previously, "normal" initmode relied on the vgarom-based
seabios config, which enables option roms, but then lbmk
would insert pci-optionrom-exec 0 for vgarom, and 2 for normal
in libreboot, coreboot roms with "vgarom" in the filename do
pci option rom execution from coreboot, and "normal" roms
do execution from seabios(where seabios is the only payload
provided on normal setups)
this is because payloads like grub can also be used, on vgarom
setups, where coreboot must handle oprom execution
the deleted patch (in this commit) was written to fix an
issue theoretically; it hasn't been fully tested, and some
people have reported strange issues since this patch was
merged - there is no proof that this patch causes them, but
removing this patch is the correct thing to do regardless
i downloaded this file from git manually at some point,
when rebasing changes (i think it was the ec ones)
the logic in the file is correct but i forgot to mark
it executable
without this commit, lbmk fails utterly, on all the newer
intel boards
This reverts commit fe2b72035f.
The GRUB patch to fix the E6400 broke other systems and has been
reverted. As a result, GRUB needs to be disabled again on the E6400
until a better fix has been created.
This introduces a patch to grub which disables the coreboot
specific handling, allowing PS/2 keyboards to be handled the
same as i386-pc. However this alone breaks the keyboard in
Linux, requiring coreboot to perform PS/2 initialization.
I think GRUB may be restoring the original configuration of
the PS/2 controller once it exits, and if coreboot doesn't
initialize the controller then it's restored to the default
state which Linux doesn't seem to like. I think the emulated
keyboard interface provided by the EC on the E6400 behaves
in a non-standard way that is incompatible with the old
coreboot specific handling.
ps/2 internal keyboard faulty in grub target
i386-coreboot, according to nic3-14159
normal i386-pc grub (bios grub) is fine,
booted from seabios
it is being investigated
Tested the 4MiB ROMs but not the 8 or 16 MiB ones. This uses the same
board.cfg as the GM45 ThinkPads with an IFD+GBE from ich9gen.
Known issues:
- The internal keyboard does not work properly in GRUB. It seems like
the keyboard controller is outputing set 1 (XT) scancodes, but GRUB
is interpreting them as set 2 (AT) scancodes. This may also have
something to do with scancode translation. However, the keyboard works
fine in SeaBIOS and Linux. USB keyboards also work properly.
- The subsystem IDs in the GBE region are hardcoded for a Thinkpad in
ich9gen, though this doesn't seem to cause issues in Linux. The vendor
IFD and GBE region do have some differences from the generated
binaries, though they do not appear to be critical.
libreboot will still include microcode updates
by default, but mitigations against broken speedstep
and reboot (when microcode updates are excluded) were
removed following the merge with osboot
this patch restores those mitigations; the patch
reverts coreboot to older smrr code (which works fine, it
isn't critical to use the new behaviour) and disables peci
(pointless feature)
i'll probably re-tool this later to apply the changes
conditionally to whether ucode is present
this is not a change in policy. policy says:
include cpu microcode updates by default
policy also says:
libreboot must be configurable
microcode removal via cbfstool remove -n, counts as
configuration, and in practise is not possible on
gm45 patches in current libreboot; this patch corrects
that problem, allowing the machines to work somewhat
well (same stability issues as before, like MCE errors
resulting in kernel panic on high CPU/memory usage,
but i digress)
happy... hacking
This is useful for e.g. HP EliteBook 2560p.
In coreboot config, enable e.g. (for lbmk blobutil):
CONFIG_KBC1126_FW1="../../ec/hp2560p/ec.bin.fw1"
CONFIG_KBC1126_FW2="../../ec/hp2560p/ec.bin.fw2"
In resources/blobs/sources you would have these entries:
EC_url
EC_url_bkup
EC_hash
In cases where the vendor update file contains a full
ROM image encompassing IFD+GbE+ME+BIOS, blobutil was
saving the *entire* ROM containing those, as me.bin.
For example, if it's an 8MB ROM, blobutil would create
a me.bin file that is actually the whole ROM containing:
* Vendor IFD region
* Vendor GbE(if it has one)
* Vendor ME region
* Vendor BIOS region
This fix tries with -M and -O first. In this combination,
me_cleaner shall extract me.bin (neutered) and save it.
If that fails, then the normal method with just -O is
tried, which by this logic would always be a lone ME
image if it succeeds.
I tested downloading ME images on existing boards with
this, and it didn't break them, and this fixes the bug.
This is done for HP 8200 SFF which Riku_V is adding to
lbmk. I'm on IRC with Riku_V as I write this commit
message! Super hot hotfix patch.
bl1 bootloader blobs needed, and lbmk doesn't currently
auto-download these for insertion, so their presence in
the build system is problematic because people might build
these and think they work - they don't, due to the lack of
those bl1 blobs
notes about this are included in lbwww, on the compatibility
list. these can be re-added and tested later, when lbmk handles
those bl1 bootloader blobs
u-boot is known broken on these, last revision
known working is 2021.01
can bisect and find the fix. i'm putting this on
the issue tracker (new one on codeberg)
don't download it. keep it in lbmk.
libreboot moved to codeberg for git hosting,
and i didn't want to keep lugging around an
extra git repo just for one tiny project.
Bruteforce it. Some executables are just using inno
archival but some are simple LZMA. This patch handles
both of them, and also the event where you have LZMA
compressed files (even LZMA compressed files within
LZMA compressed archives) within any inno/lzma compressed
executable.
It recursively scans inside a vendor update, to find
a me.bin files for neutering with me_cleaner.
This is in preparation for two new ports in Libreboot:
* HP EliteBook 8560w
* Apple MacBook Air 4,2 (2011)
This script can literally be used with multiple vendors now.
It is no longer specific just to Lenovo. I originally did
this and other recent commits to the file, as one big
commit, but I decided to split it all up into small commits.
Top-down order is easier to read, for greater understanding.
What's moved is initialisation. The glue that calls Build_deps
and Download_needed still need to be at the bottom.
When using e.g. -p grub in build/boot/roms, it will
error out. This patch fixes that.
E.g.
./build boot roms t440pmrc_12mb -p grub
Seldom used feature and it was overlooked. Most people
won't use the option that triggered the error.
Leah Rowe