2015-11-27 10:02:41 +00:00
|
|
|
/*
|
|
|
|
* Sega System 32 Multi/Model 1/Model 2 custom PCM chip (315-5560) emulation.
|
|
|
|
*
|
|
|
|
* by Miguel Angel Horna (ElSemi) for Model 2 Emulator and MAME.
|
|
|
|
* Information by R.Belmont and the YMF278B (OPL4) manual.
|
|
|
|
*
|
|
|
|
* voice registers:
|
|
|
|
* 0: Pan
|
|
|
|
* 1: Index of sample
|
|
|
|
* 2: LSB of pitch (low 2 bits seem unused so)
|
|
|
|
* 3: MSB of pitch (ooooppppppppppxx) (o=octave (4 bit signed), p=pitch (10 bits), x=unused?
|
|
|
|
* 4: voice control: top bit = 1 for key on, 0 for key off
|
|
|
|
* 5: bit 0: 0: interpolate volume changes, 1: direct set volume,
|
|
|
|
bits 1-7 = volume attenuate (0=max, 7f=min)
|
|
|
|
* 6: LFO frequency + Phase LFO depth
|
|
|
|
* 7: Amplitude LFO size
|
|
|
|
*
|
|
|
|
* The first sample ROM contains a variable length table with 12
|
|
|
|
* bytes per instrument/sample. This is very similar to the YMF278B.
|
|
|
|
*
|
|
|
|
* The first 3 bytes are the offset into the file (big endian).
|
|
|
|
* The next 2 are the loop start offset into the file (big endian)
|
|
|
|
* The next 2 are the 2's complement of the total sample size (big endian)
|
|
|
|
* The next byte is LFO freq + depth (copied to reg 6 ?)
|
|
|
|
* The next 3 are envelope params (Attack, Decay1 and 2, sustain level, release, Key Rate Scaling)
|
|
|
|
* The next byte is Amplitude LFO size (copied to reg 7 ?)
|
|
|
|
*
|
|
|
|
* TODO
|
|
|
|
* - The YM278B manual states that the chip supports 512 instruments. The MultiPCM probably supports them
|
|
|
|
* too but the high bit position is unknown (probably reg 2 low bit). Any game use more than 256?
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
//#include "emu.h"
|
|
|
|
//#include "streams.h"
|
|
|
|
#include "mamedef.h"
|
|
|
|
#include <math.h>
|
2016-07-02 09:57:36 +00:00
|
|
|
#include <string.h>
|
2015-11-27 10:02:41 +00:00
|
|
|
#include <stdlib.h>
|
|
|
|
#include "multipcm.h"
|
|
|
|
|
2016-07-02 09:57:36 +00:00
|
|
|
#ifndef NULL
|
2015-11-27 10:02:41 +00:00
|
|
|
#define NULL ((void *)0)
|
2016-07-02 09:57:36 +00:00
|
|
|
#endif
|
2015-11-27 10:02:41 +00:00
|
|
|
|
|
|
|
//????
|
|
|
|
#define MULTIPCM_CLOCKDIV (180.0)
|
|
|
|
|
|
|
|
struct _Sample
|
|
|
|
{
|
|
|
|
unsigned int Start;
|
|
|
|
unsigned int Loop;
|
|
|
|
unsigned int End;
|
|
|
|
unsigned char AR,DR1,DR2,DL,RR;
|
|
|
|
unsigned char KRS;
|
|
|
|
unsigned char LFOVIB;
|
|
|
|
unsigned char AM;
|
|
|
|
};
|
|
|
|
|
|
|
|
typedef enum {ATTACK,DECAY1,DECAY2,RELEASE} _STATE;
|
|
|
|
struct _EG
|
|
|
|
{
|
|
|
|
int volume; //
|
|
|
|
_STATE state;
|
|
|
|
int step;
|
|
|
|
//step vals
|
|
|
|
int AR; //Attack
|
|
|
|
int D1R; //Decay1
|
|
|
|
int D2R; //Decay2
|
|
|
|
int RR; //Release
|
|
|
|
int DL; //Decay level
|
|
|
|
};
|
|
|
|
|
|
|
|
struct _LFO
|
|
|
|
{
|
|
|
|
unsigned short phase;
|
|
|
|
UINT32 phase_step;
|
|
|
|
int *table;
|
|
|
|
int *scale;
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
struct _SLOT
|
|
|
|
{
|
|
|
|
unsigned char Num;
|
|
|
|
unsigned char Regs[8];
|
|
|
|
int Playing;
|
|
|
|
struct _Sample *Sample;
|
|
|
|
unsigned int Base;
|
|
|
|
unsigned int offset;
|
|
|
|
unsigned int step;
|
|
|
|
unsigned int Pan,TL;
|
|
|
|
unsigned int DstTL;
|
|
|
|
int TLStep;
|
|
|
|
signed int Prev;
|
|
|
|
struct _EG EG;
|
|
|
|
struct _LFO PLFO; //Phase lfo
|
|
|
|
struct _LFO ALFO; //AM lfo
|
|
|
|
|
|
|
|
UINT8 Muted;
|
|
|
|
};
|
|
|
|
|
|
|
|
typedef struct _MultiPCM MultiPCM;
|
|
|
|
struct _MultiPCM
|
|
|
|
{
|
|
|
|
//sound_stream * stream;
|
|
|
|
struct _Sample Samples[0x200]; //Max 512 samples
|
|
|
|
