NOTE: Support added for xarch target x86_64-elf,
but U-Boot failed to build with this error:
OBJCOPY lib/efi_loader/helloworld.efi
x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target
make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1
Since I'm building U-Boot for x86_64 *on* an x86-64
host, and since that is currently the recommended type
of machine to use for cbmk development, and since the
other x86 payloads currently don't cross compile anyway,
this is an acceptable compromise for now. This is because
at present, I'm not making U-Boot the primary payload on x86,
instead preferring to chain it from GRUB and SeaBIOS.
The target.cfg file for x86 u-boot shows xarch/xtree commented.
Uncomment these to compile on crossgcc instead of hostcc.
I mention 64-bit because I initially did this first, but decided
to do 32-bit first. I'll work on the 64-bit one next (SPL).
It's only enabled in QEMU for now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
GRUB-as-primary was temporarily allowed in lbmk, because of
a temporary SeaBIOS bug on a machine that canoeboot doesn't
actually support yet, namely the 3050 Micro.
This same diff was also applied to lbmk, but lbmk also applied
changes to a coreboot config for the aforementioned mainboard.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Dell OptiPlex 3050 Micro support was added to Libreboot,
which we can't add in Canoeboot, but SeaBIOS hung on that
board so we made GRUB the primary payload on that board.
SeaGRUB is still enforced on all Canoeboot targets at
present, but we want cbmk to maintain parity with lbmk.
Therefore, import this functionality into cbmk, but without
actually using it.
Add two variable options for target.cfg files:
* seabiosname
* grubname
This string defines where it would be located in CBFS.
Signed-off-by: Leah Rowe <leah@libreboot.org>
I also added a "cleanargs" argument, similar to the makeargs
argument, to work around a build error.
This builds the PCSX-Redux PS1 BIOS. They reverse engineered
the Sony PS1 BIOS and wrote a free one under MIT license.
Run this:
./mk -b pcsx-redux
The file will appear: bin/playstation/openbios.bin
Yes. PlayStation support. It's even RYF-friendly:
* Replace BIOS chip with PCSX-Redux's open BIOS
* Install PsNee modchip (libre modchip firmware)
* Install PicoStation (libre optical disc drive emulator)
* Libre SDKs are available e.g. PSn00bSDK
I added this to Libreboot, because I'm working on a fork of
DuckStation. DuckStation recently went proprietary, so I'm making
a fork (soon to be launched) that is based on the libre version,
and I was told of PCSX-Redux's Open BIOS, so I decided to add it
to the *boot projects.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Signed-off-by: Leah Rowe <info@minifree.org>
single-tree projects cannot be handled in bulk, e.g.
./mk -f project1 project2 project3
that is still the case, from the shell, but internally
it is now possible:
mk -f project1 project2 project3
mk() is a function that simply handles the given flag,
and all projects specified.
it does not handle cases without argument, for example
you cannot do:
mk -f
arguments must be provided. it can be used internally,
to simplify cases where multiple single-tree projects
must be handled, but *also* allows multi-tree projects
to be specified, without being able to actually handle
trees within that multi-tree project; so for example,
you can only specify coreboot, and then it would run
on every coreboot tree.
Signed-off-by: Leah Rowe <leah@libreboot.org>
this is another alternative to the previous fix. this one
is therefore now a pre-emptive fix, in case other code is
written in the future that makes use of badhash.
the badhash variable in a y/n variable, so initialise to n.
Signed-off-by: Leah Rowe <leah@libreboot.org>
XBMK_CACHE is now used, instead of hardcoding cache/
this is exported initialised to cache/, if unset.
this means you can set your own directory, and it means
./update release will use the same directory.
this means bandwidth wastage is further avoided.
Signed-off-by: Leah Rowe <leah@libreboot.org>
if coreboot itself is being handled, crossgcc has the
correct makeargs, setting the number of build threads.
however, other projects can specify "xtree" pointing to
a given coreboot tree, and build crossgcc for it.
one workaround may be to use trees -d coreboot TREE,
but then extra code would have to be written to make
it avoid other things like building cbfstool, which is
not required for just building crossgcc.
the cleanest way to do it is to simply hardcode it. the
value is set exactly the same as regular coreboot makeargs.
this fixes a bug, where some builds of crossgcc are made
on a single thread, rather than using XBMK_THREADS. this
patch forces it to always use CPUS=$XBMK_THREADS
Signed-off-by: Leah Rowe <leah@libreboot.org>
we no longer need to remove cache/ per project, because
it's removed in bulk at the end, in the main build script,
when generating release archives.
Signed-off-by: Leah Rowe <leah@libreboot.org>
actual source code is not scanned, but config directories are
scanned. simply get the checksum of each file under config/
pertaining to a given project/tree, and also for the given
target. coreboot utilities are also handled.
if it changes, in any way, delete and re-build automatically.
such deletions should probably still be done manually, as part
of understanding the build system, but this change should make
the build system much easier to use during development.
