950 lines
56 KiB
Markdown
950 lines
56 KiB
Markdown
% Libreboot 20240612 released!
|
|
% Leah Rowe
|
|
% 12 June 2024
|
|
|
|
Introduction
|
|
============
|
|
|
|
Libreboot is a free/open source BIOS/UEFI replacement on x86 and ARM, providing
|
|
boot firmware that initialises the hardware in your computer, to then load an
|
|
operating system (e.g. Linux/BSD). It is specifically a *coreboot distribution*,
|
|
in the same way that Debian is a Linux distribution. It provides an automated
|
|
build system to produce coreboot ROM images with a variety of payloads such as
|
|
GNU GRUB or SeaBIOS, with regular well-tested releases to make coreboot as easy
|
|
to use as possible for non-technical users. From a project management perspective,
|
|
this works in *exactly* the same way as a Linux distro, providing the same type
|
|
of infrastructure, but for your boot firmware instead of your operating system.
|
|
It makes use of [coreboot](https://www.coreboot.org/) for hardware initialisation,
|
|
and then a payload such as [SeaBIOS](https://www.seabios.org/SeaBIOS)
|
|
or [GNU GRUB](https://www.gnu.org/software/grub/) to boot your operating
|
|
system; on ARM(chromebooks), we provide *U-Boot* (as a coreboot payload).
|
|
|
|
This is a *bugfix* release, and is considered stable. It fixes a series of bugs
|
|
that were discovered in the previous Libreboot 20240504 release from 4 May 2024.
|
|
The [errata](libreboot20240504.md#errata) on Libreboot 20240504 meant that all
|
|
ROM images had to be removed, so a new stable release had to be made ASAP to
|
|
compensate.
|
|
|
|
A new *testing* release is planned for July, adding many more new mainboards;
|
|
today's stable release only fixes bugs and adds some new features to the build
|
|
system, which have been rigorously tested during the course of the recent audit.
|
|
|
|
The changes of the recent [5th build system audit](audit5.md) are included, in
|
|
this release, in addition to a few minor fixes made since that date. The audit
|
|
was completed on 9 June 2024 and today is 12 June 2024. The release came unstuck.
|
|
|
|
Changes since Audit 5
|
|
=====================
|
|
|
|
Audit 5 was only recent, and forms most of the changes in this release, so look
|
|
further down for a list of those changes or read [the audit 5 page](audit5.md).
|
|
|
|
Some minor changes have been made in the few days since completion of that
|
|
audit, namely:
|
|
|
|
* Add a patch from Nico Huber fixing the Intel graphics device on certain
|
|
Xeon processors that can be used on Haswell macchines. Unlikely to be used
|
|
by Libreboot users, but for example it has been discovered that the Dell
|
|
Precision T1700 is mostly compatible with the 9020 MT images; some GPIOs and
|
|
such may not be configured correctly yet, and a proper T1700 port is not yet
|
|
available.
|
|
* Add a patch from Mate Kukri fixing DP++ on Dell OptiPlex 9020 ports; enables
|
|
use of a passive adapter for HDMI/DVI on the displayport.
|
|
* Coreboot trees: use coreboot's own nasm mirror as backup, instead of the
|
|
macports mirror that was used in audit5. In audit5, a feature was added where
|
|
crossgcc tarballs are downloaded by lbmk, with redundant links, rather than
|
|
relying on the coreboot build system to do this. (and this means that cross
|
|
gcc tarballs are now included in the release tarballs, enabling fully offline
|
|
builds on boards that don't need to download vendor files at build time)
|
|
* NVMe patch for GRUB payload: it is still present, but it is now *only* enabled
|
|
on boards that can physically *have* NVMe SSDs; on boards that don't need the
|
|
patch, it is not present. This means there are three GRUB trees: `default`
|
|
which most boards use and lacks nvme/xhci support, `nvme` which contains the
|
|
NVMe support and `xhci` which contains both xHCI and NVMe support. Each board
|
|
is configured to use the appropriate GRUB tree, as required.
|
|
|
|
The reason for separating the NVMe patch to only those boards that need it, is
|
|
precisely to avoid any potential issues if a board doesn't need it. The NVMe
|
|
patch has been extensively tested, on all of the boards that actually have it.
|
|
|
|
Audit 5 changes
|
|
===============
|
|
|
|
Since the recent audit 5 changes are included in this release, the changelog
|
|
of that audit has simply been copied for sake of efficiency. Firstly:
|
|
|
|
Modest code size reduction
|
|
--------------------------
|
|
|
|
There are 1482 lines of shell script in the build system, versus 1680 in the
|
|
Libreboot 20240504 release. Libreboot's build system is written purely in
|
|
POSIX sh; not BASH, not KSH, not ZSH, jush sh!
|
|
|
|
This is a difference of 198 lines, or a 12% reduction. Despite the reduction,
|
|
numerous features have been added and a large number of bugs were fixed.
|
|
|
|
Summarised list of changes
|
|
==========================
|
|
|
|
Changes are in order per category, from newest to oldest:
|
|
|
|
Feature changes
|
|
---------------
|
|
|
|
* **Download crossgcc tarballs as dependencies, when cloning coreboot.** We
|
|
previously relied on the coreboot build system, which automatically fetches
|
|
these when running `make crossgcc`, which we run automatically. However,
|
|
the coreboot logic has to be patched for reliability because the GNU HTTP 302
|
|
redirect often fails so we use a static mirror, and the logic has no
|
|
redundancy. With this new change, we use the same tarballs but we specify
|
|
two URLs, a main and a backup. This also means that the tarballs will once
|
|
again be included in Libreboot release archives, enabling offline builds.
|
|
* **Support downloading files as submodules, in Git repositories.** This
|
|
complements the pre-existing feature where sub-repositories (Git) can be
|
|
cloned into a subdirectory of a given main repo. We use this for crossgcc,
|
|
as referenced above.
|
|
* New files under `config/dependencies/` for Fedora 40 and Ubuntu 24.04. Now
|
|
you can run `./build dependencies fedora40`
|
|
and `./build dependencies ubuntu2404` on each respective distro, to get
|
|
the right build dependencies for building Libreboot from lbmk.
|
|
* **NEVER** run `git submodule update`, *ever*. Instead, rely *solely* on
|
|
config/submodule/ to define which dependencies should be downloaded, to each
|
|
given subdirectory within a main project. This is using a feature described
|
|
later on (in this audit report), whereby projects can have redundant
|
|
submodule repositories defined; initially, this feature was an *override*
|
|
where otherwise the submodule update command would be executed if
|
|
the `.gitmodules` file existed for a given project; this override is now
|
|
the *only* way to do it, and is thus the default behaviour. This may be
|
|
considered a preventative bug fix, in case certain projects auto-download
|
|
submodules that might cause us trouble in the future. It's better that we
|
|
maintain tight control of submodules.
|
|
* **Summarising the next few changes mentioned below: out-of-source builds
|
|
are now fully supported, for both single- and multi-tree projects.** (it was
|
|
previously only supported on multi-tree projects)
|
|
* Moved builds of coreboot utilities (e.g. cbfstool) to `elf/utilname`,
|
|
e.g. `elf/cbfstool/default/cbfstool` would be the new cbfstool binary location
|
|
for the one build from coreboot in the `default` tree.
|
|
* script/trees: Now single-tree builds are skipped if a build exists
|
|
under `elf/projectname/`, based on the presence of a `build.list` file; this
|
|
is consistent with the same behaviour pre-existing for multi-tree projects.
|
|
* When building memtest86plus, the binary is now placed out-of-source,
|
|
into `elf/memtest86plus`.
|
|
* When building flashprog, the binary is now placed out-of-source,
|
|
into `elf/flashprog/`.