struct _SLOT Slots[28];
|
|
|
|
unsigned int CurSlot;
|
|
|
|
unsigned int Address;
|
|
|
|
unsigned int BankR,BankL;
|
|
|
|
float Rate;
|
|
|
|
UINT32 ROMMask;
|
|
|
|
UINT32 ROMSize;
|
|
|
|
INT8 *ROM;
|
|
|
|
//I include these in the chip because they depend on the chip clock
|
|
|
|
unsigned int ARStep[0x40],DRStep[0x40]; //Envelope step table
|
|
|
|
unsigned int FNS_Table[0x400]; //Frequency step table
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static UINT8 IsInit = 0x00;
|
|
|
|
static signed int LPANTABLE[0x800],RPANTABLE[0x800];
|
|
|
|
|
|
|
|
#define FIX(v) ((UINT32) ((float) (1<<SHIFT)*(v)))
|
|
|
|
|
|
|
|
static const int val2chan[] =
|
|
|
|
{
|
|
|
|
0, 1, 2, 3, 4, 5, 6 , -1,
|
|
|
|
7, 8, 9, 10,11,12,13, -1,
|
|
|
|
14,15,16,17,18,19,20, -1,
|
|
|
|
21,22,23,24,25,26,27, -1,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#define SHIFT 12
|
|
|
|
|
|
|
|
|
|
|
|
#define MULTIPCM_RATE 44100.0
|
|
|
|
|
|
|
|
|
|
|
|
/*INLINE MultiPCM *get_safe_token(running_device *device)
|
|
|
|
{
|
|
|
|
assert(device != NULL);
|
|
|
|
assert(device->type() == MULTIPCM);
|
|
|
|
return (MultiPCM *)downcast<legacy_device_base *>(device)->token();
|
|
|
|
}*/
|
|
|
|
|
|
|
|
|
|
|
|
/*******************************
|
|
|
|
ENVELOPE SECTION
|
|
|
|
*******************************/
|
|
|
|
|
|
|
|
//Times are based on a 44100Hz timebase. It's adjusted to the actual sampling rate on startup
|
|
|
|
|
|
|
|
static const double BaseTimes[64]={0,0,0,0,6222.95,4978.37,4148.66,3556.01,3111.47,2489.21,2074.33,1778.00,1555.74,1244.63,1037.19,889.02,
|
|
|
|
777.87,622.31,518.59,444.54,388.93,311.16,259.32,222.27,194.47,155.60,129.66,111.16,97.23,77.82,64.85,55.60,
|
|
|
|
48.62,38.91,32.43,27.80,24.31,19.46,16.24,13.92,12.15,9.75,8.12,6.98,6.08,4.90,4.08,3.49,
|
|
|
|
3.04,2.49,2.13,1.90,1.72,1.41,1.18,1.04,0.91,0.73,0.59,0.50,0.45,0.45,0.45,0.45};
|
|
|
|
#define AR2DR 14.32833
|
|
|
|
static signed int lin2expvol[0x400];
|
|
|
|
static int TLSteps[2];
|
|
|
|
|
|
|
|
#define EG_SHIFT 16
|
|
|
|
|
|
|
|
static int EG_Update(struct _SLOT *slot)
|
|
|
|
{
|
|
|
|
switch(slot->EG.state)
|
|
|
|
{
|
|
|
|
case ATTACK:
|
|
|
|
slot->EG.volume+=slot->EG.AR;
|
|
|
|
if(slot->EG.volume>=(0x3ff<<EG_SHIFT))
|
|
|
|
{
|
|
|
|
slot->EG.state=DECAY1;
|
|
|
|
if(slot->EG.D1R>=(0x400<<EG_SHIFT)) //Skip DECAY1, go directly to DECAY2
|
|
|
|
slot->EG.state=DECAY2;
|
|
|
|
slot->EG.volume=0x3ff<<EG_SHIFT;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case DECAY1:
|
|
|
|
slot->EG.volume-=slot->EG.D1R;
|
|
|
|
if(slot->EG.volume<=0)
|
|
|
|
slot->EG.volume=0;
|
|
|
|
if(slot->EG.volume>>EG_SHIFT<=(slot->EG.DL<<(10-4)))
|
|
|
|
slot->EG.state=DECAY2;
|
|
|
|
break;
|
|
|
|
case DECAY2:
|
|
|
|
slot->EG.volume-=slot->EG.D2R;
|
|
|
|
if(slot->EG.volume<=0)
|
|
|
|
slot->EG.volume=0;
|
|
|
|
break;
|
|
|
|
case RELEASE:
|
|
|
|
slot->EG.volume-=slot->EG.RR;
|
|
|
|
if(slot->EG.volume<=0)
|
|
|
|
{
|
|
|
|
slot->EG.volume=0;
|
|
|
|
slot->Playing=0;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return 1<<SHIFT;
|
|
|
|
}
|
|
|
|
return lin2expvol[slot->EG.volume>>EG_SHIFT];
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int Get_RATE(unsigned int *Steps,unsigned int rate,unsigned int val)
|
|
|
|
{
|
|
|
|
int r=4*val+rate;
|
|
|
|
if(val==0)
|
|
|
|
return Steps[0];
|
|
|
|
if(val==0xf)
|
|
|
|
return Steps[0x3f];
|
|
|
|
if(r>0x3f)
|
|
|
|
r=0x3f;
|
|
|
|
return Steps[r];
|
|
|
|
}
|
|
|
|
|
|
|
|
static void EG_Calc(MultiPCM *ptChip,struct _SLOT *slot)
|
|
|
|
{
|
|
|
|
int octave=((slot->Regs[3]>>4)-1)&0xf;
|
|
|
|
int rate;
|
|
|
|
if(octave&8) octave=octave-16;
