95 lines
3.4 KiB
C
95 lines
3.4 KiB
C
#pragma once
|
|
|
|
#ifndef __YMDELTAT_H__
|
|
#define __YMDELTAT_H__
|
|
|
|
#include "mamedef.h"
|
|
|
|
#define YM_DELTAT_SHIFT (16)
|
|
|
|
#define YM_DELTAT_EMULATION_MODE_NORMAL 0
|
|
#define YM_DELTAT_EMULATION_MODE_YM2610 1
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
|
|
typedef void (*STATUS_CHANGE_HANDLER)(void *chip, UINT8 status_bits);
|
|
|
|
|
|
/* DELTA-T (adpcm type B) struct */
|
|
typedef struct deltat_adpcm_state { /* AT: rearranged and tigntened structure */
|
|
UINT8 *memory;
|
|
INT32 *output_pointer;/* pointer of output pointers */
|
|
INT32 *pan; /* pan : &output_pointer[pan] */
|
|
double freqbase;
|
|
#if 0
|
|
double write_time; /* Y8950: 10 cycles of main clock; YM2608: 20 cycles of main clock */
|
|
double read_time; /* Y8950: 8 cycles of main clock; YM2608: 18 cycles of main clock */
|
|
#endif
|
|
UINT32 memory_size;
|
|
int output_range;
|
|
UINT32 now_addr; /* current address */
|
|
UINT32 now_step; /* currect step */
|
|
UINT32 step; /* step */
|
|
UINT32 start; /* start address */
|
|
UINT32 limit; /* limit address */
|
|
UINT32 end; /* end address */
|
|
UINT32 delta; /* delta scale */
|
|
INT32 volume; /* current volume */
|
|
INT32 acc; /* shift Measurement value*/
|
|
INT32 adpcmd; /* next Forecast */
|
|
INT32 adpcml; /* current value */
|
|
INT32 prev_acc; /* leveling value */
|
|
UINT8 now_data; /* current rom data */
|
|
UINT8 CPU_data; /* current data from reg 08 */
|
|
UINT8 portstate; /* port status */
|
|
UINT8 control2; /* control reg: SAMPLE, DA/AD, RAM TYPE (x8bit / x1bit), ROM/RAM */
|
|
UINT8 portshift; /* address bits shift-left:
|
|
** 8 for YM2610,
|
|
** 5 for Y8950 and YM2608 */
|
|
|
|
UINT8 DRAMportshift; /* address bits shift-right:
|
|
** 0 for ROM and x8bit DRAMs,
|
|
** 3 for x1 DRAMs */
|
|
|
|
UINT8 memread; /* needed for reading/writing external memory */
|
|
|
|
/* handlers and parameters for the status flags support */
|
|
STATUS_CHANGE_HANDLER status_set_handler;
|
|
STATUS_CHANGE_HANDLER status_reset_handler;
|
|
|
|
/* note that different chips have these flags on different
|
|
** bits of the status register
|
|
*/
|
|
void * status_change_which_chip; /* this chip id */
|
|
UINT8 status_change_EOS_bit; /* 1 on End Of Sample (record/playback/cycle time of AD/DA converting has passed)*/
|
|
UINT8 status_change_BRDY_bit; /* 1 after recording 2 datas (2x4bits) or after reading/writing 1 data */
|
|
UINT8 status_change_ZERO_bit; /* 1 if silence lasts for more than 290 miliseconds on ADPCM recording */
|
|
|
|
/* neither Y8950 nor YM2608 can generate IRQ when PCMBSY bit changes, so instead of above,
|
|
** the statusflag gets ORed with PCM_BSY (below) (on each read of statusflag of Y8950 and YM2608)
|
|
*/
|
|
UINT8 PCM_BSY; /* 1 when ADPCM is playing; Y8950/YM2608 only */
|
|
|
|
UINT8 reg[16]; /* adpcm registers */
|
|
UINT8 emulation_mode; /* which chip we're emulating */
|
|
}YM_DELTAT;
|
|
|
|
/*void YM_DELTAT_BRDY_callback(YM_DELTAT *DELTAT);*/
|
|
|
|
UINT8 YM_DELTAT_ADPCM_Read(YM_DELTAT *DELTAT);
|
|
void YM_DELTAT_ADPCM_Write(YM_DELTAT *DELTAT,int r,int v);
|
|
void YM_DELTAT_ADPCM_Reset(YM_DELTAT *DELTAT,int pan,int emulation_mode);
|
|
void YM_DELTAT_ADPCM_CALC(YM_DELTAT *DELTAT);
|
|
|
|
/*void YM_DELTAT_postload(YM_DELTAT *DELTAT,UINT8 *regs);
|
|
void YM_DELTAT_savestate(const device_config *device,YM_DELTAT *DELTAT);*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __YMDELTAT_H__ */
|