cbmk/script/roms

449 lines
14 KiB
Plaintext
Raw Normal View History

#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
set -u -e
. "include/lib.sh"
seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
grub_background="background1280x800.png"
grubelf="elf/grub/grub.elf"
cfgsdir="config/coreboot"
picosrc="src/pico-serprog"
picosdk="src/pico-sdk"
stm32src="src/stm32-vserprog"
# Disable all payloads by default.
# target.cfg files have to specifically enable [a] payload(s)
pv="payload_uboot payload_grub_withseabios payload_seabios payload_memtest t"
pv="$pv payload_seabios_withgrub payload_seabios_grubonly payload_grub mt86bin"
v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release"
v="$v grub_timeout ubdir board grub_scan_disk uboot_config"
eval "$(setvars "n" $pv serprog)"
eval "$(setvars "" $v boards _displaymode _payload _keyboard all targets \
serprog_boards_dir)"
main()
{
while [ $# -gt 0 ]; do
case "$1" in
list) x_ items config/coreboot; return 0 ;;
serprog) serprog="y"; shift 1; break ;;
-d) _displaymode="$2" ;;
-p) _payload="$2" ;;
-k) _keyboard="$2" ;;
*)
[ "$1" = "all" ] && all="y"
boards="$1 $boards"
shift && continue ;;
esac
shift 2
done
if [ "$serprog" = "y" ]; then
handle_serprog $@; return 0
else
[ "$all" != "y" ] || boards="$(items config/coreboot)" || \
$err "Cannot generate list of boards for building"
for x in $boards; do
[ -d "config/coreboot/$x/config" ] && \
handle_coreboot_target "$x"; continue
done
fi
x="directories"
[ "$xbmk_release" = "y" ] && x="archives"
[ -z "$targets" ] && $err "No ROM images were compiled"
printf "\nROM images available in these %s:\n" "$x"
eval "printf \"$targets\""
printf "^^ ROM images available in these %s.\n\n" "$x"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
printf "DO NOT flash images from elf/ - please use bin/ instead.\n"
}
handle_serprog()
{
[ -z "${1+x}" ] && $err "bad command. Check $projectname docs."
[ "$1" != "rp2040" ] && [ "$1" != "stm32" ] && $err "bad command"
if [ "$1" = "rp2040" ]; then
serprog_boards_dir="$picosdk/src/boards/include/boards"
[ -d "$picosrc" ] || x_ ./update trees -f "pico-serprog"
elif [ "$1" = "stm32" ]; then
serprog_boards_dir="$stm32src/boards"
[ -d "$stm32src" ] || x_ ./update trees -f "stm32-vserprog"
fi
x_ mkdir -p "bin/serprog_$1"
if [ $# -gt 1 ] && [ "$2" = "list" ]; then
list_serprog_boards "$serprog_boards_dir"
return 0
elif [ $# -gt 1 ]; then
build_${1}_rom "$2"
else
list_serprog_boards "$serprog_boards_dir" | \
while read -r board; do
build_${1}_rom "$board"
done
fi
[ "$xbmk_release" = "y" ] && mkrom_tarball "bin/serprog_$1"; return 0
}
build_rp2040_rom()
{
board="$1"
printf "Building pico-serprog for %s\n" "$board"
x_ cmake -DPICO_BOARD="$board" -DPICO_SDK_PATH="$picosdk" \
-B "$picosrc/build" "$picosrc"
x_ cmake --build "$picosrc/build"
x_ mv "$picosrc/build/pico_serprog.uf2" \
"bin/serprog_rp2040/serprog_$board.uf2"
printf "output to bin/serprog_rp2040/serprog_%s.uf2\n" "$board"
}
build_stm32_rom()
{
board="$1"
printf "Building stm32-vserprog for %s\n" "$board"
x_ make -C "$stm32src" libopencm3-just-make BOARD=$board
x_ make -C "$stm32src" BOARD=$board
x_ mv "$stm32src/stm32-vserprog.hex" \
"bin/serprog_stm32/serprog_$board.hex"
printf "output to bin/serprog_stm32/serprog_%s.hex\n" "$board"
}
list_serprog_boards()
{
basename -a -s .h "$1/"*.h || $err "$1: can't list boards"
}
handle_coreboot_target()
{
eval "$(setvars "n" $pv) $(setvars "" $v)"
grub_background="background1280x800.png"
board="$1"
configure_target
[ "$board" = "$tree" ] && return 0
[ "$xbmk_release" = "y" ] && [ "$release" = "n" ] && return 0
build_payloads
build_target_mainboard
[ -d "bin/$board" ] || return 0
[ "$xbmk_release" = "y" ] || targets="* bin/$board\n$targets"
[ "$xbmk_release" = "y" ] && mkrom_tarball "bin/$board" && \
