It doesn't matter whether the grafted text contains a newline or not.
It only matters whether the mark was before or after the cursor. When
it was after the cursor, the mark needs to be set to the bottom line of
the grafted text and its x coordinate needs adjustment; and when it was
before the cursor, the mark just needs to be set to the top line of the
grafted text.
Now you can have a look elsewhere in the buffer (and even delete
or paste stuff there) and when you return to the original line
and continue typing, any spillover from automatic hard-wrapping
will spill over onto the same line it spilled over to before.
You can even switch to a different buffer and return and continue
typing, and stuff will still spill over to the same line.
In the bargain, this gets rid of a bit of flag-resetting code
that was run for many keystrokes, in most cases needlessly.
This addresses https://savannah.gnu.org/bugs/?56189.
All other options are off by default and can only be switched *on*
(either by a command-line option or a nanorc setting) -- there are
no command-line options to switch them off again. Except for the
--breaklonglines/--nowrap pair. So these need special handling.
This fixes https://savannah.gnu.org/bugs/?56119.
Reported-by: Sébastien Desreux <seb@h-k.fr>
Bug existed since version 4.0, commit 4d40bea5.
For relatively inexperienced users (as most users of nano probably are)
it is far better that nano produces POSIX text files by default, where
each line ends with a newline character. This means that these files
will "print" properly (not gluing the next prompt at the end of the
last line), tools will see and process each line of them, and, while
editing, adding text at the end is easier.
This addresses https://savannah.gnu.org/bugs/?55997.
Reported-by: Ralph Corderoy <ralph@inputplus.co.uk>
When nano was configured with --enable-tiny --enable-speller, the
block_sigwinch() function should be available, to mask SIGWINCHes
during a spell check.
Somehow a SIGWINCH pushes nano past the wait() in do_alt_speller(),
even though the external spelling program hasn't finished.
This fixes https://savannah.gnu.org/bugs/?56010
by reverting commit 1f39f60b.
Bug existed since version 3.2.
When there is a dash among the files on the command line, nano will read
data from standard input, which means that the latter is not connected to
a terminal and thus cannot be recognized as a Linux VT until nano has
finished reading the input and has reconnected the input source to the
terminal.
The first probe for a Linux VT is kept in place for now, so that nano
can stop when there are errors in an rcfile while running on a VT.
(This stopping will not work when data is read from standard input,
of course, but that is a smaller fish.)
This fixes https://savannah.gnu.org/bugs/?55912.
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Bug existed since the recognition of modified cursor keys on a Linux
console was introduced, in version 2.6.3, commit 290d278f.
Option -J (--guidestripe) takes a column number as argument and then
shows a vertical, colored bar over the entire height of the buffer,
to aid the user in regulating the width of the text when the terminal
is wider than this desired width.
This fulfills https://bugs.debian.org/916392.
Requested-by: Arturo Borrero González <arturo@debian.org>
And fulfills https://savannah.gnu.org/bugs/?55315.
Requested-by: Bryan Christ <bryan.christ@gmail.com>
If these two command-line options would override an rcfile setting of
their counterpart new option, the user might come to expect being able
to do this also in the future. But these old options will be obsoleted
at some moment, so... better start ignoring them right now.
Also, enable smooth scrolling by default, and don't waste the row
directly below the title bar. The use of the latter also serves
as a small visual reminder that this nano is different.
This addresses https://savannah.gnu.org/bugs/?55067.
This signals our break from trying to be as compatible with Pico as
possible. We were already incompatible with modern Pico in the -n
and -W options, and in several character-set and color options, so
ignoring those five options brought us very little.
Anyway, soon some of those options will be reused and will have the
effect of making nano look and behave more like Pico.
Now also comment blocks in Fortran, Lisp, Lua, Postgres, and TeX
can be rewrapped with ^J.
This partially addresses https://savannah.gnu.org/bugs/?55435.
