lbmk/script/trees

306 lines
8.3 KiB
Plaintext
Raw Normal View History

#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# Copyright (c) 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# Copyright (c) 2023-2024 Leah Rowe <leah@libreboot.org>
set -u -e
. "include/lib.sh"
. "include/git.sh"
cbmakeargs="UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS"
eval `setvars "" xarch cdir config cmakedir xlang mode makeargs elfdir xtree \
project target target_dir targets tree _f target1 bootstrapargs mkhelper \
autoconfargs config_name listfile autogenargs btype`
main()
{
while getopts f:b:m:u:c:x:s:l:n: option; do
[ -n "$_f" ] && $err "only one flag is permitted"
_f="$1"
case "$1" in
-b) mode="" ;;
-u) mode="oldconfig" ;;
-m) mode="menuconfig" ;;
-c) mode="distclean" ;;
-x) mode="crossgcc-clean" ;;
-f) mode="fetch" ;;
-s) mode="savedefconfig" ;;
-l) mode="olddefconfig" ;;
-n) mode="nconfig" ;;
*) $err "invalid option '-$option'" ;;
esac
[ -n "${OPTARG+x}" ] || $err "OPTARG not set"
project="${OPTARG#src/}"; shift 2
done
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
[ -z "$_f" ] && $err "missing flag (-m/-u/-b/-c/-x/-f/-s/-l/-n)"
[ -z "$project" ] && $err "project name not specified"
[ -f "config/git/$project/pkg.cfg" ] || $err "'$project' not defined"
elfdir="elf/$project"
datadir="config/data/$project"
cfgsdir="config/$project"
listfile="$datadir/build.list" # needed on multi, optional on single
remkdir "${tmpgit%/*}"
_cmd="build_targets" && singletree "$project" && _cmd="build_project"
$_cmd $@
[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && return 0
[ -f "$listfile" ] || return 0
[ -z "$mode" ] && printf "\n\nOK! Check %s/\n\n" "$elfdir"; return 0
}
build_project()
{
if [ "$mode" = "fetch" ]; then
[ -f "CHANGELOG" ] && return 0
fetch_project_repo; return 0
fi
load_project_config "$cfgsdir" 0 || return 0
[ -f "$listfile" ] || listfile="" # optional on single-tree
dest_dir="$elfdir"
[ ! -f "$listfile" ] || elfcheck || return 0
cdir="src/${project}"
x_ ./update trees -f "$project"
[ "$mode" = "distclean" ] && mode="clean"
run_make_command || return 0
[ -n "$mode" ] || copy_elf; return 0
}
build_targets()
{
[ "$elfdir" = "elf/coreboot" ] && elfdir="$cbelfdir"
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
[ -d "$cfgsdir" ] || $err "directory, $cfgsdir, does not exist"
[ -f "$listfile" ] || $err "list file, $listfile, does not exist"
# Build for all targets if no argument is given
[ $# -gt 0 ] && target1="$1"
[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && shift 1
targets="$(ls -1 "$cfgsdir")" || $err "Can't get options for $cfgsdir"
[ $# -gt 0 ] && targets=$@
handle_targets
}
handle_targets()
{
for x in $targets; do
target="$x"
printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target"
[ "$project" != "coreboot" ] || [ -n "$mode" ] || \
[ "$target1" = "utils" ] || x_ ./vendor download $target
x_ handle_defconfig
done
}
handle_defconfig()
{
handle_src_tree "$target" || return 0
[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && \
eval "check_coreboot_utils \"$tree\"; return 0"
for y in "$target_dir/config"/*; do
[ -f "$y" ] || continue
config="$y"
config_name="${config#"$target_dir/config/"}"
[ -n "$mode" ] || check_config || continue
handle_makefile
[ -n "$mode" ] || copy_elf
done
}
handle_src_tree()
{
target_dir="$cfgsdir/$target"
if [ "$mode" = "fetch" ]; then
[ -f "CHANGELOG" ] && return 1
fetch_project_trees; return 1
fi
load_project_config "$target_dir" || return 1
x_ mkdir -p "$elfdir/$target"
chkvars tree
cdir="src/$project/$tree"
if [ ! -d "$cdir" ]; then
if [ "$mode" = "distclean" ] || \
[ "$mode" = "crossgcc-clean" ]; then
printf "Directory %s missing; skip\n" "$cdir" 1>&2
return 1
fi
x_ ./update trees -f "$project" "$target"
fi
[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && return 0
[ -z "$mode" ] && check_cross_compiler; return 0
}
load_project_config()
{
eval `setvars "" xarch xlang tree bootstrapargs autoconfargs xtree \
tree_depend makeargs btype mkhelper`
[ -f "$1/target.cfg" ] || btype="auto"