|
|
* Use new function `singletree` to decide whether to use submodules, rather
|
|
than hardcoding a check for *coreboot* - NOTE: use of submodules was later
|
|
disabled during this audit, replaced with custom handling in lbmk.
|
|
* For error exits caused by *improper commands* (as opposed to fault conditions
|
|
while processing valid commands), don't directly call `err`; instead, call a
|
|
newly written function `badcmd` which says that much, and links to the
|
|
website (if `docs/` is present as in releases, it also points there).
|
|
* Added a `projectsite` file pointing to libreboot.org, complementing the
|
|
existing `projectname` file which contains the word `libreboot`. This is
|
|
used in the `version` command.
|
|
* **GRUB is now a multi-tree project.** Each given coreboot target can
|
|
specify which GRUB tree it wants to use, each containing its own revision
|
|
and patches, with its own GRUB configuration file. This can be used later on
|
|
to provide specific optimisations on each given mainboard, but it is used
|
|
at present to exclude xHCI patches on boards that don't need it; please also
|
|
read the bugfix section (of this audit report) pertaining to this same topic,
|
|
for more context. Before this change was implemented, all mainboards used
|
|
the exact same GRUB revision, with the same patches and the same config.
|
|
* grub.cfg: scan `grub2/` last, on each given device/partition; this speeds
|
|
up the boot time in most tests, because most setups use `grub/`,
|
|
but `grub2/` is still used on legacy setups so we have to support it and, for
|
|
reasons mentioned in the bullet point below, GRUB is very inefficient at
|
|
generating the list of devices/partitions when using the `*` wildcard, so
|
|
we can't scan `grub*/`.
|
|
* grub.cfg: it now scans a reduced set of devices/partitions by default, while
|
|
still ensuring (in practise, on real systems) that all such devices and
|
|
partitions will be scanned. We hardcode this, because the `*` wildcard in
|
|
GRUB is *very slow* on some machines, due to the way the GRUB kernel
|
|
constantly re-initialises the list of devices and partitions during operation.
|
|
Scanning an *excessive* number of hardcoded device/partition numbers slows
|
|
down the boot too, so this has been optimised. It has been tested and it
|
|
shouldn't cause any issues on machines/setups that people actually use.
|
|
* **grub.cfg: scan distro-provided grub.cfg from ESP;** we previously only
|
|
scanned the ESP for isolinux/syslinux configurations (which GRUB can parse).
|
|
* grub.cfg: Don't search for `*_grub.cfg` as this slows down the bootup
|
|
sequence, and nobody really uses this anymore; Libreboot's GRUB is much more
|
|
robust these days, pretty much booting anything automatically, but you used
|
|
to have to (regularly) use a `libreboot_grub.cfg` file to override the default
|
|
one provided by your distro. This legacy cruft has been removed, entirely!
|
|
* Import the `nuke()` function from Canoeboot; even though Libreboot does not
|
|
deblob (that's what Canoeboot is for), it still needs to delete certain files
|
|
from time to time, and this function does a very efficient job of that.
|
|
This is used to delete a poorly licensed source file from U-Boot,
|
|
namely `test/lib/strlcat.c` (the license name has a typo in it which makes
|
|
the file technically non-free or otherwise tainted) - that file was already
|
|
deleted before, but the deletion was hardcoded, so now it is deleted
|
|
systematically, and it is now possible to add new deletions without modifying
|
|
more code in lbmk.
|
|
* **T440p/W541 laptops: Enable NVMe SSDs in `grub_scan_disk`**; an e-key adapter
|
|
can be used in the WLAN slot, to add an NVMe SSD. Even though throughput
|
|
is limited by the x1 PCI-E width, it's still a viable upgrade as it offers
|
|
slightly improved read/write performance compared to any SATA SSD.
|
|
* script/roms: Allow to override `grub_scan_disk` via `-s`, for
|
|
example: `./build roms -s nvme t1650_12mb`
|
|
* **grub.cfg: Use `grub_scan_disk` to set boot order (rather, boot order by
|
|
device type).** It is possible now to configure each mainboard with this
|
|
variable, so that certain types of devices are scanned in a precise order;
|
|
for example, scan NVMe SSDs first.
|
|
* **include/git.sh: Allow manual override of `git submodule` handling**, instead
|
|
directly downloading Git repositories using `git clone`, into the subdirectory
|
|
of a given main Git repository (as per `src/projectname` scheme). With this
|
|
feature, it is possible now to specify a *backup* submodule repository, for
|
|
redundancy, all while still allowing to reset the revision (and *patch* the
|
|
given submodule). This has been used to provide greater redundancy when
|
|
downloading coreboot submodules. It also allows to *limit* the number of
|
|
submodules, so now we only download the ones we need, thus saving bandwidth
|
|
especially during very large and long build sessions. - *NOTE: this was
|
|
later changed so as to be the ONLY method for downloading submodules, skipping
|
|
the actual git-submodule-update command entirely, on all projects.*
|
|
* **Native NVMe driver added to the GRUB payload**, allowing users to boot from
|
|
NVMe SSDs where present on a given mainboard. The patch is courtesy of
|
|
Mate Kukri, who ported SeaBIOS's own NVMe driver, converting all of the
|
|
code to run properly within GRUB's own kernel. NVMe SSDs are now fully
|
|
bootable on all machines that can have them, offering vastly superior
|
|
read and write performance when compared to SATA SSDs.
|
|
* include/git.sh: Allow patching git submodules (NOTE: support for submodules
|
|
was removed entirely, later in the audit, in favour of custom logic in lbmk
|
|
for the downloading of such dependencies).
|
|
* Added Portuguese keyboard support in the GRUB payload (patch courtesy of
|
|
the contributor by alias `samuraikid`).
|
|
* Removed all help commands, because it's just a duplication of documentation
|
|
that is already included in releases anyway, and people using the Git
|
|
repository require internet access anyway, so they can just use the website.
|
|
* Main build script: removed the functionality for generating source tarballs
|
|
where the only source code included is U-Boot; we do not need this, because
|
|
the larger source tarball containing all of Libreboot also contains U-Boot.
|
|
* include/option.sh: Don't bother checking for GNU Tar, because we were only
|
|
using it for reproducible tarball generation which didn't work yet anyway;
|
|
there are still ways of doing it with BSD tar and so on.
|
|
* Print a two-line break before confirming the location of the generated
|
|
release archive, when running release builds. This makes it more obvious
|
|
to the operator.
|
|
* **Removed the MRC (raminit blob) on Intel Haswell** (4th generation)
|
|
hardware, namely the ThinkPad T440p, W541, Dell OptiPlex 9020 MT
|
|
and Dell OptiPlex 9020 SFF; the libre raminit now works well, and S3 works.
|
|
* Removed all status checks from script/roms (formerly script/build/roms),
|
|
because it's better to document this instead, and rely on testing regardless.
|
|
|
|
Bug fixes
|
|
---------
|
|
|
|
Some of these changes fix actual issues that were found in testing, while
|
|
others were fixed *before* being triggered/reported and are thus *preventative
|
|
bug fixes*. The logic in lbmk has been very intensively audited as is customary!
|
|
|
|
The changes are, from newest to earliest:
|
|
|
|
* script/trees: Exit with error status if a given project is not defined. It
|
|
was previously decided that this script could be used to directly run Makefiles
|
|
from any given directory, but this is no longer done as it was error-prone;
|
|
this change prevents such usage, thereby preventing unstable conditions within
|
|
the build system.
