lbmk/config/coreboot/haswell/patches/0023-haswell-NRI-Add-read-M...

332 lines
12 KiB
Diff

From 6781cec818501f7afd6ee26464fd4556ac3068cb Mon Sep 17 00:00:00 2001
From: Angel Pons <th3fanbus@gmail.com>
Date: Sun, 8 May 2022 11:35:49 +0200
Subject: [PATCH 23/26] haswell NRI: Add read MPR training
Implement read training using DDR3 MPR (Multi-Purpose Register).
Change-Id: Id17cb2c4c399ac9bcc937b595b58f863c152461b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
.../intel/haswell/native_raminit/Makefile.inc | 1 +
.../haswell/native_raminit/raminit_main.c | 1 +
.../haswell/native_raminit/raminit_native.h | 4 +
.../haswell/native_raminit/train_read_mpr.c | 240 ++++++++++++++++++
.../intel/haswell/registers/mchbar.h | 2 +-
5 files changed, 247 insertions(+), 1 deletion(-)
create mode 100644 src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.inc b/src/northbridge/intel/haswell/native_raminit/Makefile.inc
index e2fbfb4211..c442be0728 100644
--- a/src/northbridge/intel/haswell/native_raminit/Makefile.inc
+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.inc
@@ -16,4 +16,5 @@ romstage-y += setup_wdb.c
romstage-y += spd_bitmunching.c
romstage-y += testing_io.c
romstage-y += timings_refresh.c
+romstage-y += train_read_mpr.c
romstage-y += train_receive_enable.c
diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
index 7d444659c3..264d1468f5 100644
--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
@@ -61,6 +61,7 @@ static const struct task_entry cold_boot[] = {
{ do_jedec_init, true, "JEDECINIT", },
{ pre_training, true, "PRETRAIN", },
{ train_receive_enable, true, "RCVET", },
+ { train_read_mpr, true, "RDMPRT", },
};
/* Return a generic stepping value to make stepping checks simpler */
diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
index 500fc28909..a7551ad63c 100644
--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
@@ -27,6 +27,8 @@
/* Always use 12 legs for emphasis (not trained) */
#define TXEQFULLDRV (3 << 4)
+#define LOOPCOUNT_INFINITE 0xff
+
/* DDR3 mode register bits */
#define MR0_DLL_RESET BIT(8)
@@ -212,6 +214,7 @@ enum raminit_status {
RAMINIT_STATUS_POLL_TIMEOUT,
RAMINIT_STATUS_REUT_ERROR,
RAMINIT_STATUS_RCVEN_FAILURE,
+ RAMINIT_STATUS_RMPR_FAILURE,
RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
};
@@ -435,6 +438,7 @@ enum raminit_status configure_mc(struct sysinfo *ctrl);
enum raminit_status configure_memory_map(struct sysinfo *ctrl);
enum raminit_status do_jedec_init(struct sysinfo *ctrl);
enum raminit_status train_receive_enable(struct sysinfo *ctrl);
+enum raminit_status train_read_mpr(struct sysinfo *ctrl);
void configure_timings(struct sysinfo *ctrl);
void configure_refresh(struct sysinfo *ctrl);
diff --git a/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
new file mode 100644
index 0000000000..0225e1a384
--- /dev/null
+++ b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <commonlib/clamp.h>
+#include <console/console.h>
+#include <delay.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <types.h>
+
+#include "raminit_native.h"
+#include "ranges.h"
+
+#define RMPR_START (-32)
+#define RMPR_STOP (32)
+#define RMPR_STEP 1
+
+#define RMPR_MIN_WIDTH 12
+
+#define RMPR_PLOT RAM_DEBUG
+
+/*
+ * Clear rx_training_mode. For LPDDR, we first need to disable odt_samp_extend_en,
+ * then disable rx_training_mode, and finally re-enable odt_samp_extend_en.
+ */
+static void clear_rx_training_mode(struct sysinfo *ctrl, const uint8_t channel)
+{
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+ mchbar_write32(DQ_CONTROL_2(channel, byte), ctrl->dq_control_2[channel][byte]);
+
+ if (ctrl->lpddr) {
+ union ddr_data_control_0_reg data_control_0 = {
+ .raw = mchbar_read32(DDR_DATA_ch_CONTROL_0(channel)),
+ };
+ data_control_0.odt_samp_extend_en = 0;
+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
+ tick_delay(1);
+ data_control_0.rx_training_mode = 0;
+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
+ tick_delay(1);
+ }
+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
+}
+
+static void set_rxdqs_edges_to_midpoint(struct sysinfo *ctrl)
+{
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!does_ch_exist(ctrl, channel))
+ continue;
+
+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+ update_rxt(ctrl, channel, rank, byte, RXT_RXDQS_BOTH, 32);
+ }
+ }
+}
+
+static void enter_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank)
+{
+ /* Program MR3 and mask RAS/WE to prevent scheduler from issuing non-read commands */
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ if (!ctrl->lpddr)
+ reut_issue_mrs(ctrl, channel, BIT(rank), 3, 1 << 2);
+
+ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
+ .raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)),
+ };
+ reut_misc_odt_ctrl.mpr_train_ddr_on = 1;
+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
+ }
+}
+
+static void leave_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank)
+{
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ /*
+ * The mpr_train_ddr_on bit will force a special command.
+ * Therefore, clear it before issuing the MRS command.
