lbmk/config/coreboot/macbook11_16mb/target.cfg

tree="i945"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
grub_scan_disk="ahci"
status="untested"
i945: switch boards to 20230625 coreboot revision On T60 with Libreboot 20231106 and the GRUB payload, a user reported this error in GRUB when a battery was connected: "alloc magic is broken at 0x7b1aedf0: 0" This error disappears when a battery is not connected, or when using Libreboot 20230625. The issue has persisted through to LIbreboot 20240225 and after, and I believe the issue will be somewhere in coreboot, not in GRUB itself. For now, switch i945 laptops (X60, T60, Macbook2,1) back to the February 2023 coreboot revision used in Libreboot 20230625. A bisect can be done before the next Libreboot release, ETA May 2024, if time permits. Otherwise, this revert should solve the problem for now, at least so far as Libreboot is concerned. The following coreboot patches have been backported: commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94 Author: Bill Xie <persmule@hardenedlinux.org> Date: Sat Oct 7 01:32:51 2023 +0800 drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume Further patches from upstream: commit 432e92688eca0e85cbaebca3232f65936b305a98 Author: Bill Xie <persmule@hardenedlinux.org> Date: Fri Nov 3 12:34:01 2023 +0800 drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum These patches fixed S3 on GM45 machines, though it will be useful on the i945 machines aswell. The reason I'm doing it this way it is because I don't have a battery for my X60 or T60, and my T60 isn't in a very good state either, so I can't reproduce the error myself yet. Signed-off-by: Leah Rowe <leah@libreboot.org> 2024-04-26 08:37:01 +00:00			`tree="i945"`
update/trees: further simplify crossgcc handling arch no longer needs to be set, on multi-tree projects, and it has been renamed to xarch the new behaviour is: if xarch is set, treat it as a list of crossgcc targets and go through the list. set the first one as the target, for what lbmk builds, but build all of the defined crossgccc targets crossgcc_ada is now xlang, and defines which languages to build, rather than whether to build gcc-gnat Signed-off-by: Leah Rowe <leah@libreboot.org> 2023-12-27 15:18:21 +00:00			`xarch="i386-elf"`
libreboot! this is forked from the "libre" branch in osboot, which is itself a libre, deblobbed fork of osboot, a blobbed up fork of libreboot libreboot needed to be purged clean. this is the new libreboot development repository. the old one has been abandoned 2021-05-18 12:56:12 +00:00			`payload_grub="y"`
			`payload_grub_withseabios="y"`
			`payload_seabios="y"`
apple/macbook21: set grub_scan_disk to ahci 2021-12-29 07:14:22 +00:00			`grub_scan_disk="ahci"`
build/roms: report status when building images export LBMK_VERSION_TYPE=x x can be: stable, unstable in target.cfg files, specify: status=x x can be: stable, unstable, broken, untested if unset, lbmk defaults to "unknown" if LBMK_VERSION_TYPE is set, no confirmation is asked if the given target matches what's set (but what's set in that environmental variable can only be stable or unstable) if LBMK_RELEASE="y", no confirmation is asked, unless the target is something other than stable/unstable "unstable" means it works, but has a few non-breaking bugs, e.g. broken s3 on dell e6400 whereas, if raminit regularly fails or it is so absolutely unreliable as to be unusable, then the board should be declared "broken" untested means: it has not been tested With this change, it should now be easier to track whether a given board is tested, in preparation for releases. When working on trees/boards, status can be set for targets. Also: in the board directory, you can add a "warn.txt" file which will display a message. For example, if a board has a particular quirk to watch out for, write that there. The message will be printed during the build process, to stdout. If status is anything other than stable, or it is unstable but LBMK_VERSION_TYPE is not set to "unstable", and not building a release, a confirmation is passed. If the board is not specified as stable or unstable, during a release build, the build is skipped and the ROM is not provided in that release; this is in addition to release="n" or release="y" that can be set in target.cfg, which will skip the release build for that target if "n" Signed-off-by: Leah Rowe <leah@libreboot.org> 2024-04-26 18:41:00 +00:00			`status="untested"`