|
|
* **Create a lock file when running lbmk.** Only do it from the main parent
|
|
instance, but not child instances of it; delete it at the end, after exiting
|
|
from the parent process. If starting a separate parent process, that one
|
|
will now immediately exit (with error status) if the lock file exists. This
|
|
prevents the fault condition where the user accidentally runs the same lbmk
|
|
instance twice, from the same work directory; it is only designed to be
|
|
executed once, per work directory. This is similar to the locking feature
|
|
you find in package managers such as apt-get. Also do this in release/
|
|
directories, while building (but don't include a lock file inside the tarball).
|
|
* include/git.sh: When doing a global check for files in every project all at
|
|
once, as defined by each respective (if existent) `nuke.list` file, hide
|
|
the output. Only show the output when running it on a specific project, not
|
|
the one in the for loop. This prevents user confusion / false bug reports.
|
|
* include/git.sh: Download coreboot as defined by `xtree` *before* downloading
|
|
the main project that defined it, to prevent a situation where the main project
|
|
is downloaded successfully but not the dependency (defined by `xtree`); this
|
|
is to maintain the integrity of the build system under fault conditions.
|
|
* include/lib.sh: When a download fails (running the `download` function),
|
|
don't then say that the file is "missing". Instead, actually say that the
|
|
download failed, so that the operator has a better understanding.
|
|
* include/lib.sh: Hide stderr on the `download` function, for the initial
|
|
check when verifying an existing file; although no problem existed on
|
|
technical terms, the output was confusing because it made the user think
|
|
there was a problem. The logic then downloads and re-verifies, and the
|
|
output indicating *that* verification has not been hidden; if the file
|
|
already exists, this is simply indicated by `e()`. This is considered a bug
|
|
fix, because it fixes the bug where users made erroneous bug reports, by
|
|
re-engineering the situation so that they do not make such erroneous reports.
|
|
TL;DR hide a totally benign (non-)error message.
|
|
* include/git.sh: Provide better user feedback about what is being downloaded
|
|
and where - although nothing was broken before, this lack of feedback was a
|
|
bug because it made debugging harder. Provide more clarity for the user.
|
|
* include/git.sh: Download dependencies *before*, not *after*, downloading the
|
|
project sources that depend on it. For example, pico-serprog depends on
|
|
pico-sdk. If you were to download pico-sdk *after* pico-serprog, the latter
|
|
may be downloaded and placed in src/, but then the former (sdk) could fail
|
|
due to bad internet, and now the overall downloaded code is corrupt, and there
|
|
was nothing checking for this after the fact; checking for it would be bloat.
|
|
By downloading the dependency *before*, then if *that* download fails, so
|
|
does the main one, and integrity is maintained within the build system.
|
|
* Preventative bugfix: don't check empty paths in `copy_elf` (of script/trees),
|
|
even though this potential bug was not yet triggered. Play it safe.
|
|
* script/trees: Don't check pre-existing builds in elf/ if `build.list` is
|
|
missing, otherwise it's too soon and builds are prevented in the first place;
|
|
this was caused initially when supporting out-of-source builds for single-tree
|
|
projects, as was already done on multi-tree. Now this is fixed.
|
|
* Documentation: only define the Untitled Static Site Generator
|
|
in `config/git` - the dependencies (markdown files and images) are now
|
|
defined in config/submodules/ instead. This prevents the bug where you could
|
|
download one of the dependencies first which would make the main project,
|
|
Untitled, un-downloadable, since the dependency projects go in subdirectories
|
|
of the main project that depends on them.
|
|
* Handle serprog dependencies in config/submodule instead of relying on
|
|
the git submodule update command, and only provide necessary modules. This
|
|
prevents the bug where downloading a dependency first later prevented the
|
|
main project from being downloaded, if the dependency was in a subdirectory
|
|
of what depends on it.
|
|
* Build coreboot utilities on a number of threads as defined by `XBMK_THREADS`;
|
|
although they already compiled, they would always do so on a single thread,
|
|
which is considered a bug. Now they can be compiled on multiple threads.
|
|
* include/lib.sh: Don't use `./update trees -f` to build coreboot *utilities*,
|
|
because it's quite error prone and not what that script is designed to do;
|
|
it is only designed to operate based on strictly defined single- and
|
|
multi-tree projects. Instead, call `make` directly.
|
|
* Don't use the presence of a `build.list` file to detect a multi-tree project
|
|
when running `./update trees`; instead, check the presence of `target.cfg`
|
|
down one level from `config/project/`, so: `config/project/*/target.cfg`
|
|
instead of `config/project/target.cfg`. This way, if someone working on lbmk
|
|
accidentally adds that `build.list` file in the wrong place, lbmk won't
|
|
become unusable. This also means that single-tree projects can now provide
|
|
a `build.list` file! (and some of them now do - look at the features section
|
|
on this page)
|
|
* Move check for *root user* to include/lib.sh, *before* the version/versiondate
|
|
files are written; these files need to be writeable by the standard user,
|
|
otherwise lbmk will exit. If you run lbmk as root, except when running the
|
|
dependencies command, it exits with error status; ironically, that very same
|
|
check then prevented running as root-root, causing lbmk to become unusable
|
|
until those files were either deleted or had ownership changed. This fix
|
|
prevents the bug from occuring ever again, but people who were previously
|
|
affected still have to fix these files (if they were written as root).
|
|
* Move dependency handling to include/lib.sh, *before* the version/versiondate
|
|
files are written, and *exit* before they are written; this prevents writing
|
|
the version/versiondate files as root, which previously occured when running
|
|
a command such as `./build dependencies debian` (installs build dependencies
|
|
from apt-get on a Debian machine). This bug ironically prevented lbmk from
|
|
running at all, under such conditions, because the dependencies script
|
|
required root, but lbmk exits with error status if running anything else as
|
|
root, and if version/versiondate are owned by root, that prevents lbmk from
|
|
running because writing to these files is the first thing it does, so an exit
|
|
with error status would otherwise occur.
|
|
* config/git/: Bump to a newer revision of Untitled (static site generator),
|
|
which thereby also imports the same fix as described in the next bullet
|
|
point below, because Untitled had (and now no longer has) the exact same bug.
|
|
* include/lib.sh: check environmental variables properly, for example
|
|
check that `${XBMK_RELEASE+x}` isn't unset; it was previously grepping
|
|
the output of `set`, which led to a bug report by a user who had the
|
|
variable `TMUX_TMPDIR` set, whereas `TMPDIR` was unset and lbmk was checking
|
|
the latter; in this example, the bug caused lbmk to act as though `TMPDIR`
|
|
was set, when it in fact wasn't, and code that used it then crashed because
|
|
lbmk does `set -u -e` (and it does this precisely to catch such bugs like the
|
|
one you're reading about now so that they can be fixed, like this one was!)
|
|
* **Re-configured GRUB so that only the Haswell and Broadwell machines contain
|
|
xHCI support**, where it doesn't cause any issues (and is required), while
|
|
other mainboards use a version of GRUB that lacks support for xHCI. This is a
|
|
mitigations against the bug reported in [lbmk
|
|
issue 216](https://codeberg.org/libreboot/lbmk/issues/216). This is done, by
|
|
using the new *multi-tree* GRUB handling, which is mentioned above in
|
|
in the section (of this audit report) pertaining to *feature changes*, whereby
|
|
each mainboard can have its own GRUB revisions and patches, with its own
|
|
GRUB configuration file (that could be uniquely optimised for it).
|
|
* **Fix vboot build issue when running lbmk in i686 (32-bit) host machines**.
|
|
The patch, courtesy of *Luke T. Schumaker*, adapts vboot's vmlinuz extract
|
|
function so that it uses pointer logic directly, instead of defining
|
|
integers (of type `ssize_t`) which, the way it was written, caused GCC to
|
|
believe that there would be a buffer overflow in code; the new code is more
|
|
robust and should prevent such an issue. This is both an *acute* bug fix,
|
|
fixing a bug that was actually triggered, and a preventative bug fix as the
|
|
original code wasn't correct either, even on AMD64 hosts (where it happened
|
|
to compile anyway).
