* Revert "Fixes/do not override timestamps (#7331)"
This reverts commit 9c1e1005f4.
* Document Snowflake ID corner-case a bit more
Snowflake IDs are used for two purposes: making object identifiers harder to
guess and ensuring they are in chronological order. For this reason, they
are based on the `created_at` attribute of the object.
Unfortunately, inserting items with older snowflakes IDs will break the
assumption of consumers of the paging APIs that new items will always have
a greater identifier than the last seen one.
* Add `override_timestamps` virtual attribute to not correlate snowflake ID with created_at
* Do not override timestamps for incoming toots
* Remove every reference to override_timestamps
Statuses are now created with the announced publishing date
and are only pushed to timelines if that date is at most
6 hours earlier than the time at which it is processed.
* Revert "Weblate translations 20180503 (#7325)"
This reverts commit b84b11c41a.
* Revert "Prevent timeline from moving when cursor is hovering over it (fixes#7278) (#7327)"
This reverts commit 9188537f5f.
* Revert "Add pry-byebug (#7307)"
This reverts commit 7236e9effe.
* Revert "Do not override timestamps for incoming toots (#7326)"
This reverts commit b6f4e83c93.
Offload creation of local notifications to a worker. Remove two
redundant SQL queries from ProcessMentionsService, remove n+1
XML/JSON serialization via memoization
* No need to re-require sidekiq plugins, they are required via Gemfile
* Add derailed_benchmarks tool, no need to require TTY gems in Gemfile
* Replace ruby-oembed with FetchOEmbedService
Reduce startup by 45382 allocated objects
* Remove preloaded JSON-LD in favour of caching HTTP responses
Reduce boot RAM by about 6 MiB
* Fix tests
* Fix test suite by stubbing out JSON-LD contexts
* Adjust privacy policy to be more specific to Mastodon
Fix#6613
* Change data retention of IP addresses from 5 years to 1 year
* Add even more information
* Remove all (now invalid) translations of the privacy policy
* Add information about archive takeout, remove pointless consent section
* Emphasis on DM privacy
* Improve wording
* Add line about data use for moderation purposes
to_s method of HTTP::Response keeps blocking while it receives the whole
content, no matter how it is big. This means it may waste time to receive
unacceptably large files. It may also consume memory and disk in the
process. This solves the inefficency by checking response length while
receiving.
HTTP connections must be explicitly closed in many cases, and letting
perform method close connections makes its callers less redundant and
prevent them from forgetting to close connections.
* Fix#201: Account archive download
* Export actor and private key in the archive
* Optimize BackupService
- Add conversation to cached associations of status, because
somehow it was forgotten and is source of N+1 queries
- Explicitly call GC between batches of records being fetched
(Model class allocations are the worst offender)
- Stream media files into the tar in 1MB chunks
(Do not allocate media file (up to 8MB) as string into memory)
- Use #bytesize instead of #size to calculate file size for JSON
(Fix FileOverflow error)
- Segment media into subfolders by status ID because apparently
GIF-to-MP4 media are all named "media.mp4" for some reason
* Keep uniquely generated filename in Paperclip::GifTranscoder
* Ensure dumped files do not overwrite each other by maintaing directory partitions
* Give tar archives a good name
* Add scheduler to remove week-old backups
* Fix code style issue
Currently, Mastodon will retry delivering toots for a bit over 1 hour.
This is a very short timespan when considering private and direct toots, which
cannot be seen by the recipient at all after the delivery attempts have failed.
Ideally, private and direct toots should have a different number of retries,
but I do not know how to do that.
* Fix regeneration marker not being removed after completion
* Return HTTP 206 from /api/v1/timelines/home if regeneration in progress
Prioritize RegenerationWorker by putting it into default queue
* Display loading indicator and poll home timeline while it regenerates
* Add graphic to regeneration message
* Make "not found" indicator consistent with home regeneration
* Avoid sending explicit Undo->Announce when original deleted
* Do not forward a reply back to the server that sent it
* Deduplicate inboxes of rebloggers' followers for delete forwarding
* Adjust test
* Fix wrong class, bad SQL, wrong variable, outdated comment
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
Thread resolving is one of the few tasks that isn't retried on failure.
