap or disable seagrub respectively. i anticipate that i'll get such questions a lot, even if i do document it, so i'm reversing that decision. it doesn't result in much extra code. the new design in lbmk makes this sort of thing much simpler. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 08:11:53 +00:00
}
cprom()
{
newrom="bin/$target/${pname}_${target}_$initmode$displaymode.rom"
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
[ $# -gt 0 ] && newrom="${newrom%.rom}_${1%.gkb}.rom"
rom.sh: re-add seabios-only roms and grub keymaps this time, only handle multiple keymaps on seagrub images. for images where seabios is first but does not immediately load grub, whether grub is still available in flash, just do one image (US Qwerty) this still results in fewer images per target than Libreboot 20240612, but should prevent most users from being annoyed. i got a few people asking repeatedly, and i hadn't documented yet how to add keymap.gkb or how to remove bootorder, to get a different keymap or disable seagrub respectively. i anticipate that i'll get such questions a lot, even if i do document it, so i'm reversing that decision. it doesn't result in much extra code. the new design in lbmk makes this sort of thing much simpler. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-22 08:11:53 +00:00
x_ mkdir -p "bin/$target"
x_ cp "$tmprom" "$newrom" && [ $# -gt 0 ] && \
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
cbfs "$newrom" "config/data/grub/keymap/$1" keymap.gkb raw; :
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
}
mkcoreboottar()
{
rom.sh: only make rom tarball if release=y Signed-off-by: Leah Rowe <info@minifree.org>
2024-07-08 01:21:52 +00:00
[ "$target" = "$tree" ] && return 0; [ "$XBMK_RELEASE" = "y" ] && \
general code cleanup in the build system Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-26 14:24:00 +00:00
[ "$release" != "n" ] && $dry mkrom_tarball "bin/$target"; :
rom.sh: new file, to replace script/roms stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 22:36:13 +00:00
}