|
|
* include/vendor.sh: Skip a given blob if the path to it is `/dev/null` - this
|
|
fixes a bug exposed by the previous change two bullet points down (fine
|
|
grained error control), because VGA ROMs are handled but the KGPE-D16 target
|
|
mitigates a crash bug when PIKE2008's option ROM is executed by SeaBIOS, by
|
|
inserting fake (empty) option ROMs for it into CBFS, and it does so by
|
|
telling coreboot to insert a *VGA option ROM* with the correct PCI device
|
|
and vendor ID, pointing (you guess it) to *`/dev/null`*. This makes the
|
|
KGPE-D16 target now return (when run through `./vendor download`) with zero
|
|
status, instead of error status.
|
|
* Do not allow dashes in coreboot target names, to mitigate a bug exposed by
|
|
the previous change listed below (regarding fine-grained error control). This
|
|
fixes build errors such
|
|
as: `include/lib.sh: line 115: kcma-d8-rdimm=config/vendor: No such file or directory`;
|
|
dashes were replaced with underscores, on those target names.
|
|
* include/vendor.sh: Much more fine-grained error control, when running
|
|
the `download` command. Certain parts need sh error handling to be less
|
|
strict, so `set +u +e` is used; when it's safe to turn on strict error
|
|
handling again, `set -u -e` is used. It used to be that `set +u +e` was the
|
|
only behaviour, when running this command. This actually exposed a number
|
|
of bugs that were previously hidden.
|
|
* include/vendor.sh: Don't exit with error status when running those commands
|
|
on a target that has no configs; instead, skip those targets.
|
|
* **GRUB: Never run it as a primary payload on any target but QEMU**. This is
|
|
a preventative bug fix, after lbmk bug report issue 216:
|
|
<https://codeberg.org/libreboot/lbmk/issues/216> - although it was caused by
|
|
the xHCI patches, and only happened on Sandybridge hardware, and although
|
|
this was later removed on those boards, GRUB is very complex and likely has
|
|
a lot of memory corruption issues. SeaBIOS is more reliable, so: Libreboot
|
|
only provides *SeaBIOS* as primary payload, but allows you to execute GRUB
|
|
from the SeaBIOS menu (the very same GRUB). Additionally: lbmk already
|
|
supported a configuration whereby SeaBIOS reads a `bootorder` file in CBFS,
|
|
making it try to run the GRUB payload first, while still allowing you to
|
|
interrupt by pressing ESC to bring up an alternative boot select menu. This
|
|
is now the *default*, on all x86 mainboards. This is a mitigation against
|
|
future instability in GRUB because, if such issues happen again, it will not
|
|
cause a brick since you can just use SeaBIOS instead, and skip booting to
|
|
the GRUB payload (on the affected machines, BIOS GRUB still worked, which
|
|
your distro provides and SeaBIOS executes it). *NOTE: GRUB was later made
|
|
into a multi-tree project, with certain mainboards using a version that
|
|
has the xHCI patches, if required, because the machines that actually need
|
|
xHCI support were not affected by the bug referenced in issue 216.*
|
|
* Main build script: Check SUID before checking Git name/email, otherwise the
|
|
version/versiondate files could be written as root and thus prevent building
|
|
of lbmk, which (for most commands) is intentionally engineered to exit (with
|
|
error status) if you run it as root.
|
|
* script/trees: Reset variable `makeargs` per target, so as to prevent
|
|
pollution of this variable when switching from one build target to the next.
|
|
* script/trees: Added `UPDATED_SUBMODULES=1` to the make command when running
|
|
any coreboot `make` command, to prevent coreboot from automatically fetching
|
|
certain Git submodules; this is a preventative fix, fixed before it became
|
|
a bug, which it likely would have become at some point as this is exactly
|
|
what the coreboot build system does!
|
|
* Main build script: hide the output of `git init` when lbmk re-initialises the
|
|
Git history, to prevent its output from being wrongly inserted into the
|
|
output of commands such as `./build roms list` - such pollution would cause
|
|
build errors, so it's important that the Git initialisation function either
|
|
doesn't output anything, or that it should cause an *exit* if output is to be
|
|
required.
|
|
* Added the `CHANGELOG` file to `.gitignore`. This means `./update release`
|
|
will now work, on release archives, because lbmk re-initialises Git history
|
|
when doing so, but the CHANGELOG file (when present) causes lbmk to skip
|
|
all source downloads (which the release builder relies on).
|
|
* **Fix garbled output on 1440x900 monitors when using the Dell Latitude E6400.**
|
|
The E6400 uses a reference clock (`DPLL_REF_SSCLK`) set to 100MHz, whereas
|
|
libgfxinit assumed 96MHz. This timing descrepancy did not cause an issue on
|
|
lower resolution displays, so we never caught it in earlier testing. Patch
|
|
courtesy of Nicholas Chin, who debugged this issue alongside the user who
|
|
reported it. It was fixed by making such timing configurable, within the
|
|
coreboot build system, setting it to 100MHz on Dell Latitude E6400.
|
|
* script/roms: Skip a target when its config directory is missing, so that
|
|
running a coreboot target with no configs in it will not yield an error;
|
|
instead, it will now cause a non-error return.
|
|
* include/option.sh: If `.git` is missing, in a bare copy of lbmk (not a
|
|
release archive), recreate the version/versiondate files manually so as to
|
|
prevent a build error. Use of `lbmk.git` or the release archives is
|
|
recommended, but some users directly download snapshots of `lbmk.git` from
|
|
sites such as Codeberg, and there's no way for us to turn off this feature;
|
|
even if we did, it may be present on other Git hosting sites, where users
|
|
might host their own copy of lbmk.
|
|
* include/option.sh: Don't return non-zero status from the function
|
|
named `mkrom_tarball`, because certain other functions rely on its return
|
|
value to always be *zero*; instead, call `err` which will then yield
|
|
an *exit* (with non-zero status). This means that the function will now
|
|
always *return* zero, when it returns.
|
|
* include/vendor.sh: Print an error message when the target is ill-defined,
|
|
for downloading and/or insertion of vendor files.
|
|
* include/git.sh: Remove `.git` directories *per-project*, as and when each
|
|
project is being downloaded, instead of having it done all in bulk by the
|
|
main build script. This kicks in when `XBMK_RELEASE` is set (release builds),
|
|
to correct the over-use of disk space during such very large builds processes.
|
|
This makes the build system less likely to OOM when running it inside tmpfs.
|
|
* Main build script: initialise Git history *before* running any command,
|
|
because this is required for reliable use of the coreboot build system, which
|
|
the *inject* command makes heavy use of. This reduces the number of errors,
|
|
when running these commands from a release archive, where lbmk re-initialises
|
|
a new Git history when you run it for the first time.
|
|
* Main build script: define `xp` as a global variable, to prevent it from
|
|
being lost between functions.
|
|
* Fixed missing deletion of strlcat.c in U-Boot sources
|
|
* script/roms: Create full release tarball name, when generating releases.
|
|
* Main build script: exit (with error status) if not running directly from
|
|
the root of the lbmk work directory.
|
|
|
|
General code cleanup
|
|
--------------------
|
|
|
|
In addition to *general* very sweeping code cleanup, condensing code lines
|
|
where possible and so on:
|
|
|
|
* include/lib.sh: Simplified the `download` function (used for crossgcc tarballs).
|
|
* include/lib.sh: Simplified the `singletree` function.
|
|
* include/git.sh: Simplified the `link_crossgcc` function.
|
|
* include/git.sh: Simplified the `nuke` function, because it was over-engineered
|
|
to the extreme. Now it's more reasonable.
