more corrections on the 3050 page

Signed-off-by: Leah Rowe <info@minifree.org>
master
Leah Rowe 2024-10-07 15:33:08 +01:00
parent 3f8b62dc03
commit b9194e9966
1 changed files with 5 additions and 2 deletions

View File

@ -97,11 +97,14 @@ To mitigate the PWM bug, simply cut the blue wire on the fan connector, and
cut the red wire but jump the cut (on red) with a 10ohm resistor or so; cutting
the blue one bypasses PWM, so the fan runs at full speed (very loud), and the
red wire powers it, so the resistor on the red wire will slow the fan down, but
leave it running fastr than on idle. You can also cap the CPU speed however you
leave it running faster than on idle. You can also cap the CPU speed however you
wish, via the `intel_pstate` driver.
If you're using a 10ohm resistor on the fan power, make sure it's at least a 2W
one.
Note that HDMI audio *does* work, but you have to select it in your audio
server e.g. pipework. The `pavucontrol` utility in Linux (with pipewire) lets
server e.g. pipewire. The `pavucontrol` utility in Linux (with pipewire) lets
you have a lot of control over audio I/O. Libreboot patches the board to add
a verb, so headphones should work.