Kind-of-requested-by: David Griffith <dave@661.org>
When the user switches backups on later (with M-B in the ^O menu),
the specified folder should have been checked for validity.
This fixes https://savannah.gnu.org/bugs/?55423.
Bug existed since the check for a valid backup directory was introduced
in version 2.8.7, commit 751e7f0f.
When using --raw, ncurses does not catch and convert any mouse event,
and thus the coordinates of a mouse click would get inserted into the
buffer as seemingly random characters. So, let --rawsequences override
and disable --mouse, to prevent the accidental entering of junk.
This fixes https://savannah.gnu.org/bugs/?55303.
Using --zap or -Z on the command line, or 'set zap' in a nanorc file,
makes the <Bsp> and <Del> keys erase selected text (a marked region)
as they do in some other editors, and without affecting the cutbuffer.
This fulfills https://savannah.gnu.org/bugs/?54837.
Requested-by: Liu Hao <lh_mouse@126.com>
Signed-off-by: Brand Huntsman <alpha@qzx.com>
When --view is used without --ignorercfiles, the user could view
other files anyway if they had 'set multibuffer' in their nanorc.
So, just make this the default when --view is used, also because
"multibuffer" cannot be toggled once nano is running in view mode.
When the viewing of other files in view mode should not be allowed,
one should now additionally use --restricted.
The 'wrap_at' variable, removed in commit e90b7cf4, is actually needed
to store the original value of the --fill option when it is negative.
Otherwise, changing the screen width will not update the wrapping point
properly.
This fixes https://savannah.gnu.org/bugs/?54861.
Reported-by: Brand Huntsman <alpha@qzx.com>
When using --view --multibuffer --restricted, it is the latter option
that forbids reading in another file, so that is what the status bar
should say.
This fixes https://savannah.gnu.org/bugs/?54824.
Bug existed since version 2.9.5, commit 8b8c6bb8.
Ask ncurses for the codes for the Shift+arrow keys, so that also
<Shift+Up> and <Shift+Down> can be recognized, for which ncurses
doesn't have standard codes.
This fixes https://savannah.gnu.org/bugs/?54790.
Reported-by: Javier Valencia <javiervalencia80@gmail.com>
Move the unsetting of some options further down, to prevent the user's
nanorc enabling things that are not permitted in restricted mode.
Also, in restricted mode, suppress error messages about functions not
being present in the requested menus, so that a nanorc that is valid in
normal mode does not cause unnecessary messages when using --restricted.
This fulfills https://savannah.gnu.org/bugs/?54732.
Requested-by: Mark Webb-Johnson <mark@webb-johnson.net>
In the past, SIGWINCHes were responded to immediately (which was madness),
but since commit 75d64e67 all a SIGWINCH does is set a flag so that, when
the time comes to update the screen, nano knows the dimensions may have
changed. The mentioned commit removed most blockings and unblockings of
SIGWINCH, but not this one.
As the statusbar() function will write the position directly to the
terminal when not in curses mode, the final part of this position
message will seem to be after the prompt when exiting from nano.
The cursor position will get written correctly to the status bar
anyway, because returning from suspension enters a fake key into
the keyboard buffer, and this key elicits an update of the display.
This fixes https://savannah.gnu.org/bugs/?54639.
Reported-by: Lauri Kasanen <cand@gmx.com>
Bug existed since version 2.4.2, commit 75d64e67.
Most of these toggles just change the appearance of things, and
all of them are harmless -- none of them modify the contents of
the buffer.
This fixes https://savannah.gnu.org/bugs/?54650.
Reported-by: Liu Hao <lh_mouse@126.com>
Bug existed since version 2.9.4, commit 54103d8e.
(The offending commit meant in the previous commit was 60f1090d.
My mistake.)
When curses gives no code for Ctrl+Shift+Delete, do not fall back
to KEY_BACKSPACE, because then ^H and/or <Backspace> get bound to
'cutwordleft'.
