cog/Frameworks/Vorbis/doc/06-floor0.tex

193 lines
8.3 KiB
TeX
Raw Normal View History

% -*- mode: latex; TeX-master: "Vorbis_I_spec"; -*-
%!TEX root = Vorbis_I_spec.tex
% $Id$
\section{Floor type 0 setup and decode} \label{vorbis:spec:floor0}
\subsection{Overview}
Vorbis floor type zero uses Line Spectral Pair (LSP, also alternately
known as Line Spectral Frequency or LSF) representation to encode a
smooth spectral envelope curve as the frequency response of the LSP
filter. This representation is equivalent to a traditional all-pole
infinite impulse response filter as would be used in linear predictive
coding; LSP representation may be converted to LPC representation and
vice-versa.
\subsection{Floor 0 format}
Floor zero configuration consists of six integer fields and a list of
VQ codebooks for use in coding/decoding the LSP filter coefficient
values used by each frame.
\subsubsection{header decode}
Configuration information for instances of floor zero decodes from the
codec setup header (third packet). configuration decode proceeds as
follows:
\begin{Verbatim}[commandchars=\\\{\}]
1) [floor0\_order] = read an unsigned integer of 8 bits
2) [floor0\_rate] = read an unsigned integer of 16 bits
3) [floor0\_bark\_map\_size] = read an unsigned integer of 16 bits
4) [floor0\_amplitude\_bits] = read an unsigned integer of six bits
5) [floor0\_amplitude\_offset] = read an unsigned integer of eight bits
6) [floor0\_number\_of\_books] = read an unsigned integer of four bits and add 1
7) array [floor0\_book\_list] = read a list of [floor0\_number\_of\_books] unsigned integers of eight bits each;
\end{Verbatim}
An end-of-packet condition during any of these bitstream reads renders
this stream undecodable. In addition, any element of the array
\varname{[floor0\_book\_list]} that is greater than the maximum codebook
number for this bitstream is an error condition that also renders the
stream undecodable.
\subsubsection{packet decode} \label{vorbis:spec:floor0-decode}
Extracting a floor0 curve from an audio packet consists of first
decoding the curve amplitude and \varname{[floor0\_order]} LSP
coefficient values from the bitstream, and then computing the floor
curve, which is defined as the frequency response of the decoded LSP
filter.
Packet decode proceeds as follows:
\begin{Verbatim}[commandchars=\\\{\}]
1) [amplitude] = read an unsigned integer of [floor0\_amplitude\_bits] bits
2) if ( [amplitude] is greater than zero ) \{
3) [coefficients] is an empty, zero length vector
4) [booknumber] = read an unsigned integer of \link{vorbis:spec:ilog}{ilog}( [floor0\_number\_of\_books] ) bits
5) if ( [booknumber] is greater than the highest number decode codebook ) then packet is undecodable
6) [last] = zero;
7) vector [temp\_vector] = read vector from bitstream using codebook number [floor0\_book\_list] element [booknumber] in VQ context.
8) add the scalar value [last] to each scalar in vector [temp\_vector]
9) [last] = the value of the last scalar in vector [temp\_vector]
10) concatenate [temp\_vector] onto the end of the [coefficients] vector
11) if (length of vector [coefficients] is less than [floor0\_order], continue at step 6
\}
12) done.
\end{Verbatim}
Take note of the following properties of decode:
\begin{itemize}
\item An \varname{[amplitude]} value of zero must result in a return code that indicates this channel is unused in this frame (the output of the channel will be all-zeroes in synthesis). Several later stages of decode don't occur for an unused channel.
\item An end-of-packet condition during decode should be considered a
nominal occruence; if end-of-packet is reached during any read
operation above, floor decode is to return 'unused' status as if the
\varname{[amplitude]} value had read zero at the beginning of decode.
\item The book number used for decode
can, in fact, be stored in the bitstream in \link{vorbis:spec:ilog}{ilog}( \varname{[floor0\_number\_of\_books]} -
1 ) bits. Nevertheless, the above specification is correct and values
greater than the maximum possible book value are reserved.
\item The number of scalars read into the vector \varname{[coefficients]}
may be greater than \varname{[floor0\_order]}, the number actually
required for curve computation. For example, if the VQ codebook used
for the floor currently being decoded has a
\varname{[codebook\_dimensions]} value of three and
\varname{[floor0\_order]} is ten, the only way to fill all the needed
scalars in \varname{[coefficients]} is to to read a total of twelve
scalars as four vectors of three scalars each. This is not an error
condition, and care must be taken not to allow a buffer overflow in
decode. The extra values are not used and may be ignored or discarded.
