lbwww/site/news/e6400nvidia.md

% Experimental Nvidia GPU support on Dell Latitude E6400 variants, plus E6400 XFR support now confirmed
% Leah Rowe
% 9 May 2023

**Update: Nvidia GPU variants of Latitude E6400 are, as of 11 September 2023,
fully supported in the `master` branch of lbmk (Libreboot build system);
however, the same `e6400_4mb` target shall provide for both variants. In
releases, the necessary VGA ROM is absent but can be added using the `inject`
command documented [here](../docs/install/ivy_has_common.md) - or you can just
build lbmk from source, and it gets inserted automatically via download. The
same ROM, if it contains the Nvidia VGA ROM, supports both variants; if the VGA
ROM is missing, then only the Intel GPU variant is supported. The same ROM
will work on both variants, provided for by Libreboot patching the devicetree
in coreboot, on this mainboard.**

<img tabindex=1 class="r" style="max-width:35%" src="https://av.libreboot.org/e6400/e6400xfr-seabios.jpg" /><span class="f"><img src="https://av.libreboot.org/e6400/e6400xfr-seabios.jpg" /></span>

Introduction
============

[Dell Latitude E6400 *with Intel GMA 4500MHD* graphics](e6400.md) was added, and
included in Libreboot release 20230423 or newer. *Today*, [experimental
support](https://browse.libreboot.org/lbmk.git/log/?h=e6400nvidia_wip) is now
available for variants with GPU: Nvidia Quadro NVS 160M. The Dell Latitude 6400
XFR (rugged variant) was also tested today (Intel graphics) and confirmed
working in Libreboot as of release 20230423.

**UPDATE 21 October 2023: The Nvidia GPU variant is supported
in [Libreboot 20231021](libreboot20231021.md) and newer - versions older
than Libreboot 20231021 only support the Intel GPU variant.**

The 6400 XFR testing+photo was provided, courtesy Mark Cornick (`mcornick` on
Libreboot IRC).

Dell Latitude E6400 with Nvidia GPU
===================================

This section *also* applies to E6400 XFS and ATG models. [Testers are
needed!](../docs/maintain/testing.md).

*Some* models of Dell Latitude E6400 have Nvidia Quadro NVS 160M graphics
device, instead of Intel GMA 4500MHD. The *initial* Libreboot port of Dell
E6400 *only* supported models with Intel graphics, but experimental support
for Nvidia graphics now exists, in a WIP branch of Libreboot.

<img tabindex=1 class="l" style="max-width:25%" src="https://av.libreboot.org/e6400/e6400-seabios.jpg" /><span class="f"><img src="https://av.libreboot.org/e6400/e6400-seabios.jpg" /></span>

The Libreboot documentation has been updated, to cover these models. Refer
to Dell Latitude E6400 documentation in Libreboot; specifically,
the [E6400 info page](../docs/hardware/e6400.md) and [E6400 flashing
guide](../docs/install/e6400.md).

Ongoing development discussion is available, on the Libreboot bug tracker. See:

* <https://codeberg.org/libreboot/lbmk/issues/14>

For more information about the *Nvidia GPU* variants, please review the
following pages (which have been updated, while publishing this news article):

* [Dell Latitude E6400 hardware information](../docs/hardware/e6400.md)
* [Dell Latitude E6400 flashing instructions](../docs/install/e6400.md)

Nouveau(in Linux) currently broken
----------------------------------

Nouveau is the libre driver in Linux, for Nvidia graphics. Nvidia themselves
do not provide binary drivers anymore, for these GPUs. It crashes in Linux,
when you try to start Xorg (Wayland is untested).

If you're booting an Nvidia variant in Linux, boot Linux with
the `nomodeset` kernel option at boot time. This means that graphics are
rendered in software.

Development discussion, for Nvidia variants of E6400, is available here:

<https://codeberg.org/libreboot/lbmk/issues/14>

OpenBSD's Nvidia driver works perfectly
---------------------------------------

OpenBSD 7.3 was tested, on my Nvidia-model E6400, and Xorg works OK with
the `nv` driver.

<img tabindex=1 class="l" style="max-width:35%" src="https://av.libreboot.org/openbsd.jpg" /><span class="f"><img src="https://av.libreboot.org/openbsd.jpg" /></span>

See: <https://www.openbsd.org/>

OpenBSD is a complete free 4.4BSD Unix operating system focused on portability,
security and *code correctness*. It's quite useable for most day to day tasks.

You can find information in Libreboot about BSD operating systems on the
main guide:

* [BSD Operating Systems](../docs/bsd/)

FreeBSD and newer Linux (e.g. Archlinux) untested!
--------------------------------------------------

[Testers needed! Please get in touch!](../docs/maintain/testing.html)

**At the time of writing this post, FreeBSD
and newer Linux have not yet been tested** (I plan to test *Arch Linux*), but
the older Linux/Mesa version in Debian 11.6 works just fine in the Dell BIOS,
and I've confirmed that it uses the exact same Video BIOS Option ROM.

Dell Latitude E6400 ATG model
-----------------------------

[Testers needed! Please get in touch!](../docs/maintain/testing.html)

We also found out about this model; it's another rugged design, assumed to
be the same board as regular E6400, but testing is needed. If it's anything to
go by, this model shares the same service manual as the regular E6400. If you
have this board, please [get in touch](../docs/maintain/testing.md)!

ATG is basically just a thicker chassis. It seems to use the same/similar
heatsink compared to E6400 XFR.

Were you expecting more?

Well, that's all for now.

Stay tuned for further development.