* Changement de « Changement de mot de passe » en « Sécurité »
* Suppression de « (Two-factor auth) »
Change la valeur de la chaîne « two_factor_authentication » de « Identification à deux facteurs (Two-factor auth) » à « Identification à deux facteurs ».
La traduction anglaise entre parathentèse était redondante et gênait la lecture.
Change the value of the "two_factor_authentication" from "Identification à deux facteurs (Two-factor auth)" to "Identification à deux facteurs".
The English translation in brackets was superflous and was getting in the way of the reader.
* Remplace « ' » par « ’ »
Retire de la traduction les apostrophes droites « ' » (U+0027) au profit des apostrophes typographiques « ’ » (U+2019).
En typographie française, les apostrophes typographiques sont utilisées à la place des apostrophes droites. La traduction était jusqu’ici incohérente et utilisait les deux.
Remove from the translation all the vertical apostrophes (U+0027) in favor of the curly ones (U+2019).
In French typography, typographic apostrophes are used instead of vertical ones. The translation was incoherent and used both.
* Remplace « ... » par « … »
Remplace les séries de trois points par le caractère dédié « … » (U+2026).
Replace all the series of three dots by the dedicated character "…" (U+2026).
* Mise à jour
Crée config/locales/activerecord.fr.yml, ajoute de nouvelles chaînes et met à jour certains textes.
Les compteurs de caractères pour le pseudonyme et la biographie devrait maintenant pouvoir fonctionner même quand l’interface est en français.
Create config/locales/activerecord.fr.yml, add new strings et update some textes.
The caracters counters for the username and the biography should now work even when the interface is in French.
* Remplace « A » par « À »
Remplace « A » par « À » aux endroits où le mot est mal orthographié.
Replace "A" by "À" when the wrong word is used.
* Ajout d’espaces insécables
Ajoute des espaces insécables suivant les régles nécessaires en typographie française.
Add non-breaking spaces following rules of French typography.
* Remplace « certain » par « certain·e »
Harmonise la traduction en remplaçant « certain » par sa forme épicène.
Harmonize the translation by replacing "certain" (sure) by its epicene form.
* Corrige un angliscisme
Remplace « adresse e-mail » par « adresse électronique ».
Replace "adresse e-mail" (e-mail address) by "adresse électronique" (electronic address).
* add a system_font_ui setting on the server
* Plug the system_font_ui on the front-end
* add EN/FR locales for the new setting
* put Roboto after all other fonts
* remove trailing whitespace so CodeClimate is happy
* fix user_spec.rb
* correctly write user_spect this time
* slightly better way of adding the classes
* add comments to the system-font stack for clarification
* use .system-font for the class instead
* don't use multiple lines for comments
* remove trailing whitespace
* use the classnames module for consistency
* use `mastodon-font-sans-serif` instead of Roboto directly
* Update links in status content on update as well as mount
Fixes occasional bugs with mentions and hashtags not being set to open in a new column like they should, and instead opening in a new page
* use classList instead of raw className
This fixes a warning on status unmounting (e.g. deletion).
This also resets IntersectionObserverWrapper on disconnect to avoid `unobserve()` calls
which has bug in Edge.
* Fix embedded SVG fill attribute
SCSS darken/lighten functions may not return a color value, but a color
name like "white". See following example:
https://www.sassmeister.com/gist/c41da93b87d536890ddf30a1f42e7816
This patch will normalize $color argument to FFFFFF style.
I also changed the function name from "url-friendly-colour" to
"hex-color", Because...
1. The name "url-friendly" is not meaningful enough to describe what it
does.