\end{itemize}
\subsubsection{curve computation} \label{vorbis:spec:floor0-synth}
Given an \varname{[amplitude]} integer and \varname{[coefficients]}
vector from packet decode as well as the [floor0\_order],
[floor0\_rate], [floor0\_bark\_map\_size], [floor0\_amplitude\_bits] and
[floor0\_amplitude\_offset] values from floor setup, and an output
vector size \varname{[n]} specified by the decode process, we compute a
floor output vector.
If the value \varname{[amplitude]} is zero, the return value is a
length \varname{[n]} vector with all-zero scalars. Otherwise, begin by
assuming the following definitions for the given vector to be
synthesized:
\begin{displaymath}
\mathrm{map}_i = \left\{
\begin{array}{ll}
\min (
\mathtt{floor0\texttt{\_}bark\texttt{\_}map\texttt{\_}size} - 1,
foobar
) & \textrm{for } i \in [0,n-1] \\
-1 & \textrm{for } i = n
\end{array}
\right.
\end{displaymath}
where
\begin{displaymath}
foobar =
\left\lfloor
\mathrm{bark}\left(\frac{\mathtt{floor0\texttt{\_}rate} \cdot i}{2n}\right) \cdot \frac{\mathtt{floor0\texttt{\_}bark\texttt{\_}map\texttt{\_}size}} {\mathrm{bark}(.5 \cdot \mathtt{floor0\texttt{\_}rate})}
\right\rfloor
\end{displaymath}
and
\begin{displaymath}
\mathrm{bark}(x) = 13.1 \arctan (.00074x) + 2.24 \arctan (.0000000185x^2 + .0001x)
\end{displaymath}
The above is used to synthesize the LSP curve on a Bark-scale frequency
axis, then map the result to a linear-scale frequency axis.
Similarly, the below calculation synthesizes the output LSP curve \varname{[output]} on a log
(dB) amplitude scale, mapping it to linear amplitude in the last step:
\begin{enumerate}
\item \varname{[i]} = 0
\item \varname{[$\omega$]} = $\pi$ * map element \varname{[i]} / \varname{[floor0\_bark\_map\_size]}
\item if ( \varname{[floor0\_order]} is odd ) {
\begin{enumerate}
\item calculate \varname{[p]} and \varname{[q]} according to:
\begin{eqnarray*}
p & = & (1 - \cos^2\omega)\prod_{j=0}^{\frac{\mathtt{floor0\texttt{\_}order}-3}{2}} 4 (\cos([\mathtt{coefficients}]_{2j+1}) - \cos \omega)^2 \\
q & = & \frac{1}{4} \prod_{j=0}^{\frac{\mathtt{floor0\texttt{\_}order}-1}{2}} 4 (\cos([\mathtt{coefficients}]_{2j}) - \cos \omega)^2
\end{eqnarray*}
\end{enumerate}
} else \varname{[floor0\_order]} is even {
\begin{enumerate}[resume]
\item calculate \varname{[p]} and \varname{[q]} according to:
\begin{eqnarray*}
p & = & \frac{(1 - \cos\omega)}{2} \prod_{j=0}^{\frac{\mathtt{floor0\texttt{\_}order}-2}{2}} 4 (\cos([\mathtt{coefficients}]_{2j+1}) - \cos \omega)^2 \\
q & = & \frac{(1 + \cos\omega)}{2} \prod_{j=0}^{\frac{\mathtt{floor0\texttt{\_}order}-2}{2}} 4 (\cos([\mathtt{coefficients}]_{2j}) - \cos \omega)^2
\end{eqnarray*}
\end{enumerate}
}
\item calculate \varname{[linear\_floor\_value]} according to:
\begin{displaymath}
\exp \left( .11512925 \left(\frac{\mathtt{amplitude} \cdot \mathtt{floor0\texttt{\_}amplitute\texttt{\_}offset}}{(2^{\mathtt{floor0\texttt{\_}amplitude\texttt{\_}bits}}-1)\sqrt{p+q}}
- \mathtt{floor0\texttt{\_}amplitude\texttt{\_}offset} \right) \right)
\end{displaymath}
\item \varname{[iteration\_condition]} = map element \varname{[i]}
\item \varname{[output]} element \varname{[i]} = \varname{[linear\_floor\_value]}
\item increment \varname{[i]}
\item if ( map element \varname{[i]} is equal to \varname{[iteration\_condition]} ) continue at step 5
\item if ( \varname{[i]} is less than \varname{[n]} ) continue at step 2
\item done
\end{enumerate}