2023-10-06 01:12:52 +00:00
|
|
|
#!/usr/bin/env sh
|
|
|
|
|
# SPDX-License-Identifier: GPL-3.0-or-later
|
|
|
|
|
# SPDX-FileCopyrightText: 2014,2015,2020,2021,2023 Leah Rowe <leah@libreboot.org>
|
|
|
|
|
# SPDX-FileCopyrightText: 2015 Patrick "P. J." McDermott <pj@pehjota.net>
|
|
|
|
|
# SPDX-FileCopyrightText: 2015, 2016 Klemens Nanni <contact@autoboot.org>
|
|
|
|
|
# SPDX-FileCopyrightText: 2022, Caleb La Grange <thonkpeasant@protonmail.com>
|
|
|
|
|
|
|
|
|
|
set -u -e
|
|
|
|
|
|
|
|
|
|
. "include/err.sh"
|
|
|
|
|
. "include/option.sh"
|
|
|
|
|
|
lbmk: export TMPDIR from err.sh, not build
lbmk sets TMPDIR to /tmp, and then creates a tmpdir, then
exports *that* as the value of TMPDIR. this unified TMPDIR
location then contains all subsequent files and directories,
when any script or program makes use of /tmp, via mktemp. at
least, that's the theory!
in practise, because it was only being properly exported from
the main build scripts, subscripts that are then called were
not exporting it, at least that is my assumption because in
some cases, i found that the coreboot build system was leaving
errant files behind outside of our own TMPDIR, and that build
system did not seem to be setting TMPDIR itself; more debugging
is needed.
anyway: use the exact same logic, but do it from err.sh. since
err.sh is included from every lbmk script, that means it will
always be exported when running every single part of lbmk. this
should reduce the chance that mktemp creates files and directories
outside of our custom TMPDIR location.
this is because in lbmk, we mitigate unhandled tmpdirs/files by
unifying it in the manner described, then deleting the entire
TMPDIR on exit from the main lbmk parent process (the main
script that the user called from, which is always the "build"
file).
in lbmk, effort is made to clean up temporary files properly,
without relying on this catch-all, but we can't rely on that.
the catch-all should also be as robust as possible.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-25 18:08:53 +00:00
|
|
|
eval "$(setvars "" option aur_notice)"
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
err="fail"
|
2023-10-07 01:06:33 +00:00
|
|
|
|
2023-10-06 01:12:52 +00:00
|
|
|
linkpath="${0}"
|
|
|
|
|
linkname="${linkpath##*/}"
|
|
|
|
|
buildpath="./script/${linkname}"
|
|
|
|
|
|
|
|
|
|
main()
|
|
|
|
|
{
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
x_ id -u 1>/dev/null 2>/dev/null
|
|
|
|
|
[ $# -lt 1 ] && $err "Too few arguments. Try: ${0} help"
|
2023-10-06 01:12:52 +00:00
|
|
|
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
[ "$1" = "dependencies" ] && x_ install_packages $@ && lbmk_exit 0
|
2023-10-06 01:12:52 +00:00
|
|
|
|
2023-12-23 16:16:26 +00:00
|
|
|
for cmd in initcmd check_git check_project git_init excmd; do
|
|
|
|
|
eval "${cmd} \$@"
|
|
|
|
|
done
|
2023-10-06 01:12:52 +00:00
|
|
|
lbmk_exit 0
|
|
|
|
|
}
|
|
|
|
|
|
2023-12-23 16:16:26 +00:00
|
|
|
initcmd()
|
2023-10-06 01:12:52 +00:00
|
|
|
{
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
[ "$(id -u)" != "0" ] || $err "this command as root is not permitted"
|
2023-10-06 01:12:52 +00:00
|
|
|
|
2023-11-08 06:05:49 +00:00
|
|
|
check_project
|
|
|
|
|
|
2023-10-19 23:17:30 +00:00
|
|
|
case "${1}" in
|
2023-12-19 02:51:33 +00:00
|
|
|
help) usage ${0} ;;
|
|
|
|
|
list) items "${buildpath}" ;;
|
|
|
|
|
version) mkversion ;;
|
|
|
|
|
*)
|
|
|
|
|
option="${1}"
|
|
|
|
|
return 0 ;;
|
2023-10-19 23:17:30 +00:00
|
|
|
esac
|
2023-12-19 02:51:33 +00:00
|
|
|
lbmk_exit 0
|
2023-10-06 01:12:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
install_packages()
|
|
|
|
|
{
|
|
|
|
|
if [ $# -lt 2 ]; then
|
|
|
|
|
printf "You must specify a distro, namely:\n" 1>&2
|
|
|
|
|
printf "Look at files under config/dependencies/\n" 1>&2
|
|
|
|
|
printf "Example: ./build dependencies debian\n" 1>&2
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
$err "install_packages: target not specified"
|
2023-10-06 01:12:52 +00:00
|
|
|
fi
|
|
|
|
|
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
[ -f "config/dependencies/${2}" ] || $err "Unsupported target"
|
2023-10-06 01:12:52 +00:00
|
|
|
|
|
|
|
|
. "config/dependencies/${2}"