2. It is familier to me using "color" rather than "colour"
kojima:kojiMac mastodon[master]$ git grep -l colour
app/javascript/styles/boost.scss
spec/fixtures/files/attachment.jpg
kojima:kojiMac mastodon[master]$ git grep -l color
.rspec
.scss-lint.yml
Gemfile.lock
app/javascript/mastodon/features/status/components/action_bar.js
app/javascript/styles/about.scss
app/javascript/styles/accounts.scss
app/javascript/styles/admin.scss
app/javascript/styles/basics.scss
app/javascript/styles/boost.scss
app/javascript/styles/compact_header.scss
app/javascript/styles/components.scss
app/javascript/styles/containers.scss
app/javascript/styles/footer.scss
app/javascript/styles/forms.scss
app/javascript/styles/landing_strip.scss
app/javascript/styles/reset.scss
app/javascript/styles/stream_entries.scss
app/javascript/styles/tables.scss
app/javascript/styles/variables.scss
app/views/admin/subscriptions/_subscription.html.haml
app/views/layouts/application.html.haml
app/views/layouts/error.html.haml
app/views/manifests/show.json.rabl
bin/webpack-dev-server
config/initializers/httplog.rb
public/500.html
public/emoji/1f1e6-1f1e8.svg
public/emoji/1f1ec-1f1f8.svg
public/emoji/1f1f3-1f1ee.svg
public/emoji/1f1fb-1f1ec.svg
spec/fixtures/requests/idn.txt
yarn.lock
* Add semicolon
* Added Korean Translation (based on japanese)
* Update korean translation
* Update korean translation: fix syntax error
* Updated korean translation
* Update korean translation
* Update ko.json
Translate non-translated parts
* Update ko.yml
Translated missed parts - and fixed some typos
* Create simple_form.ko.yml
* Updated korean translation
* i18n: fix test fails
* add missing locales for French translation
* accent "Media" in the front-end locales
* images => médias
* Change 'rapport' to 'signalement' in French locales to be more coherent
* fix typo
* remove duplicate EN locale
* translate missing locales
* update missing locale
* fix typo
* unify with "utilisateur⋅ice⋅s"
* address PR comments
* Fix#3910 - Require OTP authentication to disable 2FA. Also, remove ability
to generate new OTP backup codes *after* initial backup codes were handed
out during activation
* Restore recovery code re-generation
* Improve display of some 2FA elements
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
(This patch has been merged as bugfix and reverted, but still valuable as
improvement)
Previously, we've attached IntersectionObserver twice for boosted statuses:
wrapper Status and wrapped Status. but wrapped Status don't need to manage
intersection and visibility by itself, because it's a part of wrapper Status.
* Revert "Bump version to 1.4.4"
This reverts commit 1585b0c6cc.
* Revert "Fix conversations (fixes#3869) (#3870)"
This reverts commit 15b43f555d.
* Revert "Fix streaming server. Redis connection subscribe for each channel. (#3828)"
This reverts commit d8ec832806.
* Revert "Filter direct statuses in Status.as_home_timeline (#3842)"
This reverts commit bab5a18232.
* Revert "Fix RemoteFollow behavior (#3868)"
This reverts commit a20cf3b64e.
* Revert "Update fabricator for MediaAttachment to attach a file according to type (#3862)"
This reverts commit 356df7ae6b.
* Revert "Upgrade React Router (#3677)"
This reverts commit 8f03fdce7f.
* Revert "Do not call setState from unmounted component (#3853)"
This reverts commit 1fc6cb4997.
* Revert "Replace TextIconButton for SensitiveButton to IconButton (#3759)"
This reverts commit eb832e88f4.
* Revert "Fix RTL detection on Ruby side (#3867)"
This reverts commit b16b69350e.
* Revert "i18n: Fixed typo in Polish translation (#3864)"
This reverts commit da6fa029f6.
* Revert "Don't attach IntersectionObserver for wrapped statuses (#3863)"
This reverts commit 94ad0706f5.
This fixes a bug that sometimes boosted statuses being hidden on scrolling.
Previously, we've attached IntersectionObserver twice for boosted statuses:
wrapper Status and wrapped Status. This will call intersection handler twice,
so this may results race condition...probably.
mergeDeep also merges columns, but it should be replaced simply.