This fixes https://savannah.gnu.org/bugs/?54642.
Bug was introduced with version 3.0, commit e6429e78.
On FreeBSD and NetBSD (when reached through ssh from a Linux machine)
this has the absurd effect of making <Ctrl+Backspace> do a 'cutwordleft'
by default, out of the box, without needing any rebindings. Weird, but
wonderful, because the ideal behavior.
Also ensure that <Shift+Delete> always does a Backspace.
This makes that we have the following set of "congruent" keys:
<Tab> moves text to the right,
<Shift+Tab> moves text to the left,
<Delete> "eats" a character to the right,
<Shift+Delete> "eats" a character to the left,
<Ctrl+Delete> "eats" a word to the right,
<Shift+Ctrl+Delete> "eats" a word to the left.
Bind the until-now unbound function 'cutwordright' to <Ctrl+Delete>.
The complementary function, 'cutwordleft', is not bound by default
because on many terminals the keystroke <Ctrl+Backspace> generates
^H -- the canonical ASCII backspace character. We cannot change the
existing action of ^H without upsetting some users.
Signed-off-by: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Signed-off-by: Benno Schulenberg <bensberg@telfort.nl>
When switching to a different buffer, don't just show its name but
also the number of lines it contains. This is useful extra info.
Then use this same message when at startup multiple files are opened
and (after reading them all) we switch back to the first buffer.
(This loses, when multiple files are opened, the information about
format conversion that nano still shows when a single file is opened,
but... this bug has shown that people don't really look at this line
anyway, so... let it be. The info can still be seen when writing out
the file with ^O.)
This addresses https://savannah.gnu.org/bugs/?54047.
Otherwise the first line of a multiline /*...*/-comment would be
seen as quoted and thus *not* as the first line of a paragraph.
In the code, use "/{2}" to prevent the remainder of the line
getting colored as a comment.
In the past, the argument could be either a regex or a literal string,
so the wording was kind of vague. But nowadays we can count on having
regex support (through gnulib), so be more precise in the description.
The tiny version contains much less code, so is less likely
to crash. And the users most likely use it for very simple
and short editing jobs, making the chance of a crash still
smaller. So the handler would just be bloat.
When 'afterends' is set and Ctrl+Right or Shift+Ctrl+Right is pressed,
nano will stop at the ends of words instead of their beginnings.
Signed-off-by: Mark-Weston <markweston@cock.li>
Signed-off-by: Benno Schulenberg <bensberg@telfort.nl>
Upon a segmentation fault or an abort signal, instead of crashing,
losing all changes, and leaving the terminal in curses mode, nano
now calls die(), to save any changed buffers and to restore the
terminal to a usable state.
For the remote chance that nano segfaults in die(), the handler for
SIGSEGV and for SIGABRT is reset to its default value as soon as the
signal fires, to prevent a crash-handler loop.
Since a core dump is usually more helpful for debugging, the crash
handler is not included in a debug build.
This addresses https://savannah.gnu.org/patch/?9623.
Signed-off-by: Devin Hussey <husseydevin@gmail.com>
Also, add a period after the "Read nn lines" message, and
don't let the next shell prompt overwrite this message.
This addresses https://savannah.gnu.org/bugs/?53779.
In the preceding commit, open_buffer() was changed so that it gets
told whether to load into a new buffer or not, so it is no longer
needed to convey this information through a flag.
This fixes a regression introduced by commit 54103d8e: a crash that
can be triggered by running 'nano --restrict' and pressing <Insert>.
This addresses https://bugzilla.redhat.com/1558532.
As, since commit 0e30177d, the scrollup and scrolldown commands
no longer intend to move the cursor, they should not be seen as
movement functions.
Also, it is not guaranteed that functions are ordered in the same
way in the binary as in the source code, so an ordered comparison
of function pointers will not always work.
This fixes https://savannah.gnu.org/bugs/?53333.
Benno Schulenberg