|
|
|
|
|
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
x_ ${pkg_add} ${pkglist}
|
2023-10-19 23:17:30 +00:00
|
|
|
[ -z "${aur_notice}" ] && return 0
|
2023-12-24 09:04:36 +00:00
|
|
|
printf "You must install AUR packages: %s\n" "$aur_notice" 1>&2
|
2023-10-06 01:12:52 +00:00
|
|
|
}
|
|
|
|
|
|
2023-10-20 20:10:26 +00:00
|
|
|
# release archives contain .gitignore, but not .git.
|
|
|
|
|
# lbmk can be run from lbmk.git, or an archive.
|
|
|
|
|
git_init()
|
|
|
|
|
{
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
[ -L ".git" ] && $err "Reference .git is a symlink"
|
2023-10-20 20:10:26 +00:00
|
|
|
[ -e ".git" ] && return 0
|
|
|
|
|
eval "$(setvars "$(date -Rd @${versiondate})" cdate _nogit)"
|
|
|
|
|
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
git init || $err "${PWD}: cannot initialise Git repository"
|
|
|
|
|
git add -A . || $err "${PWD}: cannot add files to Git repository"
|
2023-11-09 16:31:40 +00:00
|
|
|
git commit -m "${projectname} ${version}" --date "${cdate}" \
|
|
|
|
|
--author="lbmk <lbmk@libreboot.org>" || \
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
$err "$PWD: can't commit ${projectname}/${version}, date $cdate"
|
2023-10-20 20:10:26 +00:00
|
|
|
git tag -a "${version}" -m "${projectname} ${version}" || \
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
$err "${PWD}: cannot git-tag ${projectname}/${version}"
|
2023-10-20 20:10:26 +00:00
|
|
|
}
|
|
|
|
|
|
2023-12-23 16:16:26 +00:00
|
|
|
excmd()
|
2023-10-06 01:12:52 +00:00
|
|
|
{
|
2023-10-19 23:17:30 +00:00
|
|
|
lbmkcmd="${buildpath}/${option}"
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
[ -f "${lbmkcmd}" ] || $err "Invalid command. Run: ${linkpath} help"
|
|
|
|
|
shift 1; "$lbmkcmd" $@ || $err "excmd: ${lbmkcmd} ${@}"
|
2023-10-06 01:12:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
usage()
|
|
|
|
|
{
|
|
|
|
|
progname=${0}
|
|
|
|
|
cat <<- EOF
|
2023-11-08 06:17:40 +00:00
|
|
|
$(mkversion)
|
|
|
|
|
|
2023-10-19 23:17:30 +00:00
|
|
|
USAGE: ${progname} <OPTION>
|
2023-10-06 01:12:52 +00:00
|
|
|
|
2023-10-19 23:17:30 +00:00
|
|
|
possible values for 'OPTION':
|
2023-10-19 22:36:56 +00:00
|
|
|
$(items "${buildpath}")
|
2023-10-06 01:12:52 +00:00
|
|
|
|
2023-11-09 16:40:36 +00:00
|
|
|
To know what ${projectname} version you're on, type:
|
2023-11-08 06:17:40 +00:00
|
|
|
${progname} version
|
|
|
|
|
|
2023-10-07 01:36:46 +00:00
|
|
|
Refer to ${projectname} documentation for more info.
|
2023-10-06 01:12:52 +00:00
|
|
|
EOF
|
|
|
|
|
}
|
|
|
|
|
|
2023-11-08 06:17:40 +00:00
|
|
|
mkversion()
|
|
|
|
|
{
|
2023-12-24 09:04:36 +00:00
|
|
|
printf "revision: %s %s\n" "$projectname" "$version"
|
2023-11-08 06:17:40 +00:00
|
|
|
printf "revision date: %s\n" "$(date -Rud @${versiondate})"
|
|
|
|
|
}
|
|
|
|
|
|
2023-10-06 01:12:52 +00:00
|
|
|
lbmk_exit()
|
|
|
|
|
{
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
tmp_cleanup || err_ "lbmk_exit: can't rm tmpdir upon exit $1: $tmpdir"
|
2023-10-06 01:12:52 +00:00
|
|
|
exit $1
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
fail()
|
|
|
|
|
{
|
2023-12-24 09:04:36 +00:00
|
|
|
tmp_cleanup || printf "WARNING: can't rm tmpdir: %s\n" "$tmpdir" 1>&2
|
safer, simpler error handling in lbmk
in shell scripts, a function named the same as a program included in
the $PATH will override that program. for example, you could make a
function called ls() and this would override the standand "ls".
in lbmk, a part of it was first trying to run the "fail" command,
deferring to "err", because some scripts call fail() which does
some minor cleanup before calling err.
in most cases, fail() is not defined, and it's possible that the user
could have a program called "fail" in their $PATH, the behaviour of
which we could not determine, and it could have disastrous effects.
lbmk error handling has been re-engineered in such a way that the
err function is defined in a variable, which defaults to err_ which
calls err_, so defined under include/err.sh.
in functions that require cleanup prior to error handling, a fail()
function is still defined, and err is overridden, thus:
err="fail"
this change has made xx_() obsolete, so now only x_ is used. the x_
function is a wrapper that can be used to run a command and exit with
non-zero status (from lbmk) if the command fails. the xx_ command
did the same thing, but called fail() which would have called err();
now everything is $err
example:
rm -f "$filename" || err "could not delete file"
this would now be:
rm -f "$filename" || $err "could not delete file"
overriding of err= must be done *after* including err.sh. for
example:
err="fail"
. "include/err.sh"
^ this is wrong. instead, one must do:
. "include/err.sh"
err="fail"
this is because err is set as a global variable under err.sh
the new error handling is much cleaner, and safer. it also reduces
the chance of mistakes such as: calling err when you meant to
call fail. this is because the standard way is now to call $err,
so you set err="fail" at the top of the script and all is well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|
|
|
err_ "${1}"
|
2023-10-06 01:12:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
tmp_cleanup()
|
|
|
|
|
{
|
|
|
|
|
[ "${tmpdir_was_set}" = "n" ] || return 0
|
|
|
|
|
rm -Rf "${tmpdir}" || return 1
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
main $@
|