51c06dcae2
docs/install/spi: note about wson8 probes
...
Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-06 22:39:54 +00:00
e0da53e540
update support info
...
Signed-off-by: Leah Rowe <info@minifree.org>
2024-02-20 07:45:17 +00:00
bedc002098
docs/install/spi: note about sck/clk
...
Signed-off-by: Leah Rowe <info@minifree.org>
2024-02-18 15:14:47 +00:00
f0deab660b
fix bad link
...
Signed-off-by: Leah Rowe <info@minifree.org>
2024-01-31 15:04:53 +00:00
4542dbad5e
don't document flashrom. use flashprog instead.
...
Signed-off-by: Leah Rowe <info@minifree.org>
2024-01-27 22:35:38 +00:00
49fdc28d09
docs/install/spi: fix pin order in diagram
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-26 21:43:45 +00:00
57915c2cfb
docs/install/spi: fix wrong SOIC16 HOLD pin number
...
it's pin 1, not 3
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-26 17:55:57 +00:00
cd570a5323
clarify where serprog src can be found
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-03 21:31:53 +00:00
bc17953e23
update docs based on recent lbmk changes
...
the commands changed again
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20 06:07:57 +01:00
67294ab056
more stragglers
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10 21:46:44 +01:00
a918978371
more stragglers
...
a big cleanup was needed, based on recent changes
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10 21:39:28 +01:00
f9f3171e0f
update user docs as per current lbmk
...
docs/maintain/ not updated yet. i'll do that
separately to the user documentation.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10 17:58:18 +01:00
38e9fd08e1
update serprog section
...
the final file path is wrong already.
https://codeberg.org/libreboot/lbmk/pulls/131 modifies the command
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-16 22:05:12 +03:00
72452988d8
update documentation for new lbmk implementation
...
many commands have changed since lbmk audit 2
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-15 05:38:36 +01:00
b1fd88bfc8
use webp
...
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-03 20:25:44 +03:00
870e53cf23
docs/install/spi: reference new pico-serprog links
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03 14:47:28 +01:00
645066369b
add new programmer: raspberry pi pico
...
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-02 16:43:37 +03:00
82218b0759
adapt to recent build system changes
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-17 12:05:33 +01:00
e11541a1ac
news: kgpe-d16, kcma-d8 and kfsn4-dre re-added
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-16 12:51:54 +01:00
ec10e8cb93
safety dance
...
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-07 23:04:10 +01:00
52dffc4d84
added generic SPI docs
2023-04-29 14:13:44 -06:00
67930fa5df
exorcism 2
2023-04-09 22:38:30 +01:00
157ba01446
Merge pull request 'Add information about RPi drive strength' ( #1 ) from nic3-14159/lbwww:master into master
...
Reviewed-on: https://codeberg.org/libreboot/lbwww/pulls/1
2023-04-08 23:21:11 +00:00
ef10acb0a6
codeberg
2023-04-08 19:45:15 +01:00
1eaee8ae3a
Add information about RPi drive strength
2023-04-07 18:23:33 -06:00
e86a613aac
ch341a: explain why pull-up resistors are needed
2023-03-27 19:24:41 +01:00
0dac87838a
docs/install/spi: reveal the mark of the devil
...
(ch341a pics, 3.3v modded with pull-up resistors)
2023-03-27 14:54:29 +01:00
e5ec1f7d17
link to librerpi website
2023-03-04 19:53:36 +00:00
75f44b82c2
install/spi: link to librerpi
2023-03-04 19:47:18 +00:00
87993b88a8
remove bbb-specific info on external flash guides
...
the removed info is a relic, from before all information was
centralised in docs/install/spi.md
remove it, because it is extremely confusing for new readers
2023-03-03 05:44:56 +00:00
3463912e88
use yewtu.be for invidious links
2023-03-03 04:53:23 +00:00
ff260b4f1c
use tabs for command lines
2023-01-08 01:22:04 +00:00
2f712e36fb
install/spi: Generalize to not assume 3.3V
...
At least one Chromebook (gru-kevin) has GD25LQ64C [1], which is a 1.8V
8MB SPI NOR flash chip. Although it can be flashed internally, it has to
be flashed externally when a broken image is flashed. I have been using
an unmodified bad CH341A with a 1.8V adapter which works fine so far.
Try to replace mentions of 3.3V with either nondescript terms like
"power" or "VCC", or both 1.8V and 3.3V, except where it's specifically
about 3.3V. Add warnings to check the part number and datasheet for the
rated supply voltage for the chips, and to make sure to match the
flashing hardware's supply to that.
[1] https://www.gigadevice.com/flash-memory/gd25lq64c/
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-31 11:05:11 +00:00
47c3a9f0bb
cleanup
2022-11-19 04:30:38 +00:00
1f0b6545eb
notices about d16/d8/kfsn4-dre removal
2022-11-19 03:59:02 +00:00
1fc818156c
fix erroneous osbwww mentions (say lbwww instead)
...
another post-merge bonerfix
2022-11-16 22:56:15 +00:00
6e2c3f0234
post-merge bonerfixes
...
mistakes made during osbwww->lbmk merge have been corrected
mostly a few search/replace errors, and deleted pages that have since
been restored, or pages that were incorrectly scrubbed are now full; for
example, pages that said there are no releases yet (from osboot) have
been replaced with the version from libreboot that links to release archives,
which *do* exist in libreboot
i generally fixed all other minor issues with paragraphs that i found, where
the paragraphs made sense in osboot.org but did not so on libreboot.org
this is all of my fixes, after auditing the recent merge. no point splitting
them up. just patch it up and go!
2022-11-15 20:22:34 +00:00
a3bd73a1c2
replace all occurances of osboot with libreboot
2022-11-13 19:31:12 -07:00
0d073ce09c
rebase from osbwww
2022-11-13 14:12:15 -07:00
115e39a5c5
add new diagram to docs/install/spi.md
...
this is imported from osbwww, based on a change shmalebx9 made.
this patch is a rebase/cherry-pick from osbwww performed by leah rowe,
based off of shmalebx9's work
2022-04-02 13:44:01 +01:00
3fc7e6d464
updated build instructions
2021-11-21 16:25:52 +00:00
2c90b91a5d
docs/install/spi: fix the coolest typo ever
2021-11-06 22:47:34 +00:00
4d5ac6cd5b
docs/install/spi: note about wp/hold pins on ch341a
2021-10-16 09:10:52 +01:00
cb0b313dd6
remove dead youtube links
2021-10-04 08:42:46 +01:00
405829f925
delete odysee links. odysee is slow as hell, and very unreliable
2021-08-20 02:08:23 +01:00
a5defb4f5b
docs/install/spi.md: fix wrong names given to pomona test clips
2021-07-29 05:54:25 +01:00
dfedd4bed6
nuke all mentions of stm32 bluepill
...
i'll just add actual instructions later
2021-07-28 05:04:22 +01:00
fa68a196fa
fix bad invidious links
2021-07-19 17:00:09 +01:00
135ca5a07e
docs/install/spi typo: intentaionally. change to: intentionally
2021-05-23 22:38:24 +01:00
d7e5e7640d
add todo to tasks page about RPi distros, and warn about security issues
2021-05-23 22:37:45 +01:00
Leah Rowe