176 lines
7.5 KiB
Markdown
176 lines
7.5 KiB
Markdown
---
|
|
title: BSD operating systems
|
|
x-toc-enable: true
|
|
...
|
|
|
|
Guide last updated on 16 November 2022.
|
|
|
|
NOTE: This guide pertains to x86 hosts, and does not cover supported CrOS/ARM
|
|
chromebooks. For ARM targets, you should refer to u-boot documentation.
|
|
|
|
libreboot is capable of booting many BSD systems. This section mostly documents
|
|
the peculiarities of libreboot as it pertains to BSD; you can otherwise refer to
|
|
the official documentation for whatever BSD system you would like to use.
|
|
|
|
Kernel Mode Setting
|
|
===================
|
|
|
|
Your BSD system *must* support Kernel Mode Setting for your graphics
|
|
device (most of them do nowadays). The reasons will become apparent, as
|
|
you read this article.
|
|
|
|
Boot BSD, using SeaBIOS
|
|
=======================
|
|
|
|
On x86 platforms, Libreboot provides the choice of GRUB and/or
|
|
SeaBIOS payload. GRUB can technically boot BSD kernels, but the code is
|
|
poorly maintained and unreliable for this use-case scenario; on BIOS systems,
|
|
GRUB can chainload BSD bootloaders, but on bare metal (as coreboot payload),
|
|
GRUB can only chainload other coreboot payloads or boot Linux/BSD kernels
|
|
directly (but direct booting is only really reliable for Linux, in GRUB).
|
|
|
|
It is recommended that you boot in text mode, with SeaBIOS. You can literally
|
|
just follow the official installation guides for your BSD system, whether it
|
|
be FreeBSD, OpenBSD or others.
|
|
|
|
If you don't plan to set up Xorg/Wayland, then that's all you really need to
|
|
do. For example, you might want to run a headless server, in which case you
|
|
probably don't mind running in text mode all the time.
|
|
|
|
OpenBSD and corebootfb
|
|
----------------------
|
|
|
|
It's still recommended to use SeaBIOS in text mode, but OpenBSD specifically
|
|
can work with SeaBIOS booting in a coreboot framebuffer, with SeaVGABIOS. In
|
|
Libreboot ROM images, this would be SeaBIOS images with `corebootfb` in the
|
|
file name.
|
|
|
|
Make sure to select MBR-style partitioning on the installer, and it will
|
|
Just Work.
|
|
|
|
If you're using the GRUB payload but SeaBIOS is available in the boot menu,
|
|
you can just select SeaBIOS at said menu, and OpenBSD will work fine.
|
|
|
|
FreeBSD and corebootfb
|
|
----------------------
|
|
|
|
Assumed broken, so please ensure that you boot with SeaBIOS payload in text
|
|
mode (lbmk ROM images with `txtmode` in the file name, not `corebootfb`).
|
|
|
|
Warnings for X11 users
|
|
----------------------
|
|
|
|
One important peculiarity of most libreboot systems is: VGA mode
|
|
support exists, if booting with corebootfb (coreboot's own framebuffer) and
|
|
the SeaVGABIOS option ROM used in the SeaBIOS payload; however, the ability
|
|
to switch modes is not present, which means you can't switch to text mode
|
|
either.
|
|
|
|
Coreboot can start in framebuffer (corebootfb) or INT10H text mode, and it
|
|
stays in whatever mode was set, unless KMS is used to change the mode. It
|
|
should be noted that the coreboot framebuffer is not a VGA mode, but instead
|
|
coreboot implements minimal drivers for hardware that it supports, providing
|
|
a framebuffer directly in memory, which software (such as GRUB) can simply
|
|
use.
|
|
|
|
The BSD bootloaders on x86, in BIOS systems, typically expect text mode
|
|
startup. It is usually possible to set the console to higher VGA modes,
|
|
on most systems, but not on most coreboot systems with native video
|
|
initialisation used, due to the quirks already described. If you see any
|
|
documentation (in BSD land) pertaining to VESA modes, ignore it entirely;
|
|
unless you're using the proprietary VGA ROM for your device, it won't work,
|
|
and Libreboot doesn't distribute these (instead, coreboot's own video
|
|
initialisation is used where possible, or a headless SeaBIOS payload setup
|
|
is provided, where you would either run it headless or install a graphics
|
|
card).
