128 lines
5.5 KiB
Markdown
128 lines
5.5 KiB
Markdown
|
---
|
||
|
|
title: HP EliteBook 2170p
|
||
|
|
x-toc-enable: true
|
||
|
|
...
|
||
|
|
|
||
|
|
**[PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING](../../news/safety.md),
|
||
|
|
OR YOU MIGHT BRICK YOUR MACHINE: [SAFETY PRECAUTIONS](../../news/safety.md)**
|
||
|
|
|
||
|
|
<div class="specs">
|
||
|
|
<center>
|
||
|
|
<img tabindex=1 alt="HP EliteBook 2170p" class="p" src="https://av.libreboot.org/hp2170p/hp2170p.jpg" /><span class="f"><img src="https://av.libreboot.org/hp2170p/hp2170p.jpg" /></span>
|
||
|
|
</center>
|
||
|
|
|
||
|
|
| ***Specifications*** | |
|
||
|
|
|----------------------------|------------------------------------------------|
|
||
|
|
| **Manufacturer** | HP |
|
||
|
|
| **Name** | EliteBook 2170p |
|
||
|
|
| **Variants** | EliteBook 2170p |
|
||
|
|
| **Released** | 2012 |
|
||
|
|
| **Chipset** | Intel QM77 |
|
||
|
|
| **CPU** | Intel Ivy Bridge ULV |
|
||
|
|
| **Graphics** | Intel HD Graphics 4000 |
|
||
|
|
| **Display** | 1366x768 11.6" TFT |
|
||
|
|
| **Memory** | Two slots, max 8GB/slot (2x1GB), DDR3/sodimm |
|
||
|
|
| **Architecture** | x86_64 |
|
||
|
|
| **EC** | SMSC KBC1126, proprietary (in main boot flash) |
|
||
|
|
| **Original boot firmware** | HP UEFI firmware |
|
||
|
|
| **Intel ME/AMD PSP** | Present. Can be disabled with me_cleaner. |
|
||
|
|
| **Flash chip** | SOIC-8 16MiB (128Mbit), in a socket |
|
||
|
|
|
||
|
|
|
||
|
|
```
|
||
|
|
W+: Works without blobs;
|
||
|
|
N: Doesn't work;
|
||
|
|
W*: Works with blobs;
|
||
|
|
U: Untested;
|
||
|
|
P+: Partially works;
|
||
|
|
P*: Partially works with blobs
|
||
|
|
```
|
||
|
|
|
||
|
|
| ***Features*** | |
|
||
|
|
|---------------------------------------------------|----|
|
||
|
|
| **Internal flashing with original boot firmware** | N |
|
||
|
|
| **Display (if Intel GPU)** | W+ |
|
||
|
|
| **Audio** | W+ |
|
||
|
|
| **RAM Init** | W+ |
|
||
|
|
| **External output** | W+ |
|
||
|
|
| **Display brightness** | W+ |
|
||
|
|
|
||
|
|
| ***Payloads supported*** | |
|
||
|
|
|---------------------------|-----------|
|
||
|
|
| **GRUB** | Works |
|
||
|
|
| **SeaBIOS** | Works |
|
||
|
|
| **SeaBIOS with GRUB** | Works |
|
||
|
|
</div>
|
||
|
|
Introduction
|
||
|
|
============
|
||
|
|
|
||
|
|
This is a portable, 11.6" Ivy Bridge platform from HP.
|
||
|
|
|
||
|
|
**Unavailable in Libreboot 20230625 or earlier. You must [compile from
|
||
|
|
source](../build/), or use the next release after Libreboot 20230625.**
|
||
|
|
|
||
|
|
Build ROM image from source
|
||
|
|
---------------------------
|
||
|
|
|
||
|
|
The build target, when building from source, is thus:
|
||
|
|
|
||
|
|
./build boot roms hp2170p_16mb
|
||
|
|
|
||
|
|
Installation
|
||
|
|
============
|
||
|
|
|
||
|
|
Insert binary files
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
If you're using a release ROM, please ensure that you've inserted extra firmware
|
||
|
|
required refer to the [guide](../install/ivy_has_common.md) for that. (failure
|
||
|
|
to adhere to this advice will result in a bricked machine)
|
||
|
|
|
||
|
|
Set MAC address
|
||
|
|
---------------
|
||
|
|
|
||
|
|
This platform uses an Intel Flash Descriptor, and defines an Intel GbE NVM
|
||
|
|
region. As such, release/build ROMs will contain the same MAC address. To
|
||
|
|
change the MAC address, please read [nvmutil documentation](../install/nvmutil.md).
|
||
|
|
|
||
|
|
Flash a ROM image (software)
|
||
|
|
-----------------
|
||
|
|
|
||
|
|
If you're already running Libreboot, and you don't have flash protection
|
||
|
|
turned on, [internal flashing](../install/) is possible.
|
||
|
|
|
||
|
|
Flash a ROM image (hardware)
|
||
|
|
-----------------
|
||
|
|
|
||
|
|
**REMOVE all power sources like battery, charger and so on, before doing this.
|
||
|
|
This is to prevent short circuiting and power surges while flashing; although
|
||
|
|
the flash is socketed, hot-swapping is generally a bad practise and must be
|
||
|
|
avoided.**
|
||
|
|
|
||
|
|
Otherwise, external flashing is simple, but *quite different* from most
|
||
|
|
laptops! The flash is a SOIC8 IC like you'd expect, but it's *in a socket*.
|
||
|
|
|
||
|
|
Remove those two screws and cover on the underside, and then the flash is in
|
||
|
|
this socket which you can open:
|
||
|
|
|
||
|
|
<img tabindex=1 class="l" src="https://av.libreboot.org/hp2170p/hp2170p_cover.jpg" /><span class="f"><img src="https://av.libreboot.org/hp2170p/hp2170p_cover.jpg" /></span>
|
||
|
|
<img tabindex=1 class="l" src="https://av.libreboot.org/hp2170p/hp2170p_socket.jpg" /><span class="f"><img src="https://av.libreboot.org/hp2170p/hp2170p_socket.jpg" /></span>
|
||
|
|
|
||
|
|
For general information, please refer to [25xx NOR flash
|
||
|
|
instructions](../install/spi.md) - that page refers to use of socketed flash.
|
||
|
|
|
||
|
|
For this board, you can use a Raspberry Pi or similar flasher if you wish, wired
|
||
|
|
to a spring socket adapter (SOP to DIP adapter) in a breadboard. In my case, I
|
||
|
|
opted for use of a 3.3v-modded CH341A device.
|
||
|
|
|
||
|
|
<img tabindex=1 class="l" style="clear:left;" src="https://av.libreboot.org/hp2170p/ch341a_socket_soic8.jpg" /><span class="f"><img src="https://av.libreboot.org/hp2170p/ch341a_socket_soic8.jpg" /></span>
|
||
|
|
|
||
|
|
Here, the flash is inserted into the SOP to DIP adapter, which is then put into
|
||
|
|
the ZIF socket on the CH341a device. This is the black version which has 5V
|
||
|
|
logic levels, but it can (read: MUST) be modified for correct 3.3v logic levels.
|
||
|
|
The [main 25xx flashing guide](../install/spi.md) documents this; some other
|
||
|
|
models may already be 3.3v, or have switchable logic levels like on some newer
|
||
|
|
revisions of CH341A. Please ensure that you run it at the correct voltage.
|
||
|
|
|
||
|
|
|