We should be extrapolating right over top of the DSD decimator latency,
rather than in front of it. Yeah, that'll do.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Metadata versus properties merging, correctly merge over empty fields if
they are assigned with empty strings or zeroed numbers, instead of only
merging over completely missing fields.
Fixes emailed bug, CUE Sheet metadata reading, primarily.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The quality of the equalizer dialog is now up to par with what we had
before, minus all the crashes.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The reader should have been skipping the properties of CUE sheets when
reading the referenced data for the inner files.
Fixes#235
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Borrowing some DFT code from deadbeef, this implements a simple spectrum
visualization into the main toolbar of the app.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
For big endian sample formats, endianness can be swapped using Clang
specific byte swap functions, which are present in all supported
versions of Xcode.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Simple upmixing algorithms now use Accelerate framework functions
instead of complex loops, and the HRIR filter now supports forcing
stereo output to any channel output configuration that has at least
front stereo speakers.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Where TagLib is not being employed, use FFmpeg to read tags where
possible. This allows reading tags from files like IFF. It reads it
through properties, otherwise allowing tag readers to function like
usual.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
When decoder is redirected to the internal silence decoder, show an icon
on the playlist indicating a playback error.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This resulted in horrible things, the generic N to N upmixer was leaving
unmapped channels as uninitialized memory. This fixes horrible things
happening for people with interfaces with more channels than the source
file, frequently when the source file is stereo, or if the file is mono
and a center channel is present.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
HTTP Reader now supports limited seeking backwards even in streams, so
seek back to file start for repeated file tests, since there are at
least a few inputs that all claim to support things like Ogg containers.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
_mm_malloc and _mm_free are apparently based on intrinsic functions,
and only exist on Intel or older macOS targets. So removing them in
favor of posix_memalign.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Now the output is restarted on the current file at the current position
if the output format has changed. This should resolve the issue finally.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This was buggy as hell, and resulted in errors. Now the user should
restart playback if they change output device formats.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Sample format can now change dynamically at play time, and the player
will resample it as necessary, extrapolating edges between changes to
reduce the potential for gaps.
Currently supported formats for this:
- FLAC
- Ogg Vorbis
- Any format supported by FFmpeg, such as MP3 or AAC
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The ChunkList wasn't clearing the remover entered flag when the chain
was empty. Now it does, so it will shut down correctly.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Code ordering was wrong, it was writing the output samples repeatedly
for each input speaker, now it will only write them once.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
By applying copious amounts of autorelease pools, memory is freed in a
timely manner. Prior to this, buffer objects were freed, but not being
released, and thus accumulating in memory indefinitely, as the original
threads and functions had autorelease pools that scoped the entire
thread, rather than individual function blocks that utilized the new
buffering system. This fixes memory growth caused by playback.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This implements the basic output and mixing support for channel config
bits, optionally set by the input plugin.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The volume should have been twice what it was, because I got this scale
wrong. The correct scale for Accelerate inverse FFT is 1/4 per sample,
not 1/8 like I accidentally misread while rewriting a convolver for the
umpteenth time from scratch.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Rewrite attempt number two. Now using array lists of audio chunks, with
each chunk having its format and optionally losslessness stashed along
with it. This replaces the old virtual ring buffer method. As a result
of this, the HRIR toggle now works instantaneously.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
After all this rewriting, down or upmixing the audio is now handled with
the lowest latency possible, meaning that toggling the HRIR option now
takes effect immediately.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This is a fixed point implementation identical to Microsoft's original
algorithm. Or at least I assume it's Microsoft's. It was actually
adapted from hdcd_decode.exe, which was adapted from somewhere else.
It's entirely in fixed point math now, so it's fairly deterministic.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The end of input queueing, which can go nuts when there are a lot of
short files, should be terminated when the user asks the player to stop.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Flush the resampler when the source file terminates, so that it outputs
delayed samples properly. This fixes gapless decoding of resampled
files.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Replace individual virtual buffers with large _mm_malloc blocks at a
time, then dole out chunks of those buffers as the nodes need them.
Should reduce memory contention a little bit.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This seals up a major memory leak of the playback state whenever a chain
is released on stop or on manual track change. CogAudioMulti was
retaining the input node due to its listeners, and InputNode was not
releasing the listeners when asked to stop running. This is fixed now.
Fixes#221
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Added a logging method that indicates starting playback of a given URL,
and added a debug build only logging of every metadata load event.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
7.0 downmix was passing parameters to cblas_scopy backwards, and WAV
files report "host" endian, not "native".
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The thread wait on shutdown had the potential to lock up waiting for the
thread to shut down. Now it should at least spam the semaphores, so that
the thread should progress to shutdown a lot quicker.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Add a safety fix for pausing and shutting down, so that we don't call
into AUAudioUnit's stopHardware function unless the stream has already
been started by the output.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This should fix some coding issues, and also fix some potential memory
leaks in the file verifier, assuming it didn't already release the
files it was pulling the stats from.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
The filter wasn't properly freeing its FFT setup state, and also was
unnecessarily null checking the pointers before passing them to the
aligned free function, which already does null checking.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Reduce the timing at which an end of file notification is sent to the
main thread from 16384 bytes to 8192 bytes. This may help with playback
of a lot of really small files, and skipping tracks.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
Implement the ability to configure and select an HRIR preset to use with
the HRIR filter, or remove the preset. It will validate the file's
usefulness before setting it for the player to use.
Also, fixed back center channel filtering for 7.0 format audio.
Signed-off-by: Christopher Snowhill <kode54@gmail.com>
This is needed for HeSuVi no-echo impulses, which are only one channel
per input channel, and mapping uses symmetrical mirroring of the input
set to create the surround effect, since there's no side-to-side delay
in these impulses.
This new virtualizer uses the Accelerate framework to process samples.
I've bundled a HeSuVi impulse for now, and will add an option to select
an impulse in the future. It will validate the selection before sending
it to the actual filter, which outright fails if it receives invalid
input. Impulses will be supported in any arbitrary format that Cog
supports, but let's not go too hog wild, it requires HeSuVi 14 channel
presets.
Christopher Snowhill