also: the grub-mkstandalone command didn't have
a || at the end, even though it did specify an err
call. This has been corrected, so that the command
now defers to err() under fault conditions.
Signed-off-by: Leah Rowe <leah@libreboot.org>
This results in much cleaner copyright and license declarations.
SPDX headers are legally recognised and make auditing easier.
Also, remove descriptions of each script, from each script.
Libreboot documentation at docs/maintain/ describes them.
Signed-off-by: Leah Rowe <leah@libreboot.org>
moved cmake files into a separate build directory.
this can just be deleted for the source release.
might as well use cmake for the actual build too.
that makes repeated builds faster for some reason.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
the builds were being created within that srcdir,
because build/release/src runs lbmk commands within
it, and one of them is building (re-building) it.
there's no point addressing this, other than rm -Rf
Signed-off-by: Leah Rowe <leah@libreboot.org>
the main lbmk script already creates these files,
and these files are then copied by build/release/src
so we don't need to re-create them here
Signed-off-by: Leah Rowe <leah@libreboot.org>
there were a few missing err calls
i actually went through all of lbmk and found no
instances where err calls were missing except in
build/boot/roms_helper
Signed-off-by: Leah Rowe <leah@libreboot.org>
if you copy a symlink, you create a whole new file with the
contents of what that symlink points to.
what we need to do instead is re-create the symlinks. this
is relevant for all symlinks to the main lbmk script, from
the main directory of lbmk.git.
this avoids there being multiple copies of the main lbmk
script, in release archives.
Signed-off-by: Leah Rowe <leah@libreboot.org>
in some cases, messages that should be considered errors
or warnings, were being written to the standard output,
rather than written as error messages.
also: one or two printf statements should specifically
avoid printing errors (to any file); in these cases,
stdout has been redirected to /dev/null
Signed-off-by: Leah Rowe <leah@libreboot.org>
sha-1 has known collision issues, which may not be readily
exploitable yet (in our context), but we should ideally use
a more secure method for checking file integrity.
therefore, use sha-2 (sha512sum) for checking files. this is
slower than sha-1, but checksum verification is only a minor
part of what lbmk does, so the overall effect on build times
is quite negligible.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Tested on a Nucleo-F042K6.
That has an onboard stlink:
`st-flash --format ihex write bin/serprog_stm32/serprog_nucleo-f042k6.hex`
The usb port used for flashing is separate, its is exposed on
the pin header instead. Check boards/nucleo-f042k6.h for usb pinout.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
where it is set to "both" (grub_scan_disk), inserting
scan.cfg is superfluous, because grub.cfg defaults to
both anyway, unless otherwise specified by scan.cfg,
and only if that file exists within cbfs.
thus, save a bit of build time (only a slight saving)
Signed-off-by: Leah Rowe <leah@libreboot.org>
target.cfg can now specify e.g.
grub_timeout=20
this would then be inserted as timeout.cfg in cbfs,
containing the instruction:
set timeout=20
HP laptops need a bit of extra time, due to the delay
caused by the EC bug workaround deployed in GRUB
desktops in general need extra time. this too is set to
10s, like the HP laptops.
only insert timeout.cfg if actually needed (declared in
target.cfg), otherwise grub.cfg will default to 5s
Signed-off-by: Leah Rowe <leah@libreboot.org>
we must conserve memory usage, in the event that the
user's /tmp is a tmpfs. copying of ROM images into
tmpfs is ill advised; we must copy them, due to how
the release process works (e.g. stripping of blobs,
but this must be done in a way so as to not interfere
with regular builds, thus they are copied instead)
Signed-off-by: Leah Rowe <leah@libreboot.org>
now under coreboot mainboards, target.cfg can specify
a background. if not specified, the 1280x800 one is
assumed, and used by default. it can be overridden.
