108 lines
4.3 KiB
Markdown
108 lines
4.3 KiB
Markdown
---
|
|
title: ASUS KFSN4-DRE server/workstation board
|
|
x-toc-enable: true
|
|
...
|
|
|
|
This is a server board using AMD hardware (Fam10h). It can also be used
|
|
for building a high-powered workstation. Powered by libreboot.
|
|
|
|
Flashing instructions can be found at
|
|
[../install/\#flashrom](../install/#flashrom)
|
|
|
|
Form factor {#formfactor}
|
|
===========
|
|
|
|
These boards use the SSI EEB 3.61 form factor; make sure that your case
|
|
supports this. This form factor is similar to E-ATX in that the size is
|
|
identical, but the position of the screws are different.
|
|
|
|
Flash chips {#flashchips}
|
|
===========
|
|
|
|
These boards use LPC flash (not SPI), in a PLCC socket. The default
|
|
flash size 1MiB (8Mbits), and can be upgraded to 2MiB (16Mbits).
|
|
SST49LF080A is the default that the board uses. SST49LF016C is an
|
|
example of a 2MiB (16Mbits) chip, which might work. It is believed that
|
|
2MiB (16Mbits) is the maximum size available for the flash chip.
|
|
|
|
*DO NOT hot-swap the chip with your bare hands. Use a PLCC chip
|
|
extractor. These can be found online. See
|
|
<http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>*
|
|
|
|
Native graphics initialization {#graphics}
|
|
==============================
|
|
|
|
Native graphics initialization exists (XGI Z9s) for this board.
|
|
Framebuffer- and text-mode both work. A serial port is also available.
|
|
|
|
Memory
|
|
======
|
|
|
|
DDR2 533/667 Registered ECC. 16 slots. Total capacity up to 64GiB.
|
|
|
|
Hex-core CPUs {#hexcore}
|
|
=============
|
|
|
|
PCB revision 1.05G is the latest version of this board and the best one
|
|
(the revision number is be printed on the board), if you want to use
|
|
dual hex-core CPUs (Opteron 2400/8400 series), though only two board
|
|
configurations are believed to support them. Other revisions are
|
|
believed to only support dual quad-core CPUs.
|
|
|
|
To be sure your board supports a CPU check the official ASUS website here:
|
|
<https://www.asus.com/support/cpu_support>. Note: not all CPUs are listed.
|
|
|
|
If you are running a Hex-Core CPU on any board version, please contact us.
|
|
|
|
Board configurations {#configurations}
|
|
==============
|
|
There are 7 different configurations of this board: "standard", 2S, iKVM,
|
|
iKVM/IST, SAS, SAS/iKVM and SAS/iKVM/IST.
|
|
|
|
The 2S boards have two PCI-E slots with the numbers of lanes shared,
|
|
making each slot have 8 lanes.
|
|
|
|
The iKVM boards are so called because they offer a remote real-time access
|
|
to the machine through a removable PCI management card, their hardware is
|
|
the same as the non-iKVM ones.
|
|
|
|
The SAS versions have a 4-port SAS controller and a four 7-pin SAS connectors
|
|
instead of the PCI-E 8x slot which is present in all the other board configurations.
|
|
Note: the SAS functionality is **not supported** by libreboot.
|
|
|
|
The IST versions with PCB revision 1.05G are the ones who are believed to
|
|
support the six core Opteron Istanbul processors (2400 and 8400 series).
|
|
|
|
Current issues {#issues}
|
|
==============
|
|
|
|
- There seems to be a 30 second bootblock delay (observed by
|
|
tpearson); the system otherwise boots and works as expected. See
|
|
[text/kfsn4-dre/bootlog.txt](text/kfsn4-dre/bootlog.txt) - this uses
|
|
the 'simple' bootblock, while tpearson uses the 'normal'
|
|
bootblock, which tpearson suspects may be a possible cause. This
|
|
person says that they will look into it. [This
|
|
config](http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asus/kfsn4-dre/4.0-10101-g039edeb/2015-06-27T03:59:16Z/config.txt;h=4742905c185a93fbda8eb14322dd82c70641aef0;hb=055f5df4e000a97453dfad6c91c2d06ea22b8545)
|
|
doesn't have the issue.
|
|
|
|
- Text-mode is jittery and it may not be usable, so it's recommended
|
|
to flash the BIOS with the coreboot frame-buffer image (kfsn4-dre_corebootfb.rom).
|
|
The jitter disappears if using KMS once the kernel starts, but it will
|
|
remain, if booting the kernel in text-mode.
|
|
|
|
- Booting from USB mass storage devices is not possible; neither GRUB
|
|
nor SeaBIOS detect USB drives when present. USB keyboards function
|
|
under both GRUB and SeaBIOS, albeit slowly under GRUB (several seconds per
|
|
character typed).
|
|
|
|
- To install an operating system you will need a hard disk
|
|
with a pre-installed OS otherwise you have to plug in another hard disk or
|
|
a CD/DVD reader in order to boot a copy of the installer of your OS, since
|
|
the USB booting doesn't work.
|
|
|
|
Other information
|
|
=================
|
|
|
|
[specifications](https://web.archive.org/web/20181212180051/http://ftp.tekwind.co.jp/pub/asustw/mb/Socket%20F/KFSN4-DRE/Manual/e3335_kfsn4-dre.pdf)
|
|
|