|
|
|
|
if(slot->Sample->KRS!=0xf)
|
|
|
|
rate=(octave+slot->Sample->KRS)*2+((slot->Regs[3]>>3)&1);
|
|
|
|
else
|
|
|
|
rate=0;
|
|
|
|
|
|
|
|
slot->EG.AR=Get_RATE(ptChip->ARStep,rate,slot->Sample->AR);
|
|
|
|
slot->EG.D1R=Get_RATE(ptChip->DRStep,rate,slot->Sample->DR1);
|
|
|
|
slot->EG.D2R=Get_RATE(ptChip->DRStep,rate,slot->Sample->DR2);
|
|
|
|
slot->EG.RR=Get_RATE(ptChip->DRStep,rate,slot->Sample->RR);
|
|
|
|
slot->EG.DL=0xf-slot->Sample->DL;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
/*****************************
|
|
|
|
LFO SECTION
|
|
|
|
*****************************/
|
|
|
|
|
|
|
|
#define LFO_SHIFT 8
|
|
|
|
|
|
|
|
|
|
|
|
#define LFIX(v) ((unsigned int) ((float) (1<<LFO_SHIFT)*(v)))
|
|
|
|
|
|
|
|
//Convert DB to multiply amplitude
|
|
|
|
#define DB(v) LFIX(pow(10.0,v/20.0))
|
|
|
|
|
|
|
|
//Convert cents to step increment
|
|
|
|
#define CENTS(v) LFIX(pow(2.0,v/1200.0))
|
|
|
|
|
|
|
|
static int PLFO_TRI[256];
|
|
|
|
static int ALFO_TRI[256];
|
|
|
|
|
|
|
|
static const float LFOFreq[8]={0.168f,2.019f,3.196f,4.206f,5.215f,5.888f,6.224f,7.066f}; //Hz;
|
|
|
|
static const float PSCALE[8]={0.0f,3.378f,5.065f,6.750f,10.114f,20.170f,40.180f,79.307f}; //cents
|
|
|
|
static const float ASCALE[8]={0.0f,0.4f,0.8f,1.5f,3.0f,6.0f,12.0f,24.0f}; //DB
|
|
|
|
static int PSCALES[8][256];
|
|
|
|
static int ASCALES[8][256];
|
|
|
|
|
|
|
|
static void LFO_Init(void)
|
|
|
|
{
|
|
|
|
int i,s;
|
|
|
|
for(i=0;i<256;++i)
|
|
|
|
{
|
|
|
|
int a; //amplitude
|
|
|
|
int p; //phase
|
|
|
|
|
|
|
|
//Tri
|
|
|
|
if(i<128)
|
|
|
|
a=255-(i*2);
|
|
|
|
else
|
|
|
|
a=(i*2)-256;
|
|
|
|
if(i<64)
|
|
|
|
p=i*2;
|
|
|
|
else if(i<128)
|
|
|
|
p=255-i*2;
|
|
|
|
else if(i<192)
|
|
|
|
p=256-i*2;
|
|
|
|
else
|
|
|
|
p=i*2-511;
|
|
|
|
ALFO_TRI[i]=a;
|
|
|
|
PLFO_TRI[i]=p;
|
|
|
|
}
|
|
|
|
|
|
|
|
for(s=0;s<8;++s)
|
|
|
|
{
|
|
|
|
float limit=PSCALE[s];
|
|
|
|
for(i=-128;i<128;++i)
|
|
|
|
{
|
|
|
|
PSCALES[s][i+128]=CENTS(((limit*(float) i)/128.0));
|
|
|
|
}
|
|
|
|
limit=-ASCALE[s];
|
|
|
|
for(i=0;i<256;++i)
|
|
|
|
{
|
|
|
|
ASCALES[s][i]=DB(((limit*(float) i)/256.0));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
INLINE signed int PLFO_Step(struct _LFO *LFO)
|
|
|
|
{
|
|
|
|
int p;
|
|
|
|
LFO->phase+=LFO->phase_step;
|
|
|
|
p=LFO->table[(LFO->phase>>LFO_SHIFT)&0xff];
|
|
|
|
p=LFO->scale[p+128];
|
|
|
|
return p<<(SHIFT-LFO_SHIFT);
|
|
|
|
}
|
|
|
|
|
|
|
|
INLINE signed int ALFO_Step(struct _LFO *LFO)
|
|
|
|
{
|
|
|
|
int p;
|
|
|
|
LFO->phase+=LFO->phase_step;
|
|
|
|
p=LFO->table[(LFO->phase>>LFO_SHIFT)&0xff];
|
|
|
|
p=LFO->scale[p];
|
|
|
|
return p<<(SHIFT-LFO_SHIFT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void LFO_ComputeStep(MultiPCM *ptChip,struct _LFO *LFO,UINT32 LFOF,UINT32 LFOS,int ALFO)
|
|
|
|
{
|
|
|
|
float step=(float) LFOFreq[LFOF]*256.0/(float) ptChip->Rate;
|
|
|
|
LFO->phase_step=(unsigned int) ((float) (1<<LFO_SHIFT)*step);
|
|
|
|
if(ALFO)
|
|
|
|
{
|
|
|
|
LFO->table=ALFO_TRI;
|
|
|
|
LFO->scale=ASCALES[LFOS];
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
LFO->table=PLFO_TRI;
|
|
|
|
LFO->scale=PSCALES[LFOS];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void WriteSlot(MultiPCM *ptChip,struct _SLOT *slot,int reg,unsigned char data)
|
|
|
|
{
|
|
|
|
slot->Regs[reg]=data;
|
|
|
|
|
|
|
|
switch(reg)
|
|
|
|
{
|
|
|
|
case 0: //PANPOT
|
|
|
|
slot->Pan=(data>>4)&0xf;
|
|
|
|
break;
|
|
|
|
case 1: //Sample
|
|
|
|
//according to YMF278 sample write causes some base params written to the regs (envelope+lfos)
|
|
|
|
//the game should never change the sample while playing.