targets="* bin/${relname}_$board.tar.xz\n$targets"; return 0
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
configure_target()
{
targetdir="$cfgsdir/$board"
[ -f "$targetdir/target.cfg" ] || $err "$board: target.cfg missing"
# Override the above defaults using target.cfg
. "$targetdir/target.cfg"
[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
_ata=""
_ahci=""
_nvme=""
_grub_scan_disk=""
for _disk in $grub_scan_disk; do
[ "$_disk" != "nvme" ] && [ "$_disk" != "ahci" ] && \
[ "$_disk" != "ata" ] && _grub_scan_disk="nvme ahci ata" \
&& break
[ -n "$_ata" ] && [ "$_disk" = "ata" ] && continue
[ -n "$_ahci" ] && [ "$_disk" = "ahci" ] && continue
[ -n "$_nvme" ] && [ "$_disk" = "nvme" ] && continue
eval "_$_disk=\"$_disk\""
_grub_scan_disk="$_grub_scan_disk $_disk"
done
[ -z "$_grub_scan_disk" ] && _grub_scan_disk="nvme ahci ata"
grub_scan_disk="${_grub_scan_disk# }"
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
[ -z "$tree" ] && $err "$board: tree not defined"
[ "$payload_memtest" != "y" ] && payload_memtest="n"
[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
[ "$payload_grub_withseabios" = "y" ] && payload_grub="y"
[ "$payload_grub_withseabios" = "y" ] && \
eval "$(setvars "y" payload_seabios payload_seabios_withgrub)"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ "$payload_seabios_withgrub" = "y" ] && payload_seabios="y"
[ "$payload_seabios_grubonly" = "y" ] && payload_seabios="y"
[ "$payload_seabios_grubonly" = "y" ] && payload_seabios_withgrub="y"
# The reverse logic must not be applied. If SeaBIOS-with-GRUB works,
# that doesn't mean GRUB-with-SeaBIOS will, e.g. VGA ROM execution
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ "$payload_grub" != "y" ] && [ "$payload_seabios" != "y" ] && \
[ "$payload_uboot" != "y" ] && $err "'$board' defines no payload"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ "$payload_uboot" != "n" ] && [ "$payload_uboot" != "y" ] && \
payload_uboot="n"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ "$payload_uboot" = "y" ] && [ -z "$uboot_config" ] && \
uboot_config="default"
# Override all payload directives with cmdline args
[ -z "$_payload" ] && return 0
eval "$(setvars "n" payload_grub payload_memtest payload_seabios \
payload_seabios_withgrub payload_uboot payload_grub_withseabios \
payload_seabios_grubonly)"
eval "payload_$_payload=y"
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
build_payloads()
{
romdir="bin/$board"
cbdir="src/coreboot/$board"
[ "$board" = "$tree" ] || cbdir="src/coreboot/$tree"
cbfstool="cbutils/$tree/cbfstool"
cbrom="$cbdir/build/coreboot.rom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree
mt86bin="memtest86plus/build64/memtest.bin"
[ "$payload_memtest" != "y" ] || [ -f "src/$mt86bin" ] || \
x_ ./update trees -b memtest86plus
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ "$payload_seabios" = "y" ] && x_ ./update trees -b seabios
if [ "$payload_grub" = "y" ] || [ "$payload_seabios_withgrub" = "y" ] \
|| [ "$payload_seabios_grubonly" = "y" ]; then build_grub_payload
fi
[ "$payload_uboot" = "y" ] && build_uboot_payload; return 0
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
build_grub_payload()
{
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
x_ mkdir -p elf/grub
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
for keymapfile in config/grub/keymap/*.gkb; do
[ -f "$keymapfile" ] && keymaps="$keymaps $keymapfile"
done
GRUB: insert only 1 keymap per board, in cbfs There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17 23:54:53 +00:00
[ -z "$_keyboard" ] || [ -f "$grubcfgsdir/keymap/$_keyboard.gkb" ] || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
$err "build_grub_payload: $_keyboard layout not defined"
[ -n "$_keyboard" ] && keymaps="$grubcfgsdir/keymap/$_keyboard.gkb"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ -f "$grubelf" ] && return 0
