* Add a limit to how many posts can get fetched as a result of a single request
* Add tests
* Always pass `request_id` when processing `Announce` activities
---------
Co-authored-by: nametoolong <nametoolong@users.noreply.github.com>
Some 7.x ElasticSearch versions support some 6.x nodes, thus the version check
is inadequate. I am not sure there is a good way to check if a server
implements all the 7.x APIs, so check server version and minimum wire version
instead.
* fix(status): remove send usage for private unlink_from_conversations
- make unlink_from_conversations public method
- rename unlink_from_conversations to unlink_from_conversations!
- fix send call on private method in statuses_vacuum and batched_remove_status_service
* fix(feeds_vacuum): replace find_in_batches with in_batches
because active record query results should be a little more efficient than
itterating with map and each. Postgres can grasp such lists of ids much quicker
than ruby can.
Will probably make allmost no difference, but cannot hurt either.
* Fix home tl contains post from who blocked me
* Add test
* Fix feed_manager's build_crutches
blocked_by was not includes status' owner
* Add test for status from I blocked
* Fix typo
Nil unwrap causes the admin dashboard to crash/500 when the Chewy client info version number value is nil.
This occurs when running another ES-compatible backend such as MeiliSearch.
Obviously it would be good for chewy to recognise upstream but at least avoiding the crash would be fine.
* Fix trying to fetch posts from other users when fetching featured posts
* Rate-limit discovery of new subdomains
* Put a limit on recursively discovering new accounts
* refactor(statuses_vacuum): remove dead code - unused
Method is not called inside class and private.
Clean up dead code.
* refactor(statuses_vacuum): make retention_period present test explicit
This private method only hides functionality.
It is best practice to be as explicit as possible.
* refactor(statuses_vacuum): improve query performance
- fix statuses_scope having sub-select for Account.remote scope by
`joins(:account).merge(Account.remote)`
- fix statuses_scope unnecessary use of `Status.arel_table[:id].lt`
because it is inexplicit, bad practice and even slower than normal
`.where('statuses.id < ?'`
- fix statuses_scope remove select(:id, :visibility) for having reusable
active record query batches (no re queries)
- fix vacuum_statuses! to use in_batches instead of find_in_batches,
because in_batches delivers a full blown active record query result,
in stead of an array - no requeries necessary
- send(:unlink_from_conversations) not to perform another db query, but
reuse the in_batches result instead.
- remove now obsolete remove_from_account_conversations method
- remove_from_search_index uses array of ids, instead of mapping
the ids from an array - this should be more efficient
- use the in_batches scope to call delete_all, instead of running
another db query for this - because it is again more efficient
- add TODO comment for calling models private method with send
* refactor(status): simplify unlink_from_conversations
- add `has_many through:` relation mentioned_accounts
- use model scope local instead of method call `Status#local?`
- more readable add account to inbox_owners when account.local?
* refactor(status): searchable_by way less sub selects
These queries all included a sub-select. Doing the same with a joins
should be more efficient.
Since this method does 5 such queries, this should be significant,
since it technically halves the query count.
This is how it was:
```ruby
[3] pry(main)> Status.first.mentions.where(account: Account.local, silent: false).explain
Status Load (1.6ms) SELECT "statuses".* FROM "statuses" WHERE "statuses"."deleted_at" IS NULL ORDER BY "statuses"."id" DESC LIMIT $1 [["LIMIT", 1]]
Mention Load (1.5ms) SELECT "mentions".* FROM "mentions" WHERE "mentions"."status_id" = $1 AND "mentions"."account_id" IN (SELECT "accounts"."id" FROM "accounts" WHERE "accounts"."domain" IS NULL) AND "mentions"."silent" = $2 [["status_id", 109382923142288414], ["silent", false]]
=> EXPLAIN for: SELECT "mentions".* FROM "mentions" WHERE "mentions"."status_id" = $1 AND "mentions"."account_id" IN (SELECT "accounts"."id" FROM "accounts" WHERE "accounts"."domain" IS NULL) AND "mentions"."silent" = $2 [["status_id", 109382923142288414], ["silent", false]]
QUERY PLAN
------------------------------------------------------------------------------------------------------------------
Nested Loop (cost=0.15..23.08 rows=1 width=41)
-> Seq Scan on accounts (cost=0.00..10.90 rows=1 width=8)
Filter: (domain IS NULL)
-> Index Scan using index_mentions_on_account_id_and_status_id on mentions (cost=0.15..8.17 rows=1 width=41)
Index Cond: ((account_id = accounts.id) AND (status_id = '109382923142288414'::bigint))
Filter: (NOT silent)
(6 rows)
```
This is how it is with this change:
```ruby
[4] pry(main)> Status.first.mentions.joins(:account).merge(Account.local).active.explain
Status Load (1.7ms) SELECT "statuses".* FROM "statuses" WHERE "statuses"."deleted_at" IS NULL ORDER BY "statuses"."id" DESC LIMIT $1 [["LIMIT", 1]]