|
|
* include/lib.sh: Move download logic here from include/vendor.sh, for the
|
|
feature where *files* can be downloaded as submodules, within Git repositories.
|
|
Please read the notes about this in the *features* section.
|
|
* include/lib.sh: Shortened a string in the `e` function, so that the line
|
|
does not exceed a length of 80 characters.
|
|
* include/git.sh: Unified the handling of git clone/reset/am commands into a
|
|
single function, rather than duplicating the same logic across multiple
|
|
functions.
|
|
* script/trees: simplify the `copy_elf` function; don't create the elf directory,
|
|
create one defined by `dest_dir` instead (which is the elf directory with
|
|
the subdirectory for that project concatenated). Only create it within
|
|
the `copy_elf` function, which is only called if actually compiling the
|
|
code. This avoids creating empty directories under elf/, for example under
|
|
fault conditions.
|
|
* include/git.sh: Additional code cleanup, removing certain code that was in
|
|
place because the code used to handle both `git submodule update` and the
|
|
custom *override* logic for submodules; now only the override is used, at all
|
|
times, so the code was cleaned up and optimised only for this.
|
|
* include/git.sh: Reduced code indentation in function `fetch_submodule`.
|
|
* include/git.sh: Renamed a few variables for increased code clarity.
|
|
* script/trees: Unified handling of coreboot `makeargs`.
|
|
* Moved function `handle_coreboot_utils` to script/trees (and renamed it
|
|
to `check_coreboot_utils`), as it's only ever used from there.
|
|
* Moved variable `cbcfgsdir` to include/vendor.sh, because it's only used there.
|
|
* Moved cfgsdir/datadir variables to include/lib.sh, because it's also used
|
|
from script/roms and script/trees; unify them under a common location.
|
|
* Handle `build.list` from config/data/, not config/ - this avoids needing to
|
|
check for `build.list` in the `items` function on include/lib.sh, and it is
|
|
now avoided.
|
|
* include/lib.sh: More user-friendly output from the `e` function, telling the
|
|
user whether or not a file/directory exists. This is regularly used, for
|
|
example when trying to download a project and the source code was already
|
|
prepared.
|
|
* U-Boot on QEMU: removed the (currently) unused x86 target.
|
|
* grub.cfg: Split function `try_user_config` into multiple smaller functions.
|
|
* grub.cfg: Don't scan ESP on btrfs subvols as the ESP is always on a FAT32
|
|
partition. This saves time during the bootup sequence.
|
|
* include/vendor.sh: Remove unnecessary assignment; `dl_fail` was being set
|
|
to `n` and then immediately to `y`. Now it is simply set to `y`.
|
|
* Renamed include/option.sh to include/lib.sh
|
|
* Main build script: simplified the logic for Git repository initialisation
|
|
by *returning non-zero status*, instead of calling err, and handling this
|
|
return status in the calling function.
|
|
* Main build script: condensed the logic for Git name/email checking into a
|
|
simply for loop running `eval`, rather than having lots of separate but very
|
|
similar Git commands.
|
|
* script/trees: Removed a few unused variables.
|
|
* include/git.sh: Moved logic for copying a Git repository to a new function.
|
|
* include/git.sh: Moved function `link_crossgcc` to a different location
|
|
within the file, for proper top-down order of logic (required as per the
|
|
lbmk coding style).
|
|
* include/git.sh: Split logic for crossgcc symlinking into its own function.
|
|
* include/git.sh: Skip submodule checks if `.gitmodules` missing (NOTE: later
|
|
replaced with custom submodule handling in lbmk).
|
|
* include/git.sh: Merged `patch_submodules` in `prep_submodules` (NOTE: ditto
|
|
to the same note below).
|
|
* include/git.sh: Split up submodule handling into a new function (NOTE: support
|
|
for submodules was later replaced with custom logic in lbmk).
|
|
* include/git.sh: Shortened a few variable names.
|
|
* include/git.sh: Removed redundant check for the existence of the patches
|
|
directory, when patching a given project. This is unnecessary, where it was
|
|
removed, because the patching function itself also checks this. Reduction
|
|
in code size by *one line*.
|
|
* include/git.sh: Removed function `fetch_from_upstream` and merged its logic
|
|
into calling function `fetch_project_trees`, the only calling function, since
|
|
the logic in `fetch_from_upstream` was very small and splitting made no sense.
|
|
* include/option.sh: Renamed `mktar_release` to `mkrom_tarball`.
|
|
* script/roms: Renamed function `moverom` to `copyrom`, because it runs `cp`,
|
|
not `mv`, therefore is is *copying* a file, not moving it.
|
|
* script/roms: Simplified the logic for listing available serprog build targets.
|
|
* script/roms: General simplification of configuration handling for payloads.
|
|
* include/vendor.sh: Removed duplicated (and unnecessary) config check,
|
|
because it was already done immediately afterward (I accidentally did the
|
|
same check twice, in immediate succession).
|
|
* include/vendor.sh: General simplification of defconfig handling logic.
|
|
* Main build script: removed the `excmd` function and merged its logic into
|
|
the `main` function, and then `main` was cleaned up significantly.
|
|
* Main build script: don't make `script_path` a global variable; this allowed
|
|
a reduction in code size by precisely *one line of code*.
|
|
* Made certain variables generic (lbmk and LBMK variables are now xbmk
|
|
and XBMK respectively). The same change has been made in Canoeboot; this
|
|
single change makes merging patches between Libreboot/Canoeboot much easier,
|
|
by reducing the number of merge conflicts during `git cherry-pick`.
|
|
* Main build script: merged the functionality of function `check_git` into
|
|
the `main` function, then deleted function `check_git` (which was in
|
|
the file include/option.sh).
|
|
* Main build script: general simplification of the logic handling source code
|
|
downloads in function `fetch_trees`.
|
|
* Main build script: Use `UTC+0000` when initialising git repository commit
|
|
dates (for initial commits).
|
|
* Removed the `check_project` function, and placed its logic directly
|
|
inside `include/option.sh` so that it automatically runs in every script
|
|
that sources it.
|
|
* Main build script: General cleanup on the code handling file deletions
|
|
under function `fetch_trees`.
|
|
* Main build script: delete function `mkversion` and, in its calling function,
|
|
simply print the string contained in variable `relname`.
|
|
* Main build script: general cleanup on the logic that handles tarballs.
|
|
* Main build script: Remove `mkrom_images`, and move its logic into the only
|
|
calling function within that same file.
|
|
* include/option.sh: Removed the function `insert_version_files` and merged
|
|
its logic into its only calling function.
|
|
* Unified all logic for handling SHA512 checksums, placing it inside
|
|
include/option.sh for use elsewhere.
|
|
* Move image tarball generation to script/roms (formerly script/build/roms).