|
|
|
|
{
|
|
|
|
struct _Sample *Sample=ptChip->Samples+slot->Regs[1];
|
|
|
|
WriteSlot(ptChip,slot,6,Sample->LFOVIB);
|
|
|
|
WriteSlot(ptChip,slot,7,Sample->AM);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 2: //Pitch
|
|
|
|
case 3:
|
|
|
|
{
|
|
|
|
unsigned int oct=((slot->Regs[3]>>4)-1)&0xf;
|
|
|
|
unsigned int pitch=((slot->Regs[3]&0xf)<<6)|(slot->Regs[2]>>2);
|
|
|
|
pitch=ptChip->FNS_Table[pitch];
|
|
|
|
if(oct&0x8)
|
|
|
|
pitch>>=(16-oct);
|
|
|
|
else
|
|
|
|
pitch<<=oct;
|
|
|
|
slot->step=pitch/ptChip->Rate;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 4: //KeyOn/Off (and more?)
|
|
|
|
{
|
|
|
|
if(data&0x80) //KeyOn
|
|
|
|
{
|
|
|
|
slot->Sample=ptChip->Samples+slot->Regs[1];
|
|
|
|
slot->Playing=1;
|
|
|
|
slot->Base=slot->Sample->Start;
|
|
|
|
slot->offset=0;
|
|
|
|
slot->Prev=0;
|
|
|
|
slot->TL=slot->DstTL<<SHIFT;
|
|
|
|
|
|
|
|
EG_Calc(ptChip,slot);
|
|
|
|
slot->EG.state=ATTACK;
|
|
|
|
slot->EG.volume=0;
|
|
|
|
|
|
|
|
if(slot->Base>=0x100000)
|
|
|
|
{
|
|
|
|
if(slot->Pan&8)
|
|
|
|
slot->Base=(slot->Base&0xfffff)|(ptChip->BankL);
|
|
|
|
else
|
|
|
|
slot->Base=(slot->Base&0xfffff)|(ptChip->BankR);
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
if(slot->Playing)
|
|
|
|
{
|
|
|
|
if(slot->Sample->RR!=0xf)
|
|
|
|
slot->EG.state=RELEASE;
|
|
|
|
else
|
|
|
|
slot->Playing=0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 5: //TL+Interpolation
|
|
|
|
{
|
|
|
|
slot->DstTL=(data>>1)&0x7f;
|
|
|
|
if(!(data&1)) //Interpolate TL
|
|
|
|
{
|
|
|
|
if((slot->TL>>SHIFT)>slot->DstTL)
|
|
|
|
slot->TLStep=TLSteps[0]; //decrease
|
|
|
|
else
|
|
|
|
slot->TLStep=TLSteps[1]; //increase
|
|
|
|
}
|
|
|
|
else
|
|
|
|
slot->TL=slot->DstTL<<SHIFT;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 6: //LFO freq+PLFO
|
|
|
|
{
|
|
|
|
if(data)
|
|
|
|
{
|
|
|
|
LFO_ComputeStep(ptChip,&(slot->PLFO),(slot->Regs[6]>>3)&7,slot->Regs[6]&7,0);
|
|
|
|
LFO_ComputeStep(ptChip,&(slot->ALFO),(slot->Regs[6]>>3)&7,slot->Regs[7]&7,1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 7: //ALFO
|
|
|
|
{
|
|
|
|
if(data)
|
|
|
|
{
|
|
|
|
LFO_ComputeStep(ptChip,&(slot->PLFO),(slot->Regs[6]>>3)&7,slot->Regs[6]&7,0);
|
|
|
|
LFO_ComputeStep(ptChip,&(slot->ALFO),(slot->Regs[6]>>3)&7,slot->Regs[7]&7,1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
//static STREAM_UPDATE( MultiPCM_update )
|
|
|
|
void MultiPCM_update(void *param, stream_sample_t **outputs, int samples)
|
|
|
|
{
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)param;
|
|
|
|
stream_sample_t *datap[2];
|
|
|
|
int i,sl;
|
|
|
|
|
|
|
|
datap[0] = outputs[0];
|
|
|
|
datap[1] = outputs[1];
|
|
|
|
|
|
|
|
memset(datap[0], 0, sizeof(*datap[0])*samples);
|
|
|
|
memset(datap[1], 0, sizeof(*datap[1])*samples);
|
|
|
|
|
|
|
|
|
|
|
|
for(i=0;i<samples;++i)
|
|
|
|
{
|
|
|
|
signed int smpl=0;
|
|
|
|
signed int smpr=0;
|
|
|
|
for(sl=0;sl<28;++sl)
|
|
|
|
{
|
|
|
|
struct _SLOT *slot=ptChip->Slots+sl;
|
|
|
|
if(slot->Playing && ! slot->Muted)
|
|
|
|
{
|
|
|
|
unsigned int vol=(slot->TL>>SHIFT)|(slot->Pan<<7);
|
|
|
|
unsigned int adr=slot->offset>>SHIFT;
|
|
|
|
signed int sample;
|
|
|
|
unsigned int step=slot->step;
|
|
|
|
signed int csample=(signed short) (ptChip->ROM[(slot->Base+adr) & ptChip->ROMMask]<<8);
|
|
|
|
signed int fpart=slot->offset&((1<<SHIFT)-1);
