From 3f8b62dc03693a7084458a46df1bf6d64902cb39 Mon Sep 17 00:00:00 2001 From: Leah Rowe Date: Mon, 7 Oct 2024 13:46:51 +0100 Subject: [PATCH] typo (10ohms. not 100) it's a 1A fan, so about 10ohms should do it (about 3.5v output) Signed-off-by: Leah Rowe --- site/docs/install/dell3050.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/site/docs/install/dell3050.md b/site/docs/install/dell3050.md index 8ab279e..2014bca 100644 --- a/site/docs/install/dell3050.md +++ b/site/docs/install/dell3050.md @@ -94,7 +94,7 @@ Issues, as per Libreboot's testing, are as follows: under stress conditions, which could lead to overheating under stress. To mitigate the PWM bug, simply cut the blue wire on the fan connector, and -cut the red wire but jump the cut (on red) with a 100ohm resistor or so; cutting +cut the red wire but jump the cut (on red) with a 10ohm resistor or so; cutting the blue one bypasses PWM, so the fan runs at full speed (very loud), and the red wire powers it, so the resistor on the red wire will slow the fan down, but leave it running fastr than on idle. You can also cap the CPU speed however you