Mention Load (0.7ms) SELECT "mentions".* FROM "mentions" INNER JOIN "accounts" ON "accounts"."id" = "mentions"."account_id" WHERE "mentions"."status_id" = $1 AND "accounts"."domain" IS NULL AND "mentions"."silent" = $2 [["status_id", 109382923142288414], ["silent", false]]
=> EXPLAIN for: SELECT "mentions".* FROM "mentions" INNER JOIN "accounts" ON "accounts"."id" = "mentions"."account_id" WHERE "mentions"."status_id" = $1 AND "accounts"."domain" IS NULL AND "mentions"."silent" = $2 [["status_id", 109382923142288414], ["silent", false]]
QUERY PLAN
------------------------------------------------------------------------------------------------------------------
Nested Loop (cost=0.15..23.08 rows=1 width=41)
-> Seq Scan on accounts (cost=0.00..10.90 rows=1 width=8)
Filter: (domain IS NULL)
-> Index Scan using index_mentions_on_account_id_and_status_id on mentions (cost=0.15..8.17 rows=1 width=41)
Index Cond: ((account_id = accounts.id) AND (status_id = '109382923142288414'::bigint))
Filter: (NOT silent)
(6 rows)
```
* fixes ArgumentError when proxy is used
* Update app/lib/request.rb
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
Co-authored-by: Eugen Rochko <eugen@zeonfederated.com>
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
Switch to monkey-patching http.rb rather than a runtime extend of each
response, so as to avoid busting the global method cache. A guard is
included that will provide developer feedback in development and test
environments should the monkey patch ever collide.
- Improve tests
- Fix possible crash when application of a reblogged post isn't set
- Fix discrepancies around favourited and reblogged attributes
- Fix discrepancies around pinned attribute
- Fix polls not being hydrated
* Change “Translate” button to only show up when a translation backend is configured
Fixes#19346
* Add `translation` attribute to /api/v2/instance to expose whether the translation feature is enabled
Fixes#19328
* Change public accounts pages to mount the web UI
* Fix handling of remote usernames in routes
- When logged in, serve web app
- When logged out, redirect to permalink
- Fix `app-body` class not being set sometimes due to name conflict
* Fix missing `multiColumn` prop
* Fix failing test
* Use `discoverable` attribute to control indexing directives
* Fix `<ColumnLoading />` not using `multiColumn`
* Add `noindex` to accounts in REST API
* Change noindex directive to not be rendered by default before a route is mounted
* Add loading indicator for detailed status in web UI
* Fix missing indicator appearing while account is loading in web UI
* Move ActivityPub::FetchRemoteAccountService to ActivityPub::FetchRemoteActorService
ActivityPub::FetchRemoteAccountService is kept as a wrapper for when the actor is
specifically required to be an Account
* Refactor SignatureVerification to allow non-Account actors
* fixup! Move ActivityPub::FetchRemoteAccountService to ActivityPub::FetchRemoteActorService
* Refactor ActivityPub::FetchRemoteKeyService to potentially return non-Account actors
* Refactor inbound ActivityPub payload processing to accept non-Account actors
* Refactor inbound ActivityPub processing to accept activities relayed through non-Account
* Refactor how Account key URIs are built
* Refactor Request and drop unused key_id_format parameter
* Rename ActivityPub::Dereferencer `signature_account` to `signature_actor`
* Add a more descriptive PrivateNetworkAddressError exception class
* Remove unnecessary exception class to rescue clause
* Remove unnecessary include to JsonLdHelper
* Give more neutral error message when too many webfinger redirects
* Remove unnecessary guard condition
* Rework how “ActivityPub::FetchRemoteAccountService” handles errors
Add “suppress_errors” keyword argument to avoid raising errors in
ActivityPub::FetchRemoteAccountService#call (default/previous behavior).
* Rework how “ActivityPub::FetchRemoteKeyService” handles errors
Add “suppress_errors” keyword argument to avoid raising errors in
ActivityPub::FetchRemoteKeyService#call (default/previous behavior).
* Fix Webfinger::RedirectError not being a subclass of Webfinger::Error
* Add suppress_errors option to ResolveAccountService
Defaults to true (to preserve previous behavior). If set to false,
errors will be raised instead of caught, allowing the caller to be
informed of what went wrong.
* Return more precise error when failing to fetch account signing AP payloads
* Add tests
* Fixes
* Refactor error handling a bit
* Fix various issues
* Add specific error when provided Digest is not 256 bits of base64-encoded data
* Please CodeClimate
* Improve webfinger error reporting
* Add model for custom filter keywords
* Use CustomFilterKeyword internally
Does not change the API
* Fix /filters/edit and /filters/new
* Add migration tests
* Remove whole_word column from custom_filters (covered by custom_filter_keywords)
* Redesign /filters
Instead of a list, present a card that displays more information and handles
multiple keywords per filter.
* Redesign /filters/new and /filters/edit to add and remove keywords
This adds a new gem dependency: cocoon, as well as a npm dependency:
cocoon-js-vanilla. Those are used to easily populate and remove form fields
from the user interface when manipulating multiple keyword filters at once.
