diff --git a/site/docs/hardware/dell9020.md b/site/docs/hardware/dell9020.md index 1912cd0..3fe6dcf 100644 --- a/site/docs/hardware/dell9020.md +++ b/site/docs/hardware/dell9020.md @@ -110,36 +110,6 @@ This platform uses an Intel Flash Descriptor, and defines an Intel GbE NVM region. As such, release/build ROMs will contain the same MAC address. To change the MAC address, please read [nvmutil documentation](../install/nvmutil.md). -WARNING about CPU/GPU compatibility -------------------------------- - -**NOTE: Graphics cards did not work when last tested; the rendering and output -is still handled by the intel graphics. Until this changes, you can only use -the onboard Intel graphics reliably, on these boards.** - however, if you then -set a mode in xrandr, with a monitor plugged into the graphics card, you can -get a framebuffer off it and use that. Useful if you want to run more monitors. -However, it is recommended for now that you stick to Intel graphics only. - -If you want to use onboard graphics, you must have a CPU that has a GPU built -into it. You can find a list here: - - (**must be LGA 1150 socket**) - -Because of this, Libreboot currently only provides ROM images where SeaBIOS -is the first payload, and SeaBIOS is relied upon the execute the VGA ROM that's -stored on the graphics card. However, coreboot's libgfxinit is also enabled, -so onboard graphics *should* work if you don't have a graphics card installed. - -Coreboot has libre initialisation code for Intel graphics, but libre -initialisation code is not available for most graphics cards. This machine can -take any graphics card that fits in the PCI-E slot. - -GRUB *also* works, from SeaBIOS when the machine is booted in text mode. Both -coreboot GRUB, and BIOS GRUB provided by your (Linux) distro. It's done this -way (SeaBIOS first) because Libreboot's configuration does not tell *coreboot* -to execute VGA Option ROMs, and it's important that we try to prevent bricks -whenever possible. - Flash a ROM image (software) -----------------