Signed-off-by: Leah Rowe <leah@libreboot.org>
single-tree repos were not previously cached, but now
they are and they have to be handled.
this, as also alluded to in the previous commit, is done
when preparing release archives (XBMK_RELEASE=y)
Signed-off-by: Leah Rowe <leah@libreboot.org>
repo/p/ does not have its revision reset, so it
changes unpredictably, and it's not used in builds.
this used to be src/p/p/ - the context here is multi-tree
projects, in source archives.
Signed-off-by: Leah Rowe <leah@libreboot.org>
upstream has merged all of the changes that it contained,
so we don't need this anymore. we'll have the newer upstream
changes on the next general revision updates for coreboot,
within config/coreboot/
Signed-off-by: Leah Rowe <leah@libreboot.org>
configure_project is a bit big. move the dependencies
build logic to a new function.
it may be desirable in future to make the way that
function works the way all build commands are done.
for example:
./update trees -b coreboot x230_12mb
would become:
./update trees -b coreboot/x230_12mb
this would enable to mix and match multi/single tree
projects. for now, leave things as they are.
Signed-off-by: Leah Rowe <leah@libreboot.org>
we used to set cmd only to these values:
build_project
build_targets
however, now we set them to:
build_project
build_targets $@
the latter cannot be measured reliably, but
we were checking whether cmd equalled:
build_targets
now we instead check that it does not equal:
build_project
Signed-off-by: Leah Rowe <leah@libreboot.org>
main() used to be the only function executed from
outside of main(), in this script, but now we source
a config file and then run the build afterward.
when a flag is provided without OPTARG, this means
that we are continuing such action erroneously. to
mitigate this, return 1 in that instance, and handle
it in the line that calls main(), making it exit with
zero status (success).
Signed-off-by: Leah Rowe <leah@libreboot.org>
instead of using lots of if/else conditions, do that once
and set a variable, dry, to :
if not doing a dry run, the variable is empty. prefix this
variable in places where you don't want a certain action to
be performed, on dry runs.
more specifically, : does *nothing* and always returns with
zero status (success).
this results in cleaner code, and a small sloccount reduction.
Signed-off-by: Leah Rowe <leah@libreboot.org>
move the coreboot-specific includes into mkhelper.cfg
for that project.
on some projects, we need variables from mkhelper.cfg
to be global, so I was including serprog and coreboot
mkhelper.cfg files in this script.
instead, set a new variable "mkhelpercfg" pointing to
the config file. if it doesn't exist, create and then
point to a temporary (empty) mkhelper.cfg file.
the rom.sh include has been moved to coreboot mkhelper.cfg
The only remaining project-specific logic, in this trees
script, is now the coreboot crossgcc handling, but this
needs to be there as it's also used to build U-Boot.
The way this now works, certain includes are done twice.
For example, include/rom.sh will be included once globally,
outside of main(), and then again in configure_project().
This means that certain functions will be defined twice.
I'm uncertain if shell has anything equivalent to an ifdef
guard as in C, but we actually want this here anyway, and
it shouldn't cause any problems. It's a bit of a hack, but
otherwise results in much cleaner code.
Signed-off-by: Leah Rowe <leah@libreboot.org>
pro-tip: don't do this at 3AM
do massive changes like this, no later than 1AM.
the intent anyway is for -d to cause no build dependencies
to be handled, but the current logic says to only handle
them if -d is set! fix it by removing the ! part
Signed-off-by: Leah Rowe <leah@libreboot.org>
-d does the same as -b, except for actually building
anything! in effect, it does the same as -f (fetch)
except that the resulting variable assignments will
not be recursive (as with -f).
if -d is passed, configuration is still loaded, defconfig
files are still cycled through, and more importantly:
helper functions are still processed.
the grub, serprog and coreboot helper functions have
been modified to return early (zero status) if -d is
passed.
example usage:
./update trees -d coreboot x230_12mb
this would download the files, NOT build coreboot, and
NOT build the payloads.
there is one additional benefit to doing it this way:
the utils command has been removed, e.g.
./update trees -b coreboot utils default
the equivalent is now:
./update trees -d coreboot default
the overall effect of this change is that the trees script
no longer contains any project-specific logic, except for
the crossgcc build logic.
it does include some config/data mkhelper files at the top,
for serprog and coreboot, so that those variables defined in
those files can be global, but another solution to mitigate
that will also be implemented in a future commit.
the purpose of this and other revisions (in the final push
to complete lbmk audit 6 / cbmk audit 2) is to generalise as
much logic as possible, removing various ugly hacks.
Signed-off-by: Leah Rowe <leah@libreboot.org>
stub it from the trees script. the way it works now,
there is less code in the build system.