|
|
|
|
sample=(csample*fpart+slot->Prev*((1<<SHIFT)-fpart))>>SHIFT;
|
|
|
|
|
|
|
|
if(slot->Regs[6]&7) //Vibrato enabled
|
|
|
|
{
|
|
|
|
step=step*PLFO_Step(&(slot->PLFO));
|
|
|
|
step>>=SHIFT;
|
|
|
|
}
|
|
|
|
|
|
|
|
slot->offset+=step;
|
|
|
|
if(slot->offset>=(slot->Sample->End<<SHIFT))
|
|
|
|
{
|
|
|
|
slot->offset=slot->Sample->Loop<<SHIFT;
|
|
|
|
}
|
|
|
|
if(adr^(slot->offset>>SHIFT))
|
|
|
|
{
|
|
|
|
slot->Prev=csample;
|
|
|
|
}
|
|
|
|
|
|
|
|
if((slot->TL>>SHIFT)!=slot->DstTL)
|
|
|
|
slot->TL+=slot->TLStep;
|
|
|
|
|
|
|
|
if(slot->Regs[7]&7) //Tremolo enabled
|
|
|
|
{
|
|
|
|
sample=sample*ALFO_Step(&(slot->ALFO));
|
|
|
|
sample>>=SHIFT;
|
|
|
|
}
|
|
|
|
|
|
|
|
sample=(sample*EG_Update(slot))>>10;
|
|
|
|
|
|
|
|
smpl+=(LPANTABLE[vol]*sample)>>SHIFT;
|
|
|
|
smpr+=(RPANTABLE[vol]*sample)>>SHIFT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*#define ICLIP16(x) (x<-32768)?-32768:((x>32767)?32767:x)
|
|
|
|
datap[0][i]=ICLIP16(smpl);
|
|
|
|
datap[1][i]=ICLIP16(smpr);*/
|
|
|
|
datap[0][i] = smpl;
|
|
|
|
datap[1][i] = smpr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
//READ8_DEVICE_HANDLER( multipcm_r )
|
|
|
|
UINT8 multipcm_r(void *_info, offs_t offset)
|
|
|
|
{
|
|
|
|
// MultiPCM *ptChip = get_safe_token(device);
|
|
|
|
// MultiPCM *ptChip = &MultiPCMData[ChipID];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
//static DEVICE_START( multipcm )
|
|
|
|
int device_start_multipcm(void **_info, int clock)
|
|
|
|
{
|
|
|
|
//MultiPCM *ptChip = get_safe_token(device);
|
|
|
|
MultiPCM *ptChip;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ptChip = (MultiPCM *) calloc(1, sizeof(MultiPCM));
|
|
|
|
*_info = (void *) ptChip;
|
|
|
|
|
|
|
|
//ptChip->ROM=*device->region();
|
|
|
|
ptChip->ROMMask = 0x00;
|
|
|
|
ptChip->ROMSize = 0x00;
|
|
|
|
ptChip->ROM = NULL;
|
|
|
|
//ptChip->Rate=(float) device->clock() / MULTIPCM_CLOCKDIV;
|
|
|
|
ptChip->Rate=(float) clock / MULTIPCM_CLOCKDIV;
|
|
|
|
|
|
|
|
//ptChip->stream = stream_create(device, 0, 2, ptChip->Rate, ptChip, MultiPCM_update);
|
|
|
|
|
|
|
|
if (! IsInit)
|
|
|
|
{
|
|
|
|
//Volume+pan table
|
|
|
|
for(i=0;i<0x800;++i)
|
|
|
|
{
|
|
|
|
float SegaDB=0;
|
|
|
|
float TL;
|
|
|
|
float LPAN,RPAN;
|
|
|
|
|
|
|
|
unsigned char iTL=i&0x7f;
|
|
|
|
unsigned char iPAN=(i>>7)&0xf;
|
|
|
|
|
|
|
|
SegaDB=(float) iTL*(-24.0)/(float) 0x40;
|
|
|
|
|
|
|
|
TL=pow(10.0,SegaDB/20.0);
|
|
|
|
|
|
|
|
|
|
|
|
if(iPAN==0x8)
|
|
|
|
{
|
|
|
|
LPAN=RPAN=0.0;
|
|
|
|
}
|
|
|
|
else if(iPAN==0x0)
|
|
|
|
{
|
|
|
|
LPAN=RPAN=1.0;
|
|
|
|
}
|
|
|
|
else if(iPAN&0x8)
|
|
|
|
{
|
|
|
|
LPAN=1.0;
|
|
|
|
|
|
|
|
iPAN=0x10-iPAN;
|
|
|
|
|
|
|
|
SegaDB=(float) iPAN*(-12.0)/(float) 0x4;
|
|
|
|
|
|
|
|
RPAN=pow(10.0,SegaDB/20.0);
|
|
|
|
|
|
|
|
if((iPAN&0x7)==7)
|
|
|
|
RPAN=0.0;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
RPAN=1.0;
|
|
|
|
|
|
|
|
SegaDB=(float) iPAN*(-12.0)/(float) 0x4;
|
|
|
|
|
|
|
|
LPAN=pow(10.0,SegaDB/20.0);
|
|
|
|
if((iPAN&0x7)==7)
|
|
|
|
LPAN=0.0;
|
|
|
|
}
|
|
|
|
|
|
|
|
TL/=4.0;
|
|
|
|
|
|
|
|
LPANTABLE[i]=FIX((LPAN*TL));
|
|
|
|
RPANTABLE[i]=FIX((RPAN*TL));
|
|
|
|
}
|
|
|
|
IsInit = 0x01;
|
|
|
|
}
|
|
|
|
|
|
|
|
//Pitch steps
|
|
|
|
for(i=0;i<0x400;++i)
|
|
|
|
{
|
|
|
|
float fcent=ptChip->Rate*(1024.0+(float) i)/1024.0;