[ -f "src/grub/grub-mkstandalone" ] || x_ ./update trees -b grub
./src/grub/grub-mkstandalone --grub-mkimage="src/grub/grub-mkimage" \
-O i386-coreboot -o "elf/grub/grub.elf" -d "src/grub/grub-core/" \
--fonts= --themes= --locales= --modules="$grub_modules" \
--install-modules="$grub_install_modules" \
"/boot/grub/grub.cfg=$grubcfgsdir/config/grub_memdisk.cfg" \
"/boot/grub/grub_default.cfg=$grubcfgsdir/config/grub.cfg" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
$err "could not generate grub.elf"
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
build_uboot_payload()
{
x_ ./update trees -b u-boot $board
ubdir="elf/u-boot/$board/$uboot_config"
ubootelf="$ubdir/u-boot.elf"
[ ! -f "$ubootelf" ] && [ -f "$ubdir/u-boot" ] && \
ubootelf="$ubdir/u-boot"
[ -f "$ubootelf" ] || $err "$board: Can't find u-boot"; return 0
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
build_target_mainboard()
{
x_ rm -Rf "$romdir"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
for x in "normal" "vgarom" "libgfxinit"; do
initmode="$x"
hmode="vesafb"
[ "$initmode" = "vgarom" ] || hmode="corebootfb"
modes="$hmode txtmode"
[ -z "$_displaymode" ] || modes="$_displaymode"
for y in $modes; do
displaymode="$y"
[ "$initmode" = "normal" ] && \
[ "$displaymode" != "txtmode" ] && continue
cbcfg="$targetdir/config/${initmode}_$displaymode"
[ "$initmode" = "normal" ] && cbcfg="${cbcfg%_*}"
build_roms "$cbcfg"; x_ rm -f "$cbrom"
done
done
}
build_roms()
{
cbcfg="$1"
e "$cbcfg" f not && return 0
x_ ./update trees -b coreboot $board
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
_cbrom="elf/coreboot_nopayload_DO_NOT_FLASH"
_cbrom="$_cbrom/$board/${initmode}_$displaymode"
[ "$initmode" = "normal" ] && _cbrom="${_cbrom%"_$displaymode"}"
_cbrom="$_cbrom/coreboot.rom"
cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "$_cbrom" "$cbrom"
[ "$payload_memtest" != "y" ] || x_ "$cbfstool" "$cbrom" add-payload \
-f "src/$mt86bin" -n img/memtest -c lzma
[ "$payload_seabios" = "y" ] && build_seabios_roms
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
[ "$payload_grub" != "y" ] || x_ build_grub_roms "$cbrom" "grub"
[ "$payload_uboot" = "y" ] || return 0
x_ cp "$_cbrom" "$cbrom"
build_uboot_roms
}
build_seabios_roms()
{
if [ "$payload_seabios_withgrub" = "y" ]; then
t="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "$cbrom" "$t"
x_ build_grub_roms "$t" "seabios_withgrub"
else
t="$(mkSeabiosRom "$cbrom" "fallback/payload")" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
$err "build_seabios_roms: cannot build tmprom"
newrom="$romdir/seabios_${board}_${initmode}_$displaymode"
[ "$initmode" = "normal" ] && newrom="$romdir/seabios" \
&& newrom="${newrom}_${board}_$initmode"
x_ cprom "$t" "$newrom.rom"
fi
x_ rm -f "$t"
}
# Make separate ROM images with GRUB payload, for each supported keymap
build_grub_roms()
{
tmprom="$1"
payload1="$2" # allow values: grub, seabios, seabios_withgrub
grub_cbfs="fallback/payload"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
if [ "$payload1" = "grub" ] && [ "$payload_grub_withseabios" = "y" ]
then
_tmpmvrom="$(mkSeabiosRom "$tmprom" "seabios.elf")" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
$err "build_grub_roms 1 $board: can't build tmprom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
x_ mv "$_tmpmvrom" "$tmprom"
elif [ "$payload1" != "grub" ] && [ "$payload_seabios_withgrub" = "y" ]
then
grub_cbfs="img/grub2"
_tmpmvrom="$(mkSeabiosRom "$tmprom" fallback/payload)" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
$err "build_grub_roms 2 $board: can't build tmprom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
x_ mv "$_tmpmvrom" "$tmprom"
fi
# we only need insert grub.elf once, for each coreboot config:
x_ "$cbfstool" "$tmprom" add-payload -f "$grubelf" \
