Input thread now signals when it has stopped and is about to return, in
case the input thread returns before the BufferChain dealloc function
would be waiting for it to terminate. Somehow, even though the Semaphore
is being signaled at this point, the BufferChain still ends up waiting
the default of 2.5 seconds for the signal that apparently never comes,
delaying file stoppage. This prevents the wait action entirely. Must
have been some sort of race condition.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This new method should cause all stops to default to immediate stoppage,
and only stops that occur after an end of track signal should indicate
to play out the entire buffer.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This magically fixes the stupid header maps that were pulling the system
semaphore.h into Swift projects, when they shouldn't have been doing
that in the first place. This is the same reason that the FLAC library
has its assert.h renamed to FLAC_assert.h.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
These imports needed to be changed so that Swift bridging didn't import
the system's semaphore.h instead of CogAudio's Semaphore.h, which is a
completely different thing.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Oops, this compare blunder resulted in DSD decimation breaking every
1024 samples or so, owing to block sizes, and caused ticking sounds as a
result. It would also cause HDCD decoding to break completely.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Neither of these two changes is really important, but they do simplify
things, and the division on that one function makes the non-decimating
DSD support actually functional, as the caller expects a specific number
of samples, and that was otherwise octupling the input sample count.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Sample rate changes will now occur on exact sample boundaries, like they
are supposed to. Also, FreeSurround accounts for its output latency.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Apparently, all these new changes with FreeSurround have pushed the
default 512KB thread stack size to the limit. And I'm not even using
stack variables, really, except for maybe the autoreleasepools.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Move the Float32 converter to a different location, for any future plans
to support decoding audio files to common data for any other purpose.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This should also seal up any potential hole for problems if there's an
audio format change and no audio buffered.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The input chain could hang up indefinitely, and MAD decoder didn't
indicate end of file properly.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
readAudio now returns an AudioChunk object directly, and all inputs have
been changed to accomodate this. Also, input and converter processing
have been altered to better work with this.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Stop output when requested, except on natural completion of the last
track in the play queue. Also fix deadlocks with stopping and
restarting.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The output now uses AVSampleBufferAudioRenderer to play all formats, and
uses that to resample. It also supports Spatial Audio on macOS 12.0 or
newer. Note that there are some outstanding bugs with Spatial Audio
support. Namely that it appears to be limited to only 192 kHz at mono or
stereo, or 352800 Hz at surround configurations. This breaks DSD64
playback at stereo formats, as well as possibly other things. This is
entirely an Apple bug. I have reported it to Apple with reference code
FB10441301 for reference, in case anyone else wants to complain that it
isn't fixed.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This code turned out to be somewhat of a mistake to employ, so it's now
being removed, and shall not be re-added, as it doesn't really work.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Add play count data collection, including first seen times for every
file first added to the playlist. Data is indexed by album, artist, and
title, or by filename, whichever matches first. Add interfaces to
AppleScript automation definition as well.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
As it doesn't seem to work properly on Intel machines, anyway. It just
leads to pointless crashes, and doesn't seem to serve any purpose.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Restrict the use of workgroup joining and workgroup intervals to macOS
Monterey or newer, as it seems the way I use it, it's completely broken
on macOS Big Sur, which was the original minimum target for the API.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Apply changes to exit the thread if workgroup initialization or joining
fails, instead of attempting to continue executing the thread.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Add an extra step to the workgroup exit call, so that it only calls to
leave if the join token is valid, or at least initialized.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The changes include no longer leaving the workgroup for seeking or for
converter format changes, and also still leaving the workgroup on thread
termination if there was an error with intervals starting or finishing.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
An impulse cache reduces any glitching from format channel count changes
to near insignificant levels, resulting in a more pleasant experience
when there are different mixed formats playing, or even a file which
changes format mid-playback.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Ensure that dynamic info updates, even on static files, only update the
exact track they apply to, by atomically assigning the userInfo property
before opening the decoder, so that callbacks to the player indicate the
correct track and don't assume it's the one that's currently visibly
playing. Fixes start of track metadata notifications from overwriting
the previously playing track.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
DFT float happens to clobber one extra sample on forward translate, so
allocate one extra for every complex buffer.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Work back to a vDSP implementation, this time using overlap-save instead
of overlap-add, also accumulating the results as complex values, only
inversing them once at the end, and finally, replacing the FFT method
with the newer DFT API.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
When leaving the workgroup, clear the token, as the join call requires
the token to be uninitialized.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Errors should stop all attempts to further use the audio thread priority
code, so there won't be debug breakpoints called on older OSes.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
As the decimator has shown to be twice as loud as it should be, the
volume should be reduced by half when converting DSD to PCM with it.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Pure downsampling is slower, but may or may not be more accurate. Though
probably not worth it. It did help me realize a minor error, though.
The decimator's volume is twice as loud as it should be.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Set baseline real-time priority for audio threads even on old macOS,
since that API is available there. Only set it once, and do not attempt
again if it fails, only once per thread.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
I'm not sure about macOS Ventura, but stable releases of macOS, at
least on Intel, require that threads joining Audio Interval
workgroups already be set to run as real-time before joining. Not
doing this results in an uncaught exception and a crash.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Now it allocates audio workgroups per thread, using work slices like the
Apple documentation describes for asynchronous threads.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
On Big Sur or newer, it is possible to join the audio threads to the
same OS workgroup as the audio output device, improving response.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Replace overlap-add vDSP/Accelerate implementation with a faster PFFFT
overlap-save implementation, using fewer FFT steps as well.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Rewrite some of the output and a lot of the downmixer to use Accelerate
framework instead of dumb for loops.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
When resampling the impulse according to the playback rate, it becomes
necessary to normalize the resulting impulse by the inverse of the
sample ratio, as resampling adds more or less loudness by virtue of
interpolating samples.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The resampler wasn't being given enough room to flush its final output,
so a function was added to determine the current output latency, and
more sample data is requested, allowing the full output flush to occur.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
These two changes fix playback issues with either starting in the middle
of the playlist on a really short file terminating immediately instead
of queueing more files (InputNode.m), and issues with starting playback
at all on the end of a playlist on a short file. (OutputCoreAudio.m)
Fixes#246
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Christopher Snowhill