# target.cfg optional on single-tree so return if missing.
# target.cfg mandatory on multi-tree so err if missing.
_setcfgarg="" && [ $# -gt 1 ] && _setcfgarg="$2"
eval `setcfg "$1/target.cfg" $_setcfgarg`
[ -z "$btype" ] || [ "${mode%config}" = "$mode" ] || \
return 1; return 0
}
check_cross_compiler()
{
for _xarch in $xarch; do
cbdir="src/coreboot/$tree"
[ "$project" != "coreboot" ] && cbdir="src/coreboot/default"
[ -n "$xtree" ] && cbdir="src/coreboot/$xtree"
x_ ./update trees -f coreboot ${cbdir#src/coreboot/}
export PATH="$PWD/$cbdir/util/crossgcc/xgcc/bin:$PATH"
export CROSS_COMPILE="${xarch% *}-"
[ -n "$xlang" ] && export BUILD_LANGUAGES="$xlang"
# sometimes buildgcc fails for like no reason. try twice.
make -C "$cbdir" crossgcc-${_xarch%-*} $cbmakeargs || \
make -C "$cbdir" crossgcc-${_xarch%-*} $cbmakeargs || \
$err "!mkxgcc $project/$xtree '${_xarch%-*}' '$cbmakeargs'"
done; return 0
}
check_coreboot_utils()
{
for util in cbfstool ifdtool; do
utilelfdir="elf/$util/$1"
utilsrcdir="src/coreboot/$1/util/$util"
utilmode=""
[ -z "$mode" ] || utilmode="clean"
x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $cbmakeargs
[ -z "$mode" ] && [ ! -f "$utilelfdir/$util" ] && \
x_ mkdir -p "$utilelfdir" && \
x_ cp "$utilsrcdir/$util" "elf/$util/$1"
[ -z "$mode" ] || x_ rm -Rf "$utilelfdir"
done
}
check_config()
{
[ -f "$config" ] || $err "check_config $project/$target: no config"
dest_dir="$elfdir/$target/$config_name"
elfcheck || return 1 # skip build if a previous one exists
x_ mkdir -p "$dest_dir"
}
elfcheck()
{
# TODO: very hacky check. do it properly (based on build.list)
for elftest in "$dest_dir"/*; do
[ -e "$elftest" ] && e "$elftest" f && return 1
done; return 0
}
handle_makefile()
{
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
check_makefile "$cdir" && x_ make clean -C "$cdir"
x_ cp "$config" "$cdir/.config"
[ -n "$mode" ] || [ -n "$btype" ] || make -C "$cdir" \
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
silentoldconfig || make -C "$cdir" oldconfig || :
run_make_command || $err "handle_makefile $cdir: no makefile!"