So in the new function, first apply mergeDeep except columns, and set default columns if columns unset.
* Add form for account deletion
* If avatar or header are gone from source, remove them
* Add option to have SuspendAccountService remove user record, add tests
* Exclude suspended accounts from search
* Move ancestors/descendants out of timelines reducer
* Refactor timelines reducer
All types of timelines now have a flat structure and use the same
reducer functions and actions
* Reintroduce some missing behaviours
* Fix wrong import in reports
* Fix includes typo
* Fix issue related to "next" pagination in timelines and notifications
* Fix bug with timeline's initial state, expandNotifications
- Use plaintext
- Strip out URLs
- Strip out mentions
- Strip out hashtags
- Strip out whitespace from "overall" count
- Consistent between JS and Ruby
* Add regex filter on the community timeline and the public timeline
* correcting
* Adjust the height of header buttons
* Remove trailing spaces
* Remove trailing spaces
* Solve some code duplication
* reset the state of the locale files in app/javascript/mastodon/locales
* adjust to upstream
* adjust to upstream
* change keys of locale settings
* i18n Update : Add preference setting for delete toot modal
Adding a line for "Add preference setting for delete toot modal"
* i18n update for pin/unpin
Update to add two more translations
* i18n update to have the dates in plain occitan
* Removed the blank line
* %{selft} back in the translation
* Allow mounting arbitrary columns
* Refactor column headers, allow pinning/unpinning and moving columns around
* Collapse animation
* Re-introduce scroll to top
* Save column settings properly, do not display pin options in
single-column view, do not display collapse icon if there is
nothing to collapse
* Fix one instance of public timeline being closed closing the stream
Fix back buttons inconsistently sending you back to / even if history exists
* Getting started displays links to columns that are not mounted
* zh-cn.json: "additional info" -> "more info"
This commit changes the "extended info" (about/more) text to something that translates to "more info", as "additional info" in zh can sound like appending things to the (ugh) navbar, I guess.
Or should I just change it to "about this site" (关于本站)?
* zh-cn.json: navbar.info -> "about this site"
* zh-臺灣.json: navbar.info -> "about this site"
This implementation is a bit smaller and still has the following benefits:
* No need of app/javascript/packs/custom.js
For custom stylesheet, it typically has only
"require('../styles/custom.scss')" and is redundant.
* No need to extract vendor stylesheet to another asset
Extracting vendor stylesheet could be forgotten by developers who do not
use custom stylesheet.
* Set delete_modal preference to true by default
* Does not show confirmation modal if delete_modal is false
* Add ja translation for preference setting page
The combination of object-fit, relative position 50% from top and translating it
back upwards 50% is what allows us to crop the video properly, so it needs to
be +50%-50%
* Fix#2922 - Load stylesheet from "custom.css" entrypoint when present
This is pretty much the same way it worked as before, albeit with
having to create app/javascript/packs/custom.js with
require('../styles/custom.scss') (or whatever you want really), which
will be a blank slate for you to import whatever you want
* Remove old assets directory
* Extract font-awesome into common.css and always load it
* Update nl strings for 1.4
* Update nl strings for 1.4
* Update nl strings for 1.4
* nl strings (+1)
More new OTP strings will be translated another time
because it may causes flicker on the conversation when it contains blocked/muted user's status.
We use `/api/v1/statuses/{id}/context` to obtain status ids in the
conversation which filters blocked/muted user, but also uses internal
cache constructed from `in_reply_to_id` by `normalizeStatus()` in
`reducers/timelines.js` on each status loading which doesn't filter.
So statuses appears in conversation if those are cached, even those
statuses are from blocked/muted user. Then context cache will be updated
with the result of the context API and those statuses will be removed.
I have left the `normalizeStatus()` function itself which is called many
functions in the file as a placeholder for now, but maybe it should be
removed completely.
unarist