|
|
|
|
ptChip->FNS_Table[i]=(unsigned int ) ((float) (1<<SHIFT) *fcent);
|
|
|
|
}
|
|
|
|
|
|
|
|
//Envelope steps
|
|
|
|
for(i=0;i<0x40;++i)
|
|
|
|
{
|
|
|
|
//Times are based on 44100 clock, adjust to real chip clock
|
|
|
|
ptChip->ARStep[i]=(float) (0x400<<EG_SHIFT)/(BaseTimes[i]*44100.0/(1000.0));
|
|
|
|
ptChip->DRStep[i]=(float) (0x400<<EG_SHIFT)/(BaseTimes[i]*AR2DR*44100.0/(1000.0));
|
|
|
|
}
|
|
|
|
ptChip->ARStep[0]=ptChip->ARStep[1]=ptChip->ARStep[2]=ptChip->ARStep[3]=0;
|
|
|
|
ptChip->ARStep[0x3f]=0x400<<EG_SHIFT;
|
|
|
|
ptChip->DRStep[0]=ptChip->DRStep[1]=ptChip->DRStep[2]=ptChip->DRStep[3]=0;
|
|
|
|
|
|
|
|
//TL Interpolation steps
|
|
|
|
//lower
|
|
|
|
TLSteps[0]=-(float) (0x80<<SHIFT)/(78.2*44100.0/1000.0);
|
|
|
|
//raise
|
|
|
|
TLSteps[1]=(float) (0x80<<SHIFT)/(78.2*2*44100.0/1000.0);
|
|
|
|
|
|
|
|
//build the linear->exponential ramps
|
|
|
|
for(i=0;i<0x400;++i)
|
|
|
|
{
|
|
|
|
float db=-(96.0-(96.0*(float) i/(float) 0x400));
|
|
|
|
lin2expvol[i]=pow(10.0,db/20.0)*(float) (1<<SHIFT);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*for(i=0;i<512;++i)
|
|
|
|
{
|
|
|
|
UINT8 *ptSample=(UINT8 *) ptChip->ROM+i*12;
|
|
|
|
ptChip->Samples[i].Start=(ptSample[0]<<16)|(ptSample[1]<<8)|(ptSample[2]<<0);
|
|
|
|
ptChip->Samples[i].Loop=(ptSample[3]<<8)|(ptSample[4]<<0);
|
|
|
|
ptChip->Samples[i].End=0xffff-((ptSample[5]<<8)|(ptSample[6]<<0));
|
|
|
|
ptChip->Samples[i].LFOVIB=ptSample[7];
|
|
|
|
ptChip->Samples[i].DR1=ptSample[8]&0xf;
|
|
|
|
ptChip->Samples[i].AR=(ptSample[8]>>4)&0xf;
|
|
|
|
ptChip->Samples[i].DR2=ptSample[9]&0xf;
|
|
|
|
ptChip->Samples[i].DL=(ptSample[9]>>4)&0xf;
|
|
|
|
ptChip->Samples[i].RR=ptSample[10]&0xf;
|
|
|
|
ptChip->Samples[i].KRS=(ptSample[10]>>4)&0xf;
|
|
|
|
ptChip->Samples[i].AM=ptSample[11];
|
|
|
|
}*/
|
|
|
|
|
|
|
|
/*state_save_register_device_item(device, 0, ptChip->CurSlot);
|
|
|
|
state_save_register_device_item(device, 0, ptChip->Address);
|
|
|
|
state_save_register_device_item(device, 0, ptChip->BankL);
|
|
|
|
state_save_register_device_item(device, 0, ptChip->BankR);*/
|
|
|
|
|
|
|
|
// reset is done via DEVICE_RESET
|
|
|
|
/*for(i=0;i<28;++i)
|
|
|
|
{
|
|
|
|
ptChip->Slots[i].Num=i;
|
|
|
|
ptChip->Slots[i].Playing=0;
|
|
|
|
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].Num);
|
|
|
|
state_save_register_device_item_array(device, i, ptChip->Slots[i].Regs);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].Playing);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].Base);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].offset);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].step);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].Pan);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].TL);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].DstTL);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].TLStep);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].Prev);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.volume);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.state);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.step);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.AR);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.D1R);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.D2R);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.RR);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].EG.DL);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].PLFO.phase);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].PLFO.phase_step);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].ALFO.phase);
