diff --git a/site/docs/hardware/hp8560w.md b/site/docs/hardware/hp8560w.md
new file mode 100644
index 0000000..6638f09
--- /dev/null
+++ b/site/docs/hardware/hp8560w.md
@@ -0,0 +1,114 @@
+---
+title: HP EliteBook 8560w
+x-toc-enable: true
+...
+
+**[PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING](../../news/safety.md),
+OR YOU MIGHT BRICK YOUR MACHINE: [SAFETY PRECAUTIONS](../../news/safety.md)**
+
+
+
+HP EliteBook 8560w
+
+
+| ***Specifications*** | |
+|----------------------------|------------------------------------------------|
+| **Manufacturer** | HP |
+| **Name** | EliteBook 8560w |
+| **Variants** | EliteBook 8560w |
+| **Released** | 2011 |
+| **Chipset** | Intel QM67 |
+| **CPU** | Intel Sandy Bridge (socketed) |
+| **Graphics** | MXM-A (3.0), socketed |
+| **Display** | 15" 1600x900 or 1920x1080 TFT |
+| **Memory** | Two or four slots, max 8GB/slot
+ (16GB or 32GB), DDR3/SODIMM |
+| **Architecture** | x86_64 |
+| **EC** | SMSC KBC1126, proprietary (in main boot flash) |
+| **Original boot firmware** | HP UEFI firmware |
+| **Intel ME/AMD PSP** | Present. Can be disabled with me_cleaner. |
+| **Flash chip** | SOIC-8 8MiB (64Mbit) |
+
+
+```
+W+: Works without blobs;
+N: Doesn't work;
+W*: Works with blobs;
+U: Untested;
+P+: Partially works;
+P*: Partially works with blobs
+```
+
+| ***Features*** | |
+|---------------------------------------------------|----|
+| **Internal flashing with original boot firmware** | N |
+| **Display** | W* |
+| **Audio** | W+ |
+| **RAM Init** | W+ |
+| **External output** | W+ |
+| **Display brightness** | W+ |
+
+| ***Payloads supported*** | |
+|---------------------------|-----------|
+| **GRUB** | Works |
+| **SeaBIOS** | Works |
+| **SeaBIOS with GRUB** | Works |
+
+Introduction
+============
+
+**Unavailable in Libreboot 20240126 or earlier. You must [compile from
+source](../build/), or use a release newer than 20240126.**
+
+This is a beastly 15" Sandy Bridge platform from HP. It has upgradeable
+graphics in the MXM-A 3.0. Only the Quadro 2000M that shipped with some
+of these laptops is tested with Libreboot so far. 1000M is expected to
+work as well. The very newest modules might not work, because the internal
+panel is an LVDS one. Newest GPUs supposedly only support eDP panels.
+
+Build ROM image from source
+---------------------------
+
+The build target, when building from source, is thus:
+
+ ./build roms hp8560w_8mb
+
+Installation
+============
+
+Insert binary files
+-------------------
+
+If you're using a release ROM, please ensure that you've inserted extra firmware
+required refer to the [guide](../install/ivy_has_common.md) for that. (failure
+to adhere to this advice will result in a bricked machine)
+
+Set MAC address
+---------------
+
+This platform uses an Intel Flash Descriptor, and defines an Intel GbE NVM
+region. As such, release/build ROMs will contain the same MAC address. To
+change the MAC address, please read [nvmutil documentation](../install/nvmutil.md).
+
+Flash a ROM image (software)
+-----------------
+
+If you're already running Libreboot, and you don't have flash protection
+turned on, [internal flashing](../install/) is possible.
+
+Flash a ROM image (hardware)
+-----------------
+
+**REMOVE all power sources like battery, charger and so on, before doing this.
+This is to prevent short circuiting and power surges while flashing.**
+
+For general information, please refer to [25xx NOR flash
+instructions](../install/spi.md).
+
+At this present time, disassembly instructions are unavailable from the
+Libreboot project, but you can search for HP's own hardware maintenance manual
+or look at videos online showing disassembly.
+
+Remove the bottom cover. The SOIC-8 flash chip is next to the memory slot 2.
+You need to cut away a small piece of the clear plastic protection material
+to get to the chip.