48 lines
1.5 KiB
Markdown
48 lines
1.5 KiB
Markdown
---
|
|
title: Gigabyte GA-G41M-ES2L desktop board
|
|
...
|
|
|
|
This is a desktop board using intel hardware (circa \~2009, ICH7
|
|
southbridge, similar performance-wise to the Libreboot X200. It can make
|
|
for quite a nifty desktop. Powered by libreboot.
|
|
|
|
IDE on the board is untested, but it might be possible to use a SATA HDD
|
|
using an IDE SATA adapter. The SATA ports do work.
|
|
|
|
You need to set a custom MAC address in GNU+Linux for the NIC to work.
|
|
In /etc/network/interfaces on debian-based systems like Debian or
|
|
Devuan, this would be in the entry for your NIC:\
|
|
hwaddress ether macaddressgoeshere
|
|
|
|
Alternatively:
|
|
|
|
cbfstool libreboot.rom extract -n rt8168-macaddress -f rt8168-macaddress
|
|
|
|
Modify the MAC address in the file `rt8168-macaddress` and then:
|
|
|
|
cbfstool libreboot.rom remove -n rt8168-macaddress
|
|
cbfstool libreboot.rom add -f rt8168-macaddress -n rt8168-macaddress -t raw
|
|
|
|
Now you have a different MAC address hardcoded. In the above example, the ROM
|
|
image is named `libreboot.rom` for your board. You can find cbfstool
|
|
under `coreboot/default/util/cbfstool/` after running the following command
|
|
in the build system:
|
|
|
|
./build module cbutils
|
|
|
|
You can learn more about using the build system, lbmk, here:\
|
|
[Libreboot build instructions](../build/)
|
|
|
|
Flashing instructions can be found at
|
|
[../install/](../install/)
|
|
|
|
RAM
|
|
---
|
|
|
|
Kingston 8 GiB Kit KVR800D2N6/8G with Elpida Chips E2108ABSE-8G-E
|
|
|
|
this is a 2x4GB setup and these work quite well, according to a user on IRC.
|
|
|
|
Many other modules will probably work just fine, but raminit is very picky on
|
|
this board.
|