|
|
|
|
state_save_register_device_item(device, i, ptChip->Slots[i].ALFO.phase_step);
|
|
|
|
}*/
|
|
|
|
|
|
|
|
LFO_Init();
|
|
|
|
|
|
|
|
multipcm_set_bank(ptChip, 0x00, 0x00);
|
|
|
|
|
|
|
|
return (int)(ptChip->Rate + 0.5);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void device_stop_multipcm(void *_info)
|
|
|
|
{
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)_info;
|
|
|
|
|
|
|
|
free(ptChip->ROM); ptChip->ROM = NULL;
|
|
|
|
|
|
|
|
free(ptChip);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
void device_reset_multipcm(void *_info)
|
|
|
|
{
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)_info;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for(i=0;i<28;++i)
|
|
|
|
{
|
|
|
|
ptChip->Slots[i].Num=i;
|
|
|
|
ptChip->Slots[i].Playing=0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
//WRITE8_DEVICE_HANDLER( multipcm_w )
|
|
|
|
void multipcm_w(void *_info, offs_t offset, UINT8 data)
|
|
|
|
{
|
|
|
|
//MultiPCM *ptChip = get_safe_token(device);
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)_info;
|
|
|
|
switch(offset)
|
|
|
|
{
|
|
|
|
case 0: //Data write
|
|
|
|
WriteSlot(ptChip,ptChip->Slots+ptChip->CurSlot,ptChip->Address,data);
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
ptChip->CurSlot=val2chan[data&0x1f];
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
ptChip->Address=(data>7)?7:data;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/*ptChip->CurSlot = val2chan[(offset >> 3) & 0x1F];
|
|
|
|
ptChip->Address = offset & 0x07;
|
|
|
|
WriteSlot(ptChip, ptChip->Slots + ptChip->CurSlot, ptChip->Address, data);*/
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MAME/M1 access functions */
|
|
|
|
|
|
|
|
//void multipcm_set_bank(running_device *device, UINT32 leftoffs, UINT32 rightoffs)
|
|
|
|
void multipcm_set_bank(void *_info, UINT32 leftoffs, UINT32 rightoffs)
|
|
|
|
{
|
|
|
|
//MultiPCM *ptChip = get_safe_token(device);
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)_info;
|
|
|
|
ptChip->BankL = leftoffs;
|
|
|
|
ptChip->BankR = rightoffs;
|
|
|
|
}
|
|
|
|
|
|
|
|
void multipcm_bank_write(void *_info, UINT8 offset, UINT16 data)
|
|
|
|
{
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)_info;
|
|
|
|
|
|
|
|
if (offset & 0x01)
|
|
|
|
ptChip->BankL = data << 16;
|
|
|
|
if (offset & 0x02)
|
|
|
|
ptChip->BankR = data << 16;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
void multipcm_write_rom(void *_info, offs_t ROMSize, offs_t DataStart, offs_t DataLength,
|
|
|
|
const UINT8* ROMData)
|
|
|
|
{
|
|
|
|
MultiPCM *ptChip = (MultiPCM *)_info;
|
|
|
|
UINT16 CurSmpl;
|
|
|
|
struct _Sample* TempSmpl;
|
|
|
|
UINT8* ptSample;
|
|
|
|
|
|
|
|
if (ptChip->ROMSize != ROMSize)
|
|
|
|
{
|
2016-06-30 05:10:29 +00:00
|
|
|
ptChip->ROM = (INT8*)realloc(ptChip->ROM, ROMSize);
|
2015-11-27 10:02:41 +00:00
|
|
|
ptChip->ROMSize = ROMSize;
|
|
|
|
|
|
|
|
for (ptChip->ROMMask = 1; ptChip->ROMMask < ROMSize; ptChip->ROMMask <<= 1)