|
|
* Removed redundant function `extract_ref` from include/mrc.sh
|
|
* Removed an errant comment from include/git.sh
|
|
* Switched to a one-level directory structure for main scripts, rather than
|
|
two-level; for example, script/build/roms is now script/roms
|
|
* Merged scripts under script/vendor/ into include/vendor.sh and stub it
|
|
from the main build script
|
|
* Merged script/update/release into the main build script
|
|
* Merged script/build/serprog into script/build/roms
|
|
* script/build/roms: remove unnecessary command (errant return)
|
|
* Merged include/err.sh with include/option.sh, into include/option.sh
|
|
* script/build/roms: fixed improper use of variable outside a function
|
|
* build/build/roms: more reliable exit status in `skip_board()`
|
|
* script/build/roms: split up `main()` into multiple smaller functions
|
|
|
|
Revision updates
|
|
================
|
|
|
|
Some revisions were updated as part of standard routine, but happened to be
|
|
done during this audit. Those updates are as follows:
|
|
|
|
SeaBIOS
|
|
-------
|
|
|
|
Bump SeaBIOS to revision `e5f2e4c69643bc3cd385306a9e5d29e11578148c`, which has
|
|
these changes relative to the old one:
|
|
|
|
```
|
|
* e5f2e4c6 pciinit: don't misalign large BARs
|
|
* 731c88d5 stdvgaio: Only read/write one color palette entry at a time
|
|
* c5a361c0 stdvga: Add stdvga_set_vertical_size() helper function
|
|
* 22c91412 stdvga: Rename stdvga_get_vde() to stdvga_get_vertical_size()
|
|
* 549463db stdvga: Rename stdvga_set_scan_lines() to stdvga_set_character_height()
|
|
* c67914ac stdvga: Rename stdvga_set_text_block_specifier() to stdvga_set_font_location()
|
|
* aa94925d stdvga: Rework stdvga palette index paging interface functions
|
|
* 8de51a5a stdvga: Rename stdvga_toggle_intensity() to stdvga_set_palette_blinking()
|
|
* 96c7781f stdvga: Add comments to interface functions in stdvga.c
|
|
* 2996819f stdvga: Rename CGA palette functions
|
|
* 91368088 stdvgamodes: Improve naming of dac palette tables
|
|
* 70f43981 stdvgamodes: No need to store pelmask in vga_modes[]
|
|
* 1588fd14 vgasrc: Rename vgahw_get_linesize() to vgahw_minimum_linelength()
|
|
* d73e18bb vgasrc: Use curmode_g instead of vmode_g when mode is the current video mode
|
|
* 192e23b7 vbe: implement function 09h (get/set palette data)
|
|
* 3722c21d vgasrc: round up save/restore size
|
|
* 5d87ff25 vbe: Add VBE 2.0+ OemData field to struct vbe_info
|
|
* 163fd9f0 fix smbios blob length overflow
|
|
* 82faf1d5 Add LBA 64bit support for reads beyond 2TB.
|
|
* 3f082f38 Add AHCI Power ON + ICC_ACTIVE into port setup code
|
|
* 3ae88886 esp-scsi: terminate DMA transfer when ESP data transfer completes
|
|
* a6ed6b70 limit address space used for pci devices.
|
|
```
|
|
|
|
Flashprog
|
|
---------
|
|
|
|
Updated to revision 5b4fdd1 from 2 May 2024, rebasing the MX workaround patch.
|
|
|
|
This imports upstream changes, relative to the previous revision:
|
|
|
|
```
|
|
* 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347
|
|
* 72c9e40 meson: Check for CPU families with known raw mem access
|
|
* 3458220 platform/meson: Port pciutils/pci.h workaround to Meson
|
|
* f279762 platform/meson: Check for libi386 on NetBSD
|
|
* 14da5f7 README: Convert to Markdown
|
|
* 8ddea57 README: Document branching and release policy
|
|
* 2522456 util/list_yet_unsupported_chips.sh: Fix path
|
|
* cbf9c11 spi: Don't cross 16MiB boundaries with long writes
|
|
* 823a704 dediprog: Skip warning on first attempt to read device string
|
|
* e8463c8 dediprog: Revise prefix check for given programmer id
|
|
* 38af1a1 dediprog: Revise id matching
|
|
* 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting
|
|
* cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting
|
|
* 7679b5c spi25: Replace spi_read_chunked() with more abstract version
|
|
* ca1c7fd spi25: Normalize parameters of spi_nbyte_read()
|
|
* e36e3dc dediprog: Use default_spi_write_256
|
|
* 522a86d linux_spi: Use default_spi_read()/_write_256()
|
|
* 806509b cli_classic: Turn progress reporting into a progress bar
|
|
* 842d678 libflashrom: Return progress state to the library user
|
|
* aa714dd flashprog.c: Let select_erase_functions() return byte count
|
|
* 2eed4cf serprog: Add SPI Mode and CS Mode commands
|
|
* 821a085 dediprog: Implement id reading for SF600 and later
|
|
* 274e655 dediprog: Read device string early
|
|
* 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2
|
|
* fb176d2 dediprog: Use more general 4BA write mode for newer protocols
|
|
* 0ab5c3d dediprog: Split device type and version parsing
|
|
* bdef5c2 dediprog: Use unsigned conversions to parse device string
|
|
* 5262e29 dediprog: Try to request 32B device string (instead of 16B)
|
|
* e76e21f dediprog: Get rid of some unnecessary hex constants
|
|
* 5a09d1e udelay: Lower the sleep vs delay threshold
|
|
* 03ad4a4 linux_mtd: Provide no-op delay implementation
|
|
* 211c6ec serprog: Refine flushing before synchronization
|
|
* 383b7fe serprog: Test synchronicity before trying to synchronize
|
|
* d7318ea serprog: Move synchronicity test into separate function
|
|
* 9a11cbf Let the flash context directly point to the used master
|
|
* aabb3e0 writeprotect: Hook wp functions into the chip driver
|
|
* 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode`
|
|
* 929d2e1 internal: Pass programmer context down into chipset enables
|
|
* 7c717c3 internal: Pass programmer context down into board enables
|
|
* e3a2688 Pass programmer context to programmer->init()
|
|
* 2b66ad9 Start implementing struct flashprog_programmer
|
|
* 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME
|
|
* b197402 memory_bus: Split register mapping into own function
|
|
* 0e76d99 memory_bus: Move (un)map_flash_region into par master
|
|
* 9eec407 Perform default mapping only for respective chips
|
|
* 56b53dd wbsio_spi: Request memory mapping locally
|
|
* 5596190 it87spi: Request memory mapping locally
|
|
* 46449b4 spi25: Drop stale `bus == SPI` guards
|
|
* ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook
|
|
* 901fb95 Add prepare/finish_access() hooks for chip drivers
|
|
* a96aaa3 dediprog: Support long writes of 16MiB and more
|
|
* 1338936 Consider 4BA support when filtering erase functions
|
|
* 8d36db6 flashprog.8: Fix up serprog example
|
|
* d2ac303 flashprog.8: document new serprog cs parameter
|
|
* d1b9153 chipset_enable.c: Add Genoa to mendocino entry
|
|
```
|
|
|
|
As a reminder:
|
|
|
|
Libreboot now uses Flashprog instead of Flashrom; Flashprog is a fork of
|
|
Flashrom, lead by Nico Huber after a dispute with the new leadership of
|
|
Flashrom, and it was felt that Flashprog is a better choice for Libreboot.
|
|
|
|
Git log
|
|
=======
|
|
|
|
This entire set of changelogs is based on the precise Git history in lbmk,
|
|
relative to Libreboot 20240504 which is from where the audit began.
