diff --git a/site/docs/install/index.md b/site/docs/install/index.md index 51b5a97..0a087c2 100644 --- a/site/docs/install/index.md +++ b/site/docs/install/index.md @@ -126,7 +126,7 @@ an option in the boot menu. ROM images that have `seabios_withgrub` in the file name start with SeaBIOS first, but also have GRUB available in the boot menu when you press ESC. -### seabios\_grubfirst (DEFUNCT, WAS INTENDED ONLY FOR DESKTOPS) +### seabios\_grubfirst (DEFUNCT) **DEFUNCT** @@ -168,18 +168,17 @@ Which systems are supported? [Refer to the hardware compatibility page](../hardware/) Sandy/Ivybridge/Haswell MAC address (e.g. X230, X220, T440p, W541, hp8200sff) +Intel GbE MAC address (IFD-based systems) ===================================================================== You can change the MAC address in flash, on these machines. See: [nvmutil documentation](nvmutil.md) -MAC address on GM45+ICH9M hardware (ThinkPad X200/R400/T400/T500/W500) -====================================================================== - The MAC address is stored in a region of the boot flashed called *GbE NVM* which is short for *gigabit ethernet non-volatile memory*. Refer to the following article: +For GM45/ICH9M systems (e.g. ThinkPad X200/T400, Dell Latitude E6400), see: [ich9utils documentation](ich9utils.md) (you can also use nvmutil, see link above) @@ -235,7 +234,7 @@ Use this to find out: In the output will be information pertaining to your boot flash. -### Howto: read/write/erase the boot flash (PLEASE CHECK LIST OF EXCEPTIONS BELOW BEFORE YOU ATTEMPT THIS!!!!) +### Howto: read/write/erase the boot flash How to read the current chip contents: @@ -280,7 +279,7 @@ the sections below: See: [Dell Latitute E6400 Libreboot Installation Guide](e6400.md) -#### Lenovo ThinkPad X200/X200S/X200T/T400/T400S/T500/W500/R400/R500 running non-free Lenovo BIOS +#### ThinkPad X200/T400/T500/W500/R400/R500 vendor BIOS If you're running one of these, it cannot be flashed internally if you're still running the non-free Lenovo BIOS firmware.