Merge pull request 'Document hp8560w' (#106) from Riku_V/lbwww:hp8560w into master
Reviewed-on: https://codeberg.org/libreboot/lbwww/pulls/106master
Leah Rowe
commit
4c4fe77213
|
|
@ -0,0 +1,114 @@
|
|||
---
|
||||
title: HP EliteBook 8560w
|
||||
x-toc-enable: true
|
||||
...
|
||||
|
||||
**[PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING](../../news/safety.md),
|
||||
OR YOU MIGHT BRICK YOUR MACHINE: [SAFETY PRECAUTIONS](../../news/safety.md)**
|
||||
|
||||
<div class="specs">
|
||||
<center>
|
||||
HP EliteBook 8560w
|
||||
</center>
|
||||
|
||||
| ***Specifications*** | |
|
||||
|----------------------------|------------------------------------------------|
|
||||
| **Manufacturer** | HP |
|
||||
| **Name** | EliteBook 8560w |
|
||||
| **Variants** | EliteBook 8560w |
|
||||
| **Released** | 2011 |
|
||||
| **Chipset** | Intel QM67 |
|
||||
| **CPU** | Intel Sandy Bridge (socketed) |
|
||||
| **Graphics** | MXM-A (3.0), socketed |
|
||||
| **Display** | 15" 1600x900 or 1920x1080 TFT |
|
||||
| **Memory** | Two or four slots, max 8GB/slot
|
||||
(16GB or 32GB), DDR3/SODIMM |
|
||||
| **Architecture** | x86_64 |
|
||||
| **EC** | SMSC KBC1126, proprietary (in main boot flash) |
|
||||
| **Original boot firmware** | HP UEFI firmware |
|
||||
| **Intel ME/AMD PSP** | Present. Can be disabled with me_cleaner. |
|
||||
| **Flash chip** | SOIC-8 8MiB (64Mbit) |
|
||||
|
||||
|
||||
```
|
||||
W+: Works without blobs;
|
||||
N: Doesn't work;
|
||||
W*: Works with blobs;
|
||||
U: Untested;
|
||||
P+: Partially works;
|
||||
P*: Partially works with blobs
|
||||
```
|
||||
|
||||
| ***Features*** | |
|
||||
|---------------------------------------------------|----|
|
||||
| **Internal flashing with original boot firmware** | N |
|
||||
| **Display** | W* |
|
||||
| **Audio** | W+ |
|
||||
| **RAM Init** | W+ |
|
||||
| **External output** | W+ |
|
||||
| **Display brightness** | W+ |
|
||||
|
||||
| ***Payloads supported*** | |
|
||||
|---------------------------|-----------|
|
||||
| **GRUB** | Works |
|
||||
| **SeaBIOS** | Works |
|
||||
| **SeaBIOS with GRUB** | Works |
|
||||
</div>
|
||||
Introduction
|
||||
============
|
||||
|
||||
**Unavailable in Libreboot 20240126 or earlier. You must [compile from
|
||||
source](../build/), or use a release newer than 20240126.**
|
||||
|
||||
This is a beastly 15" Sandy Bridge platform from HP. It has upgradeable
|
||||
graphics in the MXM-A 3.0. Only the Quadro 2000M that shipped with some
|
||||
of these laptops is tested with Libreboot so far. 1000M is expected to
|
||||
work as well. The very newest modules might not work, because the internal
|
||||
panel is an LVDS one. Newest GPUs supposedly only support eDP panels.
|
||||
|
||||
Build ROM image from source
|
||||
---------------------------
|
||||
|
||||
The build target, when building from source, is thus:
|
||||
|
||||
./build roms hp8560w_8mb
|
||||
|
||||
Installation
|
||||
============
|
||||
|
||||
Insert binary files
|
||||
-------------------
|
||||
|
||||
If you're using a release ROM, please ensure that you've inserted extra firmware
|
||||
required refer to the [guide](../install/ivy_has_common.md) for that. (failure
|
||||
to adhere to this advice will result in a bricked machine)
|
||||
|
||||
Set MAC address
|
||||
---------------
|
||||
|
||||
This platform uses an Intel Flash Descriptor, and defines an Intel GbE NVM
|
||||
region. As such, release/build ROMs will contain the same MAC address. To
|
||||
change the MAC address, please read [nvmutil documentation](../install/nvmutil.md).
|
||||
|
||||
Flash a ROM image (software)
|
||||
-----------------
|
||||
|
||||
If you're already running Libreboot, and you don't have flash protection
|
||||
turned on, [internal flashing](../install/) is possible.
|
||||
|
||||
Flash a ROM image (hardware)
|
||||
-----------------
|
||||
|
||||
**REMOVE all power sources like battery, charger and so on, before doing this.
|
||||
This is to prevent short circuiting and power surges while flashing.**
|
||||
|
||||
For general information, please refer to [25xx NOR flash
|
||||
instructions](../install/spi.md).
|
||||
|
||||
At this present time, disassembly instructions are unavailable from the
|
||||
Libreboot project, but you can search for HP's own hardware maintenance manual
|
||||
or look at videos online showing disassembly.
|
||||
|
||||
Remove the bottom cover. The SOIC-8 flash chip is next to the memory slot 2.
|
||||
You need to cut away a small piece of the clear plastic protection material
|
||||
to get to the chip.
|
||||
Loading…
Reference in New Issue