|
|
|
|
Now, this would otherwise mean: no X11/Wayland. If you start in corebootfb
|
|
mode with SeaVGABIOS, you won't get a display in BSD bootloaders, and if you
|
|
boot in text mode, you can't set VESA modes from BSD. However, you're in luck:
|
|
|
|
At least OpenBSD and FreeBSD (possibly others) all have excellent KMS
|
|
support nowadays; short for `Kernel Mode Setting`. This avoids the inefficiency
|
|
of BIOS/UEFI methods, by having the kernel set modes directly. It is based on
|
|
KMS drivers that the BSD projects ported over from the Linux kernel. With this,
|
|
you can use X11/Wayland in FreeBSD (and just X11 in OpenBSD, for now).
|
|
|
|
For example: on FreeBSD, you can install `graphics/drm-kmod` as a package
|
|
or from ports, and (for Intel GPUs) do this:
|
|
|
|
sysrc kld_list+="i915kms"
|
|
|
|
This creates the following entry in `/etc/rc.conf`:
|
|
|
|
kld_list="i915kms"
|
|
|
|
On FreeBSD it is also recommended that you switch to KMS on the console/TTY;
|
|
add this to `/boot/loader.conf` so that you can still use the console after
|
|
terminating Xorg:
|
|
|
|
kern.vty=vt
|
|
|
|
You should not rely on the above instruction (for FreeBSD), because the exact
|
|
step might change, and it does not go into full detail either. Refer to the
|
|
documentation provided by your system, to know how KMS is configured.
|
|
|
|
ALWAYS READ THE MANUAL
|
|
----------------------
|
|
|
|
All of the BSDs have *excellent* documentation; it's one of the defining
|
|
characteristics, versus typical Linux distros.
|
|
|
|
Aside from this quirk in coreboot, regarding *BIOS* video modes, the BSDs
|
|
otherwise work in exactly the same way as you would expect, and you can
|
|
follow along to their official documentation without much fuss.
|
|
|
|
No specific or detailed guides will be provided here, because SeaBIOS is
|
|
fairly self-explanatory; you can otherwise refer to the SeaBIOS
|
|
documentation.
|
|
|
|
If you're flashing a ROM for a machine where `seabios_withgrub`
|
|
and `seabios_grubfirst` ROMs are available, choose `seabios_withgrub`.
|
|
|
|
DO NOT USE ROM IMAGES WITH `seabios_grubfirst` IN THE FILE NAME! These were
|
|
present in older Libreboot releases, and supported in previous revisions
|
|
of the build system, but they did not work for the intended purpose. More
|
|
info is written on the [Libreboot installation guide](../install/). ROM
|
|
images with `seabios_grubfirst` in the filename will NOT be included in
|
|
future Libreboot releases.
|
|
|
|
Dubious mention: Tianocore
|
|
--------------------------
|
|
|
|
Tianocore is extremely bloated, and unauditable, so it is not included
|
|
in Libreboot firmware, but it is the reference UEFI implementation by
|
|
Intel and contributors. It can boot most BSD systems very well.
|
|
|
|
More robust ways to provide UEFI services in Libreboot are to be investigated.
|
|
Tianocore integration will not be provided officially, in any current or future
|
|
releases of Libreboot.
|
|
|
|
Desktop users
|
|
-------------
|
|
|
|
NOTE: This section may not be full accurate; for example, the hardware page
|
|
about HP Elite 8200 SFF talks about use of graphics cards on both corebootfb
|
|
and txtmode setups, and seems to work fine with SeaBIOS in both cases.
|
|
|
|
Desktop users on Libreboot should just install a graphics card,
|
|
and again boot with SeaBIOS in text mode; however, when you do this,
|
|
SeaBIOS will execute the VGA option ROM on the card which will provide
|
|
early video initialisation instead of coreboot's initialisation, and that
|
|
VGA ROM will usually implement full INT10H modes, including the ability
|
|
to set modes in the BIOS (using interrupts), in which case you don't
|
|
need to worry about Kernel Mode Setting, but you should still use KMS
|
|
anyway.
|
|
|
|
The reason to use KMS is because it's more efficient. The INT10H service can
|
|
only be called in Real Mode or Virtual 8086 mode; v8086 is unavailable in
|
|
long mode (x86\_64) and switching into Real Mode just to set VGA modes is
|
|
extremely expensive computationally speaking. This is why modern kernels
|
|
(Linux and BSD one) do mode setting themselves.
|
|
|
|
You can learn more about INT10H text/VGA modes here:
|
|
|
|
<https://en.wikipedia.org/wiki/INT_10H>
|