-n "$grub_cbfs" -c lzma
# we only need insert background.png once, for each coreboot config:
if [ "$displaymode" = "vesafb" ] || \
[ "$displaymode" = "corebootfb" ]; then
backgroundfile="config/grub/background/$grub_background"
"$cbfstool" "$tmprom" add -f "$backgroundfile" -n \
background.png -t raw || $err "!bg, $backgroundfile"
fi
tmpcfg="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" > "$tmpcfg" || \
$err "set grub_scandisk, $grub_scan_disk, $tmpcfg"
x_ "$cbfstool" "$tmprom" add -f "$tmpcfg" -n scan.cfg -t raw
printf "set timeout=%s\n" "$grub_timeout" > "$tmpcfg" || \
$err "set timeout, $grub_timeout, $tmpcfg"
[ -z "$grub_timeout" ] || x_ "$cbfstool" "$tmprom" add \
-f "$tmpcfg" -n timeout.cfg -t raw
x_ rm -f "$tmpcfg"
for keymapfile in $keymaps; do
[ -f "$keymapfile" ] || continue
keymap="${keymapfile##*/}"
keymap="${keymap%.gkb}"
GRUB: insert only 1 keymap per board, in cbfs There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17 23:54:53 +00:00
tmpgrubrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "$tmprom" "$tmpgrubrom"
GRUB: insert only 1 keymap per board, in cbfs There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17 23:54:53 +00:00
x_ "$cbfstool" "$tmpgrubrom" add -f "$keymapfile" \
-n keymap.gkb -t raw
newrom="$romdir/${payload1}_${board}_${initmode}_"
newrom="$newrom${displaymode}_$keymap.rom"
[ "$initmode" = "normal" ] && newrom="$romdir/${payload1}_" \
&& newrom="$newrom${board}_${initmode}_$keymap.rom"
x_ cprom "$tmpgrubrom" "$newrom"
if [ "$payload_seabios_withgrub" = "y" ] && \
[ "$payload1" != "grub" ]; then
x_ "$cbfstool" "$tmpgrubrom" add \
-f "config/grub/bootorder" -n bootorder -t raw
x_ cprom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom"
if [ "$payload_seabios_grubonly" = "y" ]; then
x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \
-n etc/show-boot-menu
x_ cprom "$tmpgrubrom" \
"${newrom%.rom}_grubonly.rom"
fi
fi
x_ rm -f "$tmpgrubrom"
done
}
# make a rom in /tmp/ and then print the path of that ROM
mkSeabiosRom() {
_cbrom="$1" # rom to insert seabios in. will not be touched
# (a tmpfile will be made instead)
_seabios_cbfs_path="$2" # e.g. fallback/payload
_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "$_cbrom" "$tmprom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
x_ "$cbfstool" "$tmprom" add-payload -f "$_seabioself" \
-n "$_seabios_cbfs_path" -c lzma
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
z="2"; [ "$initmode" = "vgarom" ] && z="0"
x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
[ "$initmode" != "libgfxinit" ] || x_ "$cbfstool" "$tmprom" add -f \
"$seavgabiosrom" -n vgaroms/seavgabios.bin -t raw
printf "%s\n" "$tmprom"
}
build_uboot_roms()
{
tmprom="$(mkUbootRom "$cbrom" "fallback/payload")" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
$err "build_uboot_roms $board: could not create tmprom"
newrom="$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
x_ cprom "$tmprom" "$newrom"
x_ rm -f "$tmprom"
}
# make a rom in /tmp/ and then print the path of that ROM
mkUbootRom() {
_cbrom="$1"
_uboot_cbfs_path="$2"
_ubdir="elf/u-boot/$board/$uboot_config"
_ubootelf="$_ubdir/u-boot.elf"
[ -f "$_ubootelf" ] || _ubootelf="$_ubdir/u-boot"
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 01:19:39 +00:00
[ -f "$_ubootelf" ] || $err "mkUbootRom: $board: cant find u-boot"
tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "$_cbrom" "$tmprom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
x_ "$cbfstool" "$tmprom" add-payload -f "$_ubootelf" \
-n "$_uboot_cbfs_path" -c lzma
printf "%s\n" "$tmprom"
}
cprom()
{
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 11:37:25 +00:00
printf "Creating target image: %s\n" "$2"
x_ mkdir -p "${2%/*}"
x_ cp "$1" "$2"
}
main $@