My collection of mechanical keyboards.
QMK custom keymaps is
here
My first keeb.
Damn it's so loud :D
I bought it from my friend.
- USB-C
- Plate: PC
- Gasket mount
-
PCB: DZ60 RGB-WKL Hot-Swap
-
South facing (mạch xuôi), but 2 switches in the top
left, near USB-C port, are North facing (mạch
ngược).
- Stabs 2 x 2U + 7U
My layout is based on:
My layout's quirk/gotcha:
-
Replace
Caps Lock
1.75U with Control
1.75U.
- 2
Command
1.5U.
- 2
Option
1U.
- 1
Backspace
1.5U.
- 1
| \
1U.
-
1
Left Shift
2.25U and 1 Right Shift
1.75U.
- 1
Space
7U.
Things I don't like, also
honest review from Reddit:
-
The sides don't have any gaskets, so the keys on the far left and right
bend down more. They will pop out of the hotswap PCB or the plate if
pressing too hard.
-
PCB:
- Not all keys are South facing.
-
Can not config RGB per key for real. Only support RGB mode
switching.
I bought it from
ergomech.store
with the cheapest option.
Things I don't like:
- Sandwhich style is meh when typing.
- The left case is so tight to put switch in.
Buy it from ShopeeVN. I choose this switch because I prefer linear (please
be silent).
- Type: Linear
- Mount: 5-pin
- Housing material: PC
- Stem material: POM
- Actuation force: 43g
- Bottom out force: 62g
- Spring: Gold plated spring
- Total travel: 4.0mm
I was given this switch by my friend. Currently using for alpha keys. Love
the silent.
- Type: Linear
- Mount: 5-pin
- Housing material: ???
- Stem material: ???
- Actuation force: 48g
- Bottom out force: 52g
- Spring: ???
- Pre travel: 1.5-2.0mm
- Total travel: 3.8mm
I was given this switch by my friend, full mod (lube + film).
- Type: Linear
- Mount: 5-pin
- Top housing material: PC
- Bottom housing material: Nylon PA66
- Stem material: POM
- Actuation force: 65g
- Spring: ???
- Total travel: 4 mm
Buy it from ShopeeVN, friends told it's smooth. I buy the heavier aka 67g.
- Type: Linear
- Mount: 5-pin
- Housing material: UHMWPE
- Stem material: POM
- Force: 67g
- Spring: ???
- Total travel: ???
Currently, I use Akko 9009 Cherry Profile and EnjoyPBT 9009 Cherry
Profile. The space of EnjoyPBT 9009 is not straight so I use Akko 9009
space.
I know I know, I love 9009 color too much.
Be careful:
-
Check if keycap with stab (space, enter, shifht) is straight or not.
- Check is keycap is tight on switch or not.
I buy vim kit first then base later.
I only buy 40s kit.