the path should be relative to:
config/grub/background/
Signed-off-by: Leah Rowe <leah@libreboot.org>
also: only return zero status if rom images were succesfully
built, and print a list of each rom image directory based on
what was actually compiled, rather than just saying that the
rom images are stored under bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
it doesn't really make sense for them to be under
blobs/ - nominally, they are blobs, but they are
well-understood data files containing config data,
that is easily parsed by tools like ich9show or
ifdtool (and tools like bincfg or nvmutil)
blobs/ has been re-purposed: this directory no longer
exists in lbmk, but it is created (and on .gitignore)
when needed, by blobutil
thus, the blobs/ directory shall only contain vendor
files, and only those files that libreboot scrubs from
releases. therefore, build/release/src can (and has
been) simplified; it currently copies just the ifd and
gbe files from blobs/, selectively, and this logic is
quite error prone, requiring maintenance. now, the
build/release/src script simply copies config/ (which
only ever contains distributable files) and entirely
ignores the blobs/ directory
the blob download script already creates the required
directory, except for the sch5545 download; this is
now fixed
lbmk code size is slightly smaller, due to this patch
Signed-off-by: Leah Rowe <leah@libreboot.org>
This cuts down on build time, and it will allow libreboot
to remove large chunks of code.
these ifd/gbe configs are just binary-encoded config files,
in a format well-understood. they can easily be opened up
and displayed, using ich9show or ifdtool, and manipulated
by these tools; bincfg can generate them from scratch, and
nvmutil can change mac addresses, for example.
so, do this and remove from lbmk the following:
* ich9utils (which contains ich9gen) - not needed anymore
* code in lbmk for handling ich9gen and insertions; the
coreboot build system is now used, for this same purpose,
so remove such code from lbmk
this results in a massive code size reduction (thousands of
lines) in lbmk; smaller when only looking at the build
system, but much larger when you consider that ich9utils
is also removed (about 3k sloc)
Signed-off-by: Leah Rowe <leah@libreboot.org>
a follow-up patch will make use of these, rather than ich9gen,
and ich9gen will be deleted.
these files were in fact generated *by* ich9gen.
coreboot has ifdtool and bincfg, the latter of which can
generate both ifd and gbe files for ich9m. that, and nvmutil
which is part of libreboot, can change gbe mac addresses.
i was going to replace ich9gen with a script that would run
bincfg, ifdtool and nvmutil, to greatly reduce code size,
because ich9gen is about 3k sloc.
however, in practise we would always generate the same ifd
config, and basically only change the mac address if that's
what the user wants; nvmutil can already do that just fine.
so, just include the binaries directly.
Signed-off-by: Leah Rowe <leah@libreboot.org>
More than 90% of cats were thus terminated.
read (shell built-in) is better at reading, and dogs are better pets.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
the way this script works, it only copies what was built,
but it currently operatios as though coreboot/default
always exists, and then cleans the kbc1126 util
this patch fixes such buggy behaviour
Signed-off-by: Leah Rowe <leah@libreboot.org>
The -c option is added for distclean, and -x for crossgcc-clean,
in handle/make/config
about 100 sloc removed from lbmk
Signed-off-by: Leah Rowe <leah@libreboot.org>
The -T option specifies how many threads xz shall use.
The -T value of zero shall dictate that xz use so many
threads as there are CPUs, on the host system.
This will probably speed up the release process a bit.
Signed-off-by: Leah Rowe <leah@libreboot.org>
The same ROM images that you flash on Intel GPU variants,
are now flashed on Nvidia models. The same ROM will work
on both. If an Intel GPU variant is present, libgfxinit
is used, and the VGA ROM is used if an Nvidia GPU variant;
however, release ROMs will scrub the nvidia option ROM,
so release ROMs will only work on Intel GPUs unless you
run the blobutil inject command.
I decided to no longer have this under WIP, but to put
it in master. The issue with it pertains to video drivers,
which is not Libreboot's problem.
Nouveau crashes under Linux, so use "nomodeset" if it does.
The "nv" drivers in BSD systems work very well.
The nvidia model of E6400 isn't recommended for other
reasons, namely: poor thermal cooling (thermal pad on
the GPU) and that Nvidia GPU doesn't get very good
performance on any libre drivers anyway. The Intel GPU
variant is better, in terms of power efficiency and
software support; the intel variant also works with
native graphics initialisation in coreboot.
This board port already only enables SeaBIOS, which will
simply execute the VGA ROM. Blobutil already supports
reading the config, detecting that a VGA ROM is needed,
because that part of the WIP E6400 branch was already
merged in lbmk master.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Leah Rowe