diff --git a/site/docs/install/index.md b/site/docs/install/index.md
index 88dacb4..359745d 100644
--- a/site/docs/install/index.md
+++ b/site/docs/install/index.md
@@ -308,7 +308,14 @@ example of the push pin as a proof of concept:
 
 [You must flash it externally](spi.md)
 
-#### ThinkPad X60/X60S/X60T/T60 with Lenovo BIOS {#flashprog_lenovobios}
+#### ThinkPad X60/X60S/X60T/T60 with Lenovo BIOS {#flashrom_lenovobios}
+
+**NOTE: the section below pertaining to Libreboot 20160907 static binaries references
+flashrom. Canoeboot recommends flashprog nowadays, but if you're using that
+utils archive, please note that it is from a time when Canoeboot used
+flashrom. Use flashrom there as that's what included in those binaries.
+Canoeboot does not currently document how to patch flashprog for sst/macronix
+on X60/T60, when going (in software) from lenovobios to canoeboot.**
 
 NOTE: If BIOS password auth is enabled, you can clear it by shorting pins on
 an EEPROM and then resetting the password in Lenovo BIOS, prior to flashing