|
|
|
|
;
|
|
|
|
ptChip->ROMMask --;
|
|
|
|
|
|
|
|
memset(ptChip->ROM, 0xFF, ROMSize);
|
|
|
|
}
|
|
|
|
if (DataStart > ROMSize)
|
|
|
|
return;
|
|
|
|
if (DataStart + DataLength > ROMSize)
|
|
|
|
DataLength = ROMSize - DataStart;
|
|
|
|
|
|
|
|
memcpy(ptChip->ROM + DataStart, ROMData, DataLength);
|
|
|
|
|
|
|
|
if (DataStart < 0x200 * 12)
|
|
|
|
{
|
|
|
|
for (CurSmpl = 0; CurSmpl < 512; CurSmpl ++)
|
|
|
|
{
|
|
|
|
TempSmpl = &ptChip->Samples[CurSmpl];
|
|
|
|
ptSample = (UINT8*)ptChip->ROM + CurSmpl * 12;
|
|
|
|
|
|
|
|
TempSmpl->Start = (ptSample[0]<<16)|(ptSample[1]<<8)|(ptSample[2]<<0);
|
|
|
|
TempSmpl->Loop = (ptSample[3]<<8)|(ptSample[4]<<0);
|
|
|
|
TempSmpl->End = 0xffff-((ptSample[5]<<8)|(ptSample[6]<<0));
|
|
|
|
TempSmpl->LFOVIB = ptSample[7];
|
|
|
|
TempSmpl->DR1 = ptSample[8]&0xf;
|
|
|
|
TempSmpl->AR = (ptSample[8]>>4)&0xf;
|
|
|
|
TempSmpl->DR2 = ptSample[9]&0xf;
|
|
|
|
TempSmpl->DL = (ptSample[9]>>4)&0xf;
|
|
|
|
TempSmpl->RR = ptSample[10]&0xf;
|
|
|
|
TempSmpl->KRS = (ptSample[10]>>4)&0xf;
|
|
|
|
TempSmpl->AM = ptSample[11];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void multipcm_set_mute_mask(void *_info, UINT32 MuteMask)
|
|
|
|
{
|
|
|
|
MultiPCM* ptChip = (MultiPCM *)_info;
|
|
|
|
UINT8 CurChn;
|
|
|
|
|
|
|
|
for (CurChn = 0; CurChn < 28; CurChn ++)
|
|
|
|
ptChip->Slots[CurChn].Muted = (MuteMask >> CurChn) & 0x01;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
#if 0 // for debugging only
|
|
|
|
UINT8 multipcm_get_channels(UINT8 ChipID, UINT32* ChannelMask)
|
|
|
|
{
|
|
|
|
MultiPCM* ptChip = &MultiPCMData[ChipID];
|
|
|
|
UINT8 CurChn;
|
|
|
|
UINT8 UsedChns;
|
|
|
|
UINT32 ChnMask;
|
|
|
|
|
|
|
|
ChnMask = 0x00000000;
|
|
|
|
UsedChns = 0x00;
|
|
|
|
for (CurChn = 0; CurChn < 28; CurChn ++)
|
|
|
|
{
|
|
|
|
if (ptChip->Slots[CurChn].Playing)
|
|
|
|
{
|
|
|
|
ChnMask |= (1 << CurChn);
|
|
|
|
UsedChns ++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (ChannelMask != NULL)
|
|
|
|
*ChannelMask = ChnMask;
|
|
|
|
|
|
|
|
return UsedChns;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
|
|
* Generic get_info
|
|
|
|
**************************************************************************/
|
|
|
|
|
|
|
|
/*DEVICE_GET_INFO( multipcm )
|
|
|
|
{
|
|
|
|
switch (state)
|
|
|
|
{
|
|
|
|
// --- the following bits of info are returned as 64-bit signed integers ---
|
|
|
|
case DEVINFO_INT_TOKEN_BYTES: info->i = sizeof(MultiPCM); break;
|
|
|
|
|
|
|
|
// --- the following bits of info are returned as pointers to data or functions ---
|
|
|
|
case DEVINFO_FCT_START: info->start = DEVICE_START_NAME( multipcm ); break;
|
|
|
|
case DEVINFO_FCT_STOP: // Nothing break;
|
|
|
|
case DEVINFO_FCT_RESET: // Nothing break;
|
|
|
|
|
|
|
|
// --- the following bits of info are returned as NULL-terminated strings ---
|
|
|
|
case DEVINFO_STR_NAME: strcpy(info->s, "Sega/Yamaha 315-5560"); break;
|
|
|
|
case DEVINFO_STR_FAMILY: strcpy(info->s, "Sega custom"); break;
|
|
|
|
case DEVINFO_STR_VERSION: strcpy(info->s, "2.0"); break;
|
|
|
|
case DEVINFO_STR_SOURCE_FILE: strcpy(info->s, __FILE__); break;
|
|
|
|
case DEVINFO_STR_CREDITS: strcpy(info->s, "Copyright Nicola Salmoria and the MAME Team"); break;
|
|
|
|
}
|
|
|
|
}*/
|
|
|
|
|
|
|
|
|
|
|
|
//DEFINE_LEGACY_SOUND_DEVICE(MULTIPCM, multipcm);
|