Always certainly redundant, since if -u -e isn't
set, it'll continue to exit anyway.
However, we want to be pedantic about this, since
the safety of lbmk relies entirely on this function
NOT misbehaving.
Signed-off-by: Leah Rowe <leah@libreboot.org>
it could be that some were left over before, for some
reason. that isn't currently the case, but this will
avoid the possibility in future.
therefore, this is a preemptive bug fix.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the initial checks are unnecessary, since i always know
what arguments are being provided.
the -f check in the for loop is now an -x instead, more
efficient and complete.
Signed-off-by: Leah Rowe <leah@libreboot.org>
If we're in a release work directory, TMPDIR is already
set, so the local ./tmp won't be created, which would
lead to an error.
Fix it by creating xbmklocal before checking TMPDIR.
Signed-off-by: Leah Rowe <leah@libreboot.org>
this silences confusing error messages that the user
sees on the screen, that are actually benign, and it
will thus reduce the number of people who ask questions
on #libreboot irc
Signed-off-by: Leah Rowe <leah@libreboot.org>
it's not a lot of code, and takes less than a second.
the previous change uses x instead of ?, but this would
cause an error if the nvmutil was already built, because
the makefile might cause a build to be skipped.
therefore, force a re-build to mitigate the error.
Signed-off-by: Leah Rowe <leah@libreboot.org>
A user reported that '?' causes an error on zsh. See:
https://codeberg.org/libreboot/lbmk/issues/261
For example:
./mk inject libreboot-XXXXXX.tar.xz setmac ??:??:??:??:??:??
The user got:
zsh: no matches found: ??:??:??:??:??:??
The mitigation here is to double-quote, e.g.:
./mk inject libreboot-XXXXXX.tar.xz setmac "??:??:??:??:??:??"
However, a lot of people won't do that. Therefore, I will
retain the current behaviour but support x/X for randomness.
Now lbmk uses x by default, instead. I will now update the
documentation, accordingly.
Signed-off-by: Leah Rowe <leah@libreboot.org>
not to be confused with /tmp
we use ./tmp inside the lbmk work directory, for large files,
because /tmp might not be very big, or might be a tmpfs
Signed-off-by: Leah Rowe <leah@libreboot.org>
In the mk script, we need fx_ to not return errors on the
find command, since it's searching a bunch of directories
where some of them may not exist.
All other instances where fx_ is used, must return an error
if the directory being searched doesn't exist.
For this, fe_() is introduced, which does the same as fx_
but with this much stricter check.
Signed-off-by: Leah Rowe <leah@libreboot.org>
We have a lot of places in lbmk where the output of find is
used, and then some function is executed on the result.
This is messy, and bloats several of these functions.
Now this is unified, into a new function: fx_
What fx_ does is execute a given function, for each result
found, with the arguments for a find command appended.
For example:
find -name ".git"
If you wanted to do: foo "$arg"
Where "arg" is a search result from find, and you wanted
to execute "foo" on each one, you would do:
fx_ foo -name ".git"
The find utility does have an -exec feature, but I've found
that it only works for executables, not functions.
fx_ does not return errors, so "foo" in this example
would have to do its own error handling.
Signed-off-by: Leah Rowe <leah@libreboot.org>
remove it from mkhelper files, because rom.sh doesn't
initialise any variables globally, except one that
never changes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
these functions make more sense in lib.sh
i made mk link lib.sh first, so that the
functions on init.sh can still use them.
Signed-off-by: Leah Rowe <leah@libreboot.org>
I fixed the AHCI bug, with a patch that I wrote. It works by
restoring the old SeaBIOS AHCI initialisation behaviour, whereby
the AHCI controller is enabled from its current state; the patch
that broke AHCI in coreboot (tested on ThinkPad T420), changed
AHCI initialisation behaviour so that the controller's state is
first reset, prior to enablement.
However, my patch also retains the new AHCI initialisation
behaviour, when a CSM is in use. The AHCI reset patch was done,
by the author, specifically for SeaBIOS in CSM mode, so it makes
sense to only change the behaviour conditionally according to that.
This reverts commit 8245f0b3211812ac818adadd6526b0b39c63f3f0.
Signed-off-by: Leah Rowe <leah@libreboot.org>
This reverts commit a08b8d94fc58fa195adb0261539509d8ddaf4799.
From #libreboot IRC today:
07:02 <irys> ooh this is fun. seabios commit 8863cbbd15a73b03153553c562f5b1fb939ad4d7 (ahci: add controller reset) breaks ahci entirely on t420
07:05 <irys> cbmem console on that seabios commit has a timeout then "AHCI/0: device not ready"
07:07 <irys> AHCI works fine if i change config/seabios/default/target.cfg to use the immediate previous seabios commit (df9dd418b3b0e586cb208125094620fc7f90f23d)
07:07 <irys> works in grub payload either way though
07:31 <irys> here, `cbmem -c` after booting the broken rev: https://0x0.st/84oQ.log
07:31 <irys> compared to the working one https://0x0.st/84o1.log
07:33 <irys> i can't report to upstream myself *right now* but i figure you might want to know about this leah
I have downloaded those logs locally for reference, so that an upstream
report can be made to SeaBIOS. For the purposes of this Libreboot commit,
the diff of the logs is as follows (diff -u broken.log working.log):
Taking each diff line out of the log, the relevant entries
seem to be:
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
+AHCI/0: Set transfer mode to UDMA-6
+Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0
+AHCI/0: registering: "AHCI/0: Netac SSD 128GB ATA-11 Hard-Disk (119 GiBytes)"
-WARNING - Timeout at ahci_port_setup:477!