+ */
+ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
+ .raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)),
+ };
+ reut_misc_odt_ctrl.mpr_train_ddr_on = 0;
+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
+ if (!ctrl->lpddr)
+ reut_issue_mrs(ctrl, channel, BIT(rank), 3, 0 << 2);
+ }
+}
+
+enum raminit_status train_read_mpr(struct sysinfo *ctrl)
+{
+ set_rxdqs_edges_to_midpoint(ctrl);
+ clear_data_offset_train_all(ctrl);
+ setup_io_test_mpr(ctrl, ctrl->chanmap, LOOPCOUNT_INFINITE, NSOE);
+ enum raminit_status status = RAMINIT_STATUS_SUCCESS;
+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
+ if (!does_rank_exist(ctrl, rank))
+ continue;
+
+ printk(BIOS_DEBUG, "Rank %u\n", rank);
+ printk(RMPR_PLOT, "Channel");
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ printk(RMPR_PLOT, "\t%u\t\t", channel);
+ }
+ printk(RMPR_PLOT, "\nByte");
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ printk(RMPR_PLOT, "\t");
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+ printk(RMPR_PLOT, "%u ", byte);
+ }
+ enter_mpr_train_ddr_mode(ctrl, rank);
+ struct linear_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 };
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++)
+ select_reut_ranks(ctrl, channel, BIT(rank));
+
+ printk(RMPR_PLOT, "\nDqsDelay\n");
+ int8_t dqs_delay;
+ for (dqs_delay = RMPR_START; dqs_delay < RMPR_STOP; dqs_delay += RMPR_STEP) {
+ printk(RMPR_PLOT, "% 5d", dqs_delay);
+ const enum regfile_mode regfile = REG_FILE_USE_START;
+ change_1d_margin_multicast(ctrl, RdT, dqs_delay, 0, false, regfile);
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
+ union ddr_data_control_2_reg data_control_2 = {
+ .raw = ctrl->dq_control_2[channel][byte],
+ };
+ data_control_2.force_bias_on = 1;
+ data_control_2.force_rx_on = 1;
+ data_control_2.leaker_comp = 0;
+ mchbar_write32(DQ_CONTROL_2(channel, byte),
+ data_control_2.raw);
+ }
+ union ddr_data_control_0_reg data_control_0 = {
+ .raw = ctrl->dq_control_0[channel],
+ };
+ data_control_0.rx_training_mode = 1;
+ data_control_0.force_odt_on = !ctrl->lpddr;
+ data_control_0.en_read_preamble = 0;
+ data_control_0.odt_samp_extend_en = ctrl->lpddr;
+ const uint32_t reg_offset = DDR_DATA_ch_CONTROL_0(channel);
+ mchbar_write32(reg_offset, data_control_0.raw);
+ }
+ run_mpr_io_test(false);
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ printk(RMPR_PLOT, "\t");
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
+ uint32_t fb = get_data_train_feedback(channel, byte);
+ const bool pass = fb == 1;
+ printk(RMPR_PLOT, pass ? ". " : "# ");
+ linear_record_pass(
+ &region_data[channel][byte],
+ pass,
+ dqs_delay,
+ RMPR_START,
+ RMPR_STEP);
+ }
+ }
+ printk(RMPR_PLOT, "\n");
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ clear_rx_training_mode(ctrl, channel);
+ }
+ io_reset();
+ }
+ printk(RMPR_PLOT, "\n");
+ leave_mpr_train_ddr_mode(ctrl, rank);
+ clear_data_offset_train_all(ctrl);
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\tRxDqsPN\n",
+ channel, rank);
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
+ struct linear_train_data *data = &region_data[channel][byte];
+ const int32_t lwidth = range_width(data->largest);
+ if (lwidth <= RMPR_MIN_WIDTH) {
+ printk(BIOS_ERR,
+ "Bad eye (lwidth %d <= min %d) for byte %u\n",
+ lwidth, RMPR_MIN_WIDTH, byte);
+ status = RAMINIT_STATUS_RMPR_FAILURE;
+ }
+ /*
+ * The MPR center may not be ideal on certain platforms for
+ * unknown reasons. If so, adjust it with a magical number.
+ * For Haswell, the magical number is zero. Hell knows why.
+ */
+ const int32_t center = range_center(data->largest);
+ ctrl->rxdqsp[channel][rank][byte] = center - RMPR_START;
+ ctrl->rxdqsn[channel][rank][byte] = center - RMPR_START;
+ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\t%u\n", byte,
+ data->largest.start, data->largest.end, lwidth,
+ center, ctrl->rxdqsp[channel][rank][byte]);
+ }
+ printk(BIOS_DEBUG, "\n");
+ }
+ }
+
+ /*
+ * Now program the DQS center values on populated ranks. data is taken from
+ * the host struct. We need to do it after all ranks are trained, because we
+ * need to keep the same DQS value on all ranks during the training procedure.
+ */
+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+ if (!does_ch_exist(ctrl, channel))
+ continue;
+
+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
+ if (!rank_in_ch(ctrl, rank, channel))
+ continue;
+
+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
+ }
+ }
+ change_1d_margin_multicast(ctrl, RdT, 0, 0, false, REG_FILE_USE_CURRENT);
+ io_reset();
+ return status;
+}
diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
index 0acafbc826..6a31d3a32c 100644
--- a/src/northbridge/intel/haswell/registers/mchbar.h
+++ b/src/northbridge/intel/haswell/registers/mchbar.h
@@ -122,7 +122,7 @@
#define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch)
#define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch)
-
+#define REUT_ch_MISC_ODT_CTRL(ch) _MCMAIN_C(0x4194, ch)
#define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch)
#define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch)
#define REUT_ch_PAT_CADB_MUX_CTRL(ch) _MCMAIN_C(0x41a0, ch)
--
2.39.2