* Add /api/v2/filters to edit filter with multiple keywords
Entities:
- `Filter`: `id`, `title`, `filter_action` (either `hide` or `warn`), `context`
`keywords`
- `FilterKeyword`: `id`, `keyword`, `whole_word`
API endpoits:
- `GET /api/v2/filters` to list filters (including keywords)
- `POST /api/v2/filters` to create a new filter
`keywords_attributes` can also be passed to create keywords in one request
- `GET /api/v2/filters/:id` to read a particular filter
- `PUT /api/v2/filters/:id` to update a new filter
`keywords_attributes` can also be passed to edit, delete or add keywords in
one request
- `DELETE /api/v2/filters/:id` to delete a particular filter
- `GET /api/v2/filters/:id/keywords` to list keywords for a filter
- `POST /api/v2/filters/:filter_id/keywords/:id` to add a new keyword to a
filter
- `GET /api/v2/filter_keywords/:id` to read a particular keyword
- `PUT /api/v2/filter_keywords/:id` to edit a particular keyword
- `DELETE /api/v2/filter_keywords/:id` to delete a particular keyword
* Change from `irreversible` boolean to `action` enum
* Remove irrelevent `irreversible_must_be_within_context` check
* Fix /filters/new and /filters/edit with update for filter_action
* Fix Rubocop/Codeclimate complaining about task names
* Refactor FeedManager#phrase_filtered?
This moves regexp building and filter caching to the `CustomFilter` class.
This does not change the functional behavior yet, but this changes how the
cache is built, doing per-custom_filter regexps so that filters can be matched
independently, while still offering caching.
* Perform server-side filtering and output result in REST API
* Fix numerous filters_changed events being sent when editing multiple keywords at once
* Add some tests
* Use the new API in the WebUI
- use client-side logic for filters we have fetched rules for.
This is so that filter changes can be retroactively applied without
reloading the UI.
- use server-side logic for filters we haven't fetched rules for yet
(e.g. network error, or initial timeline loading)
* Minor optimizations and refactoring
* Perform server-side filtering on the streaming server
* Change the wording of filter action labels
* Fix issues pointed out by linter
* Change design of “Show anyway” link in accordence to review comments
* Drop “irreversible” filtering behavior
* Move /api/v2/filter_keywords to /api/v1/filters/keywords
* Rename `filter_results` attribute to `filtered`
* Rename REST::LegacyFilterSerializer to REST::V1::FilterSerializer
* Fix systemChannelId value in streaming server
* Simplify code by removing client-side filtering code
The simplifcation comes at a cost though: filters aren't retroactively
applied anymore.
* Change RSS feeds
- Use date and time for titles instead of ellipsized text
- Use full content in body, even when there is a content warning
- Use media extensions
* Change feed icons and add width and height attributes to custom emojis
* Fix custom emoji animate on hover breaking
* Fix tests
* Fix PeerTube videos appearing with an erroneous “Edited at” marker
PeerTube videos have an `updated` field equal to `published`.
When processing an incoming activity that has the same value for `updated` and
`published`, assume this doesn't represent an actual edit.
* Please CodeClimate
* Fix error responses in `from` search prefix (addresses mastodon/mastodon#17941)
Using unsupported prefixes now reports a 422; searching for posts from an
account the instance is not aware of reports a 404. TODO: The UI for this
on the front end is abysmal.
Searching `from:username@domain` now succeeds when `domain` is the local
domain; searching `from:@username(@domain)?` now works as expected.
* Remove unused methods on new Error classes as they are not being used
Currently when `raise`d there are error messages being supplied, but
this is not actually being used. The associated `raise`s have been
edited accordingly.
* Remove needless comments
* Satisfy rubocop
* Try fixing tests being unable to find AccountFindingConcern methods
* Satisfy rubocop
* Simplify `from` prefix logic
This incorporates @ClearlyClaire's suggestion (see
https://github.com/mastodon/mastodon/pull/17963#pullrequestreview-933986737).
Accepctable account strings in `from:` clauses are more lenient than
before this commit; for example, `from:@user@example.org@asnteo +cat`
will not error, and return posts by @user@example.org containing the
word "cat". This is more consistent with how Mastodon matches mentions
in statuses. In addition, `from` clauses will not be checked for
syntatically invalid usernames or domain names, simply 404ing when
`Account.find_remote!` raises ActiveRecord::NotFound.
New code for this PR that is no longer used has been removed.
* Change e-mail notifications to only be sent when recipient is offline
Change the default for follow and mention notifications back on
* Add preference to always send e-mail notifications
* Change wording
* Fix edits with no actual changes being allowed locally
* Fix edits with no actual changes being allowed through ActivityPub
* Fix false positive changes caused by description processing in model
* Fix not recording poll expiration update
* Fix test
* Revert changes to ProcessStatusUpdateService
* Various fixes and improvements
* Fix code style issues
* Various changes and improvements
* Add guard clause
Eugen Rochko