_copy=".config"
[ "$mode" = "savedefconfig" ] && _copy="defconfig"
[ "${mode%config}" = "$mode" ] || x_ cp "$cdir/$_copy" "$config"
[ -e "$cdir/.git" ] && [ "$project" = "u-boot" ] && \
[ "$mode" = "distclean" ] && x_ git -C "$cdir" clean -fdx; return 0
}
run_make_command()
{
check_cmake "$cdir" && [ -z "$mode" ] && check_autoconf "$cdir"
check_makefile "$cdir" || return 1
[ "$project" = "coreboot" ] && [ -z "$mode" ] && x_ \
printf "%s\n" "${version%%-*}" > "$cdir/.coreboot-version" \
&& makeargs="$makeargs $cbmakeargs"
make -C "$cdir" $mode -j$XBMK_THREADS $makeargs || $err "$cdir mk$mode"
[ -z "$mkhelper" ] || [ -n "$mode" ] || $mkhelper || \
$err "$cdir: helper command failed: $mkhelper" # eg mkpayload_grub
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
[ "$mode" != "clean" ] && return 0
make -C "$cdir" distclean 2>/dev/null || :
}
check_cmake()
{
[ -z "$cmakedir" ] || check_makefile "$1" || cmake -B "$1" \
"$1/$cmakedir" || check_makefile "$1" || $err "$1: !cmk $cmakedir"
[ -z "$cmakedir" ] || check_makefile "$1" || \
$err "check_cmake $1: can't generate Makefile"; return 0
}
check_autoconf()
{
(
cd "$1" || $err "!cd $1"
[ -f "bootstrap" ] && x_ ./bootstrap $bootstrapargs
[ -f "autogen.sh" ] && x_ ./autogen.sh $autogenargs
[ -f "configure" ] && x_ ./configure $autoconfargs; return 0
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
) || $err "can't bootstrap project: $1"
}
check_makefile()
{
[ -f "$1/Makefile" ] || [ -f "$1/makefile" ] || \
[ -f "$1/GNUmakefile" ] || return 1; return 0
}
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
mkpayload_grub()
{
eval `setvars "" grub_modules grub_install_modules`
eval `setcfg "$grubdata/module/$tree"`
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
x_ rm -f "$cdir/grub.elf"
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
"${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \
-O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \
--fonts= --themes= --locales= --modules="$grub_modules" \
--install-modules="$grub_install_modules" \
"/boot/grub/grub_default.cfg=${cdir}/.config" \
"/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
"/background.png=$grubdata/background/background1280x800.png" || \
$err "$tree: cannot build grub.elf"; return 0
make GRUB multi-tree and re-add xhci patches Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:01:30 +00:00
}
copy_elf()
{
[ -f "$listfile" ] && x_ mkdir -p "$dest_dir" && while read -r f; do
[ -f "$cdir/$f" ] && x_ cp "$cdir/$f" "$dest_dir"
done < "$listfile"
x_ make clean -C "$cdir"
much, much stricter, more verbose error handling lbmk is much more likely to crash now, in error conditions, which is a boon for further auditing. also: in "fetch", remove the downloaded program if fail() was called. this would also be done for gnulib, when downloading grub, but done in such a way that gnulib goes first. where calls to err write "ERROR" in the string, they no longer say "ERROR" because the "err" function itself now does that automatically. also: listmodes/listoptions (in "lbmk") now reports an error if no scripts and/or directories are found. also: where a warning is given, but not an error, i've gone through in some places and redirected the output to stderr, not stdout as part of error checks: running anything as root, except for the "./build dependencies *" commands, is no longer permitted and lbmk will throw an error mrc downloads: debugfs output no longer redirected to /dev/null, and stderr no longer redirected to stdout. everything is verbose. certain non-error states are also more verbose. for example, patch_rom in blobs/inject will now state when injection succeeds certain actual errors(bugs) were fixed: for example, build/release/roms now correctly prepares the blobs hash files for a given target, containing only the files and checksums in the list. Previously, a printf message was included. Now, with this new code: blobutil/inject rightly verifies hashes. doing all of this in one giant patch is cleaner than 100 patches changing each file. even this is yet part of a much larger audit going on in the Libreboot project. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-24 19:19:41 +00:00
}
main $@