libreboot
/
lbwww
1
0
Fork 0
Code Packages Projects Releases Activity
lbwww/site/docs/install/t440p_external.md

4.7 KiB
Raw Blame History

Please follow this prior to flashing, or you may brick your machine.

Please inject vendor files prior to flashing. You can also use this guide to change the built-in MAC address for your Intel Gigabit Ethernet device; doing so is advisable, because otherwise you will have a default, generic MAC address.

Splitting The Rom

You can use dd to easily split your rom into the two separate portions for external flashing.

dd if=libreboot.rom of=top.rom bs=1M skip=8
dd if=libreboot.rom of=bottom.rom bs=1M count=8

Flash the top chip with top.rom, and tho bottom chip with bottom.rom. Don't worry about knowing which chip is which on a standard setup; flashprog will let you know if the image size is incorrect for the chip you're flashing.

Disassembly

Start by removing the back cover screws and the main battery.

You can then remove the back cover by sliding it off. Next you need to:

  • Unplug the cmos battery
  • Unplug and unroute the fan cable
  • Unplug and unroute the black LED cable
  • Remove all visible screws

Note: the ultrabay screw will loosen, but not come out of the assembly

Now you can pull up around the sides of the bottom assembly to release it. Pull it upwards and lift it open to the front of the machine like a clamshell. Make sure not to break the wires connecting the assembly to the rest of the machine.

You should now be able to see the two flash chips near the RAM.

You can now proceed to flashing this machine.

thinkpad_acpi issues

It has been reported by that thinkpad_acpi does not load correctly on the T440p.

If you encounter this, check this page for details as to how to fix this.

Errata

NOTE: As of Libreboot releases from May 2024 onward, the Intel MRC is no longer included for Haswell; MRC is a blob for raminit, but we now provide libre raminit. The following targets no longer exist in the build system:

  • t440pmrc_12mb (use t440plibremrc_12mb instead)
  • t440pbmrc_12mb (use t440plibremrc_12mb instead)
  • w541mrc_12mb (use w541_12mb instead)
  • w541bmrc_12mb (use w541_12mb instead)
  • dell9020sff_12mb (use dell9020sff_nri_12mb instead)
  • dell9020sffbmrc (use dell9020sff_nri_12mb instead)
  • dell9020mt_12mb (use dell9020mt_nri_12mb instead)
  • dell9020mtbmrc (use dell9020mt_nri_12mb instead)

This is written as errata because some users may still be using older release images but on the newer build system from May 2024 onward; you must use the Libreboot 20240225 release if you want to inject MRC and so on, for these older targets.

Libreboot's binary blob reduction policy is very strict, and states: if a blob can be avoided, it must be avoided. Therefore, the MRC is removed on Haswell and Libreboot will only use the libre raminit (called NRI, short for Native Ram Initialisation).