-AHCI/0: device not ready (tf 0x80)
-All threads complete.
-2. Payload [memtest]
+2. AHCI/0: Netac SSD 128GB ATA-11 Hard-Disk (119 GiBytes)
+3. Payload [memtest]
-Space available for UMB: c7000-eb800, f5880-f5ff0
-Returned 16777216 bytes of ZoneHigh
+drive 0x000f5fa0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=250069680
+Space available for UMB: c7000-eb800, f5880-f5fa0
+Returned 16773120 bytes of ZoneHigh
Therefore, the revision will be reverted back for now. It was
only about 8 additional patches imported in the update anyway.
while cherry picking other recent lbmk changes, i
skipped the coreboot updates, because the lbmk ones
were done in mayn commits. it's more efficient just
to do it all in bulk, when adapting for canoeboot.
Signed-off-by: Leah Rowe <leah@libreboot.org>
src/rp2_common/boot_stage2/boot2_w25x10cl.S:142: Error: junk at end of line, first unrecognized character is `0'
src/rp2_common/boot_stage2/boot2_w25x10cl.S:145: Error: garbage following instruction -- `beq 00b'
This should also fix it on Debian sid Experimental, where I'm testing
with GCC 15 and other bleeding edge dependencies.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Many users report bugs, so I'm reverting lbmk back to only
supporting the rp2040 dongles for the time being. The
documentation will be updated to reflect this.
Pico2 support will be re-added at a later date, once more
testing has been done, and fixes made if necessary.
This brings in the following improvements from upstream:
* 9029a010 kconfig: fix the check-lxdialog.sh to work with gcc 14+
* 8863cbbd ahci: add controller reset
* df9dd418 update pci_pad_mem64 handling
* a4fc1845 add romfile_loadbool()
* a2725e28 drop acpi tables and hex includes
* 35aa9a72 drop obsolete acpi table code
* 1b598a1d usb-hid: Support multiple USB HID devices by storing them in a linked list
Signed-off-by: Leah Rowe <leah@libreboot.org>
One of our SeaBIOS patches causes build errors with GCC 15:
src/romfile.c: In function 'romfile_loadfile_g':
src/romfile.c:65:18: error: too many arguments to function 'malloc_fn'; expected 0, have 1
65 | char *data = malloc_fn(filesize+add_len);
| ^~~~~~~~~ ~~~~~~~~~~~~~~~~
src/romfile.c: In function 'romfile_loadfile':
src/romfile.c:88:50: error: passing argument 3 of 'romfile_loadfile_g' from incompatible pointer type [-Wincompatible-pointer-types]
88 | char *data = romfile_loadfile_g(name, psize, &malloc_tmphigh, 1);
| ^~~~~~~~~~~~~~~
| |
| void * (*)(u32) {aka void * (*)(unsigned int)}
src/romfile.c:55:28: note: expected 'void * (*)(void)' but argument is of type 'void * (*)(u32)' {aka 'void * (*)(unsigned int)'}
55 | void *(*malloc_fn)(), int add_len)
| ~~~~~~~~^~~~~~~~~~~~
In file included from src/romfile.c:8:
src/malloc.h:42:21: note: 'malloc_tmphigh' declared here
42 | static inline void *malloc_tmphigh(u32 size) {
| ^~~~~~~~~~~~~~
make: *** [Makefile:142: out/src/romfile.o] Error 1
make: *** Waiting for unfinished jobs....
src/optionroms.c: In function 'vgarom_setup':
src/optionroms.c:468:60: error: passing argument 3 of 'romfile_loadfile_g' from incompatible pointer type [-Wincompatible-pointer-types]
468 | void *mxm_sis = romfile_loadfile_g("mxm-30-sis", NULL, &malloc_low, 0);
| ^~~~~~~~~~~
| |
| void * (*)(u32) {aka void * (*)(unsigned int)}
In file included from src/optionroms.c:18:
src/romfile.h:17:34: note: expected 'void * (*)(void)' but argument is of type 'void * (*)(u32)' {aka 'void * (*)(unsigned int)'}
17 | void *(*malloc_fn)(), int add_len);
| ~~~~~~~~^~~~~~~~~~~~
In file included from src/optionroms.c:16:
src/malloc.h:30:21: note: 'malloc_low' declared here
30 | static inline void *malloc_low(u32 size) {
| ^~~~~~~~~~
make: *** [Makefile:141: out/src/optionroms.o] Error 1
make: Leaving directory '/tmp/lbmk/src/seabios/default'
This is because the function pointer defined as `void *(*malloc_fn)()`
refers to a function that takes no arguments, unlike `malloc_tmphigh`
which takes an unsigned int. Add the missing argument type.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The Debian package for libusb is "libusb-1.0-0". Fix the typo in the
list which is missing the suffix. While we're here, also fix a line
continuation.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Leah Rowe