lbmk/script/roms

201 lines
6.5 KiB
Bash
Executable File

#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
set -u -e
. "include/lib.sh"
tmprom="$tmpdir/rom"
seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
cfgsdir="config/coreboot"
rp2040src="src/pico-serprog"
rp2040x="$rp2040src/build/pico_serprog.uf2"
picosdk="src/pico-sdk"
rp2040dir="$picosdk/src/boards/include/boards"
stm32src="src/stm32-vserprog"
stm32x="$stm32src/stm32-vserprog.hex"
stm32dir="$stm32src/boards"
# Disable all payloads by default.
# target.cfg files have to specifically enable [a] payload(s)
pv="payload_uboot payload_seabios payload_memtest t payload_grub"
v="romdir initmode displaymode cbcfg targetdir tree release ubootelf"
v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv"
eval `setvars "n" $pv`
eval `setvars "" $v boards targets serdir ser`
main()
{
while [ $# -gt 0 ]; do
if [ "$1" = "serprog" ]; then
[ $# -lt 2 ] && $err "serprog type not set"
[ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \
$err "invalid serprog type"
eval "x_ ./update trees -f \"\${${2}src##*/}\""
ser="$2" && shift 2 && continue
fi
[ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return
[ "$1" = "all" ] && shift && continue
boards="$1 $boards"; shift 1
done
[ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \
config/coreboot)" || $err "can't list coreboot boards"
[ -n "$ser" ] && \
eval "serlist \"\$${ser}dir\" > \"\$tmpdir/ser\" || $err \"!ser\""
[ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$tmpdir/ser")"
for x in $boards; do
[ -n "$ser" ] && mkserprogfw "$ser" "$x"
[ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \
configure_target "$x" && build_roms && \
[ -d "bin/$board" ] && targets="$targets, $x"; continue
done
[ -n "$ser" ] && [ "$xbmk_release" = "y" ] && \
mkrom_tarball "bin/serprog_$ser" && return 0
[ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled"
[ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }"
printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice"
}
mkserprogfw()
{
x_ mkdir -p "bin/serprog_$1"
[ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \
-DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \
x_ cmake --build "$rp2040src/build"
[ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \
BOARD=$2 && x_ make -C "$stm32src" BOARD=$2
eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\""
}
serlist()
{
basename -a -s .h "$1/"*.h || $err "$1: can't list boards"
}
configure_target()
{
eval `setvars "n" $pv`
eval `setvars "" $v`
board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board"
# Override the above defaults using target.cfg
eval `setcfg "$targetdir/target.cfg"`
x_ ./update trees -b coreboot $board
[ -z "$tree" ] && $err "$board: tree not defined"
[ "$xbmk_release" = "y" ] && [ "$release" = "n" ] && return 1
[ "$board" = "$tree" ] && return 1
cbdir="src/coreboot/$tree"
cbfstool="elf/cbfstool/$tree/cbfstool"
[ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree
[ -n "$uboot_config" ] || uboot_config="default"
[ "$payload_uboot" = "y" ] || payload_seabios="y"
[ "$payload_grub" = "y" ] && payload_seabios="y"
[ "$payload_seabios" = "y" ] && [ -n "$payload_uboot" = "y" ] && \
$err "$board: U-Boot and SeaBIOS/GRUB are both enabled."
[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
[ -n "$grubtree" ] || grubtree="default"
grubelf="elf/grub/$grubtree/payload/grub.elf"
[ "$payload_memtest" = "y" ] || payload_memtest="n"
[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0
}
build_roms()
{
x_ rm -Rf "$romdir"
for it in "normal" "vgarom" "libgfxinit"; do
initmode="$it"; hmode="vesafb"
[ "$initmode" = "vgarom" ] || hmode="corebootfb"
modes="$hmode txtmode"
for dt in $modes; do
displaymode="$dt"; [ "$initmode" = "normal" ] && \
[ "$displaymode" != "txtmode" ] && continue
cbcfg="$targetdir/config/${initmode}_$displaymode"
[ "$initmode" = "normal" ] && cbcfg="${cbcfg%_*}"
e "$cbcfg" f not || add_payloads; x_ rm -f "$tmprom"
done
done
}
add_payloads()
{
cbuild="$cbelfdir/$board/${initmode}_$displaymode"
[ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}"
x_ cp "$cbuild/coreboot.rom" "$tmprom"
[ "$payload_seabios" = "y" ] && add_seabios_payload
[ "$payload_uboot" = "y" ] || return 0
# add u-boot payload
x_ ./update trees -b u-boot $board
ubdir="elf/u-boot/$board/$uboot_config"
ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
ubootelf="$ubdir/u-boot"
[ -f "$ubootelf" ] || $err "$board: Can't find u-boot"
cbfs "$tmprom" "$ubootelf" "fallback/payload"
cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
}
add_seabios_payload()
{
_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
x_ ./update trees -b seabios
pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub"
newrom="$romdir/${pstr}_${board}_$initmode.rom"
[ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom"
cbfs "$tmprom" "$_seabioself" "fallback/payload"
x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
z="2"; [ "$initmode" = "vgarom" ] && z="0"
x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
[ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \
vgaroms/seavgabios.bin raw
if [ "$payload_grub" = "y" ]; then
x_ ./update trees -b grub $grubtree
cbfs "$tmprom" "$grubelf" "img/grub2"
printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
> "$tmpdir/tmpcfg" || $err "$board: !insert scandisk"
cbfs "$tmprom" "$tmpdir/tmpcfg" scan.cfg raw
fi
[ "$payload_memtest" = "y" ] && x_ ./update trees -b memtest86plus && \
cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest
cprom "$newrom" && [ "$payload_grub" = "y" ] && \
cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \
cprom "${newrom%.rom}_grubfirst.rom"; return 0
}
cprom()
{
printf "Creating target image: %s\n" "$1"
x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1"
[ "$xbmk_release" = "y" ] && mksha512sum "$1" "vendorhashes" && \
x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0
}
main $@