|
|
|
|
The latest changes are listed first, going all the way down to earlier changes:
|
|
|
|
```
|
|
* 2ee186ae minor code cleanup in the build system
|
|
* c5441bb9 re-add ability to use cbfs grub.cfg as default
|
|
* d33556c6 trees: exit with error if project undefined
|
|
* 1799a336 build: also make a lock file during release build
|
|
* 78426a97 lib.sh: more useful lock message
|
|
* e80c4b73 create a lock file during builds
|
|
* a0710ef9 git.sh: hide e() output on for loop
|
|
* 86eb566b lib.sh: fix regression
|
|
* fbcdf33f git.sh: download xtree *before*, not after
|
|
* 6a3d8a96 git.sh: fix deletion path in nuke()
|
|
* 3478b288 lib.sh: less confusing error in download()
|
|
* f3f5b99c lib.sh: hide stderr on download()
|
|
* 3440e1f6 lib.sh: simplify download()
|
|
* 75b39dbe lib.sh: fix redundancy in download()
|
|
* 26df6e7a lib.sh: simplify singletree()
|
|
* 9cdf4192 git.sh: further simplify nuke()
|
|
* 1cede024 git.sh: simplify link_crossgcc()
|
|
* 77e482aa git.sh: simplify nuke()
|
|
* 42e97950 Merge pull request 'Add dependency scripts for Fedora 40 and Ubuntu 24.04' (#220) from fuel-pcbox/lbmk:master into master
|
|
|\
|
|
| * 046007b4 Add dependency scripts for Fedora 40 and Ubuntu 24.04
|
|
* | a0eb79df add crossgcc tarballs to config/submodules/
|
|
* | b0d1ad32 git.sh: support downloading *files* as submodules
|
|
* | 1a44fcfa git.sh: remove unnecessary line break
|
|
* | 74ae84af vendor.sh: add a return at the end of mkdirs
|
|
* | c202dc61 vendor.sh: move download logic to lib.sh
|
|
* | 08d0a1d5 lib.sh: shorten a string in e()
|
|
* | 9b00b30a move uefiextract to elf/uefitool/
|
|
|/
|
|
* 05d301bd git.sh: fix submodule path
|
|
* 7e15859b git.sh: simplify prep_submodules()
|
|
* acd3608b git.sh: unified handling of git clone/reset/am
|
|
* 668bcbf6 trees: simplified copy_elf() handling
|
|
* 3eef7f37 git.sh: simplify submodule handling
|
|
* 4b1b1f50 git.sh: provide feedback for repository downloads
|
|
* d4324768 git.sh: download "depend" projects *before*
|
|
* a4549e93 git.sh: reduced indentation in fetch_submodule
|
|
* 11c47ba7 git.sh: reduced indentation in prep_submodules
|
|
* 9c1ea8f9 git.sh: *never* run git submodule update
|
|
* 137321eb lib.sh: rename variable for clarity
|
|
* 7bfb1d62 trees: don't check empty path in copy_elf()
|
|
* 0b7566cb trees: fix build issue caused by bad elf check
|
|
* 7aa9f224 trees: fix listfile check in copy_elf()
|
|
* 06c78e13 trees: don't say check elf/ if build.list missing
|
|
* dea41f13 trees: don't do elfcheck if build.list missing
|
|
* 3bd562a2 define mdfiles/images in config/submodules/docs/
|
|
* bff75628 libopencm3 to config/submodules/ on stm32-vserprog
|
|
* d9b9f6db add tinyusb to config/submodule/ for pico-sdk
|
|
* 099ee3f4 config/git: use "depend" for serprog dependencies
|
|
* d0f99c2f trees: unified coreboot makeargs
|
|
* a7889c5a trees: use multiple threads to build cbutils
|
|
* d41658f1 move handle_coreboot_utils to script/trees
|
|
* c0822ac4 put coreboot utils in elf/, not cbutils/
|
|
* d1ba0851 fix build issue building coreboot utils
|
|
* 7e49fe4b trees: skip single-tree build if a build exists
|
|
* 12774274 use correct memtest86plus path in script/roms
|
|
* 8511615e put memtest86plus builds in elf/memtest86plus/
|
|
* 176b936d put flashprog builds in elf/flashprog/
|
|
* 48cbb30d trees: also print "DONE! check elf/dir" on single
|
|
* 315fed5f trees: handle build-test on multi-tree projects
|
|
* b8112af9 git.sh: use singletree() to decide submodules
|
|
* 78f7e429 move cbcfgsdir variable to vendor.sh
|
|
* 810ad480 move cfgsdir/datadir variables to lib.sh
|
|
* ba36f26d handle build.list from config/data/, not config/
|
|
* bea089bb don't use build.list to detect multi-tree projects
|
|
* 6e1b8087 move id check to lib.sh too
|
|
* 62c25ac7 move root check to lib.sh (bugfix)
|
|
* 75382a41 bugfix: move dependencies handling to lib.sh
|
|
* c6aff769 bump untitled revision again
|
|
* 414a605a bump untitled revision in git config
|
|
* 7d562679 lib.sh bugfix: check environmental variables right
|
|
* 53dd4bc4 lib.sh: more friendly output from e()
|
|
* c2793e7a badcmd: don't print "no context given"
|
|
* 49ae4f91 badcmd: link directly to the maintenance manual
|
|
* 00653aab better help text on invalid commands
|
|
* afac9a06 build: print the project website address on help
|
|
* 1e534e7d add projectsite file: point to libreboot.org
|
|
* 429e91f9 make GRUB multi-tree and re-add xhci patches
|
|
* 9daf7f05 u-boot on qemu: remove currently unused x86 target
|
|
* 6d59f1d0 grub.cfg: scan /boot/grub.cfg last
|
|
* 2becc736 grub.cfg: scan grub2/ last
|
|
* cfc5265f grub.cfg: search a reduced list of devs/partitions
|
|
* 42b5b58d grub.cfg: scan grub.cfg from ESP
|
|
* b3d58f1e grub.cfg: split up try_user_config
|
|
* 2ea5e61c grub.cfg: don't search for *_grub.cfg
|
|
* c742a89d grub.cfg: remove unnecessary path for isolinux
|
|
* e0b2216f grub.cfg: don't scan EFI on btrfs subvols
|
|
* 38135f9e Merge pull request 'Fix building vboot on i686' (#218) from lukeshu/lbmk:lukeshu/i686 into master
|
|
|\
|
|
| * 221206b4 Fix building vboot on i686
|
|
* | a76dda93 vendor.sh: remove unnecessary assignment
|
|
* | 17a9d11d git.sh: do not remove .submodules
|
|
* | 13d4b6d3 delete u-boot test/lib/strlcat.c using nuke()
|
|
* | f6cbc501 import nuke() from cbmk cdce8ba70b
|
|
|/
|
|
* 7fbcb7be coreboot t440p/w541: enable nvme in grub_scan_disk
|
|
* 47f582d4 ./vendor download: skip if blob path is /dev/null
|
|
* e7cb10d6 do not allow dashes in coreboot target names
|
|
* e9b9e825 ./vendor download: more fine-tuned error control
|
|
* 0dd0dfaf vendor.sh: don't error on main targets
|
|
* a4bd49de roms: allow user override of grub_scan_disk
|
|
* b00800a7 grub.cfg: actually support setting boot order
|
|
* 4488745c trees: use CPUS=x on regular coreboot make
|
|
* 7d50e09f update gitignore
|
|
* b78f62c7 roms: fix bad eval when comparing options
|
|
* b11e4c9f grub.cfg: add spdx header
|
|
* 3998a3ba re-configure grub_scan_disk on various targets
|
|
* 1c4d6498 remove grub_scan_disk in all target.cfg files
|
|
* e1883f1d grub.cfg: use grub_scan_disk to set boot order
|
|
* c94cecd8 GRUB: remove XHCI patches for now (will re-add)
|
|
* ff2997d6 minor correction
|
|
* d855408a roms: make grubfirst if seabios_withgrub=y
|
|
* ec761c88 coreboot: only run GRUB as a secondary payload
|
|
* 64c64bcf flashprog: bump to 5b4fdd1 from 2 May 2024
|
|
* 914852dd rename include/option.sh to include/lib.sh
|
|
* dc7b72f3 roms: rename bstr variable
|
|