./build roms
this is no longer a thing
./build roms serprog
this is also no longer a thing. instead, do:
./update trees -b coreboot targetnamehere
./update trees -b pico-serprog
./update trees -b stm32-vserprog
the old commands still works, which causes the new
commands to run
coreboot roms now appear in elf/, not bin/, as before,
but those images now contain payloads.
NOTE: to contradict the above: ./build roms is no
longer a thing, in that it's now deprecated, but
backward compatibility is present for now. it will
be removed in a future release.
./build roms list also still works! it will do:
./update trees -b coreboot list
also:
./update trees -b grub list
this is now possible too
if a target "list" is provided, for multi-tree sources,
the targets are shown.
there is another difference: seagrub roms are now seagrub_,
instead of seabios_withgrub.
seabios-only roms are no longer provided, where grub is also
enabled; only seagrub is used. the user can easily remove
the bootorder file, if they want seabios to not try grub first.
Signed-off-by: Leah Rowe <leah@libreboot.org>
rename it to configure_project, because the function now
also handles building (a little bit), not just mere loading
of configuration files.
Signed-off-by: Leah Rowe <leah@libreboot.org>
We already have this to an extent, e.g. the xtree variable.
The xtree variable could probably be removed, in favour of
this, and used for the same purpose.
It works like this, for example:
build_depend="coreboot/default grub/xhci seabios u-boot/gru_bob flashprog"
the "/" denotes a tree, if it's a multi-tree project. However, specifying
the entire multi-tree project without slash is possible, for example:
build_depend="coreboot"
this would specify that all coreboot trees must be built.
This functionality will be used in follow-up commits, centralising
script/trees into mk on the main directory, repacing "build".
Signed-off-by: Leah Rowe <leah@libreboot.org>
stick the makeargs in mkhelper
i previously did cbmakeargs because the old revisions
had to define makeargs per-target otherwise. mkhelper
was done specifically to solve that problem.
Signed-off-by: Leah Rowe <leah@libreboot.org>
config/data/PROJECT/mkhelper.cfg can be provided, for
configuration, and it is loaded *before* target.cfg
there are certain instances where we repeat a lot of
config per tree, in multi-tree projects.
for example, we have the exact same config per grub
tree, besides tree name and revision number, for things
like autoconf arguments.
this last problem will be addressed, in a follow-up
patch, and then expanded upon for other projects.
Signed-off-by: Leah Rowe <leah@libreboot.org>
e.g. ./update trees -f
if passed, this command would download every tree
similarly, the -c option can be used in this way. this
solves a longstanding issue: on the current, much more
efficient design, it was not possible to systematically
clean every project.
Signed-off-by: Leah Rowe <leah@libreboot.org>
some of the variables only initialised in git.sh are
also used in the trees script, which is technically ok
because git.sh is included from the trees script, but
it makes more sense to declare them in the latter.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the git_prep function already creates the given
directory where source code goes, so we don't
need to do it from the trees script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
when downloading multi-tree projects, the rev can be reset
to HEAD instead of the actual rev for a given target. this
occurs when the bare repo (e.g. src/coreboot/coreboot) does
not exist and has to be downloaded first.
bare repository downloading does not rely on target.cfg, in
this context, only pkg.cfg, but it uses the same variable
names (e.g. "rev").
instead of using a separate variable name, thus increasing
code complexity (which is the exact opposite of what i want
to do), do the bare repository download first.
this means that the git.sh script is much cleaner now, for
multi-tree projects, in that it *only* copies the bare repo
then runs git_prep; in that context, the bare repo is cloned
directly by calling the relevant function from script/trees,
which is the same behaviour as when cloning single-tree
project sources.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the same function that loads configurations for single-tree
projects has been merged with the function for multi-tree
configs in git.sh, and that functionality has been removed
from git.sh; now it is all unified in the trees script.
as the saying goes: write one program to do one thing well.
the purpose of git.sh is to download source code, but not
to handle configuration files; the latter is meant to be
handled by the trees script, which then calls into git.sh
before running the build logic for that given project.
additionally: the "seen" files are no longer handled, at all.
the logic there was added ages ago, because at the time, i was
considering whether to separate configuration into a new
repository, so that users could more easily make their own
configuration, so it was a guard against misconfiguration.
however, that decision was canceled and we're always very
careful not to introduce a loop; if a loop does occur, the
worst that can possibly happen is you waste some CPU cycles.
Instead, print (on standard output) what config file is being
used, so the operator can see when an infinite loop occurs.
ALSO:
remove _setcfgarg in load_project_config()
it was used to skip when a target.cfg file didn't exist,
specifically on single-tree projects, but this is now
handled using -f instead, on the while loop inside that
function, so _setcfgarg is now a redundant variable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Leah Rowe