One common cause for failure of this task is a well-connected user replying to
a toot from a little-connected user on a small instance: the small instance
will get many requests at once, and will often fail to answer requests within
the 10 seconds timeout used by Mastodon.
This changes makes the ThreadResolveWorker retry a few times, with a
rapidly-increasing time before retries and large random contribution in order
to spread the load over time.
* Clean up reblog-tracking sets from FeedManager
Builds on #5419, with a few minor optimizations and cleanup of sets
after they are no longer needed.
* Update tests, fix multiply-reblogged case
Previously, we would have lost the fact that a given status was
reblogged if the displayed reblog of it was removed, now we don't.
Also added tests to make sure FeedManager#trim cleans up our reblog
tracking keys, fixed up FeedCleanupScheduler to use the right loop,
and fixed the test for it.
* Keep references to all reblogs of a status on home feed
When inserting reblog: Add to set of reblogs of this status on
the feed, if original status was present in the feed, add it to
that set as well.
When removing a reblog: Remove it from that set. Take random
remaining item from the set. If one exists, re-insert it into feed,
otherwise do not re-insert anything.
Fix#4210
* When original is removed, toss out reblog references
- Rename Mastodon::TimestampIds into Mastodon::Snowflake for clarity
- Skip for statuses coming from inbox, aka delivered in real-time
- Skip for statuses that claim to be from the future
* Improve error handling on LinkCrawlWorker
* Ignore TimeoutError and InvalidURIError too
* Record errors to debug log
* Enable dead job queue on LinkCrawlWorker
Since most of acceptable errors were already ignored, only our side issue should go to dead job queue.
* Ignore all http gem errors
* Revert "Enable UniqueRetryJobMiddleware even when called from sidekiq worker (#4836)"
This reverts commit 0080804f44.
* Revert "Do not execute the job with the same arguments as the retry job (#4814)"
This reverts commit 892aeb7ffe.
* Whenever a remote keypair changes, unfollow them and re-subscribe to them
In Mastodon (it could be different for other OStatus or AP-enabled software),
a keypair change is indicative of whole user (or instance) data loss. In this
situation, the “new” user might be different, and almost certainly has an empty
followers list. In this case, Mastodon instances will disagree on follower
lists, leading to unreliable delivery and “shadow followers”, that is users
believed by a remote instance to be followers, without the affected user
knowing.
Drawbacks of this change are:
1. If an user legitimately changes public key for some reason without losing
data (not possible in Mastodon at the moment), they will have their remote
followers unsubscribed/re-subscribed needlessly.
2. Depending of the number of remote followers, this may generate quite some
traffic.
3. If the user change is an attempt at usurpation, the remote followers will
unknowingly follow the usurper. Note that this is *not* a change of
behavior, Mastodon already behaves like that, although delivery might be
unreliable, and the usurper would not have known the former user's
followers.
* Rename ResubscribeWorker to RefollowWorker
* Process followers in batches
When a new user confirms their e-mail, bootstrap their home timeline
by automatically following a set of accounts. By default, all local
admin accounts (that are unlocked). Can be customized by new admin
setting (comma-separated usernames, local and unlocked only)
* Decouple Status#local? from uri being nil
* Replace on-the-fly URI generation with stored URIs
- Generate URI in after_save hook for local statuses
- Use static value in TagManager when available, fallback to tag format
- Make TagManager use ActivityPub::TagManager to understand new format
- Adjust tests
* Use other heuristic for locality of old statuses, do not perform long query
* Exclude tombstone stream entries from Atom feed
* Prevent nil statuses from landing in Pubsubhubbub::DistributionWorker
* Fix URI not being saved (#4818)
* Add more specs for Status
* Save generated uri immediately
and also fix method order to minimize diff.
* Fix alternate HTML URL in Atom
* Fix tests
* Remove not-null constraint from statuses migration to speed it up
Requires moving Atom rendering from DistributionWorker (where
`stream_entry.status` is already nil) to inline (where
`stream_entry.status.destroyed?` is true) and distributing that.
Unfortunately, such XML renderings can no longer be easily chained
together into one payload of n items.
* Add handling of Linked Data Signatures in payloads
* Add a way to sign JSON, fix canonicalization of signature options
* Fix signatureValue encoding, send out signed JSON when distributing
* Add missing security context
ThibG