* 5c14e8e1 general code cleanup in the build system
|
|
* 48c2cef8 build: simplify git_init()
|
|
* db06bbdb build: do root check before git check
|
|
* 8d199a31 build: simplify git checks
|
|
* 8da2559b option.sh: fix bad check for version/versiondate
|
|
* d32968c7 trees: reset makeargs per target/project
|
|
* 7bab0cf9 trees: also use UPDATED_SUBMODULES=1 on crossgcc
|
|
* 0a50eaf2 trees: add UPDATED_SUBMODULES to coreboot make
|
|
* ff0840bd trees: write -C on the make command first not last
|
|
* b91ee727 config: add backup coreboot submodule repositories
|
|
* 4a3ebe84 coreboot/default: remove chromeec from module.list
|
|
* 9c5890e9 git.sh: break if a submodule clone succeeds
|
|
* fdb08143 coreboot: only download the necessary submodules
|
|
* 1cb255e8 git.sh: allow finer control of git submodules
|
|
* 5d87eea7 build: hide git-init output
|
|
* b8ec7d56 option.sh: generate version file if .git not found
|
|
* 87c361f3 update/trees: remove unused variable
|
|
* da427272 git.sh: move repo copying to a new function
|
|
* 093c4a36 git.sh: move link_crossgcc to end of file
|
|
* 73a2d991 git.sh: move xgcc linking to a new function
|
|
* d7749876 git.sh: skip submodules if .gitmodules missing
|
|
* c3e1aa34 git.sh: merge patch_submodules in prep_submodules
|
|
* a4163330 git.sh: split submodule handling to new function
|
|
* aa4faf08 git.sh: remove errant line break
|
|
* 00142696 git.sh: remove another meaningless check
|
|
* fc3b0ba8 git.sh: shorter variable names
|
|
* dae10dd4 git.sh: remove meaningless check
|
|
* c148fa53 git.sh: remove variable not meaningfully used
|
|
* 079afb5b add CHANGELOG to .gitignore
|
|
* 0d8781ef Merge pull request 'Fix E6400 display reference clock patches' (#214) from nic3-14159/lbmk:fix-e6400-igpu-ref-clock into master
|
|
|\
|
|
| * 9f50e362 Fix E6400 display reference clock patches
|
|
|/
|
|
* e5a5935d fix building coreboot images on i686 hosts
|
|
* a2ac4d13 Merge pull request 'Also try unlocking encrypted volume on NVMe' (#213) from mkukri/lbmk:master into master
|
|
|\
|
|
| * 77ebd050 Also try unlocking encrypted volume on NVMe
|
|
* | 287d0555 Merge pull request 'Add NVMe support to GRUB2 payload' (#212) from mkukri/lbmk:master into master
|
|
|\|
|
|
| * abe6717c Add NVMe support to GRUB2 payload
|
|
* | 47d77c94 Merge pull request 'Fix E6400 display issue with 1440 x 900 panel' (#211) from nic3-14159/lbmk:fix-e6400-igpu-ref-clock into master
|
|
|\ \
|
|
| * | 8629873a Fix E6400 display issue with 1440 x 900 panel
|
|
| |/
|
|
* | 0beecd1b Merge pull request 'Add pt qwerty keymap to lbmk' (#210) from samuraikid/lbmk:master into master
|
|
|\ \
|
|
| * | 8d723d14 Add pt qwerty keymap to lbmk
|
|
* | | 835e5ad0 git.sh: fix invalid command in git_prep()
|
|
| |/
|
|
|/|
|
|
* | 1e54db29 git.sh: allow patching submodules
|
|
* | 00e00a18 git.sh: don't delete .git if src/project/project
|
|
* | 245b4eb2 build/roms: skip target if config/ dir missing
|
|
* | aadccc59 more minor cleanup in the build system
|
|
* | 5b8928c7 git.sh: remove fetch_from_upstream()
|
|
* | 71baf653 option.sh: don't return 1 in mkrom_tarball
|
|
* | 1fe9c4b8 option.sh: mktar_release to mkrom_tarball
|
|
* | cc7ed692 build/roms: rename moverom to copyrom
|
|
* | b40118ae minor code cleanup in the build system
|
|
|/
|
|
* 998f30ad build/roms: simplify serprog list command
|
|
* 21a7efaa build/roms: simplified config payload checks
|
|
* 5b5dccd6 vendor.sh: further simplify config handling
|
|
* 8418ea9a vendor.sh: greatly simplified config handling
|
|
* 53b394f5 vendor.sh: move config checks to detect_firmware
|
|
* bb7255c3 vendor.sh: print an error upon ill-defined target
|
|
* 3f73f3d0 vendor.sh: remove redundant check
|
|
* 32923f56 vendor.sh: simplify defconfig check
|
|
* f8e3ca3b git.sh: Remove .git if XBMK_RELEASE=y
|
|
* dd851caa build: remove initcmd() and simplify main()
|
|
* 4ea843a4 build: initialise git first (before commands)
|
|
* 5702f5a4 build: remove excmd() and simplify main()
|
|
* b76a70c3 build: don't make script_path a global variable
|
|
* 839ef680 lbmk: allow easier sync with cbmk
|
|
* 885fcebd remove help commands (user should read docs)
|
|
* c6ba0a0e option.sh: delete check_git()
|
|
* 313c4c01 build: define "xp" in the global variables
|
|
* 350857ff build: simplify for loop in fetch_trees()
|
|
* 8e05399d build: simplified downloads in fetch_trees()
|
|
* 914ff1ad ./build release: don't do u-boot-only archives
|
|
* 5c3fb9a4 build: use utc+0 when initialising git repo dates
|
|
* e281966f remove check_project() (always set variables)
|
|
* ee2bf0d2 build: simplify deletions in fetch_trees()
|
|
* 39df6230 build: delete mkversion() (just print relname)
|
|
* a40a6129 build/roms: clean up tarball handling
|
|
* e5ffb2af rm src/u-boot/*/test/lib/strlcat.c in u-boot
|
|
* c149cbb8 build: remove mkrom_images
|
|
* 4135ce5e build: use same tarball name on uboot-only release
|
|
* 189b70dd build/roms: create full release tarball name
|
|
* 36d45474 option.sh: don't bother checking for GNU tar
|
|
* f0b604fc option.sh: remove insert_version_files()
|
|
* 267c13cc cleanup: remove mkvdir
|
|
* 08c9f94a unified sha512sum creation for tarballs
|
|
* 1ce7e339 move rom tarball creation to script/roms
|
|
* 190495d2 disable x301 for next release (for now)
|
|
* 03fae0cf mrc.sh: remove redundant function extract_ref()
|
|
* f66ceef6 print two line breaks before confirming release
|
|
* cc339741 remove haswell mrc blob (libre raminit stable now)
|
|
* 05fbd392 remove all status checks. only handle release.
|
|
* 8ba0fd83 git.sh: remove errant comment
|
|
* d7ce26dc move script/*/* to script/
|
|
* 029291e5 merge script/vendor/* into include/vendor.sh
|
|
* c8fb24bb build: print usage for special commands
|
|
* 5f63b594 merge script/update/release into build
|
|
* e1ea5dd0 bump seabios to e5f2e4c69643bc3cd385306a9e5d29e11578148c
|
|
* 052414c0 build: further prevent non-lbmk-work-directory
|
|
* fb8d0c86 build: exit if not running from lbmk directory
|
|
* 38aaaecf build/roms: print serprog help
|
|
* e3cb3a40 merge script/build/serprog with script/build/roms
|
|
* 297af7e6 build/roms: remove unnecessary command
|
|
* 5e4009b5 merge include/err.sh with include/option.sh
|
|
* 58400fc4 err.sh: correct copyright info
|
|
* aa5937ed build/roms: don't rely on x in handle_target
|
|
* 580a5559 build/roms: don't use exit status from skip_board
|
|
* 2fcbff68 build/roms: split up main()
|
|
* d13d9308 build/roms: allow searching status by mismatch
|
|
```
|
|
|
|
This is 211 changes, since Libreboot 20240504.
|